Globe Scientific

Sample Cups

<h2 dir="ltr">What are Automation Sample Cups?</h2>
 Automation sample cups (also called analyzer sample cups, autosampler cups, or J-cups) are small-volume polystyrene or polypropylene vessels designed to hold aliquoted patient specimens for direct loading into automated clinical chemistry analyzers, immunoassay platforms, hematology analyzers, and ICP-MS/ICP-OES spectrometers. They are used when an analyzer's primary tube handler cannot directly aspirate from a standard 15 mL or 50 mL collection tube&mdash;typically because the sample volume is insufficient, a diluted aliquot is required, or a specific cup geometry is mandated by the instrument's sampling needle. Globe Scientific offers the largest selection of alternate (OEM-equivalent) sample cups for laboratory analyzers, providing significant per-cup savings versus manufacturer-supplied consumables. Choose analyzer sample cups by instrument model first&mdash;dimensional compatibility is non-negotiable&mdash;then optimize for material (PS for optical clarity, PP for chemical resistance) and volume.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
0.2 mL automation sample cups for micro-volume testing
</li>
<li dir="ltr" aria-level="1">
0.5 mL sample cups for routine analyzer use
</li>
<li dir="ltr" aria-level="1">
1.5 mL sample cups for standard clinical workflows
</li>
<li dir="ltr" aria-level="1">
Clear polystyrene sample cups for accurate readings
</li>
<li dir="ltr" aria-level="1">
Conical-bottom cups for complete sample pickup
</li>
<li dir="ltr" aria-level="1">
Low-dead-volume cups for minimal sample waste
</li>
<li dir="ltr" aria-level="1">
Analyzer-compatible sample cups for clinical systems
</li>
<li dir="ltr" aria-level="1">
Disposable sample cups for single-use workflows
</li>
<li dir="ltr" aria-level="1">
Nesting cups for easy storage and handling
</li>
</ul>
<h2 dir="ltr"> How to Choose Automation Sample Cups</h2>
 Instrument Compatibility: Dimensional Match is Mandatory Automation sample cups must match the exact outer diameter, height, and cup-bottom geometry specified by the instrument manufacturer. A cup that is 0.5 mm too wide or too narrow will not seat correctly in the autosampler rotor, causing aspiration failures, pipetting errors, or instrument alarms. Globe Scientific engineers and validates each alternate cup to OEM specifications for named analyzer platforms; confirm the instrument model against the catalog's compatibility list before ordering. Volume: 0.5 mL vs. 1.5 mL vs. 2.0 mL 0.5 mL cups (13.55 &times; 24.50 mm, polystyrene) are used on chemistry analyzers including Beckman CX series, Alpha Wassermann, Bio-Chem Labs, and DPC Immulite platforms. 1.5 mL cups (13.8 &times; 22.60 mm) are used on BioMerieux AG-2/ASCA and MLA 1600C platforms. Larger 2.0 mL cups are used on Roche cobas and Horiba ABX platforms. The minimum working volume of the cup must exceed the analyzer's dead volume (typically 150&ndash;400 &micro;L) plus the required sample volume. Material: Polystyrene vs. Polypropylene Polystyrene (PS) sample cups provide excellent optical clarity for colorimetric-based analyzers that photometrically read the cup contents and have low protein adsorption for routine chemistry analytes. Polypropylene (PP) cups are used when the sample contains organic solvents, strong acids (trace element analysis), or when acid-wash protocols are required for ICP-MS autosampler systems. MoldPro and Globe Scientific PP autosampler cups for PerkinElmer, Agilent, and Shimadzu ICP systems are manufactured from virgin PP with ultra-low metal content verified by ICP-MS lot testing. With or Without Caps/Inserts Sample cups with caps are used when the aliquot must be sealed to prevent evaporation or cross-contamination during batch loading. Insert cups (smaller inner cup that sits inside a standard tube) allow aliquoted samples to be loaded directly without relabeling &mdash; a common efficiency gain in high-volume core labs. Confirm whether your instrument's autosampler accepts capped cups or requires open-top formats. ICP-MS vs. Clinical Chemistry Applications ICP-MS autosampler cups require certified ultra-low metal content (verified by ICP-MS at ppb level), manufactured from virgin PP without metal-containing additives, dyes, or fillers. Standard PS clinical chemistry cups contain low-level metal additives from colorants and should not be used for trace element or heavy metal analysis. Always use metal-free certified cups for any elemental analysis application. 
<h2 dir="ltr"> Specifications Context</h2>
 Globe Scientific analyzer sample cups are manufactured to exact OEM specifications and provide equivalent precision and optical properties to original manufacturer cups. PS cups have optical clarity with &ge;90% light transmission in the visible spectrum, required for photometric analyzers. PP ICP-MS autosampler cups meet ultra-low metal content specifications: typically &lt;1 ppb for Fe, Zn, Cu, Pb, Mn, and other analytes commonly measured in trace element panels. Cup dimensions are held to &plusmn;0.1 mm tolerance on O.D. to ensure consistent seating in autosampler rotors. As of 2026, Globe Scientific is the most widely stocked alternate analyzer consumable brand through lab distributors, including MBP, offering per-cup savings of 20&ndash;40% versus OEM pricing for high-volume clinical labs. 
<a href="https://mbpinc.net/contact-us">Contact MBP&nbsp;</a>for per-cup pricing on case-quantity PO orders.

Automation Sample Cups

110915-Analyzer Consumables Catalog

110915-TDS-110915

Sample Cup, Micro, PS, for Hitachi, Elecsys, Cobas Integra and Cobas Core, CS/6000

110915 by Globe Scientific is a micro polystyrene (PS) sample cup, 37 mm × 17 mm, designed for Hitachi, Elecsys, Cobas Integra, and Cobas Core clinical analyzers. Excellent optical clarity for photometric and ECL immunoassay detection. Supplied 1,000/bag, 6,000/case.

Manufacture

Transport Tubes

<h2 dir="ltr">What are Transport Tubes?</h2>
 Transport tubes are sterile, leak-proof screw-cap tubes used for collecting, transporting, and temporarily storing biological specimens from the collection site to the testing laboratory. They span a broad category: empty specimen containers (15 mL and 50 mL self-standing conical tubes), pre-filled saline transport tubes, UTM (Universal Transport Medium) tubes, and specialty specimen vials. All transport tubes share three required attributes&mdash;leak-proof construction, sterility confirmation, and compatibility with the downstream assay's matrix requirements. Choose the transport tube type based on the specimen, the target analyte, and the assay platform it will be processed on. 
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">5 mL transport tubes for routine sample movement</li>
<li dir="ltr" role="presentation">10 mL tubes for higher volume biological samples</li>
<li dir="ltr" role="presentation">Leak-tight screw-cap tubes for secure handling</li>
<li dir="ltr" role="presentation">Sterile transport tubes for clinical workflows</li>
<li dir="ltr" role="presentation">Graduated tubes with labeling surfaces for tracking</li>
<li dir="ltr" role="presentation">Self-standing tubes for easier bench organization</li>
</ul>
&nbsp;
<h2 dir="ltr">How to Choose Transport Tubes</h2>
 Material: Polypropylene (PP) vs. Polystyrene (PS) PP conical transport tubes are chemical-resistant, autoclavable, and certified DNase/RNase-free in molecular-grade formats. PS transport tubes (30 mL translucent format, Globe Scientific) are lighter and less expensive but not autoclavable. For nucleic acid work, DNA/RNA-free certified PP is the standard. For specimen transport requiring centrifugation, PP is preferred due to higher g-force tolerance (PP rated to &ge;10,000 &times; g in most formats). Self-Standing vs. Rack Format Self-standing (skirted-base) conical tubes stand upright without a rack, reducing knock-over risk during aliquoting and transport. Rack-based tubes require a separate holder. Globe Scientific self-standing 50 mL PP transport tubes feature a printed graduation, white frosted writing area, and are available sterile, non-sterile, or metal-free. Sterile tubes are RNase/DNase-free and pyrogen-free per the lot certificate. Sterile vs. Non-Sterile Sterile tubes (ISO 11137 radiation sterilization, SAL 10⁻⁶) are required for culture, NAAT, and any specimen where contamination would invalidate the result. Non-sterile metal-free PP tubes are suited to trace-element analysis and environmental sampling where sterility is not required but metal contamination would interfere. Volume 15 mL tubes are standard for most clinical specimen aliquots, urine transfers, and culture setups. 50 mL tubes are used for higher-volume specimens (24-hour urine aliquots, stool homogenates, bulk transport of tissue homogenates). Globe Scientific 30 mL tubes with integral spoon are designed specifically for fecal specimen self-collection. Media and Additives Empty transport tubes (no fill) are the base format; select a pre-filled tube (saline, UTM, boric acid) based on the specimen type and analyte stability requirements. For nucleic acid targets, pre-filled tubes with DNA/RNA Shield, UTM, or saline are the appropriate formats. 
<h2 dir="ltr"> Specifications Context</h2>
 Globe Scientific self-standing 50 mL conical transport tubes are manufactured from USP Class VI medical-grade PP with a conical bottom skirt for freestanding stability. Printed graduation marks (1 mL intervals) and a frosted writing area are standard features. Sterile versions are individually wrapped and certified RNase-free, DNase-free, and pyrogen-free per lot certificate, consistent with ISO 9001:2015 manufacturing standards. Non-sterile metal-free versions are supplied with a separate natural screw cap and are tested for trace metals via ICP-MS before lot release. MBP's transport tubes catalog includes Globe Scientific and NEST Scientific formats in multiple pack sizes (25/bag and bulk packs of 500). 
&nbsp;
If you need help choosing tube size or matching the right transport format to your workflow,<a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;"> the MBP team</a> can help you sort it out without overthinking it.

Transport Tube Products

Tubes, Caps & Racks Catalog

Lab Supplies for Physicians Offices

TDS - 6101 Series

TDS - 6102 Series

Screw Cap for 5mL and 10mL Transport Tubes

Globe Scientific 6103-CAP — leak-resistant, shatter-proof polypropylene screw cap for 5mL and 10mL Globe Scientific transport tubes (6101/6102 series); rated for freezing temperatures.

Screw Cap for 5mL and 10mL Transport Tubes (#'s: 6101-TUBE & 6102-TUBE), Blue, BAG/1000

Screw Cap for 5mL and 10mL Transport Tubes (#'s: 6101-TUBE & 6102-TUBE), Green, BAG/1000

Screw Cap for 5mL and 10mL Transport Tubes (#'s: 6101-TUBE & 6102-TUBE), Red, BAG/1000

Screw Cap for 5mL and 10mL Transport Tubes (#'s: 6101-TUBE & 6102-TUBE), White, BAG/1000

Screw Cap for 5mL and 10mL Transport Tubes (#'s: 6101-TUBE & 6102-TUBE), Yellow, BAG/1000

Sample Tubes

Product Literature

Screwcap Sample Tubes, Graduated

Globe Scientific 6050: 1.2 mL PP screwcap sample tube, conical bottom, external threads, self-standing. White graduations and writing area. &minus;196&deg;C to 121&deg;C. Autoclavable. Caps sold separately. 1,000/bag.

Sample Tube, 1.2mL, External Threads, PP, White Graduations & Marking Area, Conical Bottom, Self-Standing, BAG/1000

Sample Tube, 2mL, External Threads, PP, White Graduations & Marking Area, Round Bottom, BAG/1000

Sample Tube, 2mL, External Threads, PP, White Graduations & Marking Area, Round Bottom, Self-Standing, BAG/1000

Sample Tube, 3mL, External Threads, PP, White Graduations & Marking Area, Round Bottom, Self-Standing, BAG/1000

Sample Tube, 4mL, External Threads, PP, White Graduations & Marking Area, Round Bottom, BAG/1000

Sample Tube, 4mL, External Threads, PP, White Graduations & Marking Area, Round Bottom, Self-Standing, BAG/1000

Sample Tube, 5mL, External Threads, PP, White Graduations & Marking Area, Round Bottom, BAG/1000

Sample Tube, 5mL, External Threads, PP, White Graduations & Marking Area, Round Bottom, Self-Standing, BAG/1000

Brochure

Screwcap Sample Tubes, Non-Graduated

6030 by Globe Scientific is a non-graduated polypropylene screwcap sample tube rated to 17,000×g and −196°C to +121°C. External threading yields a smooth inner wall; available in 1.2–5 mL volumes, round/conical/self-standing bases, and optional silicone O-ring cap. 1,000/bag. Suitable for biobanking, DNA/RNA storage, and high-speed centrifugation. Order from MBP, a registered vendor to Howard Hughes Medical Institute, Vanderbilt University, MD Anderson Cancer Center, Eurofins, and many other institutes across the USA.

Sample Tube, 1.2mL, External Threads, PP, Conical Bottom, Self-Standing, BAG/1000

Sample Tube, 2mL, External Threads, PP, Round Bottom, BAG/1000

Sample Tube, 2mL, External Threads, PP, Round Bottom, Self-Standing, BAG/1000

Sample Tube, 3mL, External Threads, PP, Round Bottom, Self-Standing, BAG/1000

Sample Tube, 4mL, External Threads, PP, Round Bottom, BAG/1000

Sample Tube, 4mL, External Threads, PP, Round Bottom, Self-Standing, BAG/1000

Sample Tube, 5mL, External Threads, PP, Round Bottom, BAG/1000

Sample Tube, 5mL, External Threads, PP, Round Bottom, Self-Standing, BAG/1000

Screwcap with O-Ring for Sample Tubes

6137 by Globe Scientific is a polypropylene screwcap with a silicone washer for Globe Scientific sample tubes with external threads. Fast-thread single-turn design; leakproof from −196°C to 121°C, centrifuge-rated to 17,000 × g, and autoclavable. Bag of 1000; nine colors available for sample coding.

Screw Cap, with Silicone Washer for Sample Tubes with External Threads (#'s: 6030-6059), Clear, BAG/1000

Screw Cap with Silicone Washer for Sample Tubes with External Threads (#'s: 6030-6059), Gray, BAG/1000

Screw Cap with Silicone Washer for Sample Tubes with External Threads (#'s: 6030-6059), Blue, BAG/1000

Screw Cap with Silicone Washer for Sample Tubes with External Threads (#'s: 6030-6059), Green, BAG/1000

Screw Cap with Silicone Washer for Sample Tubes with External Threads (#'s: 6030-6059), Lilac, BAG/1000

Screw Cap with Silicone Washer for Sample Tubes with External Threads (#'s: 6030-6059), Orange, BAG/1000

Screw Cap with Silicone Washer for Sample Tubes with External Threads (#'s: 6030-6059), Red, BAG/1000

Screw Cap, with Silicone Washer for Sample Tubes with External Threads (#'s: 6030-6059), White, BAG/1000

Screw Cap with Silicone Washer for Sample Tubes with External Threads (#'s: 6030-6059), Yellow, BAG/1000

Screwcap without O-Ring for Sample Tubes

Globe Scientific 6136 — polypropylene screwcap without O-ring for Globe Scientific sample tubes. Temperature range −196°C to 121°C; compatible tube systems rated to 17,000×g. Suits cryogenic storage (vapor-phase LN2), autoclave sterilization, and high-speed centrifugation workflows.

Screw Cap for Sample Tubes with External Threads (#'s: 6030-6059), Clear, BAG/1000

Screw Cap for Sample Tubes with External Threads (#'s: 6030-6059), Gray, BAG/1000

Screw Cap, for Sample Tubes with External Threads (#'s: 6030-6059), Blue, BAG/1000

Screw Cap, for Sample Tubes with External Threads (#'s: 6030-6059), Green, BAG/1000

Screw Cap for Sample Tubes with External Threads (#'s: 6030-6059), Lilac, BAG/1000

Screw Cap, for Sample Tubes with External Threads (#'s: 6030-6059), Orange, BAG/1000

Screw Cap, for Sample Tubes with External Threads (#'s: 6030-6059), Red, BAG/1000

Screw Cap, for Sample Tubes with External Threads (#'s: 6030-6059), White, BAG/1000

Screw Cap, for Sample Tubes with External Threads (#'s: 6030-6059), Yellow, BAG/1000

Centrifuge Tubes

<h2>What Are Centrifuge Tubes?</h2>
 Centrifuge tubes are cylindrical laboratory containers with caps that are used to separate, pellet, and store biological or chemical samples through centrifugal force. They are commonly made from polypropylene (PP) or polystyrene (PS) and are available in sizes ranging from small 0.5 mL microtubes to larger 50 mL conical tubes. These tubes are widely used for cell pelleting, protein precipitation, DNA and RNA extraction, tissue homogenate clarification, and long-term sample storage. Depending on the material, they can withstand temperatures from &minus;80 &deg;C to +121 &deg;C.
In short, the best centrifuge tube depends on your centrifuge rotor, required g-force, sample volume, and sterility needs. 
<h2>What You Will Find: </h2>
<ul>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes" title="All Centrifuge Tubes">All Centrifuge Tubes</a>: Comprehensive selection of 15 mL and 50 mL conical tubes with clear graduations for daily lab workflows.</li>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/oak-ridge-style-centrifuge-tubes" title="Oak Ridge Style Centrifuge Tubes">Oak Ridge Style Centrifuge Tubes</a>: High-speed, chemical-resistant tubes designed to withstand extreme RCF without deformation.</li>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/centrifuge-bottles" title="Centrifuge Bottles">Centrifuge Bottles</a>: Heavy-duty, larger-capacity vessels engineered for bulk sample processing and high-velocity runs.</li>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/large-volume-centrifuge-tubes" title="Large Volume Centrifuge Tubes">Large Volume Centrifuge Tubes</a>: Industrial-strength 250 mL and 500 mL tubes optimized for pilot-scale harvesting and bioprocessing.</li>
</ul>
&nbsp;
<h2>How to Choose Centrifuge Tubes</h2>
 Volume and Rotor Compatibility
Select a tube size that matches both your sample volume and centrifuge rotor. Microtubes ranging from 0.5&ndash;2 mL are commonly used in microcentrifuges and can typically handle speeds up to 20,000 &times; g. Midi tubes in the 5&ndash;10 mL range are suitable for intermediate sample volumes, while 15 mL and 50 mL conical tubes are commonly used in clinical, research, and preparative centrifuges.
Material: Polypropylene vs. Polystyrene
Polypropylene (PP) tubes offer excellent chemical resistance and can tolerate temperatures from &minus;80 &deg;C to +121 &deg;C. They are suitable for autoclaving and exposure to many laboratory solvents. Polystyrene (PS) tubes provide superior optical clarity, making it easier to visually inspect samples and liquid levels, but they have lower resistance to solvents and extreme temperatures.
Sterility and Contamination Control
Sterile centrifuge tubes are typically gamma- or E-beam-irradiated and certified free of RNase, DNase, and pyrogens. These tubes are recommended for RNA extraction, cell culture, and clinical applications where contamination must be minimized. Non-sterile tubes may still be RNase- and DNase-free and are often suitable for routine DNA work and general sample storage.
Cap Design
Attached screw caps help prevent cap mix-ups and sample contamination, especially in high-throughput laboratories. Separate caps can be quicker to open and may be preferred in workflows that require frequent access to samples. If tubes will be used with automated systems, cap dimensions should be verified for compatibility with liquid handling equipment.
Packaging Options
Racked tubes provide convenient organization and allow direct pipetting while the tubes remain in the rack. Bulk-bagged tubes offer a more economical option for laboratories that process large volumes of samples and already have tube storage systems in place.
<h2> Comparing Common Centrifuge Tube Types</h2>
 Microtubes (0.5&ndash;2 mL) are ideal for PCR preparation, microcentrifuge applications, and storage of small sample volumes. They can generally withstand centrifugal forces up to 20,000 &times; g.
Midi tubes (5&ndash;10 mL) are designed for intermediate sample volumes such as culture supernatants and can typically tolerate forces up to 16,000 &times; g.
Sterile 15 mL conical tubes are frequently used for cell pelleting, RNA extraction, and clinical sample processing, with typical ratings between 12,000 and 15,000 &times; g.
Sterile 50 mL conical tubes are commonly selected for larger-volume applications including tissue culture work, density gradient preparation, and large-scale sample processing.
Polystyrene conical tubes in 15 mL and 50 mL formats are often chosen when visual sample inspection is important and solvent exposure is minimal.
<h2> Specifications and Features</h2>
 Polypropylene centrifuge tubes from Globe Scientific and Nest Scientific are manufactured from USP Class VI virgin resin and do not contain plasticizers or processing additives. Sterile products are typically irradiated to achieve a sterility assurance level (SAL) of 10⁻⁶. Most 15 mL tubes feature graduation marks at 1 mL intervals, while 50 mL tubes are usually graduated every 5 mL. MBP offers both bagged and racked centrifuge tube formats, including 15 mL and 50 mL conical tubes as well as smaller microtube and midi tube options.
MBP supports procurement departments by accepting purchase orders and offering institutional pricing for qualified high-volume customers. <a href="https://mbpinc.net/contact-us">Contact the MBP team today</a> for a customized quote.

<h2 data-section-id="132783j" data-start="0" data-end="34">What Are Microcentrifuge Tubes?</h2>
&nbsp;
Microcentrifuge tubes are small-volume polypropylene or low-binding polypropylene vessels available in 0.5 mL, 1.5 mL, and 2.0 mL capacities. They are designed for use in fixed-angle and variable-speed microcentrifuges and are commonly used for sample preparation, DNA and RNA isolation, protein purification, enzyme reaction setup, and cryogenic sample storage. Depending on the application, these tubes are available with either hinged snap caps or threaded screw caps that help protect samples from leakage, contamination, and evaporation during centrifugation and storage.
Microcentrifuge tubes are essential consumables in molecular biology, biochemistry, clinical chemistry, proteomics, and genomics laboratories. Among all formats, the 1.5 mL snap-cap tube remains the most widely used microcentrifuge tube in routine molecular biology workflows.
Use 1.5 mL snap-cap polypropylene tubes for general molecular biology applications, 2.0 mL tubes for bead-based extraction and precipitation workflows, screw-cap tubes for volatile or valuable samples, and low-binding tubes for dilute proteins or nucleic acids.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
0.5mL, 0.6mL, 1.5mL, 2.0mL, 5.0mL (for small-volume to high-volume applications)
</li>
</ul>
<ul>
<li dir="ltr" aria-level="1">
Tubes only: Snap-cap, one-hand use
</li>
<li dir="ltr" aria-level="1">
O-ring caps: Leak-proof, secure seal
</li>
<li dir="ltr" aria-level="1">
Sterile: RNase/DNase-free for sensitive work
</li>
<li dir="ltr" aria-level="1">
Non-sterile: Cost-effective for general use
</li>
</ul>
&nbsp;
<h2 data-section-id="1yp6iwa" data-start="1166" data-end="1204">How to Choose Microcentrifuge Tubes</h2>
&nbsp;
Volume: 0.5 mL / 1.5 mL / 2.0 mL
&nbsp;0.5 mL tubes minimize dead volume for concentrated or precious samples and fit compact block heaters. 1.5 mL is the universal format compatible with virtually all microcentrifuge rotors, heating blocks, and automated liquid handlers. 2.0 mL provides extra headspace for vortex mixing and bead-based extraction protocols; the slightly wider diameter is also compatible with most 1.5 mL rotor slots.
Cap Style: Snap Cap vs Screw Cap
Snap-cap microcentrifuge tubes feature hinged lids that allow quick one-handed operation and are preferred for high-throughput laboratory workflows involving frequent pipetting.
Screw-cap tubes equipped with O-rings or sealing rings provide a hermetic seal capable of withstanding centrifugal forces up to 20,000 &times; g. These tubes are recommended for volatile reagents, repeated freeze-thaw cycles, and long-term storage at ultra-low temperatures. Laboratories requiring enhanced sample security often select screw-cap formats for valuable or irreplaceable specimens.
Standard vs Low-Binding Polypropylene
Standard polypropylene microcentrifuge tubes are suitable for most routine laboratory applications. Low-binding polypropylene tubes are designed to reduce sample adsorption to tube walls and are particularly beneficial when working with dilute proteins, low-concentration nucleic acids, or single-cell samples where maximizing recovery is critical.
Bottom Geometry: Conical vs Self-Standing
Conical-bottom tubes concentrate pellets at the tip of the tube, improving sample recovery and simplifying resuspension after centrifugation.
Self-standing tubes feature a flat base that allows them to remain upright without a rack, making them convenient for sample handling, labeling, and storage. While they offer greater bench-top convenience, pellets may form slightly off-center compared with traditional conical-bottom designs.
&nbsp;
<h2 data-section-id="11skgd4" data-start="3407" data-end="3446">Compare Microcentrifuge Tube Formats</h2>
&nbsp;
Snap-cap conical polypropylene microcentrifuge tubes are available in 0.5 mL, 1.5 mL, and 2.0 mL capacities. Rated to approximately 16,000 &times; g, they are the standard choice for molecular biology, PCR preparation, nucleic acid extraction, and enzyme reaction workflows.
Screw-cap polypropylene tubes with O-rings are offered in 1.5 mL and 2.0 mL formats with either conical or flat-bottom designs. These tubes can withstand centrifugal forces up to 20,000 &times; g and are commonly used for volatile samples, cryogenic storage, and biobanking applications.
Self-standing screw-cap microcentrifuge tubes are available in 0.5 mL, 1.5 mL, and 2.0 mL capacities. Featuring sealing rings and flat-bottom construction, they provide stable rack-free storage and are often used in color-coded sample management systems. These tubes are typically rated up to 20,000 &times; g.
Amber polypropylene microcentrifuge tubes are available with either snap caps or screw caps in 1.5 mL and 2.0 mL sizes. Designed for light-sensitive compounds, they help protect samples from light exposure while supporting centrifugation up to approximately 16,000 &times; g.
Dispenser-box snap-cap microcentrifuge tubes are commonly available in 1.5 mL and 2.0 mL formats and are packaged for convenient bench-top dispensing. They are ideal for high-throughput laboratories that process large numbers of samples and require efficient access to consumables.
&nbsp;
<h2 data-section-id="1jl751w" data-start="4881" data-end="4906">Specifications Context</h2>
&nbsp;
Globe Scientific microcentrifuge tubes are manufactured from USP Class VI virgin polypropylene and are certified RNase-free, DNase-free, and non-pyrogenic by lot under ISO 9001:2015 quality management standards. Nest Scientific microcentrifuge tubes are similarly manufactured to USP Class VI specifications and are available in self-standing formats with six cap color options for simplified sample organization.
Standard packaging configurations include 500 tubes per case for snap-cap formats and 500 tubes per case supplied in 50-tube packs for screw-cap variants. As of 2026, MBP stocks both dispenser-box snap-cap tubes and screw-cap microcentrifuge tube formats, with bulk purchasing options available for high-volume laboratories.
Achieve consistent results with secure, medical-grade centrifugation vessels. <a href="https://mbpinc.net/contact-us" title="Contact Molecular Biology Products Inc." style="color: #236fa1; text-decoration: underline;">Contact Molecular Biology Products Inc.</a> for a quote to upgrade your workflow.

Microcentrifuge Tubes

<h2 data-section-id="155qizo" data-start="0" data-end="33">What Are All Centrifuge Tubes?</h2>
&nbsp;
The All Centrifuge Tubes collection includes the complete range of tube sizes commonly used in research, clinical, and laboratory environments. These tubes range from small 0.5 mL and 1.5&ndash;2 mL microtubes used in microcentrifuge applications to 5 mL and 10 mL midi tubes for intermediate sample volumes, as well as 15 mL and 50 mL conical tubes designed for cell culture, density gradient preparation, and larger-volume sample processing. They are available in polypropylene (PP) for enhanced chemical resistance and temperature tolerance or polystyrene (PS) for improved optical clarity.
&nbsp;
What you will find:
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/microcentrifuge-tubes" title="Microcentrifuge Tubes">Microcentrifuge Tubes</a> &ndash; Precision-engineered for small-volume sample preparation.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/screw-cap-tubes" title="Screw Cap Tubes">Screw Cap Tubes</a> &ndash; Secure, leak-proof closures for long-term storage and transport.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/15ml-and-50ml-centrifuge-tubes" title="15ml &amp; 50ml Centrifuge Tubes">15ml &amp; 50ml Centrifuge Tubes</a> &ndash; Standard conical bottom tubes for large-volume processing.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/midicentrifuge-tubes-5ml-and-10ml" title="Midicentrifuge Tubes (5ml &amp; 10ml)">Midicentrifuge Tubes (5ml &amp; 10ml)</a> &ndash; The perfect bridge for intermediate sample sizes.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/microtubes-box" title="Microtubes Box">Microtubes Box</a> &ndash; Durable storage racks for organized sample management and protection.
</li>
</ul>
&nbsp;
<h2 data-section-id="1f93yys" data-start="914" data-end="963">How to Choose From All Centrifuge Tube Formats</h2>
&nbsp;
Volume and Rotor Compatibility
Selecting the correct tube size is essential for safe and efficient centrifugation. Microtubes ranging from 0.5&ndash;2 mL are designed for microcentrifuges, while 5&ndash;10 mL midi tubes fit compatible benchtop centrifuge rotors. Larger 15 mL and 50 mL conical tubes are commonly used in clinical and research centrifuges. Always verify rotor compatibility before introducing a new tube format into your workflow.
Sterility Requirements
For sensitive applications such as RNA extraction, cell culture, and clinical diagnostics, sterile tubes certified free of RNase, DNase, and pyrogens are recommended. Non-sterile tubes can provide a cost-effective solution for routine DNA analysis, protein assays, and general sample storage where sterility is not critical.
Material Selection
Polypropylene tubes offer excellent durability, can be autoclaved at 121 &deg;C, and resist many laboratory chemicals and solvents. Polystyrene tubes provide superior transparency, making it easier to monitor liquid levels and sample contents, although they are less resistant to heat and solvents.
Packaging and Inventory Planning
Microtubes are commonly available in pack sizes ranging from 500 to 1,000 units, while 15 mL and 50 mL conical tubes are often supplied in cases of 500. Laboratories with consistent usage may benefit from establishing recurring purchase orders to ensure uninterrupted supply.
&nbsp;
<h2 data-section-id="urfo3f" data-start="2395" data-end="2433">Compare Centrifuge Tube Size Groups</h2>
&nbsp;
Microtubes (0.5&ndash;2 mL) are primarily used for PCR preparation, microcentrifuge applications, and storage of small sample volumes. These are typically manufactured from polypropylene and are available in pack sizes of 500&ndash;1,000 units.
Midi tubes (5&ndash;10 mL) support intermediate-volume centrifugation and supernatant collection. They are commonly made from polypropylene and supplied in packs ranging from 100&ndash;500 units.
15 mL conical tubes are widely used for cell pelleting, RNA isolation, and clinical sample processing. They are available in both polypropylene and polystyrene formats and are generally packaged in cases of 500.
50 mL conical tubes are designed for larger-volume workflows, including tissue culture, density gradient preparation, and sample processing. Like 15 mL tubes, they are available in polypropylene and polystyrene and are commonly sold in cases of 500.
&nbsp;
<h2 data-section-id="1ezckh3" data-start="3318" data-end="3348">Specifications and Features</h2>
&nbsp;
Globe Scientific and Nest Scientific centrifuge tubes are manufactured from USP Class VI virgin polypropylene or polystyrene resin and are certified free from detectable RNase, DNase, and pyrogens. Sterile products are irradiated using gamma or E-beam methods to achieve a sterility assurance level (SAL) of 10⁻⁶. MBP offers both racked and bagged formats for 15 mL and 50 mL conical tubes, along with dispenser-box options for selected microtube product lines that support efficient use in high-throughput laboratory environments.
For procurement teams, MBP accepts purchase orders and offers institutional pricing for bulk and high-volume purchases. <a href="https://mbpinc.net/contact-ushttps://mbpinc.net/contact-us" title="Contact the MBP team" style="color: #236fa1;">Contact the MBP team</a> today to learn more

All Centrifuge Tubes

111671-Group-Tubes, Caps & Racks Catalog

Screwcaps with O-Ring for Microcentrifuge Tubes

111671B by Globe Scientific are blue polypropylene screwcaps with a clear nitrile O-ring for all Globe screw-top microcentrifuge tubes. The O-ring delivers a leakproof seal for sample integrity during freezing, centrifugation, and transport. Autoclavable; supplied in bags of 1000. Multiple colors available across the 111671 line.

Screw Cap for Microtube, with O-Ring, Clear, BAG/1000

Screw Cap for Microtube, with O-Ring, White, BAG/1000

Screw Cap for Microtube, with O-Ring, Blue, BAG/1000

Screw Cap for Microtube, with O-Ring, Green, BAG/1000

Screw Cap for Microtube, with O-Ring, Red, BAG/1000

Screw Cap for Microtube, with O-Ring, Yellow, BAG/1000

111672-Group-Tubes, Caps & Racks Catalog

Screwcaps without O-Ring for Microcentrifuge Tubes

111672B by Globe Scientific are blue polypropylene screwcaps without an O-ring, designed for all Globe Scientific screw-top microcentrifuge tubes. Provides a reliable threaded closure for routine bench-top storage and standard centrifugation. Autoclavable; bag of 1000. Multiple colors available in the 111672 line.

Screw Cap for Microtube, No O-Ring, Clear, BAG/1000

Screw Cap for Microtube, No O-Ring, White, BAG/1000

Screw Cap for Microtube, No O-Ring, Blue, BAG/1000

Screw Cap for Microtube, No O-Ring, Green, BAG/1000

Screw Cap for Microtube, No O-Ring, Red, BAG/1000

Screw Cap for Microtube, No O-Ring, Yellow, BAG/1000

ESR Systems

<h2 dir="ltr">What are ESR Systems?</h2>
 Erythrocyte sedimentation rate (ESR) systems are the consumables, tubes, and instruments used to measure how quickly red blood cells (erythrocytes) settle to the bottom of a standardized vertical tube over one hour &mdash; a nonspecific but widely used marker of systemic inflammation, infection, autoimmune activity, and malignancy. Choose Westergren tube-based ESR consumables for the ICSH reference method; choose closed-tube automated systems to reduce biohazard exposure and turnaround time in high-throughput clinical laboratories.
&nbsp;
<h2 dir="ltr">What You Will Find:<a href="sedi-rate-esr-westergren-system" title="Sedi-Rate ESR Westergren System"></a></h2>
&nbsp;
<ul>
<li data-section-id="vpm8z3" data-start="25" data-end="122">Sedi-Rate ESR Westergren systems for standardized erythrocyte sedimentation rate (ESR) testing.</li>
<li data-section-id="1tk7hk6" data-start="123" data-end="187">Westergren ESR pipettes compatible with Sedi-Rate ESR systems.</li>
<li data-section-id="1utc92a" data-start="274" data-end="387" data-is-last-node="">ESR testing products designed for reliable Westergren sedimentation rate measurements in clinical laboratories.</li>
<li data-section-id="1utc92a" data-start="274" data-end="387" data-is-last-node=""><a href="esr-systems/esr-system-accessories" title="Accessories for ESR System" style="color: #236fa1;">ESR System Accessories</a> &ndash; Essential support tools including racks and stabilizers for organized and vibration-free sample positioning.</li>
</ul>
<h2 dir="ltr"> How to Choose ESR Systems</h2>
 Manual Westergren vs. Automated Closed-Tube The manual Westergren method uses open-top glass or plastic 200 mm tubes filled with diluted blood and read manually at 60 minutes &mdash; reproducible, low-cost, but biohazard-exposed and slow (one rack per hour). Closed-tube automated systems (e.g., Greiner VACUETTE, Alifax TEST1, Streck Sedimat) use sealed vacuum-draw ESR tubes pre-filled with sodium citrate that eliminate dilution and open-tube handling; automated readers record RBC fall in real time and report in as little as 20&ndash;30 minutes. Choose automated systems for labs processing &gt;30 ESR tests per shift. Tube Type: Citrate vs. EDTA-Based Methods The standard Westergren method requires 3.8% sodium citrate (9:1 blood: citrate ratio, or 4:1 blood:0.4 mL citrate). The modified Westergren method uses EDTA-anticoagulated blood diluted 4:1 with 0.85% saline, making it compatible with the K2 EDTA tubes routinely drawn for CBC &mdash; practical for labs that want to batch ESR onto an existing EDTA draw. Results from citrate and EDTA-saline methods are comparable when dilution is controlled. Westergren Tube Specifications Westergren tubes are 300 mm total length (usable 200 mm graduated column), bore 2.5&ndash;2.7 mm I.D., graduated in mm from 0 at the top to 200 at the bottom. Tubes may be glass or plastic. Kits such as Sediplast (Polymedco) and Vacuette ESR (Greiner) include a self-zeroing pipette that draws blood to the zero mark automatically, eliminating the manual zeroing step and reducing biohazard exposure. Rack and Stand Requirements Manual Westergren tubes must be held perfectly vertical (within &plusmn;2&deg; of vertical) at a stable temperature (18&ndash;25 &deg;C) for the full 60-minute reading period. Temperature variation of &plusmn;3 &deg;C can change ESR by 3&ndash;5 mm/h. Rack kits with leveling feet ensure the required vertical alignment. Reference Ranges and Interpretation Normal ESR: males &lt;50 years, &le;15 mm/h; males &ge;50 years, &le;20 mm/h; females &lt;50 years, &le;20 mm/h; females &ge;50 years, &le;30 mm/h (Westergren method, ICSH 1993). ESR is ordered alongside CRP and CBC; neither result should be interpreted in isolation. 
<h2 dir="ltr"> Specifications Context</h2>
 The Westergren tube complies with ICSH/CLSI specification: 300 mm total length, 2.5 mm &plusmn; 0.1 mm bore, graduated 0&ndash;200 mm. The 60-minute incubation must occur at 18&ndash;25 &deg;C; each &deg;C increase above 25 &deg;C raises ESR by approximately 0.7 mm/h (ICSH). Blood specimen for manual ESR: 2.0 mL minimum of EDTA whole blood (K2 EDTA, lavender-top) or sodium citrate vacuum tube; process within 4 hours of collection at room temperature or within 24 hours if refrigerated at 2&ndash;8 &deg;C per CLSI H02-A6. The ICSH-endorsed Westergren method has been the gold standard for ESR since 1973; automated photometric systems correlate with the Westergren reference method at r &ge; 0.95 per published peer-reviewed comparisons.
&nbsp;
If you need help selecting ESR consumables, the <a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;">MBP team</a> is here to answer all queries.

3479-Group-ESR Catalog

Sedi-Rate ESR System from Globe Scientific

Sedi-Rate ESR Westergren Pipette

3479 by Globe Scientific is the EZ-Rate™ Westergren ESR pipette for use with 13mm sodium citrate blood collection tubes. Graduated 0–180mm for direct-read results after a 60-minute incubation period. Polystyrene construction with a self-sealing fibrous aerosol barrier at the zero mark. Box of 100; bulk case of 2000 (SKU 3480) available. Pairs with the Sedi-Rate accessory line (SKU 3472, 3452, 3459).

ESR: EZ-Rate Westergren Pipette, 100 Tests (For use with 13mm Blood Collection Tube), BOX/100

ESR: EZ-Rate Westergren Pipette, 200 Tests (For use with 13mm Blood Collection Tube), BOX/200

ESR: EZ-Rate Westergren Pipette, 200 Tests/Box, 10 Boxes/Unit (For use with 13mm Blood Collection Tube), CS/2000

ESR: EZ-Rate Westergren Pipette, 800 Tests (For use with 13mm Blood Collection Tube), CS/800

ESR Catalog

MSDS

Sedi-Rate Instructions

Sedi-Rate ESR Westergren System

The 3469 by Globe Scientific is a closed-system Westergren ESR kit combining a polystyrene pipette (graduated 0–180 mm) with a polypropylene vial pre-filled with 0.25 mL of 3.8% trisodium citrate, delivering the standard 1:4 blood-to-citrate ratio in a single step. A patented self-sealing fibrous plug at the zero mark and a resealable stopper minimize aerosol exposure during clinical and research ESR determinations. Available in 100-, 200-, and 600-test packs

ESR: Sedi-Rate Westergren System, Pipettes and Citrate Vials, 100 Tests, CS/1000

ESR: Sedi-Rate Westergren System, Pipettes and Citrate Vials, 100 Tests/Box, 10 Boxes/Unit, CS/1000

ESR: Sedi-Rate Westergren System with 10-Place PS Rack, Pipettes and Citrate Vials, 100 Tests/Box, BOX/100

ESR: Sedi-Rate Westergren Starter Kit, (Includes: 100 Test Kit, Rack, Leveling Support, ESR Pipettes & Funnels)

ESR: Sedi-Rate Westergren System, Pipettes and Citrate Vials, Bulk, 200 Tests, BOX/200

ESR: Sedi-Rate Westergren System, Pipettes and Citrate Vials, Bulk, 600 Tests, CS/600

Hotplate & Stirrer Accessories

<h2>What Are Hotplate and Stirrer Accessories?</h2>
&nbsp;
Hotplate and stirrer accessories are supplementary components for single-position and multi-position hotplate stirrers that improve temperature accuracy, expand vessel compatibility, enable reflux setups, and maintain equipment in working condition. The most important accessory for research-grade hotplate use is an external temperature probe, which monitors actual solution temperature rather than hotplate surface temperature, which can be 20 to 50 degrees C higher than the liquid in the vessel. PTFE stir bars in standard cylindrical, oval, octagonal, cross-shaped, and polygon geometries allow matching of bar shape to vessel type and mixing requirement. Support rods and clamp assemblies secure condensers, separating funnels, and other glassware above the hotplate for reflux chemistry. Magnetic stir bar retrieval wands recover stir bars from flasks without contaminating the solution. An external temperature probe is the single most impactful hotplate stirrer accessory: without one, you are controlling plate temperature, not solution temperature, and the two can differ by 20 to 50 degrees C.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li data-section-id="dpsp0x" data-start="25" data-end="139">Temperature sensors for compatible GHS-series hotplate stirrers, available in standard and glass-coated designs.</li>
<li data-section-id="yvvor4" data-start="140" data-end="248">Sensor support stands and clamps for secure positioning of temperature probes during heating applications.</li>
<li data-section-id="hdqu1" data-start="249" data-end="353">Support rods and clamp sets for mounting laboratory apparatus and accessories above hotplate stirrers.</li>
<li data-section-id="rtdv85" data-start="354" data-end="446">Magnetic stir bars, including standard and pivot ring styles, for efficient sample mixing.</li>
<li data-section-id="1hl26tt" data-start="447" data-end="560" data-is-last-node="">Chemically resistant clamp set options featuring inert PTFE construction for demanding laboratory environments.</li>
</ul>
&nbsp;
<h2>How to Choose Hotplate and Stirrer Accessories</h2>
&nbsp;
External temperature probes
Confirm probe type compatibility with the hotplate stirrer model: most digital hotplate stirrers accept either a PT1000 resistance temperature detector (RTD) or a Type K thermocouple, and these are not interchangeable between models. The probe is inserted directly into the solution and feeds temperature data back to the PID controller to maintain the solution (not the plate surface) at the setpoint. Probe length and sheath material (stainless steel, glass, or PTFE) should be matched to the vessel size and chemical compatibility requirements.
PTFE stir bars: geometry and size
PTFE stir bars are available in cylindrical, oval (egg-shaped), octagonal, cross (X-shape), polygon, and ring geometries. Cylindrical bars are the most common general-purpose format. Octagonal bars provide more turbulent mixing in flat-bottomed vessels than cylindrical bars. Cross-shaped bars improve mixing in round-bottom flasks by preventing the bar from riding the wall. Ring or hoop bars are used for mixing around fixed probes or frits inside the vessel. Stir bar length is selected to match vessel diameter, typically 30 to 50% of vessel inner diameter.
Support stands and clamp sets.
Support stands (rod-and-base assemblies) mount above or adjacent to the hotplate to hold condensers, addition funnels, thermometers, and other glassware in reflux setups. Confirm rod diameter compatibility with the clamp set (most lab glassware clamps fit 12.7 mm or 16 mm rods). Weighted bases provide stability for tall assemblies. Crossbar assemblies allow horizontal positioning of clamps at adjustable heights along the support rod.
Magnetic stir bar retrieval tools
Stir bar retrievers are magnetic wands encased in a non-contaminating sleeve (PTFE or glass) that attract and remove the stir bar from a vessel without inserting fingers or metal into the sample. Available as handheld wands or bench-mounted extractors. An essential accessory for labs processing multiple samples per day, as losing track of stir bars is among the most common minor equipment management issues in bench chemistry.
Replacement sensors and calibration weights
Temperature probes degrade after repeated heating cycles or chemical exposure; replace probes showing drift against a calibrated reference thermometer. For hotplate stirrer models with external calibration weights (balance verification), confirm the weight set is OIML or ASTM traceable for regulated workflows.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
PTFE stir bars should be inspected regularly for chipped or worn PTFE coating. Bare metal exposure from a chipped bar contaminates the sample with metallic particles and alters the bar's magnetic coupling properties, resulting in reduced mixing efficiency or bar stall at lower speeds. Discard and replace any stir bar showing PTFE damage. For regulated lab environments (GMP, ISO 17025), maintain a stir bar inventory log and retire bars on a scheduled basis. External temperature probes rated for immersion in aqueous solutions should be verified against a calibrated reference thermometer at least annually; probes showing more than 1 degree C deviation should be recalibrated or replaced.&nbsp;
&nbsp;
Looking for that one missing piece to complete your setup? Browse our accessories collection and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a friendly quote today.

Sensor support stand and clamp, for use with GHS-550 models

The GHS-STD by Globe Scientific is a sensor support stand and clamp accessory for Globe Scientific GHS-550 series hotplate stirrers. It provides a stable mounting point for external temperature probes (PT1000), enabling precise in-sample temperature measurement during stirring operations in research and analytical laboratories.

Sensor support stand and clamp, small, for use with GHS-380 models

The GHS-STDSM by Globe Scientific is a sensor support stand and clamp (small) sized for GHS-380 hotplate stirrer models. It holds temperature probes and sensors in a fixed, repeatable position during heated stirring applications. Sold individually; for GHS-550 models, use the GHS-STD instead.

United States

Texas

mbpinc