Globe Scientific

Single Channel Pipettors

<h2 dir="ltr">What Are Single-Channel Pipettors?</h2>
 A single-channel pipettor is the single most widely used liquid handling instrument in molecular biology, cell biology, and clinical research. It transfers precise volumes between 0.1 &micro;L and 5,000 &micro;L, one well or tube at a time, using an air-displacement piston mechanism. The piston creates a partial vacuum that aspirates liquid into a disposable tip; advancing the piston fully dispenses the liquid. A spring-loaded tip ejector releases the used tip without hand contact for contamination control. Manual models depend on finger force and offer simple, battery-free operation; electronic models add programmable aspiration/dispensing speeds, multi-dispense modes, and up to 5 custom pipetting programs.&nbsp; A set of four manual single-channel pipettors (P10, P20, P200, P1000) covers 95% of molecular biology liquid handling; add electronic models for high-throughput repetitive work.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Adjustable volume single-channel pipettors for flexible workflows
</li>
<li dir="ltr" aria-level="1">
Fixed volume pipettors for repeatable dispensing tasks
</li>
<li dir="ltr" aria-level="1">
Mechanical pipettors for standard lab use
</li>
<li dir="ltr" aria-level="1">
Ultra-low volume micropipettors for precise &micro;L handling
</li>
<li dir="ltr" aria-level="1">
Wide-range pipettors covering &micro;L to mL volumes
</li>
<li dir="ltr" aria-level="1">
Autoclavable pipettors for sterile environments
</li>
<li dir="ltr" aria-level="1">
Lightweight ergonomic pipettors for long sessions
</li>
</ul>
<h2 dir="ltr"> How to Choose a Single-Channel Pipettor</h2>
 Volume Range: Build a Complete Bench Set A standard four-pipettor bench set covers P10 (1&ndash;10 &micro;L), P20 (2&ndash;20 &micro;L), P200 (20&ndash;200 &micro;L), and P1000 (100&ndash;1,000 &micro;L). For sub-microliter work (sequencing, single-cell), add a P2 (0.2&ndash;2 &micro;L). For large-volume dispensing (media prep, column loading), add a P5000 (1,000&ndash;5,000 &micro;L). Avoid selecting a volume range that places your target dispense below 20% of the maximum &mdash; accuracy degrades at the low end of any range. Manual vs Electronic Manual single-channel pipettors (Eppendorf Research Plus, Gilson PIPETMAN Classic, Rainin Pipet-Lite XLS+) are the standard for routine lab work: field-calibratable, autoclavable, and requiring no power source. Electronic single-channel pipettors (Eppendorf Research Pro, Rainin Pipet-Lite XLS+ Electronic) add: programmable aspiration/dispense speed (5 speeds), multi-dispense (repeat pipetting) mode, mix mode, dilution mode, and backlight LCD volume display. Electronic models reduce hand fatigue in workflows exceeding 200&ndash;300 tip changes per day. Tip Compatibility Three tip systems cover the market: standard conical (universal fit &mdash; fits Eppendorf Research Plus, Gilson PIPETMAN, Rainin non-LTS, Thermo, Sartorius/BioHit); Rainin LTS cylindrical (requires LTS-specific tips &mdash; lower force insertion); Eppendorf epT.I.P.S. proprietary (tightest fit for Eppendorf instruments). Select the tip system that matches your pipettor purchase and existing tip inventory before committing to a brand. Autoclavability and Chemical Resistance Manual pipettors from Eppendorf, Gilson, and Rainin have fully autoclavable lower sections (121&deg;C, 15 psi, 15 min). Electronic pipettors have autoclavable nose cones only &mdash; the electronic module cannot be autoclaved. Calibration and Service All single-channel pipettors are factory-calibrated per ISO 8655. Field recalibration tools are available for Eppendorf, Gilson, and Rainin to perform in-lab gravimetric verification without external service. 
<h2 dir="ltr"> Specifications Context </h2>
 ISO 8655 Part 2 accuracy spec for a 200 &micro;L air-displacement pipettor: &plusmn;0.8 &micro;L systematic error, &le;0.3 &micro;L random error (Eppendorf Research Plus specification at 200 &micro;L). Most manual pipettors weigh 70&ndash;120 g; electronic models weigh 150&ndash;220 g. Operating temperature range: typically 15&ndash;40&deg;C. Eppendorf Research Plus, Gilson PIPETMAN Classic, and Rainin Pipet-Lite XLS+ LTS remain the three dominant single-channel pipettor platforms in North American research labs.&nbsp; 
&nbsp;
Ready to find your new favorite lab tool? Don&rsquo;t just settle for any grip&mdash;find the one that fits your hand and your science. <a href="https://mbpinc.net/contact-us" style="color: #236fa1;">Reach out to the MBP team</a> today for a customized quote.

Pipette, RV-Pette Repeat Volume  (Uses Dispenser Tips # 3900 - # 3908 Listed Below), EA

The RV-Pette Repeat Volume Pipette (Globe Scientific 3250) dispenses 29 discrete volumes from 1 µL to 5,000 µL, completing up to 48 steps per reservoir fill at intervals as fast as 1 second. A click-stop dial and on-body volume chart enable rapid volume selection, while the ergonomic top-mounted plunger reduces hand strain during extended dispensing. Ships with a certificate of calibration and a one-year warranty; compatible with Globe Scientific dispenser tips #3900–#3908.

Manufacture

Pipettors Accessories

<h2 dir="ltr"> What Are Pipettor Accessories?</h2>
 Pipettor accessories are complementary tools and parts that support correct storage, calibration, maintenance, and identification of laboratory pipettors. Pipettors stored lying flat on a benchtop risk contaminating the nose cone and suffer tip ejector wear; vertical stand storage is the manufacturer-recommended practice for all brands. At a minimum, every lab needs a pipette stand to prevent bench contamination and a calibration tool to verify ISO 8655 accuracy without sending instruments out.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Pipette stands for secure pipettor storage
</li>
<li dir="ltr" aria-level="1">
Carousel pipette holders for easy multi-instrument access
</li>
<li dir="ltr" aria-level="1">
Pipettor calibration tools for accuracy checks
</li>
<li dir="ltr" aria-level="1">
Pipette tip racks and refill systems
</li>
<li dir="ltr" aria-level="1">
Pipette filter replacement accessories
</li>
<li dir="ltr" aria-level="1">
Pipettor cleaning and maintenance tools
</li>
<li dir="ltr" aria-level="1">
Pipette workstation organizers
</li>
</ul>
<h2 dir="ltr"> Key Pipettor Accessory Categories</h2>
 Pipette Stands and Carousel Racks Single-position vertical stands store one pipette upright, protecting the nose cone from surface contact. Six-position carousel stands rotate 360&deg; and hold 6 pipettors of mixed sizes &mdash; the standard for a molecular biology bench set covering P2, P10, P20, P200, P1000, and P5000. Universal-format carousels (Eppendorf, Gilson, Rainin, Biohit, Thermo) accommodate most standard pipette body diameters; manufacturer-specific stands provide a precision fit. Wall-mount holder systems save bench space in smaller workspaces. In-Lab Calibration Tools Gravimetric calibration of a pipettor requires only a calibrated analytical balance (0.0001 g resolution), distilled water, and a calibration tool specific to the pipettor model for adjusting the piston stop. Manufacturer calibration kits (e.g., Gilson Pipetman Calibration Kit, Eppendorf calibration tool) allow in-lab ISO 8655 verification without sending pipettors to an external service. ISO 17025-accredited external calibration services (Gilson, Eppendorf, Rainin) issue certified calibration reports for GLP and regulatory compliance. O-Ring and Seal Service Kits Worn O-rings and seals are the most common cause of pipettor inaccuracy and tip leakage after physical damage. Service kits specific to each pipettor model (Gilson PIPETMAN service kit, Eppendorf Research Plus service kit) include O-rings, seals, and small springs for routine preventive maintenance. Gilson recommends preventive maintenance every 1&ndash;2 years or whenever calibration verification fails. Colour-Coding Rings Colour-coded silicone rings clip onto pipette barrels for quick volume identification, user assignment, or pre/post-PCR segregation in shared labs. Eppendorf ColorTag rings are available in 12 colours and 6 sizes compatible with all Eppendorf pipette models; universal-format rings fit most major brands. Charger Stands for Electronic Pipettors Electronic pipettors (Eppendorf Research Pro, Rainin Pipet-Lite XLS+) require charger stands or base docks for overnight charging. Charger stands also serve as storage; the Eppendorf Charger Stand 2 holds and charges a single electronic model on the bench. 
<h2 dir="ltr"> Specifications Context</h2>
 Pipettor stands should be used per all major manufacturer guidelines &mdash; Eppendorf, Gilson, and Rainin all specify vertical storage as the correct position to prevent liquid ingress into the piston. ISO 8655 calibration requires distilled water at 20&deg;C, a balance with 0.0001 g resolution, and a minimum of 10 dispenses per volume setting. Eppendorf ColorTag rings are available in 6 sizes covering pipettes from 2 &micro;L to 5,000 &micro;L.&nbsp; Eppendorf, Gilson, and Rainin offer both in-lab calibration tools and ISO 17025-certified external calibration services.&nbsp; 
Is your workstation as organized as your research? Don&rsquo;t wait for a pipette to fall or a seal to fail. <a href="https://mbpinc.net/contact-us" style="color: #236fa1;">Connect with the MBP team</a> today to stock up on the essentials that keep your lab running like clockwork.

Pipettor Accessories

Pipettor Racks for Diamond Pipettes

The Pipettor Racks for Diamond Pipettes by Globe Scientific are acrylic bench stands for Diamond and Diamond PRO single-channel pipettors. Available as 3310-4 (4-place) and 3310-6 (6-place). The 4-place stand is included in the Diamond PRO 3311-COMBO bundle.

Pipette Stand, 4-Place, for Diamond Pipettes, Acrylic

Pipette Stand, 6-Place, for Diamond Pipettes, Acrylic

Plastic Beakers

<h2 data-section-id="174q2lb" data-start="139" data-end="167">What Are Plastic Beakers?</h2>
&nbsp;
Plastic beakers are shatterproof cylindrical laboratory vessels manufactured from polypropylene (PP) or polymethylpentene (PMP), designed for safe and lightweight liquid handling in environments where glass breakage is a concern. Polypropylene (PP) is the most commonly used material due to its strong chemical resistance to dilute acids, bases, alcohols, and most aqueous reagents, along with autoclavability at 121&deg;C and permanently molded graduations that do not fade with use. Polymethylpentene (PMP) offers higher optical clarity and better heat tolerance, making it suitable for applications requiring visual monitoring of solutions. Choose PP plastic beakers for routine buffer preparation, aqueous reagents, teaching labs, and field use; choose glass beakers when working with organic solvents, high temperatures above ~135&deg;C, or when maximum optical clarity is required.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Options from 5mL for micro-work to 10,000mL for bulk prep.
</li>
<li dir="ltr" aria-level="1">
High-clarity polypropylene built for heavy reagent use.
</li>
<li dir="ltr" aria-level="1">
Options for Tri-corner beaker are also available.
</li>
<li dir="ltr" aria-level="1">
Molded-in graduations that never fade or rub off.
</li>
<li dir="ltr" aria-level="1">
Engineered for drip-free pouring and zero-waste transfers.
</li>
<li dir="ltr" aria-level="1">
Stock up with Case Packs or grab a single unit.
</li>
</ul>
&nbsp;
<h2 data-section-id="149sszu" data-start="1054" data-end="1086">How to Choose Plastic Beakers</h2>
&nbsp;
Material: Polypropylene vs. Polymethylpentene
Polypropylene (PP) beakers are the standard choice in most laboratories because they are autoclavable at 121&deg;C, cost-effective, and resistant to a wide range of aqueous reagents including dilute acids and bases. They are typically translucent and designed for general-purpose laboratory workflows. Polymethylpentene (PMP) beakers, on the other hand, offer near-glass optical clarity (approximately 90% light transmission) and can tolerate higher temperatures up to around 175&deg;C, making them suitable for applications where visibility of the solution is important during mixing or heating.
Graduation Type: Molded-In
Plastic beakers at MBP feature molded-in graduations that are permanently embossed into the wall of the vessel. These markings remain legible even after repeated autoclaving, chemical exposure, and washing cycles, making them more durable than printed alternatives and ideal for long-term reuse.
Volume Range
MBP supplies plastic beakers in sizes ranging from 5 mL to 10,000 mL. Small-volume beakers (5&ndash;50 mL) are used for micro-scale reagent preparation, while mid-range sizes (250 mL&ndash;1,000 mL) are standard for routine buffer preparation. Large-capacity beakers (2,000&ndash;10,000 mL) are used for bulk reagent mixing, media preparation, and large-scale laboratory workflows.
Tri-Corner Beaker Option
Tri-corner (tri-pour) beakers are a specialized plastic format designed with three pour spouts for controlled dispensing and reduced dripping. These are commonly used in reagent distribution stations, waste handling, and workflows requiring frequent liquid transfer. They are typically made from polypropylene and complement standard round-form beakers.
&nbsp;
<h2 data-section-id="1jl751w" data-start="3281" data-end="3306">Specifications Context</h2>
&nbsp;
Polypropylene (PP) has a density of approximately 0.91 g/cm&sup3; and is chemically resistant to dilute acids (HCl, H₂SO₄), bases (NaOH, KOH), alcohols, and most aqueous buffers. However, it is not compatible with concentrated oxidizing acids (such as concentrated nitric or sulfuric acid) or halogenated organic solvents (such as chloroform, methylene chloride, or xylene). Molded graduations typically maintain an accuracy of &plusmn;5% of total capacity. PMP provides higher transparency and improved heat resistance compared to PP but is generally more expensive.
MBP stocks plastic beakers in a full range of sizes from 5 mL to 10,000 mL, including standard round-form and tri-corner designs for institutional laboratory use.
Upgrade to equipment that truly lasts the lab life. Look through our website and <a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;">contact the MBP team</a> for a quote to get lab supplies that won't let you down.

Laboratory Essentials

Pitchers with Molded Graduations

Pitchers with Molded Graduations by Globe Scientific have permanent molded graduations, molded-in handle with ergonomic thumb grip, no-drip pour spout. Autoclavable 121°C/20 min. Available in 500mL, 1000mL, 2000mL, 3000mL, and 5000mL, case or single unit.

Beaker with Handle, PP, Molded Graduations, 500mL, CS/60

Beaker with Handle, PP, Molded Graduations, 500mL, EA

Beaker with Handle, PP, Molded Graduations, 1000mL, CS/48

Beaker with Handle, PP, Molded Graduations, 1000mL, EA

Beaker with Handle, PP, Molded Graduations, 2000mL, CS/36

Beaker with Handle, PP, Molded Graduations, 2000mL, EA

Beaker with Handle, PP, Molded Graduations, 3000mL, CS/27

Beaker with Handle, PP, Molded Graduations, 3000mL, EA

Beaker with Handle, PP, Molded Graduations, 5000mL, CS/12

Beaker with Handle, PP, Molded Graduations, 5000mL, EA

Stir Bars

<h2>What Are Hotplate and Stirrer Accessories?</h2>
&nbsp;
Hotplate and stirrer accessories are supplementary components for single-position and multi-position hotplate stirrers that improve temperature accuracy, expand vessel compatibility, enable reflux setups, and maintain equipment in working condition. The most important accessory for research-grade hotplate use is an external temperature probe, which monitors actual solution temperature rather than hotplate surface temperature, which can be 20 to 50 degrees C higher than the liquid in the vessel. PTFE stir bars in standard cylindrical, oval, octagonal, cross-shaped, and polygon geometries allow matching of bar shape to vessel type and mixing requirement. Support rods and clamp assemblies secure condensers, separating funnels, and other glassware above the hotplate for reflux chemistry. Magnetic stir bar retrieval wands recover stir bars from flasks without contaminating the solution. An external temperature probe is the single most impactful hotplate stirrer accessory: without one, you are controlling plate temperature, not solution temperature, and the two can differ by 20 to 50 degrees C.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li data-section-id="dpsp0x" data-start="25" data-end="139">Temperature sensors for compatible GHS-series hotplate stirrers, available in standard and glass-coated designs.</li>
<li data-section-id="yvvor4" data-start="140" data-end="248">Sensor support stands and clamps for secure positioning of temperature probes during heating applications.</li>
<li data-section-id="hdqu1" data-start="249" data-end="353">Support rods and clamp sets for mounting laboratory apparatus and accessories above hotplate stirrers.</li>
<li data-section-id="rtdv85" data-start="354" data-end="446">Magnetic stir bars, including standard and pivot ring styles, for efficient sample mixing.</li>
<li data-section-id="1hl26tt" data-start="447" data-end="560" data-is-last-node="">Chemically resistant clamp set options featuring inert PTFE construction for demanding laboratory environments.</li>
</ul>
&nbsp;
<h2>How to Choose Hotplate and Stirrer Accessories</h2>
&nbsp;
External temperature probes
Confirm probe type compatibility with the hotplate stirrer model: most digital hotplate stirrers accept either a PT1000 resistance temperature detector (RTD) or a Type K thermocouple, and these are not interchangeable between models. The probe is inserted directly into the solution and feeds temperature data back to the PID controller to maintain the solution (not the plate surface) at the setpoint. Probe length and sheath material (stainless steel, glass, or PTFE) should be matched to the vessel size and chemical compatibility requirements.
PTFE stir bars: geometry and size
PTFE stir bars are available in cylindrical, oval (egg-shaped), octagonal, cross (X-shape), polygon, and ring geometries. Cylindrical bars are the most common general-purpose format. Octagonal bars provide more turbulent mixing in flat-bottomed vessels than cylindrical bars. Cross-shaped bars improve mixing in round-bottom flasks by preventing the bar from riding the wall. Ring or hoop bars are used for mixing around fixed probes or frits inside the vessel. Stir bar length is selected to match vessel diameter, typically 30 to 50% of vessel inner diameter.
Support stands and clamp sets.
Support stands (rod-and-base assemblies) mount above or adjacent to the hotplate to hold condensers, addition funnels, thermometers, and other glassware in reflux setups. Confirm rod diameter compatibility with the clamp set (most lab glassware clamps fit 12.7 mm or 16 mm rods). Weighted bases provide stability for tall assemblies. Crossbar assemblies allow horizontal positioning of clamps at adjustable heights along the support rod.
Magnetic stir bar retrieval tools
Stir bar retrievers are magnetic wands encased in a non-contaminating sleeve (PTFE or glass) that attract and remove the stir bar from a vessel without inserting fingers or metal into the sample. Available as handheld wands or bench-mounted extractors. An essential accessory for labs processing multiple samples per day, as losing track of stir bars is among the most common minor equipment management issues in bench chemistry.
Replacement sensors and calibration weights
Temperature probes degrade after repeated heating cycles or chemical exposure; replace probes showing drift against a calibrated reference thermometer. For hotplate stirrer models with external calibration weights (balance verification), confirm the weight set is OIML or ASTM traceable for regulated workflows.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
PTFE stir bars should be inspected regularly for chipped or worn PTFE coating. Bare metal exposure from a chipped bar contaminates the sample with metallic particles and alters the bar's magnetic coupling properties, resulting in reduced mixing efficiency or bar stall at lower speeds. Discard and replace any stir bar showing PTFE damage. For regulated lab environments (GMP, ISO 17025), maintain a stir bar inventory log and retire bars on a scheduled basis. External temperature probes rated for immersion in aqueous solutions should be verified against a calibrated reference thermometer at least annually; probes showing more than 1 degree C deviation should be recalibrated or replaced.&nbsp;
&nbsp;
Looking for that one missing piece to complete your setup? Browse our accessories collection and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a friendly quote today.

Hotplate & Stirrer Accessories

Pivot Ring Stir bar

The PTFE Magnetic Stir Bars by Globe Scientific are 260°C-rated, chemically inert PTFE-encased stir bars with polarity-aligned alloy magnet cores, suitable for all laboratory stirring and hotplate applications. Available as Pivot Ring (SWN501–SWN511, 11 sizes 12–70 mm), Oval (SWN520–SWN528, 6 sizes 20–50 mm), Cylindrical (SWN652–SWN676, 13 sizes 6–70 mm), Micro (SWN950, SWN954, SWN956), 22-bar Assortment Set (SWN515), and Retrievers (SWN564, SWN566).

Stir bar, pivot ring, PTFE, 15 mm long x 4.5 mm OD, BAG/2

Stir bar, pivot ring, PTFE, 12 mm long x 4.5 mm OD, BAG/2

Stir bar, pivot ring, PTFE, 20 mm long x 6 mm OD, BAG/2

Stir bar, pivot ring, PTFE, 25 mm long x 6 mm OD, BAG/2

Stir bar, pivot ring, PTFE, 35 mm long x 6 mm OD, BAG/2

Stir bar, pivot ring, PTFE, 45 mm long x 8 mm OD, BAG/2

Stir bar, pivot ring, PTFE, 40 mm long x 8 mm OD, BAG/2

Stir bar, pivot ring, PTFE, 60 mm long x 9.5 mm OD, BAG/2

Stir bar, pivot ring, PTFE, 50 mm long x 8 mm OD, BAG/2

Stir bar, pivot ring, PTFE, 70 mm long x 9.5 mm OD, BAG/2

Stir bar, pivot ring, PTFE, 30 mm long x 6 mm OD, BAG/2

Stir bar, oval, PTFE, 20 mm long x 10 mm OD, BAG/2

Stir bar, oval, PTFE, 25 mm long x 12 mm OD, BAG/2

Stir bar, oval, PTFE, 30 mm long x 16 mm OD, BAG/2

Stir bar, oval, PTFE, 35 mm long x 16 mm OD, BAG/2

Stir bar, oval, PTFE, 40 mm long x 20 mm OD, BAG/2

Stir bar, oval, PTFE, 50 mm long x 20 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 6 mm long x 3 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 8 mm long x 3 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 12 mm long x 4.5 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 15 mm long x 4.5 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 20 mm long x 6 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 25 mm long x 6 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 30 mm long x 6 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 35 mm long x 6 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 40 mm long x 8 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 45 mm long x 8 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 50 mm long x 8 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 60 mm long x 9 mm OD, BAG/2

Stir bar, cylindrical, PTFE, 70 mm long x 9.5 mm OD, BAG/2

Stir bar, micro, PTFE, 7 mm long x 2 mm OD, BAG/2

Stir bar, micro, PTFE, 10 mm long x 3 mm OD, BAG/2

Stir bar, micro, PTFE, 13 mm long x 3 mm OD, BAG/2

Stir bar set, includes 22 stir bars, EA

Stir bar retriever, PTFE, 250 mm long, EA

Stir bar retriever, PTFE, 350 mm long, EA

15ml & 50ml Centrifuge Tubes

<h2 data-section-id="155qizo" data-start="0" data-end="33">What Are All Centrifuge Tubes?</h2>
&nbsp;
The All Centrifuge Tubes collection includes the complete range of tube sizes commonly used in research, clinical, and laboratory environments. These tubes range from small 0.5 mL and 1.5&ndash;2 mL microtubes used in microcentrifuge applications to 5 mL and 10 mL midi tubes for intermediate sample volumes, as well as 15 mL and 50 mL conical tubes designed for cell culture, density gradient preparation, and larger-volume sample processing. They are available in polypropylene (PP) for enhanced chemical resistance and temperature tolerance or polystyrene (PS) for improved optical clarity.
&nbsp;
What you will find:
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/microcentrifuge-tubes" title="Microcentrifuge Tubes">Microcentrifuge Tubes</a> &ndash; Precision-engineered for small-volume sample preparation.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/screw-cap-tubes" title="Screw Cap Tubes">Screw Cap Tubes</a> &ndash; Secure, leak-proof closures for long-term storage and transport.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/15ml-and-50ml-centrifuge-tubes" title="15ml &amp; 50ml Centrifuge Tubes">15ml &amp; 50ml Centrifuge Tubes</a> &ndash; Standard conical bottom tubes for large-volume processing.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/midicentrifuge-tubes-5ml-and-10ml" title="Midicentrifuge Tubes (5ml &amp; 10ml)">Midicentrifuge Tubes (5ml &amp; 10ml)</a> &ndash; The perfect bridge for intermediate sample sizes.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/microtubes-box" title="Microtubes Box">Microtubes Box</a> &ndash; Durable storage racks for organized sample management and protection.
</li>
</ul>
&nbsp;
<h2 data-section-id="1f93yys" data-start="914" data-end="963">How to Choose From All Centrifuge Tube Formats</h2>
&nbsp;
Volume and Rotor Compatibility
Selecting the correct tube size is essential for safe and efficient centrifugation. Microtubes ranging from 0.5&ndash;2 mL are designed for microcentrifuges, while 5&ndash;10 mL midi tubes fit compatible benchtop centrifuge rotors. Larger 15 mL and 50 mL conical tubes are commonly used in clinical and research centrifuges. Always verify rotor compatibility before introducing a new tube format into your workflow.
Sterility Requirements
For sensitive applications such as RNA extraction, cell culture, and clinical diagnostics, sterile tubes certified free of RNase, DNase, and pyrogens are recommended. Non-sterile tubes can provide a cost-effective solution for routine DNA analysis, protein assays, and general sample storage where sterility is not critical.
Material Selection
Polypropylene tubes offer excellent durability, can be autoclaved at 121 &deg;C, and resist many laboratory chemicals and solvents. Polystyrene tubes provide superior transparency, making it easier to monitor liquid levels and sample contents, although they are less resistant to heat and solvents.
Packaging and Inventory Planning
Microtubes are commonly available in pack sizes ranging from 500 to 1,000 units, while 15 mL and 50 mL conical tubes are often supplied in cases of 500. Laboratories with consistent usage may benefit from establishing recurring purchase orders to ensure uninterrupted supply.
&nbsp;
<h2 data-section-id="urfo3f" data-start="2395" data-end="2433">Compare Centrifuge Tube Size Groups</h2>
&nbsp;
Microtubes (0.5&ndash;2 mL) are primarily used for PCR preparation, microcentrifuge applications, and storage of small sample volumes. These are typically manufactured from polypropylene and are available in pack sizes of 500&ndash;1,000 units.
Midi tubes (5&ndash;10 mL) support intermediate-volume centrifugation and supernatant collection. They are commonly made from polypropylene and supplied in packs ranging from 100&ndash;500 units.
15 mL conical tubes are widely used for cell pelleting, RNA isolation, and clinical sample processing. They are available in both polypropylene and polystyrene formats and are generally packaged in cases of 500.
50 mL conical tubes are designed for larger-volume workflows, including tissue culture, density gradient preparation, and sample processing. Like 15 mL tubes, they are available in polypropylene and polystyrene and are commonly sold in cases of 500.
&nbsp;
<h2 data-section-id="1ezckh3" data-start="3318" data-end="3348">Specifications and Features</h2>
&nbsp;
Globe Scientific and Nest Scientific centrifuge tubes are manufactured from USP Class VI virgin polypropylene or polystyrene resin and are certified free from detectable RNase, DNase, and pyrogens. Sterile products are irradiated using gamma or E-beam methods to achieve a sterility assurance level (SAL) of 10⁻⁶. MBP offers both racked and bagged formats for 15 mL and 50 mL conical tubes, along with dispenser-box options for selected microtube product lines that support efficient use in high-throughput laboratory environments.
For procurement teams, MBP accepts purchase orders and offers institutional pricing for bulk and high-volume purchases. <a href="https://mbpinc.net/contact-ushttps://mbpinc.net/contact-us" title="Contact the MBP team" style="color: #236fa1;">Contact the MBP team</a> today to learn more

All Centrifuge Tubes

Tubes, Caps & Racks Catalog

TDS-112010

6260-Group-TDS-112040

Plain Top Centrifuge Tubes

Plain Top Centrifuge Tubes by Globe Scientific are 15 mL centrifuge tubes, 16 × 120 mm, with molded graduations from 0.5-15 mL in 0.5 mL increments. Available in PS (6260, 6260-250, 6265, 6265-100) or PP (6261, 6261-250, 6266, 6266-100), in case, bag, or dispenser-box packaging; a PS version with a separate plug cap (6262) is also available. Order from MBP, a registered vendor to Howard Hughes Medical Institute, Vanderbilt University, MD Anderson Cancer Center, Eurofins, and many other institutes across the USA.

Centrifuge Tube, 15mL, PS, Molded Graduations, 250/Bag, 4 Bags/Unit, CS/1000

Centrifuge Tube, 15mL, PS, Molded Graduations, 250/Bag, BAG/250

Centrifuge Tube, 15mL, PS, Molded Graduations, 100/Dispenser Box, 10 Boxes/Unit, CS/1000

Centrifuge Tube, 15mL, PS, Molded Graduations, 100/Dispenser Box, BOX/100

Centrifuge Tube, 15mL, PP, Molded Graduations, 250/Bag, 4 Bags/Unit, CS/1000

Centrifuge Tube, 15mL, PP, Molded Graduations, 250/Bag, BAG/250

Centrifuge Tube, 15mL, PS, Molded Graduations, with Separate Natural Plug Cap, CS/1000

Centrifuge Tube, 15mL, PP, Molded Graduations, 100/Dispenser Box, 10 Boxes/Unit, CS/1000

Centrifuge Tube, 15mL, PP, Molded Graduations, 100/Dispenser Box, BOX/100

Centrifuge Tubes

<h2>What Are Centrifuge Tubes?</h2>
 Centrifuge tubes are cylindrical laboratory containers with caps that are used to separate, pellet, and store biological or chemical samples through centrifugal force. They are commonly made from polypropylene (PP) or polystyrene (PS) and are available in sizes ranging from small 0.5 mL microtubes to larger 50 mL conical tubes. These tubes are widely used for cell pelleting, protein precipitation, DNA and RNA extraction, tissue homogenate clarification, and long-term sample storage. Depending on the material, they can withstand temperatures from &minus;80 &deg;C to +121 &deg;C.
In short, the best centrifuge tube depends on your centrifuge rotor, required g-force, sample volume, and sterility needs. 
<h2>What You Will Find: </h2>
<ul>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes" title="All Centrifuge Tubes">All Centrifuge Tubes</a>: Comprehensive selection of 15 mL and 50 mL conical tubes with clear graduations for daily lab workflows.</li>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/oak-ridge-style-centrifuge-tubes" title="Oak Ridge Style Centrifuge Tubes">Oak Ridge Style Centrifuge Tubes</a>: High-speed, chemical-resistant tubes designed to withstand extreme RCF without deformation.</li>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/centrifuge-bottles" title="Centrifuge Bottles">Centrifuge Bottles</a>: Heavy-duty, larger-capacity vessels engineered for bulk sample processing and high-velocity runs.</li>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/large-volume-centrifuge-tubes" title="Large Volume Centrifuge Tubes">Large Volume Centrifuge Tubes</a>: Industrial-strength 250 mL and 500 mL tubes optimized for pilot-scale harvesting and bioprocessing.</li>
</ul>
&nbsp;
<h2>How to Choose Centrifuge Tubes</h2>
 Volume and Rotor Compatibility
Select a tube size that matches both your sample volume and centrifuge rotor. Microtubes ranging from 0.5&ndash;2 mL are commonly used in microcentrifuges and can typically handle speeds up to 20,000 &times; g. Midi tubes in the 5&ndash;10 mL range are suitable for intermediate sample volumes, while 15 mL and 50 mL conical tubes are commonly used in clinical, research, and preparative centrifuges.
Material: Polypropylene vs. Polystyrene
Polypropylene (PP) tubes offer excellent chemical resistance and can tolerate temperatures from &minus;80 &deg;C to +121 &deg;C. They are suitable for autoclaving and exposure to many laboratory solvents. Polystyrene (PS) tubes provide superior optical clarity, making it easier to visually inspect samples and liquid levels, but they have lower resistance to solvents and extreme temperatures.
Sterility and Contamination Control
Sterile centrifuge tubes are typically gamma- or E-beam-irradiated and certified free of RNase, DNase, and pyrogens. These tubes are recommended for RNA extraction, cell culture, and clinical applications where contamination must be minimized. Non-sterile tubes may still be RNase- and DNase-free and are often suitable for routine DNA work and general sample storage.
Cap Design
Attached screw caps help prevent cap mix-ups and sample contamination, especially in high-throughput laboratories. Separate caps can be quicker to open and may be preferred in workflows that require frequent access to samples. If tubes will be used with automated systems, cap dimensions should be verified for compatibility with liquid handling equipment.
Packaging Options
Racked tubes provide convenient organization and allow direct pipetting while the tubes remain in the rack. Bulk-bagged tubes offer a more economical option for laboratories that process large volumes of samples and already have tube storage systems in place.
<h2> Comparing Common Centrifuge Tube Types</h2>
 Microtubes (0.5&ndash;2 mL) are ideal for PCR preparation, microcentrifuge applications, and storage of small sample volumes. They can generally withstand centrifugal forces up to 20,000 &times; g.
Midi tubes (5&ndash;10 mL) are designed for intermediate sample volumes such as culture supernatants and can typically tolerate forces up to 16,000 &times; g.
Sterile 15 mL conical tubes are frequently used for cell pelleting, RNA extraction, and clinical sample processing, with typical ratings between 12,000 and 15,000 &times; g.
Sterile 50 mL conical tubes are commonly selected for larger-volume applications including tissue culture work, density gradient preparation, and large-scale sample processing.
Polystyrene conical tubes in 15 mL and 50 mL formats are often chosen when visual sample inspection is important and solvent exposure is minimal.
<h2> Specifications and Features</h2>
 Polypropylene centrifuge tubes from Globe Scientific and Nest Scientific are manufactured from USP Class VI virgin resin and do not contain plasticizers or processing additives. Sterile products are typically irradiated to achieve a sterility assurance level (SAL) of 10⁻⁶. Most 15 mL tubes feature graduation marks at 1 mL intervals, while 50 mL tubes are usually graduated every 5 mL. MBP offers both bagged and racked centrifuge tube formats, including 15 mL and 50 mL conical tubes as well as smaller microtube and midi tube options.
MBP supports procurement departments by accepting purchase orders and offering institutional pricing for qualified high-volume customers. <a href="https://mbpinc.net/contact-us">Contact the MBP team today</a> for a customized quote.

Plain Top Graduated Centrifuge Tubes

The Plain Top Graduated Centrifuge Tubes by Globe Scientific are 12 mL plain-top (non-flared) centrifuge tubes graduated at 0.5, 1, 2.5, 5, and 10 mL; cap sold separately. Available in PS (112010 2000/cs, 112010-500 500/bag) and PP (112040 2000/cs, 112040-500 500/bag).

Centrifuge Tube, 16 x 100mm (12mL), PS, with Separate White Plug Cap, CS/2000

Centrifuge Tube, 16 x 100mm (12mL), PS, 500/Bag, CS/500

Centrifuge Tube, 16 x 100mm (12mL), PP, 500/Bag, 4 Bags/Unit

Centrifuge Tube, 16 x 100mm (12mL), PP, 500/Bag

Capillary Tubes

<h2 dir="ltr">What are Capillary Tubes? </h2>
 Capillary tubes for laboratory use are thin-walled, open-ended tubes&mdash;typically 75 mm long with an internal diameter of 1.1&ndash;1.2 mm&mdash;that collect microvolume blood samples (40&ndash;80 &micro;L) by capillary action from finger-stick or heel-stick punctures, directly from anticoagulated blood collection tubes, or from blood gas analyzers. They are the primary consumables for the micro-hematocrit (packed cell volume, PCV) determination: tubes are filled, sealed, centrifuged at 10,000&ndash;14,500 RPM for 5 minutes, and the ratio of packed red cells to total blood column is read against a hematocrit chart. Globe Scientific manufactures both soda lime glass and plastic (unbreakable) micro-hematocrit capillary tubes, as well as pre-calibrated borosilicate glass tubes for blood gas applications. Choose heparinized capillary tubes for direct finger-stick collection from untreated blood; choose plain (untreated) tubes when filling from an anticoagulated blood collection tube.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Glass capillary tubes for micro-volume liquid transfer</li>
<li dir="ltr" role="presentation">Heparinized capillary tubes for blood sample collection</li>
<li dir="ltr" role="presentation">Plain capillary tubes for general laboratory applications</li>
<li dir="ltr" role="presentation">Micro-hematocrit capillary tubes for blood analysis</li>
<li dir="ltr" role="presentation">Sealed-end and open-end capillary tubes for flexible workflows</li>
<li dir="ltr" role="presentation">Disposable precision-bore tubes for single-use sampling</li>
<li dir="ltr" role="presentation">Calibrated microcapillary tubes for consistent volume uptake</li>
<li dir="ltr" role="presentation">Thin-walled tubes for rapid capillary action filling</li>
<li dir="ltr" role="presentation">Sterile capillary tubes for diagnostic applications</li>
<li dir="ltr" role="presentation">General-purpose laboratory micro-sampling tubes</li>
</ul>
<h2 dir="ltr"> How to Choose Capillary Tubes</h2>
 Plain vs. Heparinized Plain capillary tubes (blue tip, Globe Scientific) are used when filling from a pre-anticoagulated specimen (EDTA or citrate blood collection tube). Heparinized tubes prevent clotting in samples collected directly from a skin puncture: ammonium heparin&ndash;coated tubes (green tip) and sodium heparin&ndash;coated tubes (red tip) are both available. The tip color is the universal identifier &mdash; confirm the coding convention with your supplier before ordering, as some manufacturers reverse the color assignments. Glass vs. Plastic Soda lime glass capillary tubes (Globe Scientific catalog 51602&ndash;51607) provide excellent capillary action, low surface adsorption, and superior optical clarity for reading the hematocrit column. Plastic capillary tubes (catalog 51620) eliminate the sharps hazard from glass breakage during centrifugation&mdash;a significant occupational safety consideration for high-volume clinical labs processing hundreds of hematocrit determinations daily. Both formats fit standard 75 mm hematocrit centrifuges. Pre-Calibrated (Blood Gas) Tubes Pre-calibrated borosilicate glass capillary tubes (Globe Scientific catalog 51628, I.D. 0.55 mm &plusmn; 0.03 mm) are precision-ground for blood gas and co-oximetry analyzers requiring specific internal volume tolerance. These differ from standard hematocrit tubes in inner diameter; using the wrong tube in a blood gas analyzer causes instrument error codes and inaccurate analyte results. Centrifuge Compatibility All 75 mm micro-hematocrit capillary tubes are compatible with standard hematocrit centrifuges rated for 10,000&ndash;14,500 RPM. Confirm your centrifuge head accepts the tube O.D. (1.5 mm &plusmn; 0.05 mm for Globe Scientific glass tubes) before ordering in bulk.
<h2 dir="ltr"> Specifications Context</h2>
 Globe Scientific soda lime glass micro-hematocrit capillary tubes have an I.D. of 1.15 mm &plusmn; 0.05 mm, O.D. of 1.5 mm &plusmn; 0.05 mm, and a length of 75 mm &plusmn; 1 mm, with a fill volume of approximately 75 &micro;L. The standard centrifugation protocol is 10,000&ndash;14,500 RPM for 5 minutes in a dedicated hematocrit centrifuge. Normal hematocrit ranges: 38&ndash;50% for adult males, 35&ndash;47% for adult females; values outside this range, combined with elevated ESR and other CBC parameters, are used to evaluate anemia, polycythemia, and inflammatory conditions. As of 2026, Globe Scientific is an ISO 9001:2015&ndash;certified manufacturer and MBP-stocked supplier of both glass and plastic capillary tube formats. 
For specifications, size options, or bulk ordering support, <a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;">connect with the MBP team</a> to choose the right capillary solution for your laboratory application.

Flyer

51680-Group-Lab Supplies for Physicians Offices

Plastic Micro-Hematocrit Capillary Tubes

Plastic Micro-Hematocrit Capillary Tubes by Globe Scientific — 75 mm PETG, 1.55 mm OD, 0.90 mm ID, 45 µL. Unbreakable plastic; spin 12,000 RPM for 4 minutes. 1,000 tubes per box. Available plain/blue tip (51680), ammonium heparinized/green tip (51684), and sodium heparinized/red tip (51686).

Capillary Tube, Microhematocrit, 100% PLASTIC, Blue Tip, Plain, 100/Vial, 10 Vials/Unit, BOX/1000

Capillary Tube, Microhematocrit, 100% PLASTIC, Green Tip, Ammonium Heparinized, 100/Vial, 10 Vials/Unit, BOX/1000

Capillary Tube, Microhematocrit, 100% PLASTIC, Red Tip, Sodium Heparinized, 100/Vial, 10 Vials/Unit, BOX/1000

Test Tubes

<h2 dir="ltr">What are Test Tubes?</h2>
 Test tubes for laboratory use are open-ended, cylindrical glass or plastic tubes used to hold, mix, incubate, and heat liquid and solid samples across a broad range of applications: bacteriological culture, tissue culture, clinical chemistry, serological assays, immunology, and general sample processing. Choose borosilicate glass for reusable, high-temperature, or chemically demanding applications; choose polystyrene disposable 12&times;75 mm tubes for flow cytometry and colorimetric assays; choose polypropylene capped tubes for microbial culture with anaerobic or gas-generating organisms.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">Glass test tubes in diverse formats for heating and chemical reaction workflows</li>
<li dir="ltr" aria-level="1">
Plastic polypropylene test tubes for routine laboratory use
</li>
<li dir="ltr" aria-level="1">
Graduated tubes for quick and easy volume estimation
</li>
<li dir="ltr" aria-level="1">
Conical and round-bottom tube formats for different applications
</li>
<li dir="ltr" aria-level="1">
Sterile disposable test tubes for clinical and diagnostic work
</li>
<li dir="ltr" aria-level="1">
Heat-resistant tubes for incubation and controlled heating steps
</li>
</ul>
&nbsp;
<h2 dir="ltr">How to Choose Test Tubes</h2>
 Material: Glass vs. Polypropylene vs. Polystyrene Borosilicate glass 3.3 (ASTM E438 Type I, Class B) test tubes withstand direct flame, autoclave sterilization at 121 &deg;C, and most solvents, acids, and bases. They are reusable and autoclavable, making them cost-effective over high-volume laboratory runs. Polystyrene (PS) disposable tubes offer outstanding optical clarity for flow cytometry (FACS), cell counting, and OD-based colorimetric assays, but cannot be autoclaved and should not be used with aromatic solvents or strong acids. Polypropylene (PP) tubes are chemically resistant, autoclavable, and available with screw caps for anaerobic culture or gas-generating reactions. Rimmed vs. Rimless Rimless test tubes (fire-polished ends) allow easier insertion of rubber or silicone stoppers and are preferred for plugging with cotton wool for microbial culture. Rimmed tubes have a flared lip that facilitates pouring and is compatible with spring-metal tube closures. Confirm your closure type before ordering in bulk. Size and Volume The most common test tube dimensions in clinical and research labs: 12&times;75 mm: ~5 mL capacity; standard for flow cytometry, FACS, serology 13&times;100 mm: ~10 mL; general culture and chemistry 16&times;100 mm: ~14 mL; culture and chemistry 16&times;125 mm: ~17 mL; microbiological culture 18&times;150 mm: ~25 mL; larger-volume digests and culture Wall thickness of 1.2 mm (light wall, borosilicate 3.3) is the standard for general lab use; heavy-wall versions are used for digestions and applications involving vacuum or pressure. Sterile vs. Non-Sterile Sterile borosilicate glass culture tubes (individually wrapped or bulk-sterilized) are required for microbial culture, cell culture, and any application where contamination would invalidate the result. Non-sterile tubes are adequate for chemistry, spectroscopy, and other abiotic applications. Disposable PS tubes from Corning (PYREX&trade;) and Globe Scientific are supplied sterile or non-sterile; confirm the specification on the lot certificate. 
<h2 dir="ltr"> Specifications Context</h2>
 Borosilicate glass 3.3 test tubes have a linear thermal expansion coefficient of 3.3 &times; 10⁻⁶ K⁻&sup1;, providing resistance to thermal shock from room temperature to 300 &deg;C (direct flame) and from 0 to 121 &deg;C (autoclave cycles). Light-wall tubes (1.2 mm uniform wall thickness) provide the standard for general laboratory use; heavy-wall variants (2.0 mm) are used for digestion vessels and pressurized applications. Corning PYREX&trade; disposable round-bottom rimless glass tubes for tissue culture conform to ASTM standards and are the reference format for bacteriological serology and cell wash procedures. MBP supplies Globe Scientific and NEST Scientific test tube lines for research and clinical labs across the USA, Canada, and worldwide. &nbsp; 
If you&rsquo;re choosing between glass and plastic or trying to match the right size to your workflow, it&rsquo;s worth getting that part right early &mdash; it makes everything downstream smoother and a lot less messy. <a href="https://mbpinc.net/contact-us">Contact the MBP team now!</a>

110158-Group-Tubes, Caps & Racks Catalog

Plastic Tubes with Dual Position Snap Cap

Globe Scientific sterile 17 × 100 mm culture tubes with attached dual-position LDPE snap cap. Polystyrene (110158, 1,500 RPM, optical clarity) and polypropylene (110178, 3,000 RPM, autoclavable, freezable). 25/bag, 500/cs.

Culture Tube, 17 x 100mm (15mL), PS, STERILE, Attached Dual Position Cap, 25/Bag, 20 Bags/Unit, CS/500

Culture Tube, 17 x 100mm (15mL), PP, STERILE, Attached Dual Position Cap, 25/Bag, 20 Bags/Unit, CS/500

Vortex Mixers Accessories

<h2>What are vortex mixer accessories?</h2>
&nbsp;
Vortex mixer accessories are the interchangeable cup heads, foam inserts, and platform adapters that convert a standard single-tube vortex mixer to batch-process multiple tubes or different vessel formats simultaneously. The standard single-tube cup head can be replaced with a multi-tube foam insert holding 6 to 24 microcentrifuge tubes, a tube strip or microplate adapter, or a platform-style attachment for larger vessel formats. These accessories are typically instrument-specific, using a proprietary attachment mechanism that varies between vortex mixer brands.&nbsp;
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Tube racks for 0.5 ml, 1.5/2.0 ml, 12 mm, 13 mm, and 15 ml tubes</li>
<li dir="ltr" role="presentation">High-capacity tube racks for holding up to 96 samples</li>
<li dir="ltr" role="presentation">Horizontal heads for mixing 2 &times; 50 ml tubes and 4 &times; 15 ml tubes</li>
<li dir="ltr" role="presentation">Foam tube holders for 6 mm, 10 mm, 12 mm, and 16 mm tubes</li>
</ul>
&nbsp;
<h2>How to choose vortex mixer accessories</h2>
&nbsp;
Select foam inserts by the tube format they accommodate
Foam inserts for vortex mixers are sized to hold specific tube formats by pressing the closed tube caps into the foam at defined positions: standard microcentrifuge inserts hold 1.5 mL and 2 mL tubes, larger foam blocks accommodate 15 mL and 50 mL conical tubes, and low-profile inserts hold 0.5 mL tubes or PCR strip tubes in defined arrays. Check that the insert format matches the tube types you use most and that the insert is rated for your vortex mixer's speed range.
Confirm accessory compatibility with your vortex mixer model
Vortex mixer accessories attach via model-specific connectors &mdash; threaded onto the drive spindle or clipped onto the instrument head &mdash; and are not universally compatible between brands or models. Always check that the specific accessory is listed as compatible with your vortex mixer model before ordering.
Use a microplate adapter for 96-well plate mixing
Microplate vortex adapters replace the standard cup head with a flat or recessed platform sized to hold a standard 96-well plate, allowing entire plates to be mixed in continuous mode for ELISA plate washing steps, microplate cell resuspension, and plate-format biochemical assays. The adapter should be rated for the speed at which it will be used to prevent plate sliding.
Check that foam insert speed ratings are compatible with your operating speed
Foam inserts are rated for a maximum operating speed, and using a foam insert at speeds above its rating risks tubes not being securely retained by the foam compression at high rpm. Confirm that the insert's rated speed covers your intended operating speed before batch-processing valuable samples.
Consider a universal platform adapter for flexible use
Some vortex mixer manufacturers offer a universal platform adapter that replaces the cup head with a flat non-slip platform, accepting a wide range of vessel formats using a non-slip mat for retention. While less format-specific than a dedicated foam insert, a universal platform provides flexibility for less common vessel formats.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Foam inserts work by compressing foam around tube caps to provide frictional retention during high-speed oscillation; foam material and cell size determine tube sizes accommodated and maximum safe speed. As of 2026, inserts accommodating PCR strip tubes alongside microcentrifuge tubes in a single insert have become available, reducing the number of separate formats needed.
<a href="https://mbpinc.net/contact-us">Contact the MBP team</a> today to request a quote and find the right accessories for your vortex mixer.

Vortex Mixer Accessories

Plate Adapter, Round, Universal, 100mm, for use with GVM Series Vortex Mixers (for use with Foam Tube Adapters and Dimpled Pad)

GVM-AS-PLATE by Globe Scientific — 100&nbsp;mm universal round plate adapter for all GVM Series Vortex Mixers. Enables use with foam tube adapters and the dimpled pad accessory. Required mounting component for the GVM-AS-ADAPT12 12-place tube holder.

Lab Supplies for Physicians Offices

Plug Caps for Test Tubes

Plug Caps for Test Tubes by Globe Scientific are PE friction-fit caps for 11, 12, and 16 mm tubes in multiple colors for sample identification. 11 mm: 112430 (natural); 12 mm series: 118139B–118139Y (8 colors); 16 mm: 116132 (white, high-grip), 116142 series (white, blue, green, red, yellow).

Cap, Plug, 16mm, High Grip, White, BAG/1000

Cap, Plug, 16mm, White, 1000/Bag, CS/10000

Cap, Plug, 16mm, Blue, 1000/Bag, CS/10000

Cap, Plug, 16mm, Green, 1000/Bag, CS/10000

Cap, Plug, 16mm, Red, 1000/Bag, CS/10000

Cap, Plug, 16mm, Yellow, 1000/Bag, CS/10000

Cap, Plug, 12mm, Blue, CS/20000

Cap, Plug, 12mm, Clear, CS/20000

Cap, Plug, 12mm, Green, CS/20000

Cap, Plug, 12mm, Lavender, CS/20000

Cap, Plug, 12mm, Orange, CS/20000

Cap, Plug, 12mm, Red, CS/20000

Cap, Plug, 12mm, White, CS/20000

Cap, Plug, 12mm, Yellow, CS/20000

Cap, Plug, 11mm, Natural, BAG/1000

Plug Stoppers - For 12mm Tubes

Globe Scientific PE plug stoppers for 12mm tubes, 1,000/bag. Six colors: Blue (113139B), Clear (113139C), Green (113139G), Lavender (113139L), Red (113139R), Yellow (113139Y). Snap-fit polyethylene cap.

Blue

Clear

Green

Lavender

Yellow

Cuvettes

<h2 dir="ltr">What are Cuvettes?</h2>
 Cuvettes are small, precision-dimensioned transparent vessels used to hold liquid samples in the light path of a spectrophotometer, fluorometer, or colorimeter for measurement of absorbance, transmittance, fluorescence intensity, or fluorescence polarization. The standard cuvette has a 10 mm optical path length (the distance light travels through the sample), a square or rectangular cross-section, and an internal volume of 1&ndash;4 mL. Cuvettes are manufactured in four main materials&mdash;polystyrene (PS) or polymethylmethacrylate (PMMA) plastic, optical glass, UV-grade quartz (fused silica), and IR quartz&mdash;each covering a different wavelength range. Choose plastic cuvettes for routine visible-light absorbance (380&ndash;780 nm) where disposability prevents cross-contamination; choose optical glass for reusable visible-range work (340&ndash;2,500 nm); choose UV quartz when measurements extend into the UV range below 340 nm (190&ndash;2,500 nm).
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li data-section-id="1cg0wqn" data-start="1810" data-end="1862">Spectrophotometer cuvettes for absorbance analysis</li>
<li data-section-id="vbobpt" data-start="1863" data-end="1890">Polystyrene (PS) cuvettes</li>
<li data-section-id="14z5a6i" data-start="1891" data-end="1906">PMMA cuvettes</li>
<li data-section-id="1h4vr7o" data-start="1907" data-end="1966">Analyzer-specific cuvettes for clinical chemistry systems</li>
<li data-section-id="b3k6fl" data-start="1967" data-end="1998">Standard path length cuvettes</li>
<li data-section-id="td8a19" data-start="1999" data-end="2043">Accessories for spectrophotometer cuvettes</li>
</ul>
<h2 dir="ltr"> How to Choose Cuvettes</h2>
 Material and Wavelength Range Plastic (PS/PMMA) cuvettes transmit visible light from 380&ndash;780 nm and are single-use, eliminating cleaning and cross-contamination risk. They are unsuitable for UV measurements, organic solvents, or strong acids. Optical glass cuvettes transmit 340&ndash;2,500 nm, covering the full visible and near-infrared range; Different manufacturers recommend different procedures. UV quartz cuvettes are traditionally used for DNA/RNA quantification at OD260/OD280 because they transmit UV wavelengths below 340 nm. IR quartz extends to 3,500 nm for near-IR applications. Optical Path Length The standard 10 mm path length follows the Beer-Lambert law at normal sample concentrations. Semi-micro (5 mm path) and micro-volume cuvettes (1 mm path, or internal volumes down to 10&ndash;70 &micro;L) are used for precious or limited-volume samples. The path length directly multiplies absorbance: a 1 mm cuvette gives 1/10 the absorbance of a 10 mm cuvette for the same solution &mdash; account for this in Beer-Lambert calculations. Volume: Macro vs. Semi-Micro vs. Micro Macro cuvettes (1&ndash;4 mL) are the standard for routine spectrophotometry. Semi-micro cuvettes (0.5&ndash;1.5 mL) reduce sample consumption. Micro cuvettes (10&ndash;350 &micro;L) are used when sample volume is limited; sub-micro cuvettes (10 &micro;L or less) suit precious clinical or research samples. Confirm that your spectrophotometer's beam height and aperture are compatible with the cuvette format before purchasing micro formats. Two-Window vs. Four-Window Standard cuvettes have two optically clear windows (the light-entry and exit faces) and two frosted or ribbed side walls for gripping. Four-window (all-clear) cuvettes are required for fluorescence measurements at 90&deg; to the excitation beam &mdash; the two additional clear windows allow emitted fluorescence to exit perpendicular to the excitation path. Confirm whether your instrument requires a standard or fluorescence-grade cuvette. Reusable vs. Disposable Quartz and glass cuvettes are reusable; their higher up-front cost&nbsp;is justified for low-throughput precision work or when solvents or UV wavelengths are required. Plastic cuvettes cost fractions of a cent per use and eliminate washing time in high-throughput assay workflows. Select disposable plastic for any routine colorimetric assay (Bradford, BCA, ELISA plate reader backup, OD600 bacterial growth) where wavelengths stay in the visible range. 
<h2 dir="ltr"> Specifications Context</h2>
&nbsp;
The 10 mm path length standard cuvette has internal dimensions of 10 &times; 10 mm cross-section and an internal height of approximately 45 mm. Outer dimensions are 12.5 &times; 12.5 mm, fitting all standard spectrophotometer cell holders. Window parallelism tolerance is &plusmn;0.01 mm for precision quartz cuvettes; standard optical glass cuvettes have &plusmn;0.1 mm tolerance. Light transmission through UV quartz: &gt;90% at 220 nm and &gt;85% at 200 nm. For nucleic acid quantification, a UV quartz cuvette with a minimum path length of 10 mm is required for OD 260/280 measurements; the ratio of OD260/OD280 should be 1.8&ndash;2.0 for pure DNA and 1.9&ndash;2.1 for pure RNA as a purity indicator. As of 2026, plastic disposable cuvettes remain the most cost-efficient choice for labs running &gt;50 absorbance readings per day in the visible range.
&nbsp;
Need the right fit? MBP can guide you to cuvettes that match your workflow perfectly. For institutional pricing and PO-based bulk ordering, <a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;">contact MBP</a>&nbsp;directly.

111147-Group-Analyzer Consumables Catalog

111147-Group-TDS-112157

111147-Group-TDS-112147

111147-Group-TDS-111157

111147-Group-TDS-111147

PMMA Spectrophotometer Cuvette

The PMMA Spectrophotometer Cuvette by Globe Scientific is a disposable 10 mm pathlength UV-grade PMMA cuvette (280&#8211;800 nm, &#177;1% absorption variation). Available as 4.5 mL macro/2-side (111147, 1,000/cs), 4.5 mL macro/4-side (111157, 500/cs), 2.5 mL semi-micro/2-side (112147, 1,000/cs), and 1.5 mL micro/2-side (112157, 500/cs).

Cuvette, Spectrophotometer, Square, 4.5mL (10mm), UV Grade Methacrylate, 2 Clear Sides, 100/Tray, 5 Trays/Unit, 1000/CS

Cuvette, Spectrophotometer, Square, 4.5mL (10mm), UV Grade Methacrylate, 4 Clear Sides, 100/Tray, 5 Trays/Unit, CS/500

Cuvette, Semi-Micro, 2.5mL, with 2 Clear Sides, UV Grade Polymethylmethacrylate (PMMA), 100/Tray, 5 Trays/Unit, 1000/Cs

Cuvette, Micro, 1.5mL, with 2 Clear Sides, UV Grade Polymethylmethacrylate (PMMA), 100/Tray, 5 Trays/Unit, CS/500

United States

Texas

mbpinc