Globe Scientific

Sample Cups

<h2 dir="ltr">What are Automation Sample Cups?</h2>
 Automation sample cups (also called analyzer sample cups, autosampler cups, or J-cups) are small-volume polystyrene or polypropylene vessels designed to hold aliquoted patient specimens for direct loading into automated clinical chemistry analyzers, immunoassay platforms, hematology analyzers, and ICP-MS/ICP-OES spectrometers. They are used when an analyzer's primary tube handler cannot directly aspirate from a standard 15 mL or 50 mL collection tube&mdash;typically because the sample volume is insufficient, a diluted aliquot is required, or a specific cup geometry is mandated by the instrument's sampling needle. Globe Scientific offers the largest selection of alternate (OEM-equivalent) sample cups for laboratory analyzers, providing significant per-cup savings versus manufacturer-supplied consumables. Choose analyzer sample cups by instrument model first&mdash;dimensional compatibility is non-negotiable&mdash;then optimize for material (PS for optical clarity, PP for chemical resistance) and volume.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
0.2 mL automation sample cups for micro-volume testing
</li>
<li dir="ltr" aria-level="1">
0.5 mL sample cups for routine analyzer use
</li>
<li dir="ltr" aria-level="1">
1.5 mL sample cups for standard clinical workflows
</li>
<li dir="ltr" aria-level="1">
Clear polystyrene sample cups for accurate readings
</li>
<li dir="ltr" aria-level="1">
Conical-bottom cups for complete sample pickup
</li>
<li dir="ltr" aria-level="1">
Low-dead-volume cups for minimal sample waste
</li>
<li dir="ltr" aria-level="1">
Analyzer-compatible sample cups for clinical systems
</li>
<li dir="ltr" aria-level="1">
Disposable sample cups for single-use workflows
</li>
<li dir="ltr" aria-level="1">
Nesting cups for easy storage and handling
</li>
</ul>
<h2 dir="ltr"> How to Choose Automation Sample Cups</h2>
 Instrument Compatibility: Dimensional Match is Mandatory Automation sample cups must match the exact outer diameter, height, and cup-bottom geometry specified by the instrument manufacturer. A cup that is 0.5 mm too wide or too narrow will not seat correctly in the autosampler rotor, causing aspiration failures, pipetting errors, or instrument alarms. Globe Scientific engineers and validates each alternate cup to OEM specifications for named analyzer platforms; confirm the instrument model against the catalog's compatibility list before ordering. Volume: 0.5 mL vs. 1.5 mL vs. 2.0 mL 0.5 mL cups (13.55 &times; 24.50 mm, polystyrene) are used on chemistry analyzers including Beckman CX series, Alpha Wassermann, Bio-Chem Labs, and DPC Immulite platforms. 1.5 mL cups (13.8 &times; 22.60 mm) are used on BioMerieux AG-2/ASCA and MLA 1600C platforms. Larger 2.0 mL cups are used on Roche cobas and Horiba ABX platforms. The minimum working volume of the cup must exceed the analyzer's dead volume (typically 150&ndash;400 &micro;L) plus the required sample volume. Material: Polystyrene vs. Polypropylene Polystyrene (PS) sample cups provide excellent optical clarity for colorimetric-based analyzers that photometrically read the cup contents and have low protein adsorption for routine chemistry analytes. Polypropylene (PP) cups are used when the sample contains organic solvents, strong acids (trace element analysis), or when acid-wash protocols are required for ICP-MS autosampler systems. MoldPro and Globe Scientific PP autosampler cups for PerkinElmer, Agilent, and Shimadzu ICP systems are manufactured from virgin PP with ultra-low metal content verified by ICP-MS lot testing. With or Without Caps/Inserts Sample cups with caps are used when the aliquot must be sealed to prevent evaporation or cross-contamination during batch loading. Insert cups (smaller inner cup that sits inside a standard tube) allow aliquoted samples to be loaded directly without relabeling &mdash; a common efficiency gain in high-volume core labs. Confirm whether your instrument's autosampler accepts capped cups or requires open-top formats. ICP-MS vs. Clinical Chemistry Applications ICP-MS autosampler cups require certified ultra-low metal content (verified by ICP-MS at ppb level), manufactured from virgin PP without metal-containing additives, dyes, or fillers. Standard PS clinical chemistry cups contain low-level metal additives from colorants and should not be used for trace element or heavy metal analysis. Always use metal-free certified cups for any elemental analysis application. 
<h2 dir="ltr"> Specifications Context</h2>
 Globe Scientific analyzer sample cups are manufactured to exact OEM specifications and provide equivalent precision and optical properties to original manufacturer cups. PS cups have optical clarity with &ge;90% light transmission in the visible spectrum, required for photometric analyzers. PP ICP-MS autosampler cups meet ultra-low metal content specifications: typically &lt;1 ppb for Fe, Zn, Cu, Pb, Mn, and other analytes commonly measured in trace element panels. Cup dimensions are held to &plusmn;0.1 mm tolerance on O.D. to ensure consistent seating in autosampler rotors. As of 2026, Globe Scientific is the most widely stocked alternate analyzer consumable brand through lab distributors, including MBP, offering per-cup savings of 20&ndash;40% versus OEM pricing for high-volume clinical labs. 
<a href="https://mbpinc.net/contact-us">Contact MBP&nbsp;</a>for per-cup pricing on case-quantity PO orders.

Automation Sample Cups

110610-Group-Analyzer Consumables Catalog

110610-Group-TDS-110811

110610-Group-TDS-110911

110610-Group-TDS-110621

110610-Group-TDS-110610

110610-Group-TDS-110021

110610-Group-TDS-110711

Multi-Purpose Sample Cups Specifications

1.5mL PS Sample Cup

110610 by Globe Scientific is a 1.5 mL clear polystyrene sample cup measuring 13.8 mm x 22.60 mm, supplied 1,000/bag. Compatible with most popular automated clinical chemistry and immunoassay analyzers. Provides excellent optical clarity for photometric detection. Globe Scientific ISO 9001:2015 certified.

Manufacture

Sample Cup, 1.5mL, PS, 1000/Bag, CS/12000

Sample Cup, 2.0mL, PS, 1000/Bag, CS/10000

Sample Cup, 0.5mL, PS, 1000/Bag, CS/10000

Sample Cup, 0.25mL, PS, 1000/Bag, CS/10000

Sample Cup, 4mL, PS, 1000/Bag, CS/5000

Sample Cup, 3mL, PS, for Hitachi Analyzers, 1000/Bag, CS/6000

Cryo Boxes

<h2>What Are Cryo Boxes?</h2>
&nbsp;
Cryo boxes are lidded, gridded storage containers designed to organize cryogenic vials, microcentrifuge tubes, and centrifuge tubes inside ultra-low temperature (ULT) freezers at &minus;80&deg;C, vapor-phase liquid nitrogen refrigerators (&minus;150 to &minus;190&deg;C), and cryogenic dewars. The two primary materials are water-resistant coated cardboard (economical, single-use) and rigid polycarbonate or polypropylene (reusable, autoclavable, transparent). Standard well configurations&mdash;25 (5&times;5), 81 (9&times;9), and 100 (10&times;10)&mdash;in 2-inch and 3-inch box heights match common cryogenic vial sizes. The alphanumeric grid on the lid helps with sample tracking in LIMS systems. Cardboard cryo boxes are vapor-phase LN2 rated only; polycarbonate is required for autoclave use or liquid-phase LN2 immersion.
&nbsp;
<h2>What you will find:</h2>
&nbsp;
&bull; Standard cryo boxes for cryogenic vial storage &bull; Freezer storage boxes for ultra low temperature use &bull; Cardboard cryo boxes for cost effective storage &bull; Polypropylene cryo boxes for durability and reuse &bull; Grid format boxes for easy sample organization &bull; Hinged lid cryo boxes for quick access &bull; Color coded storage boxes for sample identification &bull; Cryo storage boxes for 1.5 mL and 2.0 mL vials
&nbsp;
<h2>How to Choose Cryo Boxes</h2>
&nbsp;
Material: Cardboard vs. Polycarbonate vs. Polypropylene
Cardboard cryo boxes are economical and used for long-term storage at &minus;80&deg;C or vapor-phase LN2. They are single-use and not autoclavable. Polycarbonate (PC) boxes are durable, transparent, and autoclavable at 121&deg;C, making them suitable for frequent handling. Polypropylene (PP) boxes also tolerate autoclaving and offer higher chemical resistance than PC. Choice depends on reuse frequency and sterilization needs.
Well Count and Vial Size
81-well (9&times;9) boxes fit standard 1.8&ndash;2.0 mL cryogenic vials up to ~13 mm outer diameter. 100-well (10&times;10) boxes are used for smaller 1.2&ndash;1.5 mL vials and microcentrifuge tubes up to ~12 mm OD. Always match vial diameter with box well size before ordering.
Box Height: 2-Inch vs. 3-Inch
2-inch boxes are standard for 1&ndash;2 mL cryovials and are most commonly used in biobanking. 3-inch boxes are for larger 3&ndash;5 mL vials and certain centrifuge tubes where extra depth is required.
LN2 Phase Compatibility
Both cardboard and hard-wall boxes can be used in vapor-phase LN2. Only polycarbonate or polypropylene boxes should be used for liquid-phase LN2 because cardboard can break down when submerged.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Cryo boxes are typically rated from &minus;196&deg;C to +121&deg;C depending on material. Cardboard is suitable for vapor-phase LN2 only, while hard-wall plastic boxes can handle more demanding workflows. Proper selection depends on vial size, storage temperature, and how frequently samples are accessed.
Eliminate the risk of thermal damage. <a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;">Connect with the experts at Molecular Biology Products Inc.</a> to find the perfect storage solution for your high-value specimens.

3050-Group-Cryogenic Vial Brochure

100 Place BioBox for Internal Thread Only 1 & 2mL Cryogenic Vials

Globe Scientific BioBOX 100 (SKU 3050) — 100-place (10×10) polycarbonate cryogenic storage box for internal thread 1.0 mL and 2.0 mL CryoCLEAR vials only. Rated -196°C to +121°C. Printed numerical grid lid, vent holes, frosted writing surface, and CryoCLEAR vial picker included. Available in blue, green, red, yellow, and white; sold in packs of 5.

BioBOX 100, for 1.0mL and 2.0mL Internal Threaded CryoCLEAR vials, Polycarbonate (PC), Holds 100 vials (10x10 format), Printed Lid, Pack Includes a CryoClear Tube Picker, BLUE , CS/40

BioBOX 100, for 1.0mL and 2.0mL Internal Threaded CryoCLEAR vials, Polycarbonate (PC), Holds 100 vials (10x10 format), Printed Lid, Pack Includes a CryoClear Tube Picker, GREEN, CS/40

BioBOX 100, for 1.0mL and 2.0mL Internal Threaded CryoCLEAR vials, Polycarbonate (PC), Holds 100 vials (10x10 format), Printed Lid, Pack Includes a CryoClear Tube Picker, RED, CS/40

BioBOX 100, for 1.0mL and 2.0mL Internal Threaded CryoCLEAR vials, Polycarbonate (PC), Holds 100 vials (10x10 format), Printed Lid, Pack Includes a CryoClear Tube Picker, WHITE, CS/40

BioBOX 100, for 1.0mL and 2.0mL Internal Threaded CryoCLEAR vials, Polycarbonate (PC), Holds 100 vials (10x10 format), Printed Lid, Pack Includes a CryoClear Tube Picker, YELLOW, CS/40

Centrifuge Tubes

<h2>What Are Centrifuge Tubes?</h2>
 Centrifuge tubes are cylindrical laboratory containers with caps that are used to separate, pellet, and store biological or chemical samples through centrifugal force. They are commonly made from polypropylene (PP) or polystyrene (PS) and are available in sizes ranging from small 0.5 mL microtubes to larger 50 mL conical tubes. These tubes are widely used for cell pelleting, protein precipitation, DNA and RNA extraction, tissue homogenate clarification, and long-term sample storage. Depending on the material, they can withstand temperatures from &minus;80 &deg;C to +121 &deg;C.
In short, the best centrifuge tube depends on your centrifuge rotor, required g-force, sample volume, and sterility needs. 
<h2>What You Will Find: </h2>
<ul>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes" title="All Centrifuge Tubes">All Centrifuge Tubes</a>: Comprehensive selection of 15 mL and 50 mL conical tubes with clear graduations for daily lab workflows.</li>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/oak-ridge-style-centrifuge-tubes" title="Oak Ridge Style Centrifuge Tubes">Oak Ridge Style Centrifuge Tubes</a>: High-speed, chemical-resistant tubes designed to withstand extreme RCF without deformation.</li>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/centrifuge-bottles" title="Centrifuge Bottles">Centrifuge Bottles</a>: Heavy-duty, larger-capacity vessels engineered for bulk sample processing and high-velocity runs.</li>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/large-volume-centrifuge-tubes" title="Large Volume Centrifuge Tubes">Large Volume Centrifuge Tubes</a>: Industrial-strength 250 mL and 500 mL tubes optimized for pilot-scale harvesting and bioprocessing.</li>
</ul>
&nbsp;
<h2>How to Choose Centrifuge Tubes</h2>
 Volume and Rotor Compatibility
Select a tube size that matches both your sample volume and centrifuge rotor. Microtubes ranging from 0.5&ndash;2 mL are commonly used in microcentrifuges and can typically handle speeds up to 20,000 &times; g. Midi tubes in the 5&ndash;10 mL range are suitable for intermediate sample volumes, while 15 mL and 50 mL conical tubes are commonly used in clinical, research, and preparative centrifuges.
Material: Polypropylene vs. Polystyrene
Polypropylene (PP) tubes offer excellent chemical resistance and can tolerate temperatures from &minus;80 &deg;C to +121 &deg;C. They are suitable for autoclaving and exposure to many laboratory solvents. Polystyrene (PS) tubes provide superior optical clarity, making it easier to visually inspect samples and liquid levels, but they have lower resistance to solvents and extreme temperatures.
Sterility and Contamination Control
Sterile centrifuge tubes are typically gamma- or E-beam-irradiated and certified free of RNase, DNase, and pyrogens. These tubes are recommended for RNA extraction, cell culture, and clinical applications where contamination must be minimized. Non-sterile tubes may still be RNase- and DNase-free and are often suitable for routine DNA work and general sample storage.
Cap Design
Attached screw caps help prevent cap mix-ups and sample contamination, especially in high-throughput laboratories. Separate caps can be quicker to open and may be preferred in workflows that require frequent access to samples. If tubes will be used with automated systems, cap dimensions should be verified for compatibility with liquid handling equipment.
Packaging Options
Racked tubes provide convenient organization and allow direct pipetting while the tubes remain in the rack. Bulk-bagged tubes offer a more economical option for laboratories that process large volumes of samples and already have tube storage systems in place.
<h2> Comparing Common Centrifuge Tube Types</h2>
 Microtubes (0.5&ndash;2 mL) are ideal for PCR preparation, microcentrifuge applications, and storage of small sample volumes. They can generally withstand centrifugal forces up to 20,000 &times; g.
Midi tubes (5&ndash;10 mL) are designed for intermediate sample volumes such as culture supernatants and can typically tolerate forces up to 16,000 &times; g.
Sterile 15 mL conical tubes are frequently used for cell pelleting, RNA extraction, and clinical sample processing, with typical ratings between 12,000 and 15,000 &times; g.
Sterile 50 mL conical tubes are commonly selected for larger-volume applications including tissue culture work, density gradient preparation, and large-scale sample processing.
Polystyrene conical tubes in 15 mL and 50 mL formats are often chosen when visual sample inspection is important and solvent exposure is minimal.
<h2> Specifications and Features</h2>
 Polypropylene centrifuge tubes from Globe Scientific and Nest Scientific are manufactured from USP Class VI virgin resin and do not contain plasticizers or processing additives. Sterile products are typically irradiated to achieve a sterility assurance level (SAL) of 10⁻⁶. Most 15 mL tubes feature graduation marks at 1 mL intervals, while 50 mL tubes are usually graduated every 5 mL. MBP offers both bagged and racked centrifuge tube formats, including 15 mL and 50 mL conical tubes as well as smaller microtube and midi tube options.
MBP supports procurement departments by accepting purchase orders and offering institutional pricing for qualified high-volume customers. <a href="https://mbpinc.net/contact-us">Contact the MBP team today</a> for a customized quote.

<h2 data-section-id="155qizo" data-start="0" data-end="33">What Are All Centrifuge Tubes?</h2>
&nbsp;
The All Centrifuge Tubes collection includes the complete range of tube sizes commonly used in research, clinical, and laboratory environments. These tubes range from small 0.5 mL and 1.5&ndash;2 mL microtubes used in microcentrifuge applications to 5 mL and 10 mL midi tubes for intermediate sample volumes, as well as 15 mL and 50 mL conical tubes designed for cell culture, density gradient preparation, and larger-volume sample processing. They are available in polypropylene (PP) for enhanced chemical resistance and temperature tolerance or polystyrene (PS) for improved optical clarity.
&nbsp;
What you will find:
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/microcentrifuge-tubes" title="Microcentrifuge Tubes">Microcentrifuge Tubes</a> &ndash; Precision-engineered for small-volume sample preparation.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/screw-cap-tubes" title="Screw Cap Tubes">Screw Cap Tubes</a> &ndash; Secure, leak-proof closures for long-term storage and transport.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/15ml-and-50ml-centrifuge-tubes" title="15ml &amp; 50ml Centrifuge Tubes">15ml &amp; 50ml Centrifuge Tubes</a> &ndash; Standard conical bottom tubes for large-volume processing.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/midicentrifuge-tubes-5ml-and-10ml" title="Midicentrifuge Tubes (5ml &amp; 10ml)">Midicentrifuge Tubes (5ml &amp; 10ml)</a> &ndash; The perfect bridge for intermediate sample sizes.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/microtubes-box" title="Microtubes Box">Microtubes Box</a> &ndash; Durable storage racks for organized sample management and protection.
</li>
</ul>
&nbsp;
<h2 data-section-id="1f93yys" data-start="914" data-end="963">How to Choose From All Centrifuge Tube Formats</h2>
&nbsp;
Volume and Rotor Compatibility
Selecting the correct tube size is essential for safe and efficient centrifugation. Microtubes ranging from 0.5&ndash;2 mL are designed for microcentrifuges, while 5&ndash;10 mL midi tubes fit compatible benchtop centrifuge rotors. Larger 15 mL and 50 mL conical tubes are commonly used in clinical and research centrifuges. Always verify rotor compatibility before introducing a new tube format into your workflow.
Sterility Requirements
For sensitive applications such as RNA extraction, cell culture, and clinical diagnostics, sterile tubes certified free of RNase, DNase, and pyrogens are recommended. Non-sterile tubes can provide a cost-effective solution for routine DNA analysis, protein assays, and general sample storage where sterility is not critical.
Material Selection
Polypropylene tubes offer excellent durability, can be autoclaved at 121 &deg;C, and resist many laboratory chemicals and solvents. Polystyrene tubes provide superior transparency, making it easier to monitor liquid levels and sample contents, although they are less resistant to heat and solvents.
Packaging and Inventory Planning
Microtubes are commonly available in pack sizes ranging from 500 to 1,000 units, while 15 mL and 50 mL conical tubes are often supplied in cases of 500. Laboratories with consistent usage may benefit from establishing recurring purchase orders to ensure uninterrupted supply.
&nbsp;
<h2 data-section-id="urfo3f" data-start="2395" data-end="2433">Compare Centrifuge Tube Size Groups</h2>
&nbsp;
Microtubes (0.5&ndash;2 mL) are primarily used for PCR preparation, microcentrifuge applications, and storage of small sample volumes. These are typically manufactured from polypropylene and are available in pack sizes of 500&ndash;1,000 units.
Midi tubes (5&ndash;10 mL) support intermediate-volume centrifugation and supernatant collection. They are commonly made from polypropylene and supplied in packs ranging from 100&ndash;500 units.
15 mL conical tubes are widely used for cell pelleting, RNA isolation, and clinical sample processing. They are available in both polypropylene and polystyrene formats and are generally packaged in cases of 500.
50 mL conical tubes are designed for larger-volume workflows, including tissue culture, density gradient preparation, and sample processing. Like 15 mL tubes, they are available in polypropylene and polystyrene and are commonly sold in cases of 500.
&nbsp;
<h2 data-section-id="1ezckh3" data-start="3318" data-end="3348">Specifications and Features</h2>
&nbsp;
Globe Scientific and Nest Scientific centrifuge tubes are manufactured from USP Class VI virgin polypropylene or polystyrene resin and are certified free from detectable RNase, DNase, and pyrogens. Sterile products are irradiated using gamma or E-beam methods to achieve a sterility assurance level (SAL) of 10⁻⁶. MBP offers both racked and bagged formats for 15 mL and 50 mL conical tubes, along with dispenser-box options for selected microtube product lines that support efficient use in high-throughput laboratory environments.
For procurement teams, MBP accepts purchase orders and offers institutional pricing for bulk and high-volume purchases. <a href="https://mbpinc.net/contact-ushttps://mbpinc.net/contact-us" title="Contact the MBP team" style="color: #236fa1;">Contact the MBP team</a> today to learn more

All Centrifuge Tubes

<h2 data-section-id="1k6o3gy" data-start="0" data-end="50">What Are Midicentrifuge Tubes (5 mL and 10 mL)?</h2>
&nbsp;
Midicentrifuge tubes are polypropylene conical tubes available in 5 mL and 10 mL capacities, designed for laboratory workflows that require sample volumes larger than standard microtubes but smaller than traditional 15 mL conical tubes. These tubes provide an efficient solution for intermediate-volume applications and are commonly used in cell culture, protein purification, gradient fraction collection, virus concentration, and clinical specimen processing.
By filling the gap between 2 mL microcentrifuge tubes and 15 mL conical tubes, midi tubes help optimize sample handling and centrifugation efficiency while reducing unnecessary tube volume and excess headspace.
Midicentrifuge tubes are ideal for sample volumes between approximately 2 mL and 12 mL, especially when a 15 mL conical tube is too large for the application or incompatible with the available rotor setup.
&nbsp;
<h2 dir="ltr">What you will find in this section:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">Sterility options: Sterile (for sensitive work) &amp; Non-sterile (for routine use)</li>
</ul>
<ul>
<li dir="ltr" aria-level="1">
Bag packed: Economical, space-saving
</li>
<li dir="ltr" aria-level="1">
Racked: Organized, ready-to-use
</li>
</ul>
<ul>
<li dir="ltr" aria-level="1">
Attached screw cap: No mix-ups, convenient
</li>
<li dir="ltr" aria-level="1">
Assembled screw cap: Pre-fitted, time-saving
</li>
<li dir="ltr" aria-level="1">
Separate screw cap: Flexible handling for workflows
</li>
</ul>
&nbsp;
<h2 data-section-id="1vogm0p" data-start="945" data-end="982">How to Choose Midicentrifuge Tubes</h2>
&nbsp;
Selecting the Appropriate Volume
The choice between 5 mL and 10 mL tubes depends on the volume of your samples and workflow requirements.
5 mL midi tubes are well suited for applications involving smaller sample volumes, typically below 4.5 mL. They minimize excess headspace and can improve pellet formation during lower-speed centrifugation procedures.
10 mL midi tubes are commonly used for larger intermediate-volume applications, including culture supernatant collection, protein purification workflows, and virus concentration protocols requiring volumes between 6 mL and 10 mL.
Rotor Compatibility
Before purchasing midi tubes, verify that your centrifuge rotor or adapter system is designed to accommodate 5 mL or 10 mL formats. While many benchtop centrifuges support these tubes through dedicated adapters, compatibility varies by manufacturer and rotor model.
The standard dimensions of Globe Scientific 10 mL centrifuge tubes are compatible with many commonly used conical tube adapters found in research and clinical laboratories.
Sterility and Cap Design
Sterile midi tubes with attached screw caps are recommended for cell culture, clinical specimens, and applications where contamination control is essential. Attached caps also reduce the risk of sample mix-ups and accidental contamination.
Non-sterile tubes with separate caps may offer a more economical option for routine laboratory procedures where sterility is not required.
Packaging Considerations
Most midi tubes are supplied in bagged packaging rather than racks. A common configuration includes 100 tubes per bag, making them suitable for laboratories that process moderate to high sample volumes. Reviewing expected usage rates can help determine appropriate ordering quantities and inventory levels.
&nbsp;
<h2 data-section-id="um8esp" data-start="2800" data-end="2829">Compare Midi Tube Variants</h2>
&nbsp;
10 mL Polypropylene Midi Tubes with Attached Screw Caps These sterile tubes are commonly used for clinical specimens, cell culture supernatants, and protein purification workflows. The attached cap design enhances sample security and handling convenience.
5 mL Polypropylene Midi Tubes with Attached Caps Available in sterile and non-sterile formats, these tubes are suitable for gradient fraction collection, low-volume sample preparation, and intermediate-volume centrifugation procedures.
Non-Sterile Midi Tubes with Separate Caps Designed for routine laboratory applications where contamination control is less critical, these tubes provide a cost-effective option for general-purpose centrifugation workflows.
&nbsp;
<h2 data-section-id="1ezckh3" data-start="3567" data-end="3597">Specifications and Features</h2>
&nbsp;
Globe Scientific midicentrifuge tubes are manufactured from high-quality polypropylene and are certified RNase-free and DNase-free. The conical-bottom design promotes efficient sample recovery and pellet formation, while the polypropylene construction provides excellent chemical resistance and temperature stability from &minus;80 &deg;C to +121 &deg;C.
Sterile 10 mL Globe Scientific tubes are supplied with attached screw caps and are commonly packaged with 100 tubes per bag. Globe Scientific operates under ISO 9001:2015 quality standards to ensure consistent manufacturing and product performance.
MBP carries Globe Scientific 10 mL midicentrifuge tubes and may offer additional 5 mL options depending on current inventory availability.
Have questions about the best fit for your workflow?&nbsp;<a href="https://mbpinc.net/contact-us">Contact the Molecular Biology Products Inc. team </a>for a quick quote.

Midicentrifuge Tubes (5ml & 10ml)

Product Literature

DataSheet - 6292/6293

10mL Screwcap Centrifuge Tubes

6292/6293 by Globe Scientific are 10 mL polypropylene screwcap centrifuge tubes (16 × 100 mm) rated to 3,000 × g, with white printed graduations and a large white writing area. SKU 6292 is non-sterile with a separate natural cap; SKU 6293 is gamma-irradiation sterilized with an attached yellow cap. Both are confirmed compatible with standard 15 mL rotor positions, and SKU 6292 fits the bioMerieux® PREVI™ Isola automated plate streaker system.

Centrifuge Tube, 10mL, with Separate Natural PP Screw Cap, PP, Printed Graduations, Tubes packed 100/Bag, 10 Bags/Unit & Caps packed 500/Bag, 2 Bags/Unit, CS/1000

Centrifuge Tube, 10mL, with Attached Yellow PP Screw Cap, PP, Printed Graduations, STERILE, 100/Bag, 10 Bags/Unit, CS/1000

Transport Tubes

<h2 dir="ltr">What are Transport Tubes?</h2>
 Transport tubes are sterile, leak-proof screw-cap tubes used for collecting, transporting, and temporarily storing biological specimens from the collection site to the testing laboratory. They span a broad category: empty specimen containers (15 mL and 50 mL self-standing conical tubes), pre-filled saline transport tubes, UTM (Universal Transport Medium) tubes, and specialty specimen vials. All transport tubes share three required attributes&mdash;leak-proof construction, sterility confirmation, and compatibility with the downstream assay's matrix requirements. Choose the transport tube type based on the specimen, the target analyte, and the assay platform it will be processed on. 
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">5 mL transport tubes for routine sample movement</li>
<li dir="ltr" role="presentation">10 mL tubes for higher volume biological samples</li>
<li dir="ltr" role="presentation">Leak-tight screw-cap tubes for secure handling</li>
<li dir="ltr" role="presentation">Sterile transport tubes for clinical workflows</li>
<li dir="ltr" role="presentation">Graduated tubes with labeling surfaces for tracking</li>
<li dir="ltr" role="presentation">Self-standing tubes for easier bench organization</li>
</ul>
&nbsp;
<h2 dir="ltr">How to Choose Transport Tubes</h2>
 Material: Polypropylene (PP) vs. Polystyrene (PS) PP conical transport tubes are chemical-resistant, autoclavable, and certified DNase/RNase-free in molecular-grade formats. PS transport tubes (30 mL translucent format, Globe Scientific) are lighter and less expensive but not autoclavable. For nucleic acid work, DNA/RNA-free certified PP is the standard. For specimen transport requiring centrifugation, PP is preferred due to higher g-force tolerance (PP rated to &ge;10,000 &times; g in most formats). Self-Standing vs. Rack Format Self-standing (skirted-base) conical tubes stand upright without a rack, reducing knock-over risk during aliquoting and transport. Rack-based tubes require a separate holder. Globe Scientific self-standing 50 mL PP transport tubes feature a printed graduation, white frosted writing area, and are available sterile, non-sterile, or metal-free. Sterile tubes are RNase/DNase-free and pyrogen-free per the lot certificate. Sterile vs. Non-Sterile Sterile tubes (ISO 11137 radiation sterilization, SAL 10⁻⁶) are required for culture, NAAT, and any specimen where contamination would invalidate the result. Non-sterile metal-free PP tubes are suited to trace-element analysis and environmental sampling where sterility is not required but metal contamination would interfere. Volume 15 mL tubes are standard for most clinical specimen aliquots, urine transfers, and culture setups. 50 mL tubes are used for higher-volume specimens (24-hour urine aliquots, stool homogenates, bulk transport of tissue homogenates). Globe Scientific 30 mL tubes with integral spoon are designed specifically for fecal specimen self-collection. Media and Additives Empty transport tubes (no fill) are the base format; select a pre-filled tube (saline, UTM, boric acid) based on the specimen type and analyte stability requirements. For nucleic acid targets, pre-filled tubes with DNA/RNA Shield, UTM, or saline are the appropriate formats. 
<h2 dir="ltr"> Specifications Context</h2>
 Globe Scientific self-standing 50 mL conical transport tubes are manufactured from USP Class VI medical-grade PP with a conical bottom skirt for freestanding stability. Printed graduation marks (1 mL intervals) and a frosted writing area are standard features. Sterile versions are individually wrapped and certified RNase-free, DNase-free, and pyrogen-free per lot certificate, consistent with ISO 9001:2015 manufacturing standards. Non-sterile metal-free versions are supplied with a separate natural screw cap and are tested for trace metals via ICP-MS before lot release. MBP's transport tubes catalog includes Globe Scientific and NEST Scientific formats in multiple pack sizes (25/bag and bulk packs of 500). 
&nbsp;
If you need help choosing tube size or matching the right transport format to your workflow,<a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;"> the MBP team</a> can help you sort it out without overthinking it.

Transport Tube Products

Tubes, Caps & Racks Catalog

Lab Supplies for Physicians Offices

TDS - 6101 Series

TDS - 6102 Series

10mL Self-Standing Transport Tubes

6101 by Globe Scientific — 5 mL clear polypropylene self-standing transport tube with separate white PE screw cap. Non-sterile, autoclavable, molded graduations, 16 &times; 56 mm, 1000/cs. For specimen transport and sample storage.

Transport Tube, 5mL, with Separate White Screw Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 5mL, with Separate Screw Cap, AMBER, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 5mL, with Separate Blue Screw Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 5mL, with Separate Green Screw Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 5mL, with Separate Red Screw Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 5mL, with Separate Yellow Screw Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 5mL, with Attached White Screw Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 5mL, with Attached White Screw Cap, STERILE, PP, Conical Bottom, Self-Standing, Molded Graduations, 25/Bag, CS/500

Transport Tube, 5mL, No Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

6102 by Globe Scientific is a 10mL polypropylene self-standing transport tube with a separate white screw cap, conical bottom, and molded graduations — non-sterile, 1,000 per case. Freeze-resistant polypropylene construction and a self-standing base make these tubes suitable for specimen transport, aliquoting, and sample banking in clinical and research laboratories.

Transport Tube, 10mL, with Separate White Screw Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 10mL, with Separate Blue Screw Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 10mL, with Separate Green Screw Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 10mL, with Separate Red Screw Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 10mL, with Separate Yellow Screw Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 10mL, with Separate Screw Cap, AMBER, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 10mL, with Attached White Screw Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Transport Tube, 10mL, with Attached White Screw Cap, STERILE, PP, Round Bottom, Self-Standing, 25/Bag, 20 Bags/Case, CS/500

Transport Tube, 10mL, with Separate Red Screw Cap with Hole for Swab, STERILE, PP, Round Bottom, Self-Standing, Bulk Packed, 2 x 500 Tubes/Bag & 1 x 1000 Caps/Bag (1000 pcs), CS/1000

Transport Tube, 10mL, No Cap, PP, Conical Bottom, Self-Standing, Molded Graduations, CS/1000

Test Tubes

<h2 dir="ltr">What are Test Tubes?</h2>
 Test tubes for laboratory use are open-ended, cylindrical glass or plastic tubes used to hold, mix, incubate, and heat liquid and solid samples across a broad range of applications: bacteriological culture, tissue culture, clinical chemistry, serological assays, immunology, and general sample processing. Choose borosilicate glass for reusable, high-temperature, or chemically demanding applications; choose polystyrene disposable 12&times;75 mm tubes for flow cytometry and colorimetric assays; choose polypropylene capped tubes for microbial culture with anaerobic or gas-generating organisms.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">Glass test tubes in diverse formats for heating and chemical reaction workflows</li>
<li dir="ltr" aria-level="1">
Plastic polypropylene test tubes for routine laboratory use
</li>
<li dir="ltr" aria-level="1">
Graduated tubes for quick and easy volume estimation
</li>
<li dir="ltr" aria-level="1">
Conical and round-bottom tube formats for different applications
</li>
<li dir="ltr" aria-level="1">
Sterile disposable test tubes for clinical and diagnostic work
</li>
<li dir="ltr" aria-level="1">
Heat-resistant tubes for incubation and controlled heating steps
</li>
</ul>
&nbsp;
<h2 dir="ltr">How to Choose Test Tubes</h2>
 Material: Glass vs. Polypropylene vs. Polystyrene Borosilicate glass 3.3 (ASTM E438 Type I, Class B) test tubes withstand direct flame, autoclave sterilization at 121 &deg;C, and most solvents, acids, and bases. They are reusable and autoclavable, making them cost-effective over high-volume laboratory runs. Polystyrene (PS) disposable tubes offer outstanding optical clarity for flow cytometry (FACS), cell counting, and OD-based colorimetric assays, but cannot be autoclaved and should not be used with aromatic solvents or strong acids. Polypropylene (PP) tubes are chemically resistant, autoclavable, and available with screw caps for anaerobic culture or gas-generating reactions. Rimmed vs. Rimless Rimless test tubes (fire-polished ends) allow easier insertion of rubber or silicone stoppers and are preferred for plugging with cotton wool for microbial culture. Rimmed tubes have a flared lip that facilitates pouring and is compatible with spring-metal tube closures. Confirm your closure type before ordering in bulk. Size and Volume The most common test tube dimensions in clinical and research labs: 12&times;75 mm: ~5 mL capacity; standard for flow cytometry, FACS, serology 13&times;100 mm: ~10 mL; general culture and chemistry 16&times;100 mm: ~14 mL; culture and chemistry 16&times;125 mm: ~17 mL; microbiological culture 18&times;150 mm: ~25 mL; larger-volume digests and culture Wall thickness of 1.2 mm (light wall, borosilicate 3.3) is the standard for general lab use; heavy-wall versions are used for digestions and applications involving vacuum or pressure. Sterile vs. Non-Sterile Sterile borosilicate glass culture tubes (individually wrapped or bulk-sterilized) are required for microbial culture, cell culture, and any application where contamination would invalidate the result. Non-sterile tubes are adequate for chemistry, spectroscopy, and other abiotic applications. Disposable PS tubes from Corning (PYREX&trade;) and Globe Scientific are supplied sterile or non-sterile; confirm the specification on the lot certificate. 
<h2 dir="ltr"> Specifications Context</h2>
 Borosilicate glass 3.3 test tubes have a linear thermal expansion coefficient of 3.3 &times; 10⁻⁶ K⁻&sup1;, providing resistance to thermal shock from room temperature to 300 &deg;C (direct flame) and from 0 to 121 &deg;C (autoclave cycles). Light-wall tubes (1.2 mm uniform wall thickness) provide the standard for general laboratory use; heavy-wall variants (2.0 mm) are used for digestion vessels and pressurized applications. Corning PYREX&trade; disposable round-bottom rimless glass tubes for tissue culture conform to ASTM standards and are the reference format for bacteriological serology and cell wash procedures. MBP supplies Globe Scientific and NEST Scientific test tube lines for research and clinical labs across the USA, Canada, and worldwide. &nbsp; 
If you&rsquo;re choosing between glass and plastic or trying to match the right size to your workflow, it&rsquo;s worth getting that part right early &mdash; it makes everything downstream smoother and a lot less messy. <a href="https://mbpinc.net/contact-us">Contact the MBP team now!</a>

110415-Group-Tubes, Caps & Racks Catalog

110415-Group-TDS-110415-110445

13x100mm Plastic Test Tubes

110415 by Globe Scientific are 13 × 100&#160;mm, 8&#160;mL polystyrene culture tubes rated to 1,500&#160;RPM, sold in cases of 1,000. Also available in polypropylene (110445, 3,000&#160;RPM, autoclavable, freezable) for higher-force and sterilization applications. Both formats accept dual-position snap caps for aerobic or anaerobic storage.

Test Tube, 13 x 100mm (8mL), PS, 1000/Bag, CS/1000

Test Tube, 13 x 100mm (7mL), PS, Bulk, 3000/Case, CS/3000

Test Tube, 13 x 100mm (8mL), PP, CS/1000

Test Tube, 13 x 100mm (7mL), PP, Bulk, 3000/Case, CS/3000

15ml & 50ml Centrifuge Tubes

6268-Group-Tubes, Caps & Racks Catalog

15 Centrifuge Tubes with Red Caps

Globe Scientific 6268 is a 15 mL polystyrene centrifuge tube with a separate red HDPE screw cap, rated to 1,700 × g. Dimensions 17 × 100 mm, printed graduations, large writing area, non-sterile, 500 per case — for low-speed pelleting of cells and precipitates.

Centrifuge Tube, 15mL, Separate Red Screw Cap, PS, Printed Graduations, CS/500

Centrifuge Tube, 15mL, Attached Red Screw Cap, PP, Printed Graduations, STERILE, 25/Bag, 20 Bags/Unit, CS/500

Centrifuge Tube, 15mL, with Separate Red Screw Cap, PP, Printed Graduations, CS/500

Centrifuge Tube, 15mL, Attached Red Screw Cap, PP, Printed Graduations, STERILE, 50/Rack, 10 Racks/Unit, CS/500

Centrifuge Tube, 15mL, Attached Red Screw Cap, PS, Printed Graduations, STERILE, 25/Bag, 20 Bags/Unit, CS/500

Centrifuge Tube, 15mL, Attached Red Screw Cap, PS, Printed Graduations, STERILE, 50/Rack, 10 Racks/Unit, CS/500

DataSheet - 6285/6286/6284

DataSheet - 6288/6289/6287

15mL & 50mL General Purpose Screwcap Centrifuge Tubes

6284 by Globe Scientific is a 15 mL non-sterile polypropylene centrifuge tube with a separate blue flat-top screw cap, 0.5 mL printed graduations, and an 8,500 RCF maximum spin rating. Autoclavable at 121°C, serviceable from −20°C to +121°C, sold 500 per case. Sterile and 50 mL variants available within the same family (6285–6289). Order from MBP, a registered vendor to Howard Hughes Medical Institute, Vanderbilt University, MD Anderson Cancer Center, Eurofins, and many other institutes across the USA.

Centrifuge Tube, 15mL, Separate Blue Flat Top Screw Cap, PP, Printed Graduations, Bulk, CS/500

Centrifuge Tube, 15mL, Attached Blue Flat Top Screw Cap, PP, Printed Graduations, STERILE, 25/Bag, 20 Bags/Unit, CS/500

Centrifuge Tube, 15mL, Attached Blue Flat Top Screw Cap, PP, Printed Graduations, STERILE, 50/Rack, 10 Racks/Unit, CS/500

Centrifuge Tube, 50mL, Separate Blue Flat Top Screw Cap, PP, Printed Graduations, Bulk, CS/500

Centrifuge Tube, 50mL, Attached Blue Flat Top Screw Cap, PP, Printed Graduations, STERILE, 25/Bag, 20 Bags/Unit, CS/500

Centrifuge Tube, 50mL, Attached Blue Flat Top Screw Cap, PP, Printed Graduations, STERILE, 25/Rack, 20 Racks/Unit, CS/500

111010-Group-Tubes, Caps & Racks Catalog

111010-Group-TDS-111041

16x100 Plastic Test Tubes

111010 by Globe Scientific is a 16 x 100mm, 12 mL polystyrene test tube with rim and round bottom, graduated at 2.5, 5, and 10 mL, rated to 1,500 RPM. Supplied 500/bag, 4 bags/case (2,000/case). For applications above 1,500 RPM or requiring autoclave compatibility, Globe Scientific offers PP variants (SKU 111040/111041) rated to 3,000 RPM.

Test Tube, 16 x 100mm (12mL), PS, with Rim, Graduated at 2.5, 5 & 10mL, 500/Bag, 4 Bags/Unit, CS/2000

Test Tube, 16 x 100mm (12mL), PS, No Rim, 500/Bag, 4 Bags/Unit, CS/2000

Test Tube, 16 x 100mm (12mL), PP, with Rim, Graduated at 2.5, 5 & 10mL, CS/2000

Test Tube, 16 x 100mm (12mL), PP, No Rim, Bulk, CS/2000

Test Tube, 16 x 100mm (12mL), PP, No Rim, 500/Bag, 4 Bags/Unit, CS/2000

Test Tube, 16 x 100mm (12mL), PS, No Rim, 500/Bag, 2 Bags/Unit, CS/1000

Test Tube, 16 x 100mm (12mL), PP, No Rim, Graduated, Bulk, CS/2000

110110-Tubes, Caps & Racks Catalog

16x150mm Plastic Tubes

110110 by Globe Scientific is a 25 mL polystyrene test tube measuring 16 &times; 150 mm, rimless and round-bottomed, supplied in cases of 1,000. Optical-clarity PS construction allows direct visual inspection of turbidity and pellet formation; rated to 1,500 RPM centrifugation. Suited for bacterial culture, serial dilutions, enzyme reactions, and sample staging where a larger-diameter tube than 12 mm is needed. Not autoclavable &mdash; a PP version is available for autoclaving and higher-speed spins.

Test Tube, 16 x 150mm (20mL), PS, CS/1000

Test Tube, 16 x 150mm (20mL), PP, CS/850

Sample Storage Container

<h2 dir="ltr">What are Urine Collection Products?</h2>
 Urine collection products for laboratory use are containers and preservative systems designed to collect, stabilize, and transport urine specimens for urinalysis (UA), urine culture (C&amp;S), nucleic acid-based testing (NAAT for STIs), cell-free DNA (cfDNA) liquid biopsy, and 24-hour timed collections. Formats include sterile cups (30&ndash;60 mL), preservative tubes (5&ndash;50 mL), vacuum-draw urine transfer tubes, 24-hour collection containers (2&ndash;3 L), and preservative-prefilled devices for ambient-temperature stabilization of DNA, RNA, and proteins. Choose urine collection products with an active preservative when specimens cannot be processed within 2 hours of collection, when samples must be shipped to a centralized lab, or when nucleic acid integrity over 24+ hours is required.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Sterile urine collection containers for routine diagnostic sampling</li>
<li dir="ltr" role="presentation">Urine transport tubes for secure handling and transfer workflows</li>
<li dir="ltr" role="presentation">Preservative urine tubes for culture and urinalysis stability</li>
<li dir="ltr" role="presentation">Midstream urine collection systems for contamination reduction</li>
<li dir="ltr" role="presentation">24-hour urine collection containers for metabolic testing workflows</li>
<li dir="ltr" role="presentation">Leak-resistant screw-cap urine tubes for safe transport</li>
<li dir="ltr" role="presentation">Graduated urine containers with volume markings for easy measurement</li>
<li dir="ltr" role="presentation">Pediatric urine collection solutions for low-volume sampling</li>
<li dir="ltr" role="presentation">Closed-system urine transfer devices for reduced exposure handling</li>
<li dir="ltr" role="presentation">General laboratory urine collection consumables for research use</li>
</ul>
<h2 dir="ltr"> How to Choose Urine Collection Products</h2>
 Application: Culture vs. NAAT vs. Nucleic Acid Research For culture (C&amp;S), use sterile cups or boric acid preservative tubes. For NAAT (STI panels for Chlamydia, Gonorrhea), use sterile cups or manufacturer-validated transfer tubes; confirm with your platform's IFU (e.g., Hologic Aptima Combo 2 uses a specific urine transport tube). For nucleic acid research (cfDNA, RNA, protein), use dedicated urine preservative tubes (Norgen, Streck) that stabilize analytes for up to 72 hours at room temperature. Volume: Random vs. 24-Hour Collection Random midstream urine (10&ndash;30 mL) is adequate for urinalysis, culture, and NAAT. Timed 24-hour collections (total volume 500&ndash;3000 mL) require large-volume containers with the appropriate preservative for the ordered panel. Mixing 24-hour containers with different preservatives is a common error&mdash;verify the correct preservative type with the laboratory before dispensing to the patient. Preservative Compatibility Boric acid tubes maintain bacterial counts for culture up to 24 hours at room temperature. Boric acid is NOT compatible with NAAT workflows&mdash;it inhibits PCR. For NAAT, use plain sterile containers or manufacturer-specific transfer tubes. For liquid biopsy cfDNA, Streck Cell-Free DNA Urine Preservative maintains cell integrity and prevents genomic DNA contamination for up to 72 hours. Sterility All urine containers intended for culture must be certified sterile. Containers for NAAT must be certified DNase-free and RNase-free to prevent nucleic acid contamination from the container. Confirm sterility and nuclease-free certification in the manufacturer's datasheet before use in molecular workflows. Automated Compatibility For high-throughput labs using automated urine analyzers (Sysmex UF-5000, Siemens CLINITEK), confirm that the collection tube format and cap design are compatible with tube-handling robotics. Copan UriSponge&reg; (FDA-cleared October 2024) is a boric-acid-free device validated for direct loading on WASP&reg; automation systems. 
&nbsp;
<h2 dir="ltr">Specifications Context</h2>
 Standard urine collection cups are manufactured from transparent polypropylene (PP) or polystyrene (PS) with wide-mouth, screw-cap lids. Sterile cups rated for culture meet ISO 7886 and are non-pyrogenic. Boric acid preservative tubes contain approximately 1.8% boric acid, stabilizing bacterial counts by creating a bacteriostatic environment. Norgen urine preservative tubes (5&ndash;50 mL, available in multiple sizes) stabilize DNA, RNA, microRNA, and protein from fresh urine for over 2 years at room temperature per manufacturer validation data. As of 2026, liquid biopsy studies using urine cfDNA routinely use Streck Cell-Free DNA Urine Preservative (3 mL per 30 mL urine) as the standard stabilization protocol in published clinical research protocols. 
Need help picking the right urine collection setup? <a href="https://mbpinc.net/contact-us">Contact MBP</a>, and we&rsquo;ll help you sort it out fast. No confusion, just the right fit for your workflow.

Urine Collection Products

Flyer

24 Hour Urine Collection Container

Globe Scientific 108010 — 3,000 mL amber polyethylene 24-hour urine collection container with affixed TransferTop™ screwcap for closed-system vacuum tube transfer. Molded graduated markings, ergonomic handles, and light-protective amber color for sensitive analytes. Pack of 30.

Container, 24 Hour Urine Collection, 3000mL (3 Liter), Affixed TransferTop Screwcap, Amber, CS/30

Container, 24 Hour Urine Collection, 2000mL (2 Liter), Affixed Screwcap, Amber, CS/54

Container, 24 Hour Urine Collection, 2500mL (2.5 Liter), Affixed Screwcap, Amber, CS/30

Container, 24 Hour Urine Collection, 3000mL (3 Liter), Affixed Screwcap, Amber, CS/30

Container, 24 Hour Urine Collection, 3 Liter, Red with Screwcap and Snap Pour Spout, CS/40

109217-Group-Tubes, Caps & Racks Catalog

30mL Self-Standing Container with Screw Caps

109217 by Globe Scientific is a 30 mL clear polystyrene universal container with attached HDPE screwcap, conical self-standing base, 30 x 115 mm, rated to 5,000 RPM (6,160 x g). Non-sterile, 500/case. For urine and specimen collection, sample aliquoting, cell pellet collection, and general containment in clinical and research labs.

Container, Universal, 30mL, Attached Screwcap, PS, Conical Bottom, Self-Standing, 100/Bag, 5 Bags/Unit, CS/500

Container, Universal, 30mL, Attached Screwcap, PP, Conical Bottom, Self-Standing, 100/Bag, 5 Bags/Unit, CS/500

United States

Texas

mbpinc