Vaccum Pumps

Agilent Pumps

<h2>What are Agilent vacuum pumps?</h2>
&nbsp;
Agilent Technologies vacuum pump portfolio originates from Varian Vacuum Products and includes dry scroll pumps (IDP series) and oil-sealed rotary vane pumps. The IDP series provides oil-free vacuum for analytical instruments, while rotary vane pumps provide higher-throughput roughing vacuum where oil use is acceptable.
&nbsp;
<h2 data-start="403" data-end="428">What you will find:</h2>
&nbsp;
Agilent IDP-7 5.4 cfm Oil-Free Compact Dry Scroll Pump &ndash; Compact oil-free pump for laboratory vacuum applications
Agilent IDP-3 2.1 cfm Oil-Free Compact Dry Scroll Pump - 110V &ndash; Small footprint pump for clean vacuum operation
Agilent IDP-15 9 cfm Oil-Free Compact Dry Scroll Pump &ndash; High-capacity dry scroll pump for demanding workflows
Agilent TwisTorr 74 FS Turbo Pump Package &ndash; Turbo pumping system for high-vacuum applications
&nbsp;
<h2>How to choose an Agilent vacuum pump</h2>
&nbsp;
Choose IDP dry scroll pumps for oil-free instrument backing
The Agilent IDP series (IDP-3, IDP-7, IDP-15) provides oil-free dry scroll vacuum for backing turbomolecular pumps in mass spectrometers, electron microscopes, and other analytical instruments.
Match model to pumping speed
IDP model numbers correspond to pumping speed: IDP-3 for small instruments, IDP-7 for general use, and IDP-15 for higher gas load applications.
Use rotary vane pumps for higher throughput
Varian SD and DS rotary vane pumps provide oil-sealed roughing vacuum with higher throughput than dry scroll pumps at similar cost.
Check instrument compatibility
Many analytical instruments specify approved vacuum pump models. Agilent IDP pumps are commonly listed for LC-MS and GC-MS systems, so compatibility should be confirmed before selection.
Consider maintenance requirements
IDP scroll pumps use replaceable tip seal kits with service intervals typically between 6000&ndash;15,000 hours depending on operating conditions.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Agilent IDP dry scroll pumps use two interlocking scrolls &mdash; one fixed and one orbiting &mdash; to compress gas without oil, producing clean vacuum suitable for contamination-sensitive analytical instruments.
As of 2026, IDP-7 and IDP-15 remain widely used as standard roughing pumps for analytical platforms such as mass spectrometry systems.
<a href="https://mbpinc.net/equipments/pumps/vaccum-pumps/agilent-pumps">Contact the MBP team</a> today to learn about Agilent pump solutions for your laboratory needs.

Agilent IDP-15 9 cfm scroll pump (X3815-64000)

KF25 flexible stainless steel vacuum bellow (3.3 ft)

Agilent North America 15A/125V power cord (656458203)

Agilent IDP Dry Scroll Pump - Inlet Isolation Valve

Dry Scroll Pumps Family: Agilent IDP-series

Agilent IDP-15 9 cfm Oil-Free Compact Dry Scroll Pump

IDP-15-X3815-64000 by Agilent Technologies is the IDP-15 oil-free dry scroll pump with 9.1 cfm (15.4 m³/hr) pumping speed at 60 Hz, ultimate vacuum of 1×10⁻² Torr, NW25 inlet / NW16 outlet, 50 dB(A) noise, and universal 100–230V operation. Hermetic single-sided scroll design eliminates oil vapor backstreaming — ideal for mass spectrometers, electron microscopes, and analytical instrument evacuation.

Manufacture

Agilent IDP-3 2.1 cfm scroll pump (IDP3B01)

Documentation Kit (Contained In Plastic Bag)

Agilent IDP-3 2.1 cfm Oil-Free Compact Dry Scroll Pump - 110V

Introduction to Agilent IDP-3 Pump

IDP-3 Pump Operation Guide

IDP-3 Maintenance Instructions

The IDP3B01 by Agilent Technologies is the 110 V model of the IDP-3 oil-free dry scroll vacuum pump, delivering 2.1 CFM (3.6 m³/h) at a 3.3 × 10⁻¹ mbar ultimate pressure via a NW16 inlet flange. At 9.5 kg with a 181 × 140 × 358 mm footprint and 55 dB(A) noise level, it integrates into mass spectrometry, rotary evaporation, and lyophilization setups without oil maintenance.

Agilent IDP7 5.4 cfm scroll pump (X3807-64000)

Agilent IDP-7 5.4 cfm Oil-Free Compact Dry Scroll Pump

The IDP-7-X3807-64000 by Agilent Technologies is an oil-free dry scroll vacuum pump: 5.4 CFM (9.1 m³/hr) at 60 Hz, ultimate vacuum 2.6 x 10⁻² mbar, 52 dB(A), NW25 inlet, universal 100–240 VAC. No oil changes required. Suitable for MS backing, freeze drying, and analytical instrument vacuum. Contact MBP Inc. for a quote.

Edwards Pumps

<h2>What are Edwards vacuum pumps?</h2>
&nbsp;
These leading global vacuum technologies offer a broad range of laboratory and industrial systems. The lineup includes single-stage oil-sealed rotary vane pumps for standard workflows, robust two-stage rotary vane pumps for deeper vacuum and higher throughput, and advanced dry scroll pump series for completely oil-free operation. These systems are widely specified by analytical instrument manufacturers as the required or recommended roughing pump for mass spectrometers, electron microscopes, and other high-vacuum instruments requiring reliable rough vacuum.
&nbsp;
<h2 data-path-to-node="0">What You Will Find:</h2>
&nbsp;
<ul data-path-to-node="1">
<li>
Robust, dual-stage oil-sealed rotary vane pumps recognized across the industry for achieving fast pumping speeds and handling heavy vapor loads.
</li>
<li>
Oil-free dry scroll systems featuring hermetically sealed mechanisms to provide clean, high-performance vacuums without the risk of oil back-streaming.
</li>
<li>
Chemically resistant dry diaphragm units built with premium PTFE components to handle aggressive solvent vapors directly in routine chemistry applications.
</li>
<li>
Advanced turbomolecular pumps and integrated pumping stations engineered to deliver steady ultra-high vacuum levels for sensitive analytical instrumentation.
</li>
</ul>
&nbsp;
<h2>How to choose an Edwards vacuum pump</h2>
&nbsp;
Choose the RV series for oil-sealed single-stage deep roughing vacuum
The Edwards RV series (RV3, RV5, RV8, RV12) are single-stage oil-sealed rotary vane pumps achieving ultimate vacuum levels of approximately 0.001&ndash;0.005 mbar with pumping speeds from 3 to 12 m&sup3;/h, covering the roughing vacuum requirements of most analytical instruments from small benchtop mass spectrometers to larger research instruments.
Choose the E2M series for two-stage deep vacuum and higher throughput
The Edwards E2M series provides two-stage oil-sealed rotary vane pumping with deeper ultimate vacuum than single-stage models, reaching approximately 0.00015 mbar, and higher pumping speeds for larger instruments or applications requiring faster pump-down times.
Choose the nXDS dry scroll pump for oil-free analytical instrument backing
The Edwards nXDS series (nXDS-6i, nXDS-10i, nXDS-15i) are dry scroll pumps providing oil-free roughing vacuum to approximately 0.07 mbar ultimate vacuum, positioned as oil-free alternatives to the RV series for analytical instruments where oil contamination risk must be eliminated, similar in function to the Agilent IDP series.
Confirm Edwards pump compatibility with your instrument's specifications
Many analytical instrument manufacturers specify Edwards pump models by series and model number in their installation guides, and using the specified model ensures compatibility with the instrument's vacuum system connections, flow requirements, and expected pump-down time. Using a pump of insufficient pumping speed can prevent an instrument from reaching operating vacuum within the expected time.
Plan for oil maintenance requirements of oil-sealed RV and E2M models
RV and E2M series pumps require regular oil changes using Edwards-specified Ultragrade pump oil, with oil condition monitoring recommended and oil change intervals dependent on the application's chemical exposure and operating cycle. A cold trap upstream prevents solvent vapor from contaminating the oil and shortening oil life.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Edwards RV series rotary vane pumps achieve their deep ultimate vacuum using a two-gas-ballast system that can be opened to purge condensable vapors from the oil during pump operation, reducing the rate of oil contamination when operating in humid environments or when small amounts of condensable vapors are present. As of 2026, Edwards RV and nXDS pumps remain among the most widely specified roughing pump series for analytical instrument installations, with the nXDS gaining adoption as an oil-free alternative to the RV for new installations where oil-free operation is preferred.
<div class="html-content mt-[30px] rounded-[30px] border border-gray5 px-5 py-6">
<a href="https://mbpinc.net/contact-us">Get in touch with the experts at MBP</a> today to request your custom quote.
</div>

Edwards RV8 6.9 CFM Dual-Stage Vacuum Pump with Bellow & Fitting

RV8 by Edwards is a dual-stage rotary vane oil-sealed vacuum pump with 6.9 CFM pumping speed and a NW25/KF25 inlet, rated at 48 dB(A) and weighing 57 lbs. Includes 3-ft KF25 stainless steel bellows, flange hardware, Ultragrade 19 oil, and 110V power cord. Suitable for GC-MS, rotary evaporation, freeze drying, and vacuum distillation.

XDS Series Dry Scroll Vacuum Pumps

Edwards nXDS Series Dry Scroll Pumps Product Video

Edwards XDS Series Dry Scroll Pumps

The XDS35iC by Edwards Vacuum is a 35 m³/h (21 CFM) two-stage oil-free dry scroll pump in the Enhanced Corrosive series, featuring Chemraz valve pads for chemical-duty gas streams. Ultimate pressure: 0.03 mbar (no gas ballast). Input: 100–240 VAC, 50/60 Hz. KF40 inlet / KF25 exhaust. Weight: 48 kg (105 lb). 57 dB(A) noise. Edwards part number A73008983. Mains cable not included.

Edwards XDS35iC 25cfm Chemical-Resistant Scroll Pump w/ silencer

Edwards XDS46iC 35cfm Chemical-Resistant Scroll Pump w/ silencer

NXDs Series Dry Scroll Vacuum Pumps

Edwards nXDS10iC 7.5 cfm oil free scroll vacuum pump

KF25 stainless steel vacuum bellow (3 ft)

Packing Process Sheet(Printed On Receipt Paper)

Edwards nXDS10iC 7.5 cfm Chemical-Resistant Dry Scroll Pump

Edwards nXDS20iC 16.5 cfm oil free scroll vacuum pump

Edwards nXDS20iC 16.5 cfm Chemical-Resistant Dry Scroll Pump

Edwards nXDS6iC 4.0 cfm oil free scroll vacuum pump

Edwards nXDS6iC 4.0 cfm Chemical-Resistant Dry Scroll Pump

Edwards nXDS Series Dry Scroll Pumps

The nXDS10iC by Edwards Vacuum is a chemical-resistant dry scroll vacuum pump rated at 7.5 CFM (12.7 m³/h) displacement speed and 0.007 mbar (5 micron) ultimate pressure. The iC variant adds Chemraz® internal valves and stainless-steel fittings for halogenated solvent and acid vapor applications where standard elastomers fail. Oil-free operation eliminates exhaust oil mist and oil backstreaming concerns. KF25/NW25 inlet, 280W, 100–240V. Contact MBP for pricing and institutional quotes.