Brands

<h2 dir="ltr">What Are LTS-Compatible Pipette Tips?</h2>
 LTS (LiteTouch System) pipette tips use a cylindrical collar that mates with the cylindrical shaft of Rainin LTS pipettes, as opposed to the conical taper used on standard universal-fit tips. The cylindrical-to-cylindrical interface reduces the insertion force needed to seat the tip, lowering the repetitive-strain load on the hand and wrist during high-throughput pipetting &mdash; the primary ergonomic benefit Rainin's LiteTouch design addresses.&nbsp; LTS tips are required for Rainin LTS pipettes &mdash; no other tip format seats correctly. Third-party LTS-compatible tips offer equivalent performance at a lower cost than OEM.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
LTS-compatible sterile filter pipette tips
</li>
<li dir="ltr" aria-level="1">
Low-retention LTS pipette tips for improved recovery
</li>
<li dir="ltr" aria-level="1">
RNase/DNase-free LTS-compatible tips
</li>
<li dir="ltr" aria-level="1">
Racked LTS pipette tips for organized workflows
</li>
<li dir="ltr" aria-level="1">
Bulk pack LTS-compatible tips for high-throughput labs
</li>
<li dir="ltr" aria-level="1">
Extended length LTS pipette tips
</li>
<li dir="ltr" aria-level="1">
PCR-grade LTS filter tips
</li>
<li dir="ltr" aria-level="1">
Wide bore LTS tips for viscous samples
</li>
<li dir="ltr" aria-level="1">
Conductive LTS tips for automation systems
</li>
</ul>
<h2 dir="ltr"> How to Choose LTS-Compatible Tips</h2>
 Confirm Your Pipette Has LTS Not all Rainin pipettes use LTS. Rainin Classic (original PIPET-LITE) and older Rainin models use standard conical shafts and require universal-fit tips. LTS is found on Rainin Pipet-Lite XLS+, Pipet-Lite M, and multichannel L8 and L12 LTS models. Look for 'LTS' in the model name on the pipette barrel before ordering LTS-specific tips. Filtered vs Non-Filtered Non-filtered LTS tips are appropriate for buffer, media, and reagent dispensing. Filtered LTS tips &mdash; with an aerosol-barrier element &mdash; are required for PCR, RNA, and contamination-sensitive work. See the dedicated [LTS Compatible Filter Tips](mbpinc.net/consumables/liquid-handling-products/filtered-pipette-tips/lts-compatible-filter-tips [confirmed]) page for filtered LTS options. Volume Range LTS tips span approximately 20 &micro;L through 5,000 &micro;L across single-channel and multichannel pipette ranges. Common volumes: 20 &micro;L (LTS SL L10/L20), 200 &micro;L (LTS SL L200, L300), 1,000 &micro;L (LTS SL L1000), and 5,000 &micro;L macro tips for large-volume LTS pipettors. OEM Rainin vs Third-Party Compatible Rainin OEM LTS tips are manufactured to the tightest dimensional specification for LTS instruments. Third-party LTS-compatible tips are precision-moulded to LTS cylindrical geometry and certified DNase/RNase-free; they provide equivalent performance in routine applications and are typically 20&ndash;40% lower in cost than Rainin OEM tips. For critical applications (clinical diagnostics, cGMP workflows), confirm compatibility with your quality system before switching from OEM. Packaging LTS tips are available in hinged racks (10 racks &times; 96 tips = 960 tips/box) and refill wafer inserts for compatible rack bases. Sterile and non-sterile options are available across the range. 
<h2 dir="ltr"> Specifications Context</h2>
 LTS-compatible tips are manufactured from virgin polypropylene; some formats use hydrophobic low-retention PP for reduced liquid adhesion. LTS-compatible tips use hydrophobic resin technology for low retention and are certified RNase/DNase/DNA/PCR inhibitor-free. LTS tips are available from multiple third-party suppliers at 20&ndash;40% lower cost than Rainin OEM, with equivalent documented performance.&nbsp; 
Low force at every touchpoint&mdash;built to seat effortlessly, seal instantly, and keep every microliter exactly where it belongs. <a href="https://mbpinc.net/contact-us">Contact the MBP team </a>and get a tailored quote today!

LTS Compatible Pipette Tips

Pipette Tips

20µL LTS compatible tip, TipStation, sterile

200µL LTS compatible tip, TipStation, sterile

Sorenson LTS compatible tips, TipStation

The new Sorenson LTS Compatible Tips are ergonomically designed to reduce discomfort and optimized to work with Rainin LiteTouch&trade; pipettors, all with the quality you have come to expect from Sorenson.

20µL LTS compatible tip, TipStation, 4,800/Cs

20µL LTS compatible tip, TipStation, Sterile, 4,800/Cs

200µL LTS compatible tip, TipStation, 4,800/Cs

200µL LTS compatible tip, TipStation, sterile, 4,800/Cs

<h2>What is a Tube Furnace?</h2>
&nbsp;
A tube furnace is an electric heating instrument with a central cylindrical bore through which a sealed work tube is inserted, surrounded on the outside by resistive heating elements embedded in refractory insulation. Gas inlet and outlet fittings seal the tube ends with flanges, enabling the introduction of specific gas atmospheres or evacuation for vacuum operation. Quartz (fused silica) tubes are transparent, allowing visual observation, and are rated for continuous use to 1,200 degrees C. Alumina (Al2O3) ceramic tubes are opaque and stable to 1,700 degrees C, with higher chemical resistance to alkaline materials. The uniform heating zone - the central portion of the tube where temperature uniformity meets the manufacturer's specification (typically plus or minus 1-5 degrees C) - defines where samples must be placed for consistent results. Choose a tube furnace for any process requiring a controlled gas atmosphere or vacuum; choose a muffle furnace for open-air ashing, calcination, or sintering where atmosphere control is not needed.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
CVD tube furnace systems come fully equipped with gas mixing and pumping hardware, making them a complete solution for high-level chemical vapor deposition.
</li>
<li dir="ltr" aria-level="1">
Rotary and tilting furnaces provide continuous sample agitation during the heating process, ensuring every part of your material receives uniform thermal treatment.
</li>
<li dir="ltr" aria-level="1">
Split tube furnace designs feature a top-opening structure that makes it incredibly easy for your team to swap tubes or inspect samples mid-run.
</li>
<li dir="ltr" aria-level="1">
Multi-zone heating units allow you to create specific temperature gradients across the tube, giving you professional-level control over complex thermal profiles.
</li>
<li dir="ltr" aria-level="1">
RF generators and PE/CVD setups provide the specialized power needed for plasma-enhanced processes, perfect for cutting-edge thin-film research.
</li>
<li dir="ltr" aria-level="1">
Alumina tube furnaces utilize high-purity ceramic tubes and sealing flanges to maintain a clean, high-temperature environment up to 1700&deg;C.
</li>
</ul>
&nbsp;
<h2>How to Choose a Tube Furnace</h2>
&nbsp;
Work tube material
Quartz (fused silica) tubes are standard for processes up to 1,200 degrees C, are transparent (allowing visual process monitoring), and are available in diameters from 25 to 200 mm. Above 1,200 degrees C, quartz devitrifies (turns opaque and brittle) and softens. High-purity alumina (99.7% Al2O3) tubes extend the usable range to 1,700 degrees C and are chemically more resistant than quartz to alkali vapors and some metal-organic precursors used in CVD. Specialty tube materials (molybdenum, tungsten, Inconel) are used for corrosive-atmosphere or extreme-temperature applications.
Single-zone vs. multi-zone heating
Single-zone tube furnaces produce one uniform temperature zone (typically 10-30 cm long) and are standard for most annealing, sintering, and CVD applications. Multi-zone furnaces have two or more independently controlled heating zones along the tube length -- enabling temperature gradients for Bridgman crystal growth, sequential thermal profiles (debinding followed by sintering in a single run), or extended uniform zone length by running outer zones at higher power to compensate for end cooling. Multi-zone configurations feature 30-segment programmable PID control per zone and temperature control accuracy of plus or minus 1 degree C in research-grade models.
Bore diameter and heated zone length
Standard bore sizes are 25 mm (compact single-sample), 50 mm (most common research format), 80 mm, and 100 mm inner diameter for larger samples or substrate wafers. Quartz tube diameters range from 25 to 300 mm up to 1,200 degrees C; alumina tubes are available from 25 to 100 mm for processes to 1,700 degrees C. The heated zone length (10-60 cm for single-zone models) determines maximum sample length; all sample material must fit within the uniform hot zone.
Horizontal vs. vertical orientation
Horizontal tube furnaces position the tube axis parallel to the bench surface, are the most common configuration, and allow easy sample insertion via push-rod with consistent gas flow from one end to the other. Vertical tube furnaces orient the tube perpendicular to the bench, enabling gravity-assisted processes such as powder sintering, where material settles uniformly in the crucible, and crystal growth methods that exploit natural convection. Vertical configurations also reduce bench footprint for space-limited labs.
Split-hinge design
Split-hinge (clam-shell) tube furnaces open along the length of the furnace body to allow tube insertion or removal without threading through the furnace from one end. Benefits include faster tube material changes during process development, the ability to use shorter tube segments, and rapid forced cooling by opening the furnace after a run. Split-hinge models are popular for CVD process development labs where tube configurations change frequently.
Gas flow and safety requirements
Hydrogen-containing atmospheres require dedicated safety measures beyond standard inert gas setups: combustible gas sensors, local exhaust ventilation, solenoid emergency shut-off valves, nitrogen pre- and post-purge sequences, and grounding of all gas fittings. Mass flow controllers (MFCs) provide precise gas flow rate control (0-500 standard cm3 per minute, typical range) for reproducible CVD deposition conditions. Vacuum operation requires rotary vane or turbomolecular pumps, vacuum gauges, and leak-tested stainless steel Swagelok connections.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Uniform heating zone temperature uniformity of plus or minus 1-3 degrees C for research-grade single-zone tube furnaces is measured by traversing a calibrated thermocouple along the tube axis at maximum setpoint; confirm this measurement in supplier documentation. The maximum heating rate is typically 10-30 degrees C per minute; room temperature to 1,700 degrees C takes approximately 170 minutes at the maximum rate for alumina tube models with MoSi2 elements. Tube furnace bore diameters of 50 mm and 80 mm cover the majority of research sample formats; 25 mm compact models suit single-sample inline gas-flow experiments. Integrated turnkey tube furnace systems combining furnace body, MFC gas control manifold, vacuum pump, and 30-segment programmable touchscreen controller are available from specialist manufacturers, reducing new CVD process setup time significantly.
&nbsp;
To discuss product availability or get selection guidance,&nbsp;<a href="https://mbpinc.net/contact-us">contact the MBP team</a>.

Tube Furnaces

Stainless steel vacuum sealing flange set w/ pressure meter

Furnace and Eurotherm or Shimaden controller manual

TF1700 Standard Package

Across International Tube Furnace Flange Setup

How to Program the Across International Tube Furnace Eurotherm Temperature Controller?

1-Zone Specifications

1700C 1-3 Zone Tube Furnace with Alumina Tube and Sealing Flanges Specifications

2-Zone Specifications

TFM2.1700 Furnace Specifications

3-Zone Specifications

TFM3.1700 Furnace Specifications

1700C 1-3 Zone Tube Furnace with Alumina Tube and Sealing Flanges

TF1700 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Eurotherm (UK) digital multi-segment controller with built-in digital communication port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results.\r\n\r\n

Manufacturer

1-Zone 1700°C Tube Furnace OD 60mm

2-Zone 1700°C Tube Furnace 60mm OD

3-Zone 1600°C Tube Furnace 60mm OD

1-Zone 1700°C Tube Furnace OD 100mm

2-Zone 1700°C Tube Furnace 80mm OD

3-Zone 1700°C Tube Furnace 80mm OD

Analytical Balance

<h2>What Are Analytical Balances?</h2>
&nbsp;
An analytical balance is a high-precision weighing instrument that measures mass to a resolution of 0.1 mg (0.0001 g), one tenth of a milligram. The weighing mechanism uses electromagnetic force restoration (EMFR): the weighing pan is suspended by an electromagnet that applies just enough force to maintain the pan in a fixed reference position; the current required to restore this position is proportional to the mass placed on the pan, providing extremely high accuracy and repeatability across the full capacity range. A glass or polycarbonate draft shield enclosing the weighing pan prevents air currents from displacing the pan and introducing measurement errors; at 0.1 mg sensitivity, an air movement of less than 0.1 m/s can produce a reading error of 0.1 mg or more. Analytical balances cover capacities from 80 g (semi-micro models, with 0.01 mg readability in some configurations) to 520 g maximum, which accommodates weighing into standard laboratory glassware, plastic weighing boats, and small containers. They are used in quantitative chemistry (stoichiometric reagent weighing for accurate molarity calculations), pharmaceutical development (API and excipient weighing), environmental analysis (gravimetric filter weighing), food science, and materials research. An analytical balance is required whenever mass accuracy at the 0.0001 g (0.1 mg) level is needed; if the protocol reports mass to three or four decimal places or requires a minimum weighing quantity specification, an analytical balance is the correct instrument.
&nbsp;
<h2>What you will find:</h2>
&nbsp;
<ul>
<li>Analytical balances for high-precision weighing in research, analytical, and quality control laboratories.</li>
<li>Balance series with internal or external calibration options for maintaining measurement accuracy.</li>
<li>Touchscreen analytical balances with advanced weighing functions and intuitive operation.</li>
<li><a href="https://mbpinc.net/equipments/microscopes-balances-and-analytical-equipment/laboratory-balances/analytical-balance/accessories">Analytical Balance Accessories</a>, including precision vacuum gauges for monitoring vacuum levels and supporting laboratory vacuum applications.</li>
</ul>
&nbsp;
<h2>How to Choose an Analytical Balance</h2>
&nbsp;
Readability and accuracy
Readability (resolution, smallest displayable increment) for standard analytical balances is 0.1 mg. Semi-micro balances with 0.01 mg readability are specified for trace weighing, where mass differences of 0.01 mg must be detected, used in pharmaceutical microformulation, impurity weighing, and environmental particulate filter gravimetry. Accuracy (how closely the displayed value matches the true mass) is related to but distinct from readability: a well-maintained, calibrated analytical balance should show repeatability (standard deviation of 10 repeat weighings) of 0.05 mg to 0.1 mg at mid-range loads.
Internal vs. external calibration
Analytical balances with internal calibration contain a motorized calibration weight that deploys automatically when triggered by a temperature change (typically 1.5 to 2 degrees C change), a scheduled time interval, or an operator command. The balance calibrates itself and documents the event without requiring the operator to handle external weights; the preferred configuration for regulated environments and high-throughput labs. Externally calibrated balances require the operator to place a certified external weight on the pan and initiate calibration manually, appropriate for lower-frequency calibration schedules and labs where calibration is an explicitly documented QC step.
Draft shield design
Motorized sliding glass doors that open automatically when a sample is placed near the sensor and close after removal reduce the time the draft shield is open, minimize drafts around the pan during the stability period, and improve operator ergonomics. Manual sliding or hinged doors require the operator to open and close the shield for each weighing, adequate for moderate use but slower in high-throughput environments. Confirm that the door opening dimensions (width and height of the access openings) are sufficient for the weighing vessels used in your workflow.
Capacity and sample vessel compatibility
Choose capacity based on the maximum combined mass of the sample plus any tare container placed on the pan. For analytical chemistry, weighing reagents in 50 mL beakers or weighing boats, 200 g capacity covers most scenarios. For pharmaceutical weighing of larger API or excipient batches, a 520 g capacity with 0.1 mg readability is specified. Never exceed the stated maximum capacity of an analytical balance; even brief overloading can permanently damage the electromagnetic force restoration mechanism.
GLP and GMP compliance features
Analytical balances for regulated pharmaceutical and food testing environments require GLP/GMP compliance features: automatic time and date stamping of each weighing record; user login and operator ID in the printout; balance identification code; calibration status and last calibration date; minimum sample weight display (calculated from balance performance and the USP minimum weight requirement); and connectivity for data export to a LIMS or validated computer system. Confirm that the software and interface meet the regulatory requirements of the intended use.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
The minimum weighing quantity (MWQ) for an analytical balance is the minimum sample mass that can be weighed with an acceptable relative uncertainty, typically defined as 1000 times the standard deviation of repeatability, per USP 41 chapter 41 and OIML R 111 guidance. For a balance with 0.05 mg standard deviation, the minimum weighing quantity is 50 mg. Samples below this mass have a relative weighing error that exceeds the acceptable limit (commonly 0.1% relative uncertainty). Confirm the balance's MWQ specification for your smallest sample masses, and document this parameter in the balance qualification records for GLP and GMP environments.
&nbsp;
To discuss product availability or get selection guidance,&nbsp;<a href="https://mbpinc.net/contact-us">contact the MBP team</a>.

Serial Printer for Accuris Series Dx and Tx balances

Accuris™ Analytical Balance Dx Series Accessories

Series Dx Balance Specifications

Accuris™ Analytical Balance Dx Series

W3101A-120 by Accuris Instruments is a 120 g analytical balance with 0.0001 g (0.1 mg) readability, Electromagnetic Force Restoration (EFR) technology, and Quik-Cal™ internal automatic calibration for GLP-compliant lab workflows. The backlit dot matrix LCD, glass draft shield, and waterproof control panel are standard on the Dx Series.

Manufacture

Analytical Balance, series Dx, internal calibration, Graphical Display, 120gx0.0001g, 230V

Analytical Balance, series Dx, internal calibration, Graphical Display, 220gx0.0001g, 230V

Analytical Balance, series Dx, internal calibration, Graphical Display, 120gx0.0001g, 115V

Analytical Balance, series Dx, internal calibration, Graphical Display, 220gx0.0001g, 115V

<h2>What Are Vacuum Drying Ovens?</h2>
&nbsp;
A vacuum drying oven is a thermally insulated, sealed stainless steel chamber with an airtight door gasket (typically silicone or fluoropolymer), heated shelves or heated walls, a vacuum gauge, a vacuum inlet valve, and a vent valve, connected to an external rotary vane vacuum pump to achieve chamber pressures typically below 133 Pa (1 Torr). At 133 Pa, the boiling point of water drops from 100 degrees C to approximately 52 degrees C; at 0.1 kPa (75 Torr), water boils at 40 degrees C. This allows complete moisture removal at setpoints as low as 40-50 degrees C without exposing samples to temperatures that cause chemical degradation, protein denaturation, or API (active pharmaceutical ingredient) decomposition. In addition to moisture removal, vacuum drying eliminates air from the chamber, preventing oxidation of oxygen-sensitive samples during drying. Use vacuum drying ovens when samples cannot tolerate the temperatures required for efficient atmospheric drying, when oxygen must be excluded during drying, or when trapped moisture in micro-pores and internal cavities requires low partial pressure to extract.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
AccuTemp &amp; AT X Series Ovens: Premium UL/CSA certified vacuum ovens featuring internal heating technology for superior temperature accuracy.
</li>
<li dir="ltr" aria-level="1">
Large Capacity Units: Heavy-duty systems with up to 7.6 cubic feet of space and aluminum shelves for maximum heat transfer.
</li>
<li dir="ltr" aria-level="1">
Complete Oven Packages: Turnkey solutions that bundle multiple ovens, high-vacuum pumps, and cold traps into a fully integrated station.
</li>
<li dir="ltr" aria-level="1">
Mobile Laboratory Carts: Heavy-duty steel carts engineered specifically for mounting and transporting ovens and auxiliary equipment safely.
</li>
<li dir="ltr" aria-level="1">
Advanced Digital Controls: High-accuracy controllers paired with reinforced observation windows for secure monitoring of vacuum and heat levels.
</li>
</ul>
&nbsp;
<h2>How to Choose a Vacuum Drying Oven</h2>
&nbsp;
Maximum vacuum level
The maximum vacuum level (depth of vacuum achievable) determines the lowest sample drying temperature possible. Standard vacuum ovens achieve 0.098 MPa (approximately 133 Pa, or ~1 Torr) with a single-stage rotary vane pump, lowering water's boiling point to about 50 degrees C. A deeper vacuum below 133 Pa requires a two-stage rotary vane pump or turbomolecular pump; the conductscience BOV-V/VL model specifies a vacuum below 133 Pa as the achievable level. Confirm the vacuum pump connection port diameter (NW16 or NW25 KF flange standard) matches the available pump.
Temperature range and shelf heating
Most vacuum drying ovens cover RT plus 10 to 200 degrees C; the BOV-V/VL series specifies temperature stability of plus or minus 1 degree C. Heated shelves (electrically heated aluminum or stainless steel shelves that actively transfer heat directly to samples on the shelf surface) provide better heat transfer than heated-wall designs in vacuum, because convection is absent at low pressure. Confirm the model uses heated shelves rather than heated walls only, particularly for large or dense samples that depend on conductive heating.
Chamber material and corrosion resistance
The inner chamber material must resist corrosion from the solvents or moisture vapor being removed. Standard chambers use 304 stainless steel. For aggressive organic solvents (halogenated solvents, strong acids during pharmaceutical processing), 316L stainless steel or glass-lined chambers are preferred. The DZF-6020 model specification calls out a 304 stainless steel chamber with PID temperature control and a 0.098 MPa vacuum degree. Confirm the door gasket material (silicone standard; Viton/fluoropolymer for solvent resistance) is compatible with the vapors being generated.
Vacuum gauge type
Vacuum ovens are equipped with either an analog Bourdon-tube vacuum gauge (robust, no power required, reads 0-0.1 MPa vacuum range) or a digital vacuum sensor with display. Digital sensors provide more precise pressure readings and can be connected to automated control systems. For regulatory environments requiring vacuum pressure documentation (pharmaceutical QC), a calibrated digital vacuum transducer with data output is the appropriate choice.
Cold trap requirement
When drying samples containing organic solvents, a cold trap (cooled condenser between the oven outlet and the vacuum pump inlet) is essential to condense solvent vapors before they reach the pump oil. Solvent contamination of pump oil degrades pump performance, shortens pump life, and creates hazardous contaminated oil waste. Cold traps using dry ice/acetone (to -78 degrees C) or Peltier-cooled units (to -30 to -50 degrees C) are standard for solvent recovery applications.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
At 0.098 MPa vacuum (133 Pa), the boiling point of water is approximately 50 degrees C, and the boiling point of common organic solvents is reduced proportionally: ethanol boils at approximately 34 degrees C, acetone at 20 degrees C, and isopropanol at 46 degrees C at 133 Pa. Standard vacuum ovens achieve 0.098 MPa vacuum degree with single-stage rotary vane pumps drawing 5-15 L/min free air flow; larger chamber volumes require higher-capacity pumps to achieve the target vacuum in a reasonable pump-down time. Dual-zone intelligent PID control (independent control of top and bottom shelf temperature zones) has become a standard feature in research-grade vacuum ovens above 0.5 cu. ft. capacity, addressing the temperature gradient between shelf positions in larger chambers.&nbsp;
&nbsp;
Browse the full vacuum drying oven collection and<a href="https://mbpinc.net/contact-us"> contact our team</a> for a quote today.

Vacuum Drying Ovens

Ai UL/CSA certified 0.9 cu ft vacuum oven

AT-09

AT-19

AT-32

AT-75a

AT-160

Ai AccuTemp 1.9 Cu Ft Vacuum Oven Installation Calibration (Spanish Version)

Want to know how to install the Across International Vacuum Oven in your Lab?

Across International AT Series Vacuum Ovens Key features

AI AccuTemp Vacuum Drying ovens Specifications

AI AccuTemp Vacuum Drying ovens

AccuTemp series vacuum ovens are the #1 award-winning brand in vacuum systems. They greatly minimize the drying time for various materials, all while providing excellent temperature uniformity inside the chamber. A vacuum environment will also lower the boiling point for liquids, which is great for heat-sensitive material processing. The spacious vacuum ovens feature our internal shelf heating technology. Each of these built-in shelves has its own heating, in-shelf temperature sensor, and PID controller. With our low-proportional controllers, the result is perfect temperature uniformity, accuracy, and ultra-fast heating rates.

250C UL Certified 0.9 CF Vacuum Oven 5 Sided Heat - 110V 60Hz

250C UL Certified 1.9 CF Vacuum Oven 5 Sided Heat SST Tubing

250C UL Certified 3.2 CF Vacuum Oven w/ 3 Shelves & SST Tubing

250C UL Certified 7.5 CF Vacuum Oven w/ 5 Shelves & SST Tubing

100C UL Certified 16 CF Vacuum Oven w/ 6 Shelves & SST Tubing

CO2 Incubator

Extra Shelf, stainless steel, for H2505-40

Extra Shelf, stainless steel, for H2505-70

Extra Shelf, stainless steel, for H2505-130

Additional shelf for 45 liter incubators, 1 each

Additional shelf for 180 liter incubators, 1 each

Stacking kit for 180 liter incubator (height of top display approximately 135cm)

IncuView Integrated Microscope Shelf, 45L (For H3565-45 Only)

IncuView Integrated Microscope Shelf, 180L (For H3565-180, 180HD and 180HDO2 Only)

SureTemp™ C02 180L Incubators, with High heat Decontamination

H3565-180HD by Benchmark Scientific is the SureTherm™ 180L Plus CO2 incubator with high-heat decontamination, controlling temperature (ambient +5°C to 60°C, ±0.1°C) and CO2 (0–20%, ±0.1%) via a dual-beam infrared sensor. The high-heat decontamination cycle runs at 125°C for 8 hours to eliminate mycoplasma, bacteria, and fungal contamination without chemical agents. Heated door and door frame prevent condensation. Exterior 22 × 26.2 × 37.2 in; 172 lbs; 115V / 700W.

Temperature Range

Temperature Accuracy

Temperature Uniformity

Temperature Increments

Temperature Stability

CO₂ Range

CO₂ Increment

CO₂ Accuracy

CO₂ Sensor

Heat Decontamination

O₂ Range

O₂ Accuracy

Chamber Material

Exterior Dimensions

Weight

Electrical

Split Inner Door

Power Consumption

Warranty

SureTherm CO2 Incubator, 180L with High heat Decontamination, 115V

SureTherm CO2 Incubator, 180L with High heat Decontamination, 230V

SureTherm CO2 Incubator, 180L with High heat Decontamination, Split Window Door and O2 control, 230V

SureTherm CO2 Incubator, 180L with High heat Decontamination, Split Window Door and O2 control, 115V

Hotplate & Stirrer

<h2>What Are Laboratory Hotplates and Stirrers?</h2>
&nbsp;
Laboratory hotplates are electrically heated work surfaces used to warm flasks, beakers, and vessels containing reagents, culture media, buffers, and reaction mixtures. Magnetic stirrers use a rotating magnetic field beneath the plate to spin a PTFE-coated stir bar inside the vessel, providing uniform mixing without mechanical contact. Combination hotplate-stirrer units integrate both functions in a single instrument and are the most common format in chemistry, biology, and pharmaceutical labs. Standalone magnetic stirrers (without heating) are used for room-temperature mixing, pH measurement, and buffer preparation. Applications include chemical synthesis and recrystallization, cell culture media preparation, buffer and reagent preparation, dissolution testing, enzyme assays, protein and nucleic acid precipitation, and polymer synthesis. Digital hotplate-stirrers with PID temperature control, external probe inputs for actual solution temperature monitoring, and PTFE-coated ceramic or aluminum plates are the standard in research-grade instruments. Choose a combination hotplate-stirrer for most bench chemistry and biology work; choose a standalone magnetic stirrer for room-temperature mixing where a heating element would be a contamination or safety risk.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/equipments/temperature-control-equipment/hotplate-and-stirrers/magnetic-stirrers" title="Magnetic Stirrers">Magnetic Stirrers</a> provide powerful, quiet rotation using high-quality magnetic bars to ensure your liquids are blended perfectly every time.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/equipments/temperature-control-equipment/hotplate-and-stirrers/hotplate-and-stirrer-accessories" title="Hotplate &amp; Stirrer Accessories">Hotplate &amp; Stirrer Accessories</a> include everything from extra stir bars to external temperature probes, helping you customize your setup for better accuracy.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/equipments/temperature-control-equipment/hotplate-and-stirrers/multi-position-hotplate-stirrers" title="Multi-Position Hotplate Stirrers">Multi-Position Hotplate Stirrers</a> allow you to process several samples at once with uniform heat and speed, making your high-throughput days much more manageable.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/equipments/temperature-control-equipment/hotplate-and-stirrers/overhead-stirrers" title="Overhead Stirrers">Overhead Stirrers</a> deliver the high-torque power needed for thick, high-viscosity liquids that standard magnetic stirrers just can't handle.
</li>
</ul>
&nbsp;
<h2>How to Choose a Lab Hotplate or Stirrer</h2>
&nbsp;
Hotplate-only vs. stirrer-only vs. combination unit
Hotplates without a stirring function are used for applications requiring only controlled heating: drying samples, warming baths, or maintaining solution temperature without agitation. Standalone stirrers (no heating) handle room-temperature mixing, titrations, and sample homogenization without thermal risk. Combination hotplate-stirrers serve both purposes in one instrument and are the standard choice for chemistry and cell biology benches where both heating and mixing are regularly needed.
Plate material: ceramic vs. stainless steel vs. aluminum
Ceramic top plates resist corrosive chemical spills, provide a white surface ideal for titrations and colorimetric work, and withstand temperatures up to 550 degrees C. Stainless steel plates offer stronger magnetic coupling and higher stirring force, preferred for dense suspensions or high-viscosity liquids. Aluminum plates heat and cool faster than ceramic, making them suitable for applications requiring rapid temperature changes. PTFE-coated plates are chemically resistant but limited to lower temperatures.
Temperature range and accuracy
Standard combination units reach 300 degrees C to 380 degrees C on the plate surface. Digital PID-controlled units with an external temperature probe monitor actual solution temperature (not plate temperature) and maintain the solution within plus or minus 1 degree C at setpoint, which is important for temperature-sensitive enzyme reactions, crystallization protocols, and culture media preparation. Analog units without external probes rely on plate surface temperature, which can differ significantly from solution temperature.
Stirring speed and stir bar volume
Stirring speed ranges from 100 rpm for gentle mixing to 1500 rpm for vigorous suspension. Match stir bar size to vessel volume: a 10 mm bar for tubes and small vials, a 25 mm to 40 mm bar for 50 mL to 500 mL beakers, and a 50 mm to 80 mm bar for 1 L to 5 L vessels. Using a stir bar too large for the vessel prevents rotation; too small causes inefficient mixing.
Safety features
For work with flammable solvents, specify an explosion-proof or EX-rated hotplate with enclosed heating elements that do not produce sparks. Digital models with over-temperature alarms and contact temperature sensors on the plate surface prevent runaway heating events. Some models include motor auto-shutoff if the stir bar decouples, reducing the risk of unattended overheating.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Maximum plate temperature (300 to 550 degrees C) is a surface rating; actual solution temperature depends on vessel geometry, fill volume, and heat loss. Use an external temperature probe (PT1000 or thermocouple) inserted into the solution for accurate setpoint control. Plate dimensions (typically 135 mm x 135 mm to 300 mm x 300 mm) determine the vessel sizes the unit can safely support; oversized vessels extending beyond the plate perimeter are unstable. PTFE stir bars should be inspected for wear periodically, as chipped PTFE releases particles into the solution; replace any stir bar showing surface damage.&nbsp;
&nbsp;
Ready to stir things up? Take a look through our hotplate and stirrer collection and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a friendly quote today.

Hotplate & Stirrers

Optional Rod for Hotplate/Stirrer (H3770 Series)

Optional Temperature Probe (H3770 Series)

Clamp Set for H3770

Clamp Set for H3770 (Chemically Resistant/Inert Teflon)

Digital Hotplate Stirrers (10 x 10″) Series

The H3710-HS by Benchmark Scientific is a 10 × 10-inch digital hotplate magnetic stirrer with a chemical-resistant white ceramic plate, 35–400°C temperature range, 150–1500 rpm speed range, and 15 L maximum stir capacity. It runs at 120V/750W with a large digital display, a 50°C safety LED, and optional external probe support for ±1°C sample accuracy—backed by a 2-year warranty.

Temp. Range

Speed Range

Platform Dimensions

Operating Temp. Range

Dimensions (w x d x h)

Digital Hotplate Magnetic Stirrer, 10 x 10 inch, 115V

Digital Hotplate Magnetic Stirrer, 10 x 10 inch, 230V

Digital Hotplate, 10 x 10 inch, 115V

Digital Hotplate, 10 x 10 inch, 230V

Magnetic Stirrer, 10 x 10 inch, 115V

Magnetic Stirrer,  10 x 10 inch, 230V

SureTherm™ C02 Incubators

H3565-45 by Benchmark Scientific is the SureTherm™ 45L CO2 Incubator with Dual Beam IR CO2 Sensor — providing ±0.1% CO2 accuracy (0–20% range), ±0.1 °C temperature accuracy (ambient +5–60 °C), and 6-sided direct heating with a heated door for uniform, condensation-free culture conditions. Stainless steel chamber (13.2 × 14.2 × 15.4 in interior), 2 shelves included, 300W, 120V or 230V. Two-year warranty. Optional IncuView live-cell microscope shelf, O2 regulator, and stacking kit available.

Chamber Dimensions

 Chamber Volume

SureTherm CO2 Incubator, 45L, 115V

SureTherm CO2 Incubator, 45L, 230V

SureTherm CO2 Incubator, 180L, 230V

SureTherm CO2 Incubator, 180L, 115V

<h2 dir="ltr"> What Are Filtered Pipette Tips?</h2>
 Filtered pipette tips contain a hydrophobic aerosol-barrier plug &mdash; polyethylene (PE) frit or cellulose &mdash; embedded inside the tip body, positioned to intercept aerosol and liquid that would otherwise travel up through the tip collar into the pipette barrel during dispensing or when handling volatile or splashing samples. The filter protects the pipette barrel from internal contamination (which requires costly professional decontamination) and protects samples from cross-contamination by previously deposited nucleic acids, proteins, or biohazardous material in the barrel. Filtered tips are the standard consumables for PCR and qPCR setup, RNA extraction, cDNA synthesis, working with radioactive or biohazardous agents, and any workflow where a single contaminated barrel could compromise a run or an experiment. Non-filtered tips remain appropriate for routine buffer, media, and reagent dispensing where cross-contamination through the barrel is not a concern. Use filtered tips for all nucleic acid work, PCR, and biohazardous samples; use standard tips for routine buffer and reagent dispensing.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li><a href="https://mbpinc.net/consumables/liquid-handling-products/pipette-tips/universal-fit-pipette-tips" title="Universal Fit Filter Tips">Universal Fit Filter Tips:</a> &ndash; Designed to fit a wide range of standard pipettes, with options including wide-bore, low-retention, sterile, RNase/DNase-free, and aerosol barrier formats to support diverse liquid handling applications while maintaining sample integrity.</li>
<li><a href="https://mbpinc.net/consumables/liquid-handling-products/filtered-pipette-tips/lts-compatible-filter-tips" title="LTS Compatible Filter Tips:">LTS Compatible Filter Tips:</a>&nbsp;Optimized for high-performance pipetting systems, featuring extended-length and rack-packed configurations for deep-vessel access, with bulk-pack options available to support reliable, high-throughput laboratory workflows.</li>
</ul>
<h2 dir="ltr"> How to Choose Filtered Pipette Tips</h2>
 Filter Material: Polyethylene Frit vs Cellulose Hydrophobic PE frits are the most common and most studied aerosol-barrier material; they block liquid ingress reliably without absorbing sample material or releasing fibres. Cellulose filters are used in some barrier tips (including the original Thermo Barrier tips); they are effective aerosol barriers but can absorb a small volume of aqueous sample, relevant at &le;10 &micro;L, where the absorbed volume is proportionally significant.
Universal Fit vs LTS-Compatible Filtered Tips Universal filtered tips use standard collar geometry (3.8 mm for &le;10 &micro;L, 6.1 mm for &le;200 &micro;L) and fit Eppendorf, Rainin Classic (non-LTS), and Thermo pipettes. LTS-compatible filtered tips use Rainin's cylindrical LTS mounting geometry and are required for Rainin LTS pipettes.&nbsp;
Low-Retention Filtered Tips Low-retention filtered tips combine an aerosol barrier with a hydrophobic inner tip wall, reducing liquid adhesion during dispensing. They are recommended for small-volume (&le;10 &micro;L) nucleic acid work, RNA, protein, and enzyme dispensing, where both contamination protection and volume accuracy are critical.
Volume Range Filtered tips are available across 10 &micro;L (P2&ndash;P10), 20 &micro;L (P20), 100 &micro;L (P100), 200 &micro;L (P200), 300 &micro;L, 1,000 &micro;L (P1000), and 1,250 &micro;L extended formats. Extended-length filtered tips reach deep into 15 mL and 50 mL conical tubes for nucleic acid elution and sample transfer steps.
Packaging Filtered tips are typically sterile-racked (96/rack, 10 racks/box); reload/refill formats are available for high-volume filter tip users.
<h2 dir="ltr"> Specifications Context</h2>
 Globe Scientific filter tips are certified free of human DNA, RNase, DNase, pyrogens, and PCR inhibitors; sterile, in flip-top or hinged racks. Sorenson Bioscience universal filter tips span 10&ndash;1,250 &micro;L in standard rack and EcoRack reload formats, pre-sterilised, DNase/RNase-free. Invitrogen Barrier Tips (Thermo Fisher) are the original reference for nucleic acid work with cellulose filter elements; compatible with Eppendorf pipettes. Globe Scientific, Nest Scientific, and Sorenson Bioscience filtered tips are stocked by MBP Inc.&nbsp; 
&nbsp;
Don&rsquo;t let cross-contamination stall your progress. <a href="https://mbpinc.net/contact-us" style="color: #236fa1;">Reach out to the MBP team</a> today for a quote or to find the perfect fit for your specific pipette brand.

Filtered Pipette Tips

<h2 dir="ltr"> What Are Universal Fit Filter Tips?</h2>
 Universal fit filter tips combine two well-established features: the standardised collar geometry of universal-fit tips (3.8 mm collar for &le;10 &micro;L, 6.1 mm for &le;200 &micro;L, ~7.5 mm for &le;1,000 &micro;L) and an integrated hydrophobic PE aerosol-barrier frit inside the tip shaft. The collar geometry enables cross-brand compatibility; the PE frit physically blocks aerosol droplets and liquid from entering the pipette barrel when over-pipetting, vigorous mixing, or volatile samples are involved. They deliver contamination protection equivalent to brand-specific filter tips at a cost appropriate for labs standardising on universal consumables. Universal fit filter tips are the default contamination-control tip for any lab with a mixed Eppendorf/Gilson/Rainin fleet running PCR, RNA, or biohazardous protocols.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li data-section-id="m30as9" data-start="0" data-end="80">Sorenson Brand OneTouch Barrier Tips and Sorenson Brand Filtered Pipette Tips.</li>
<li data-section-id="xhf726" data-start="82" data-end="146">Universal fit filtered pipette tips in bulk packaging formats.</li>
<li data-section-id="nu40o7" data-start="148" data-end="206">Low retention filter pipette tips from Globe Scientific.</li>
<li data-section-id="ibpfse" data-start="208" data-end="283">X-Series filtered pipette tips for filtered liquid handling applications.</li>
<li data-section-id="1xtcja5" data-start="285" data-end="358" data-is-last-node="">5 mL and 10 mL filtered pipette tips for Eppendorf and Thermo pipettes.</li>
</ul>
<h2 dir="ltr"> How to Choose Universal Fit Filter Tips</h2>
 Filter Material: PE Frit vs Self-Sealing Barrier Standard PE frit filters (Globe Scientific, Sorenson Bioscience, Nest Scientific) are hydrophobic sintered polyethylene that blocks aerosol and liquid without absorbing sample material &mdash; the most broadly specified filter type. Self-sealing barrier tips (e.g., Thermo Scientific ART) use a swelling polymer that expands on contact with liquid to create a complete seal; they provide reliable protection but at a higher cost and from fewer suppliers. Low-Retention Universal Filter Tips Low-retention universal filter tips add a hydrophobic inner tip wall to the PE frit. Use them at &le;10 &micro;L for RNA, enzyme aliquoting, and small-volume nucleic acid work where both contamination protection and maximum volume delivery accuracy are required. Volume Range 10 &micro;L: P2&ndash;P10 range; sequencing gel loading, micro-volume PCR setup. 20 &micro;L: P20 range. 100 &micro;L: P100. 200 &micro;L: P200 &mdash; the highest-volume filter tip in most labs. 300 &micro;L: for some extended P300 pipettes. 1,000 &micro;L: P1000. 1,250 &micro;L: extended high-volume format. Extended-Length Filter Tips Extended-length universal filter tips (200 &micro;L and 1,000 &micro;L) are 20&ndash;40 mm longer than standard, enabling aerosol-protected access to the bottom of 15 mL and 50 mL conical tubes during nucleic acid elution and sample transfer steps. Packaging Universal filter tips are typically sterile-racked (96/rack &times; 10 racks/box). Sorenson EcoRack reload inserts are available for high-volume filter tip users seeking plastic waste reduction. 
<h2 dir="ltr"> Specifications Context</h2>
 Universal fit filter tips are certified DNase-free, RNase-free, human DNA-free, ATP-free, pyrogen-free, and PCR inhibitor-free per independent lot. Virgin polypropylene construction; PE frits are hydrophobic, sintered polyethylene confirmed PCR inhibitor-free. Sterile racked tips are EO-sterilised or gamma-irradiated to SAL 10⁻&sup3;&ndash;10⁻⁶. Thermo Scientific ART universal filter tips use a proprietary self-sealing barrier; Globe Scientific and Sorenson Bioscience use PE frits. Sorenson Bioscience universal filter tips in standard rack and EcoRack reload formats are stocked by MBP Inc.&nbsp; 
&nbsp;
Why settle for a "maybe" fit when you can have a perfect seal? <a href="https://mbpinc.net/contact-us" style="color: #236fa1;">Reach out to the MBP team</a> today to find the right universal solution for your lab&rsquo;s setup.

Universal Fit Filter Tips

Sorenson Brand Filtered Pipette Tips

Sorenson Brand Filtered Pipette Tips by MBP are available in multiple volumes: 10 µl (38000T), 20 µl barrier (14210T, 960/pack), 100 µl (36060T), 200 µl barrier low retention (14220T, 960/pack), 200 µl NX barrier (30550T), and 1000 µl XT barrier (34000). Ships ambient.

Types

Size

20ul Barrier Tips 960 Tips/Pack, 4800/CS

200ul Barrier Tips Low Retention 960 Tips/Pack, 4800/CS

10ul Long Reach Barrier Tips Low Retention 960 Tips/Pack, 4800/CS

200ul NX Barrier Filter Tips, Low Retention 960 Tips/Pack, 4800/CS

1000ul XT Barrier Tips, Long Reach, Sterile, 768 Tips/Pack, 3840/CS

100ul Barrier Tips, Sterile, Low Retention 960 Tips/Pack, 4800/CS

Compact Anti Static Ionizer

W3120 by Benchmark Scientific (Accuris) is a compact anti-static ionizer (115/230V, approx. 15×15×15 cm) that emits balanced positive and negative ions to neutralize static charge on analytical balance samples and containers. An optional blower enables rapid static discharge or can be switched off for powder work.

Compact Anti Static Ionizer, 230V

Compact Anti Static Ionizer, 115V

PCR Plates

<h2 data-path-to-node="3">What Are PCR Plates?</h2>
 PCR plates are single-use, thin-wall polypropylene multi-well vessels designed for the thermal cycling demands of PCR, qPCR, RT-PCR, and genotyping. The 96-well format (12 columns &times; 8 rows) is the standard for most research and clinical labs; 384-well plates serve ultra-high-throughput applications. Well volumes are 0.2 mL (standard profile) for conventional block cyclers or 0.1 mL (low profile) for fast-block instruments. The skirt &mdash; the rigid plastic border surrounding the well array &mdash; determines automation compatibility, cycler lid clearance, and plate rigidity.&nbsp;
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li data-section-id="1xmdc3x" data-start="0" data-end="87"><a href="https://mbpinc.net/consumables/pcr-consumables/pcr-plates/semi-skirted-plates">Semi-skirted PCR plates: </a>for a balance of plate rigidity and instrument compatibility.</li>
<li data-section-id="y5pq2h" data-start="89" data-end="156"><a href="https://mbpinc.net/consumables/pcr-consumables/pcr-plates/hard-shell-pcr-plates">Hard shell PCR plates: </a>designed with a reinforced plate structure.</li>
<li data-section-id="8t808z" data-start="158" data-end="243"><a href="https://mbpinc.net/consumables/pcr-consumables/pcr-plates/skirted-pcr-plates">Skirted PCR plates:</a> featuring a full peripheral skirt for enhanced handling support.</li>
<li data-section-id="1d0aj4c" data-start="245" data-end="343" data-is-last-node=""><a href="https://mbpinc.net/consumables/pcr-consumables/pcr-plates/non-skirted-pcr-plates">Non-skirted PCR plates:</a> with a compact design for applications requiring minimal plate footprint.</li>
</ul>
&nbsp;
<h2 data-path-to-node="3">How to Choose PCR Plates</h2>
 Skirt Format Fully-skirted plates have a full-height ANSI/SBS-compliant border (127.76 &times; 85.47 mm footprint) and are required for robotic liquid handlers (Hamilton STAR, Tecan EVO, PerkinElmer JANUS) and automated stackers. Semi-skirted plates have a partial skirt providing enough rigidity for multichannel pipetting while maintaining thermal cycler block compatibility across a wider range of instruments. Non-skirted plates have no border and fit virtually any cycler block, including instruments whose compression lids would be obstructed by a full skirt. Well Profile: Standard vs Low-Profile Standard-profile 0.2 mL wells are used with conventional (tall) block cyclers. Low-profile 0.1 mL wells are required for fast-block instruments, including the Applied Biosystems QuantStudio, Bio-Rad CFX96 Fast, and Roche LightCycler 480, where the reduced well depth shortens the thermal path to the sample. Colour: Clear, White, or Black Clear plates allow visual inspection of well volumes and are the default for end-point PCR. White plates increase qPCR sensitivity in bottom-read optical systems by reflecting fluorescence emission back through the detector. Black plates reduce background fluorescence in probe-based assays where cross-well optical interference is a concern. Sealing Compatibility Skirted and semi-skirted plates seal reliably with adhesive films and heat sealers; the rigid skirt supports even film application and reduces edge-well evaporation. Non-skirted plates require cap mats or adhesive seals that adhere directly to the well rim. 
<h2 data-path-to-node="3"> Specifications Context</h2>
 PCR plates are moulded from virgin, low-extractable medical-grade polypropylene; well walls are uniformly thin (typically 0.25&ndash;0.35 mm) to maximise thermal conductivity. ANSI/SBS footprint standard (127.76 &times; 85.47 mm) applies to skirted plates for instrument interoperability. Plates are certified DNase-free, RNase-free, human DNA-free, and PCR inhibitor-free per lot. Cut corners (typically at H1/A12 position) and alpha-numeric well labelling aid plate orientation.Thermo Fisher SuperPlate skirted formats are the leading references for robotic applications; semi-skirted plates from Sorenson and equivalent lines serve the broad research market.&nbsp; 
<a href="https://mbpinc.net/contact-us">Connect with the MBP team </a>today to request a quote and find the perfect PCR plate configuration for your lab's specific needs.

<h2>What Are Semi-Skirted PCR Plates?</h2>
 Semi-skirted PCR plates have a partial plastic border extending approximately half the height of a fully skirted plate, surrounding part of the well array. This partial skirt adds enough structural rigidity to support multichannel pipetting. It provides a surface for labelling, while keeping the overall plate height low enough for compatibility with most thermal cycler compression lids that a full skirt would obstruct. Semi-skirted plates represent the most common format in routine qPCR and genotyping labs, where fully automated robotic handling is not required. Semi-skirted is the default choice for most routine PCR and qPCR labs that mix manual pipetting with occasional automated steps. 
&nbsp;
<h2 data-start="476" data-end="501">What you will find: </h2>
<ul data-start="502" data-end="1108">
<li style="color: #000000;" data-section-id="47u9b8" data-start="502" data-end="589">Hard shell 384-well PCR plates &ndash; enhanced rigidity for high-throughput applications</li>
<li style="color: #000000;" data-section-id="1oohzes" data-start="590" data-end="670">Semi-skirted, 96-well PCR plates &ndash; balanced design for routine PCR workflows</li>
<li style="color: #000000;" data-section-id="1n8sxu4" data-start="671" data-end="748">Hard Shell 96-well PCR plates &ndash; improved structural support and alignment</li>
<li style="color: #000000;" data-section-id="1gxz5rn" data-start="749" data-end="830">Globe Scientific Half Skirt PCR Plates &ndash; reliable option from a trusted brand</li>
<li style="color: #000000;" data-section-id="wcryl4" data-start="831" data-end="897">PCR Plates, Semi Skirt &ndash; versatile plates for standard lab use</li>
<li style="color: #000000;" data-section-id="dlek6q" data-start="898" data-end="985">96-well Duo Material PCR plate &ndash; optimized materials for performance and durability</li>
<li style="color: #000000;" data-section-id="4vb9o1" data-start="986" data-end="1108">Semi-Skirt 96 Plate, Clear Polypropylene, Non-Sterile &ndash; clear construction for visibility and general applications</li>
</ul>
<h2> How to Choose Semi-Skirted PCR Plates</h2>
 Well Profile and Volume Low-profile 0.1 mL semi-skirted plates are the standard for qPCR on fast-block instruments, including Bio-Rad CFX96, Applied Biosystems StepOnePlus, and Roche LightCycler 480. Standard-profile 0.2 mL wells work with conventional block cyclers and accommodate larger reaction volumes for cloning or high-concentration template workflows. Colour: Clear vs White Clear semi-skirted plates suit end-point PCR and top-read qPCR systems. White semi-skirted plates increase fluorescence signal in bottom-read qPCR optical configurations. Thermo Fisher offers white semi-skirted formats for this application. Cut Corner for Orientation Semi-skirted plates typically feature a notched or cut corner at the A12 position for plate orientation &mdash; a feature originating in sequencing plate formats and now standard across most qPCR-compatible semi-skirted plates. Confirm the cut corner position against your instrument's plate alignment specification. Sealing The partial skirt of semi-skirted plates supports adhesive film sealing and is compatible with most heat sealers. The skirt also reduces edge-well evaporation compared to non-skirted plates, improving Ct uniformity across plate positions. Robotic Compatibility Semi-skirted plates provide enough grip surface for some robotic arm designs and are listed as compatible with select liquid handlers; however, for demanding robotic workflows with gripper systems or conveyor belts, fully skirted ANSI/SBS-compliant plates remain the correct specification. 
<h2> Specifications Context</h2>
 Semi-skirted 96-well plates are moulded from virgin polypropylene with uniformly thin walls (0.25&ndash;0.35 mm) for consistent thermal conductivity. The partial skirt height is approximately 50% of a full ANSI/SBS skirt height, placing the plate between non-skirted and fully skirted in both rigidity and cycler compatibility. All plates are independently certified DNase-free, RNase-free, human DNA-free, and PCR inhibitor-free per lot.&nbsp; 
&nbsp;
Let <a href="https://mbpinc.net/contact-us">the MBP team&nbsp;</a>help you choose the right plate format to match your workflow and instrumentation.

Semi-Skirted Plates

PCR Plates, Semi Skirt

NEST Scientific 96-Well Semi Skirt PCR Plates

402301 by NEST Scientific is a 96-well, 0.2 mL semi-skirted PCR plate with standard profile, A12 notch, and optically clear construction. Compatible with bottom-read fluorescence thermal cyclers and semi-skirt robotic grippers. Supplied 25 plates per pack, 100 plates per case. Clear alpha-numeric labeling for positive plate orientation on automated decks.

0.1ml 96 Well PCR Plate, Semi Skirt, Clear, A1 notch, 25/pk, 100/cs, for ABI machine (ABI Equivalent N801-0560)

0.1ml 96 Well PCR Plate, Semi Skirt, White, A1 notch, 25/pk, 100/cs

0.2ml 96 Well PCR Plate, Semi Skirt, Clear, A12 notch, 25/pk, 100/cs

0.2ml 96 Well PCR Plate, Semi Skirt, Clear, A12 notch, 25/pk, 100/cs, for ABI machine (ABI Equivalent ?????)

100 μl 96 Well PCR Plates,Semi Skirt,Roche,H12 Notch,White, 10/pk, 50/cs

<h2 data-section-id="17lohz5" data-start="0" data-end="48">What Are Externally Threaded Cryogenic Vials?</h2>
&nbsp;
Externally threaded cryogenic vials have the screw thread on the outside of the vial neck, with a cap that covers the entire top portion of the vial when closed. Manufactured from cryogenic-grade virgin polypropylene, these vials are designed to withstand temperatures from &minus;196&deg;C to +121&deg;C and are commonly used for long-term storage of cell lines, serum, blood, DNA, RNA, bacterial cultures, and other biological samples. Available in volumes ranging from 1.2 mL to 5 mL, they are offered in both self-standing and round-bottom formats. Unlike internally threaded vials, external-thread designs use an integrated sealing system rather than a separate O-ring, helping reduce handling issues. For automated decapping systems, high-throughput biobanking, and SBS-format robotic workflows, externally threaded vials are the preferred format.
&nbsp;
<h2 dir="ltr">MBP Offers:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
2D Barcoded Cryogenic Vials for automated tracking
</li>
<li dir="ltr" aria-level="1">
SBS Format Cryo Racks for robotic integration
</li>
<li dir="ltr" aria-level="1">
3D Barcoded Storage Vials for digital inventory
</li>
<li dir="ltr" aria-level="1">
Color-coded Cap Inserts for rapid identification
</li>
<li dir="ltr" aria-level="1">
Self-standing Star-foot Cryo Vials
</li>
<li dir="ltr" aria-level="1">
Silicone O-ring Sealed Leak-proof Containers
</li>
<li dir="ltr" aria-level="1">
Gamma-sterilized Aseptic Storage Tubes
</li>
</ul>
&nbsp;
<h2 data-section-id="px7lzo" data-start="891" data-end="943">How to Choose Externally Threaded Cryogenic Vials</h2>
&nbsp;
Volume
The 2 mL externally threaded vial is the industry standard for cell banking, serum aliquots, and general biospecimen storage. It fits standard 81-well cryo boxes and is suitable for most laboratory applications. Smaller 1.2&ndash;1.5 mL vials are ideal for high-density storage where space efficiency is important, while larger 3&ndash;5 mL formats are commonly used for tissue samples, bacterial glycerol stocks, and larger-volume specimens.
Base Style: Self-Standing vs. Round Bottom
Self-standing vials feature a star-foot or conical base that allows them to stand upright on laboratory benches without requiring a rack, reducing the risk of spills during handling. Round-bottom vials require rack support but often offer broader compatibility with different storage racks and cryo box configurations.
Barcoding: Plain vs. 2D Barcoded
Standard externally threaded vials include a writable surface for manual labeling and are suitable for small to medium-sized sample collections. For large biobanks and automated sample management systems, 2D barcoded vials provide Data Matrix codes that can be scanned directly into Laboratory Information Management Systems (LIMS), improving traceability and reducing manual data entry errors.
Sterility and Purity
Cryogenic vials intended for cell culture, molecular biology, and clinical research should be gamma sterilized and certified RNase-free, DNase-free, non-pyrogenic, and endotoxin-free. These certifications help protect sample integrity and reduce contamination risks during long-term storage.
&nbsp;
<h2 data-section-id="1jl751w" data-start="3061" data-end="3086">Specifications Context</h2>
&nbsp;
Externally threaded polypropylene cryogenic vials are designed for vapor-phase liquid nitrogen storage and ultra-low temperature freezers. The standard outer diameter of a 2 mL vial is approximately 12.5 mm, making it compatible with most 81-well cryo box formats. Modern external-thread designs use integrated thermoplastic elastomer sealing systems that eliminate the need for separate O-rings, reducing the possibility of seal misalignment or loss during routine handling. As of 2026, externally threaded 2 mL vials with SBS-compatible footprints and 2D barcodes are widely used in large-scale biobanking and sample repository applications.
Your research is priceless. Your storage should be equally reliable. <a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;">Connect with Molecular Biology Products Inc.</a> for a personalized quote.

Externally Threaded Cryogenic Vials

Non-Barcoded CryoKING Cryogenic vials, External Threaded

CryoKING Cryogenic Vials are made of medical-grade polypropylene and feature assembled external-thread caps. Gamma radiation sterilized, these cryovials include a white writing area and clear graduations for convenient sample tracking and identification.

Cryoking 0.5ml clear polypropylene sterile cryovials with external thread and red caps assembled.  cryovials have writing patch and marked graduations. 25 cryovials/bag, 20 bags/pack, 2 packs/case, price/case

cryoking 0.5ml clear polypropylene sterile cryovials with external thread and green caps assembled.  cryovials have writing patch and marked graduations.  25 cryovials/bag, 20 bags/pack, 2 packs/case, price/case

cryoking 0.5ml clear polypropylene sterile cryovials with external thread and blue caps assembled.  cryovials have writing patch and marked graduations.   25 cryovials/bag, 20 bags/pack, 2 packs/case, price/case

0.5ml vial, yellow cap , no barcode, pp, no o-ring;rnase & dnase free, foreign dna free, non-pyogenic, sterile,working temperature: -196--+121degree,25 pieces/bag, 20 bags/pack, 2 packs/case

cryoking 0.5ml clear polypropylene sterile cryovials with external thread and purple caps assembled.  cryovials have writing patch and marked graduations. 25 cryovials/bag, 20 bags/pack, 2 packs/case, price/case

cryoking 0.5ml clear polypropylene sterile cryovials with external thread and white caps assembled. cryovials have writing patch and marked graduations. 25 cryovials/bag, 20 bags/pack, 2 packs/case, price/case

cryoking 1.0ml clear polypropylene sterile cryovials with external thread and red caps assembled.  cryovials have writing patch and marked graduations.  25 cryovials/bag, 20 bags/pack, 2 packs/case

Cryoking 1.0ml clear polypropylene sterile cryovials with external thread and green caps assembled.  cryovials have writing patch and marked graduations.25 cryovials/bag, 20 bags/pack, 2 packs/case

Cryoking 1.0ml clear polypropylene sterile cryovials with external thread and blue caps assembled.  cryovials have writing patch and marked graduations.  25 cryovials/bag, 20 bags/pack, 2 packs/case

Cryoking 1.5ml clear polypropylene sterile cryovials with external thread and red caps assembled.  cryovials have writing patch and marked graduations.   25 cryovials/bag, 20 bags/pack, 2 packs/case

Cryoking 1.5ml clear polypropylene sterile cryovials with external thread and green caps assembled.  cryovials have writing patch and marked graduations. 25 cryovials/bag, 20 bags/pack, 2 packs/case

Cryoking 1.5ml clear polypropylene sterile cryovials with external thread and blue caps assembled.  cryovials have writing patch and marked graduations.   25 cryovials/bag, 20 bags/pack, 2 packs/case

Cryoking 1.5ml clear polypropylene sterile cryovials with external thread and yellow caps assembled.  cryovials have writing patch and marked graduations.  25 cryovials/bag, 20 bags/pack, 2 packs/case

Cryoking 1.5ml clear polypropylene sterile cryovials with external thread and purple caps assembled.  cryovials have writing patch and marked graduations.  25 cryovials/bag, 20 bags/pack, 2 packs/case

Cryoking 1.5ml clear polypropylene sterile cryovials with external thread and white caps assembled.  cryovials have writing patch and marked graduations.  25 cryovials/bag, 20 bags/pack, 2 packs/case

Cryoking 5ml cryogenic vials,  external thread, no barcode, self-standing,pp; autoclavable;red caps; gamma radiation steriled, dnase & rnase free, endotoxin free, foreign dna free, 25 sets/bag, 40 bags/case

Cryoking 5ml cryogenic vials,  external thread, no barcode, self-standing,pp; autoclavable;blue caps; gamma radiation steriled, dnase & rnase free, endotoxin free, foreign dna free, 25 sets/bag, 40 bags/case

Cryoking 5ml cryogenic vials,  external thread, no barcode, self-standing,pp; autoclavable;white caps; gamma radiation steriled, dnase & rnase free, endotoxin free, foreign dna free, 25 sets/bag, 40 bags/case

Cryoking 2ml cryogenic vials,  external threads , no barcode, self-standing,pp; autoclavable;red caps; gamma radiation steriled, dnase & rnase free, endotoxin free, foreign dna free, 25 sets/bag, 40 bags/case

Cryoking 2ml cryogenic vials,  external threads , no barcode, self-standing,pp; autoclavable;green caps; gamma radiation steriled, dnase & rnase free, endotoxin free, foreign dna free, 25 sets/bag, 40 bags/case

Cryoking 2ml cryogenic vials,  external threads , no barcode, self-standing,pp; autoclavable;white caps; gamma radiation steriled, dnase & rnase free, endotoxin free, foreign dna free, 25 sets/bag, 40 bags/case

Universal Centrifuge Accessories

<h2>What Are Universal Centrifuge Accessories?</h2>
&nbsp;
Universal centrifuge accessories are the interchangeable components that determine the range of applications a universal centrifuge can perform. These include swing-out rotor buckets for blood tubes, conical tubes, microplates, and large bottles; fixed-angle rotors for high-speed pelleting; hematocrit and cytospin rotors; tube adapters; and aerosol-tight bio-containment lids. Selecting the appropriate accessories allows a single centrifuge to support multiple laboratory workflows efficiently and safely.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Tube adapters and inserts for compatibility with multi-volume samples&nbsp;
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Fixed-angle and swing-out rotors for varied centrifugation applications
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Lids and sealed buckets for safe and reliable operations
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
PCR adapters and microplate carriers for high-throughput workflows
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Centrifuge tubes, holders, and supporting aids for efficient and complete setups
</li>
</ul>
&nbsp;
<h2>How to Choose Universal Centrifuge Accessories</h2>
&nbsp;
Swing-Out Bucket Selection by Application
Choose swing-out buckets according to the sample formats used in your laboratory. Blood tube buckets support routine clinical applications, conical tube buckets are suitable for cell culture and molecular biology, microplate carriers enable high-throughput workflows, and large-bottle carriers accommodate large-volume sample processing.
Fixed-Angle Rotors
Fixed-angle rotors provide higher centrifugal forces for microtube, PCR tube, and small-volume sample processing. Ensure that both the rotor and centrifuge motor specifications support the required operating speeds and sample formats.
Cytospin Clip Rotors
Cytospin rotors are designed for preparing microscope slides from low-cellularity samples such as body fluids. Verify compatibility with the required funnel sizes and use bio-containment features when processing potentially infectious materials.
Bio-Containment Lids
Aerosol-tight lids help contain biological samples during centrifugation and support safe laboratory practices. Regular inspection of sealing components and O-rings ensures reliable containment and long-term performance.
Reducing Adapter Inserts
Adapter inserts allow smaller tubes to fit securely within larger bucket positions. Using properly matched adapters improves balance, prevents movement during operation, and helps maintain consistent centrifugation results.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Modern universal centrifuge systems support interchangeable accessory configurations that enable rapid transitions between clinical, research, cell culture, and cytology workflows. Swing-out buckets, fixed-angle rotors, and microplate carriers provide flexibility while maintaining compatibility with a broad range of vessel formats.
Routine inspection and maintenance of accessories, including adapters, lids, and sealing components, help ensure safe operation and extend equipment lifespan. Advances in bio-containment systems and modular rotor designs continue to improve laboratory efficiency and versatility.
Time to upgrade your universal centrifuge accessories. <a href="https://mbpinc.net/contact-us">Contact the expert team </a>of Molecular Biology Products Inc. (MBP) and the find perfect match today.

BucketBuddy™ Magnetic Basket and Tube Rack for Laboratory Centrifuges, Each

Z326-BKR BucketBuddy&trade; by Benchmark Scientific is a magnetic basket and tube rack that attaches directly to Hermle centrifuge buckets and inserts (up to 750 ml) via a built-in magnet. It holds capped tubes from 1.5 ml to 50 ml without adapters, keeping tubes organised at the centrifuge during loading and unloading. Sold individually. Order using catalog number Z326-BKR at <a href="https://www.mbpinc.net/quickorder">mbpinc.net/quickorder</a> or contact <a href="mailto:customerservice@mbpinc.net">customerservice@mbpinc.net</a>.

United States

Texas

mbpinc