Brands

Pipette Tips

<h2 dir="ltr">What Are LTS-Compatible Pipette Tips?</h2>
 LTS (LiteTouch System) pipette tips use a cylindrical collar that mates with the cylindrical shaft of Rainin LTS pipettes, as opposed to the conical taper used on standard universal-fit tips. The cylindrical-to-cylindrical interface reduces the insertion force needed to seat the tip, lowering the repetitive-strain load on the hand and wrist during high-throughput pipetting &mdash; the primary ergonomic benefit Rainin's LiteTouch design addresses.&nbsp; LTS tips are required for Rainin LTS pipettes &mdash; no other tip format seats correctly. Third-party LTS-compatible tips offer equivalent performance at a lower cost than OEM.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
LTS-compatible sterile filter pipette tips
</li>
<li dir="ltr" aria-level="1">
Low-retention LTS pipette tips for improved recovery
</li>
<li dir="ltr" aria-level="1">
RNase/DNase-free LTS-compatible tips
</li>
<li dir="ltr" aria-level="1">
Racked LTS pipette tips for organized workflows
</li>
<li dir="ltr" aria-level="1">
Bulk pack LTS-compatible tips for high-throughput labs
</li>
<li dir="ltr" aria-level="1">
Extended length LTS pipette tips
</li>
<li dir="ltr" aria-level="1">
PCR-grade LTS filter tips
</li>
<li dir="ltr" aria-level="1">
Wide bore LTS tips for viscous samples
</li>
<li dir="ltr" aria-level="1">
Conductive LTS tips for automation systems
</li>
</ul>
<h2 dir="ltr"> How to Choose LTS-Compatible Tips</h2>
 Confirm Your Pipette Has LTS Not all Rainin pipettes use LTS. Rainin Classic (original PIPET-LITE) and older Rainin models use standard conical shafts and require universal-fit tips. LTS is found on Rainin Pipet-Lite XLS+, Pipet-Lite M, and multichannel L8 and L12 LTS models. Look for 'LTS' in the model name on the pipette barrel before ordering LTS-specific tips. Filtered vs Non-Filtered Non-filtered LTS tips are appropriate for buffer, media, and reagent dispensing. Filtered LTS tips &mdash; with an aerosol-barrier element &mdash; are required for PCR, RNA, and contamination-sensitive work. See the dedicated [LTS Compatible Filter Tips](mbpinc.net/consumables/liquid-handling-products/filtered-pipette-tips/lts-compatible-filter-tips [confirmed]) page for filtered LTS options. Volume Range LTS tips span approximately 20 &micro;L through 5,000 &micro;L across single-channel and multichannel pipette ranges. Common volumes: 20 &micro;L (LTS SL L10/L20), 200 &micro;L (LTS SL L200, L300), 1,000 &micro;L (LTS SL L1000), and 5,000 &micro;L macro tips for large-volume LTS pipettors. OEM Rainin vs Third-Party Compatible Rainin OEM LTS tips are manufactured to the tightest dimensional specification for LTS instruments. Third-party LTS-compatible tips are precision-moulded to LTS cylindrical geometry and certified DNase/RNase-free; they provide equivalent performance in routine applications and are typically 20&ndash;40% lower in cost than Rainin OEM tips. For critical applications (clinical diagnostics, cGMP workflows), confirm compatibility with your quality system before switching from OEM. Packaging LTS tips are available in hinged racks (10 racks &times; 96 tips = 960 tips/box) and refill wafer inserts for compatible rack bases. Sterile and non-sterile options are available across the range. 
<h2 dir="ltr"> Specifications Context</h2>
 LTS-compatible tips are manufactured from virgin polypropylene; some formats use hydrophobic low-retention PP for reduced liquid adhesion. LTS-compatible tips use hydrophobic resin technology for low retention and are certified RNase/DNase/DNA/PCR inhibitor-free. LTS tips are available from multiple third-party suppliers at 20&ndash;40% lower cost than Rainin OEM, with equivalent documented performance.&nbsp; 
Low force at every touchpoint&mdash;built to seat effortlessly, seal instantly, and keep every microliter exactly where it belongs. <a href="https://mbpinc.net/contact-us">Contact the MBP team </a>and get a tailored quote today!

LTS Compatible Pipette Tips

20µL LTS compatible tip, racked, sterile

200µL LTS compatible tip, racked, sterile

1000µL LTS compatible tip, racked, sterile

Sorenson LTS compatible tips, Racked

&lt;p&gt;The new Sorenson LTS Compatible Tips are ergonomically designed to reduce discomfort and optimized to work with Rainin LiteTouch&amp;trade; pipettors, all with the quality you have come to expect from Sorenson.&lt;/p&gt;

20µL LTS compatible tip, racked, 4,800/Cs

200µL LTS compatible tip, racked, 4,800/Cs

1000µL LTS compatible tip, racked, 3,840/Cs

20µL LTS compatible tip, racked, sterile, 4,800/Cs

200µL LTS compatible tip, racked, sterile, 4,800/Cs

1000µL LTS compatible tip, racked, sterile, 3,840/Cs

Serological Pipettes

<h2 dir="ltr"> What Are Serological Pipettes?</h2>
 Serological pipettes are calibrated, graduated, sterile polystyrene disposable pipettes used with a motorised pipette controller to transfer measured volumes of liquid in the 1&ndash;100 mL range. They are the primary tool for cell culture media transfer, buffer preparation, reagent dispensing in volumes above 1 mL, and serial dilutions requiring volumetric accuracy in the millilitre range. They differ from aspirating pipettes &mdash; which have no graduations and are used only for vacuum-assisted waste removal &mdash; and from microcentrifuge tubes, which are not dispensing instruments. Serological pipettes are the correct format for any measured liquid transfer &ge;1 mL in cell culture or reagent preparation; pair them with a motorised pipette controller for safe, ergonomic operation. 
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">1 mL to 50 mL Serological Pipettes &ndash; Standard range for routine and high-volume liquid transfer</li>
<li dir="ltr" role="presentation">Glass Serological Pipettes &ndash; Reusable options for solvent resistance and durability</li>
<li dir="ltr" role="presentation">Sterile Serological Pipettes &ndash; Gamma-sterilized for aseptic laboratory use</li>
<li dir="ltr" role="presentation">Non-Sterile Serological Pipettes &ndash; Cost-effective option for general applications</li>
<li dir="ltr" role="presentation">Graduated Serological Pipettes &ndash; For accurate volume measurement and dispensing </li>
</ul>
&nbsp;
<h2>How to Choose Serological Pipettes</h2>
 Volume: Standard Sizes and ISO 7550 Colour Coding ISO 7550 assigns a specific colour code to each serological pipette volume: 1 mL = red; 2 mL = yellow; 5 mL = blue; 10 mL = orange; 25 mL = green; 50 mL = purple (pink/violet depending on supplier). Colour coding allows quick visual volume identification when multiple sizes are in use simultaneously in a BSC. Packaging: Individual Wrap vs Bulk Individually wrapped sterile pipettes are required for cell culture, molecular biology, and aseptic technique. Plastic/plastic peel-open packaging eliminates paper particulate from paper/plastic wrappers &mdash; important in sensitive cell culture applications and for RNA work. Bulk-packed (canister or bag) formats are cost-effective for non-sterile applications such as buffer preparation and reagent dispensing in fume hoods. Construction: 1-Piece vs 3-Piece 1 mL, 2 mL, and 5 mL serological pipettes are typically one-piece moulded polystyrene constructions. 10 mL, 25 mL, and 50 mL pipettes use 3-piece ultrasonically welded construction (Globe Scientific) for the body-to-cone and body-to-cap joints &mdash; essential for the structural integrity of larger formats under aspiration vacuum. Tip and Graduation Features Negative graduations (markings above the nominal maximum) allow volumes slightly above nominal to be read. Fine-point tips with slow drip-off improve pipetting accuracy during cell culture media transfers. Some brands offer Wobble-not-style pipettes with reduced barrel flex for easier single-hand operation. Filter Plug Material Cotton filter plugs are standard; synthetic plugs (polyethylene or polypropylene) are preferred when processing organic solvents or any media that might wick through a cotton plug.
<h2 dir="ltr"> Compare Serological Pipette Volumes </h2>
&nbsp;
<ul>
<li>1 mL &ndash; Red ISO 7550 colour, 1-piece construction, 0.01 mL graduations; used for small-volume media transfer.</li>
<li>2 mL &ndash; Yellow ISO 7550 colour, 1-piece construction, 0.1 mL graduations; used for buffer preparation.</li>
<li>5 mL &ndash; Blue ISO 7550 colour, 1-piece construction, 0.1 mL graduations; used for media preparation and dilutions.</li>
<li>10 mL &ndash; Orange ISO 7550 colour, 3-piece construction, 0.1 mL graduations; used for flask media changes.</li>
<li>25 mL &ndash; Green ISO 7550 colour, 3-piece construction, 0.5 mL graduations; used for bulk media dispensing.</li>
<li>50 mL &ndash; Purple ISO 7550 colour, 3-piece construction, 1.0 mL graduations; used for large flask media changes.</li>
</ul>
<h2 dir="ltr"> Specifications Context</h2>
 Serological pipettes are manufactured from optically clear virgin polystyrene in Class 100,000 cleanroom conditions. Sterility: individually wrapped pipettes are EO-sterilised to SAL 10⁻⁶; non-pyrogenic, non-cytotoxic, DNase-free, and RNase-free per lot. ISO 7550 defines colour coding for serological pipettes; many US suppliers follow this standard, though it is not universally mandated. Calibrated to deliver (TD) with blow-out (marked with a double band or 'TD' marking) &mdash; all liquid must be expelled from the tip for accurate delivery. Globe Scientific, Nest Scientific, and Falcon remain the dominant serological pipette brands in North American cell culture labs.&nbsp; 
&nbsp;
Improve consistency and reduce handling variation with reliable serological pipette solutions. Request a quote from <a href="https://mbpinc.net/contact-us">the expert team at Molecular Biology Products Inc. (MBP).</a>

MBP Brand - Serological Pipettes

SP000 by MBP: MBP Brand sterile serological pipettes — individually wrapped, EO-sterilized SAL 10⁻⁶, non-pyrogenic, DNase/RNase-free polystyrene. Available in 5 mL (200/pack), 10 mL (200/pack), 25 mL (100/pack), and 50 mL (75/pack).

Manufacturer

5ml Serological Pipets, MBP, 200/Pk, 1200/Case

10ml Serological Pipets, MBP, 200/Pk, 1200/Cs

25ML Serological Pipets, MBP, 100/Pk, 600/Cs

50ML Serological Pipets, MBP, 75/Pk, 450/Case

Magnetic Stirrers

<h2>What Are Laboratory Magnetic Stirrers?</h2>
&nbsp;
A laboratory magnetic stirrer uses a rotating permanent magnet or electromagnet installed below a flat work surface to create a spinning magnetic field above the plate. A PTFE (polytetrafluoroethylene)-coated magnetic stir bar placed inside a vessel couples to this field and rotates, mixing the liquid from within. Because there is no physical contact between the stirrer and the contents of the vessel, the technique is contamination-free, amenable to closed-vessel operation, and compatible with corrosive, biological, and hazardous reagents. Magnetic stirrers are used without heating for buffer and media preparation, titrations, pH measurement, enzyme inhibition assays, hybridization reactions, and dissolution studies. Multi-position magnetic stirrers drive multiple stir bars simultaneously on a single unit, enabling parallel sample processing in analytical laboratories, pharmaceutical quality control, and environmental testing workflows. Use a standalone magnetic stirrer (no heat) when you need uniform mixing without thermal input: titrations, pH measurement, cold-room work, and mixing heat-labile reagents.
&nbsp;
<h2 dir="ltr">What You Will Find:&nbsp;</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Digital hotplate magnetic stirrers offer precise temperature control up to 550&deg;C and dual LED displays, making it easy to monitor both heat and speed at a glance.
</li>
<li dir="ltr" aria-level="1">
High-capacity magnetic stirrers are designed to handle larger volumes with ease, providing the powerful torque needed for consistent mixing in bigger batches.
</li>
<li dir="ltr" aria-level="1">
Compact and ultra-flat stirrers provide a space-saving solution for crowded benchtops, featuring low-profile designs and PET surfaces that are tough and easy to clean.
</li>
<li dir="ltr" aria-level="1">
Multi-channel magnetic stirrers allow you to stir up to 10 samples simultaneously with uniform speed, perfect for boosting your lab&rsquo;s productivity.
</li>
<li dir="ltr" aria-level="1">
Analog and classic stirrers bring reliable, straightforward performance to your workstation with durable stainless steel or ceramic-coated plates that resist wear and tear.
</li>
<li dir="ltr" aria-level="1">
Auto-reverse and timer functions give you professional-level control over your mixing cycles, ensuring your samples get exactly the treatment they need.
</li>
</ul>
&nbsp;
<h2>How to Choose a Magnetic Stirrer</h2>
&nbsp;
Single-position vs. multi-position
Single-position stirrers are the most common format for benchtop chemistry and biology work, accommodating one vessel at a time. Multi-position magnetic stirrers (2, 6, 10, or 15 positions on a single plate) are used for high-throughput applications such as dissolution testing, parallel reaction screening, and environmental sample preparation, where identical mixing conditions across multiple vessels are required simultaneously.
Digital vs. analog control
Analog (dial-control) magnetic stirrers are reliable, low-maintenance, and appropriate when mixing speed precision is not critical. Digital stirrers display speed in rpm, maintain the setpoint with a feedback motor controller, and provide reproducible speed settings session to session, which is important for protocols requiring a specific agitation rate (e.g., OD600 turbidity assays, viscosity studies). Some digital models log rpm and run-time data via USB.
Speed range and stir bar compatibility
Most magnetic stirrers cover 100 to 1500 rpm. Microplate and high-throughput models reach up to 1500 rpm with small stir bars. For large-volume vessels (3 L and above), a lower maximum speed (300 to 500 rpm) with a large stir bar (60 mm to 80 mm) is more appropriate than attempting high speed with an undersized bar. PTFE stir bars are available in lengths from 3 mm (for microcentrifuge tubes) to 80 mm (for large vessels); octagonal, cross-shaped, and egg-shaped bars improve mixing in round-bottom flasks compared to standard cylindrical bars.
Plate size and chemical resistance
Plate dimensions determine the largest vessel the stirrer can stably support. A 135 mm x 135 mm plate accommodates a 1 L beaker; larger plates (200 mm x 200 mm and above) are needed for 3 L to 5 L vessels. PTFE-coated plates or ceramic tops offer the highest chemical resistance for work with acids, bases, and organic solvents. Stainless steel tops provide stronger magnetic coupling for viscous materials.
Cold-room and CO2 incubator use
Magnetic stirrers designed for cold-room use (2 degrees C to 8 degrees C) or for operation inside a CO2 incubator use sealed, humidity-resistant motor housings and are rated for continuous operation under those environmental conditions. Standard benchtop stirrers are not rated for cold-room or high-humidity incubator use; using them in these environments shortens motor life.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Motor type affects long-term reliability: brushless DC motors require no maintenance and last longer than brushed motors, which need periodic brush replacement in continuous-use settings. PTFE stir bars should be replaced when the PTFE coating chips or shows wear; bare metal exposure contaminates the solution and interferes with magnetic coupling. For regulated applications (pharmaceutical QC, ISO 17025 labs), specify a stirrer with a digital speed display and speed accuracy of plus or minus 1 rpm to support protocol documentation requirements. Related equipment:&nbsp;<a href="https://mbpinc.net/equipments/temperature-control-equipment/hotplate-and-stirrers"></a>
&nbsp;
Ready to find the perfect spin for your lab? Browse our magnetic stirrer collection and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a quote today.

Analog Magnetic Stirrers (7.5 x 7.5″) Series

H4000-S by Benchmark Scientific is an analog magnetic stirrer with a 7.1 &times; 7.1 in chemical-resistant ceramic surface and a 60&ndash;1,500 rpm speed range, housed in a compact 8.5 &times; 10 in footprint. A stirrer-only unit with LED activation indicators and analog dial control, it operates from +4 &deg;C to +65 &deg;C &mdash; suitable for benchtop, cold-room, and bio-hood use. Ideal for buffer preparation, titrations, and dissolution workflows where heating is not required.

Temp. Range

Speed Range

Platform Dimensions

Operating Temp. Range

Max. Stirring Capacity

Dimensions

Weight

Electrical

Warranty

Manufacture

Magnetic Stirrer, 7.5"x7.5", 115V

Hotplate Magnetic Stirrer, 7.5"x7.5", 115V

Hotplate Magnetic Stirrer, 7.5"x7.5", 230V

Hotplate, 7.5"x7.5", 115V

Hotplate, 7.5"x7.5", 230V

Magnetic Stirrer, 7.5"x7.5", 230V

Incubators Accessories

Extra Shelf, stainless steel, for H2505-40

Extra Shelf, stainless steel, for H2505-70

Extra Shelf, stainless steel, for H2505-130

Additional shelf for 45 liter incubators, 1 each

Additional shelf for 180 liter incubators, 1 each

Stacking kit for 180 liter incubator (height of top display approximately 135cm)

IncuView Integrated Microscope Shelf, 45L (For H3565-45 Only)

IncuView Integrated Microscope Shelf, 180L (For H3565-180, 180HD and 180HDO2 Only)

H3565-180-LCI by Benchmark Scientific is the IncuView&trade; LCI integrated microscope shelf for SureTherm&trade; 180L CO2 incubators (H3565-180, 180HD, and 180HDO2 only). It provides real-time internal live-cell imaging with a built-in microscope and external display, plus WiFi connectivity for remote viewing on any phone, tablet, or computer. Patent-pending IncuView technology eliminates culture disruption from external microscope transfers.

Overhead Stirrers Accessories

<h2>What Are Overhead Stirrer Accessories?</h2>
&nbsp;
Overhead stirrer accessories are modular components that attach to an overhead stirrer motor unit to adapt it for specific applications, vessel formats, and chemical conditions. The core accessories are impellers (the mixing head), drive shafts (which connect the motor to the impeller), chuck or collet adapters (which secure the shaft in the motor's output), and support stands with clamps or crossbar assemblies that position the motor above the vessel at the correct height. Additional accessories include vessel holders and clamp stands for securing round-bottom or Erlenmeyer flasks during mixing, PTFE sleeves for shaft sealing in closed-vessel applications, and digital speed display controllers that retrofit onto analog motor units. Because overhead stirrer motor chucks accept shafts within a defined diameter range (commonly 6 mm, 8 mm, 10 mm, or 12 mm), confirm shaft diameter compatibility with the motor before ordering any impeller-and-shaft combination. Before ordering any accessory, confirm three things: motor chuck bore diameter, required shaft length for your vessel depth, and whether the impeller geometry matches the flow regime your application needs.
&nbsp;
<h2>What You Will Find:</h2>
&nbsp;
<ul>
<li>Stainless steel and PTFE (Teflon&reg;) propellers compatible with overhead stirrers for a variety of mixing applications.</li>
<li>One-line propellers designed for efficient agitation in low- to medium-viscosity liquids.</li>
<li>Paddle propellers with flat holes for enhanced fluid circulation and blending performance.</li>
<li>Centrifugal impellers that promote radial flow and effective mixing of liquid samples.</li>
<li>Four-arm propellers available in stainless steel or PTFE for versatile stirring across diverse laboratory workflows.</li>
</ul>
&nbsp;
<h2>How to Choose Overhead Stirrer Accessories</h2>
&nbsp;
Impeller geometry
Impeller type determines mixing regime and is the primary accessory selection decision. Propeller impellers (two- or three-blade marine propeller) generate axial flow, drawing fluid from above and directing it downward, suited for general liquid blending, cell suspension, and low-viscosity mixing. Paddle and anchor impellers sweep tangentially near the vessel wall, appropriate for high-viscosity materials that resist axial flow. Dispersing disc impellers (flat disc with serrated edge or teeth) generate radial high-shear flow for emulsification, pigment dispersion, and fine particle suspension. Ribbon impellers are used for highly viscous, thickening batches where conventional impellers fail to move material from the vessel walls.
Shaft length and diameter
The shaft length must extend from the motor chuck to the correct immersion depth in the vessel. Standard lengths range from 200 mm to 600 mm; longer shafts are available for deep vessels or pilot-scale bioreactors. Shaft diameter must fit within the motor's chuck bore (confirm before ordering). Thicker shafts (10 mm to 12 mm) are more rigid and reduce wobble at high speed; thin shafts (6 mm) suit small-volume vessels and lower-torque motors.
Material: stainless steel vs. PTFE
Stainless steel (316L is preferred for chemical resistance over 304) is the standard for shafts and impellers in aqueous buffers, culture media, alcohols, and mild organic solvents. PTFE shafts and impellers are required for corrosive acids, bases (concentrated NaOH, HCl, HF), halogenated solvents, and any application where metal ion contamination of the sample must be avoided. Stainless steel and PTFE impellers are not interchangeable from a torque-transfer standpoint; PTFE is softer and suitable for lower-torque applications.
Support stands and clamps.
Support stands must be rigid enough to prevent shaft wobble at maximum operating speed. Confirm that the stand's vertical travel range accommodates the vessel height plus the motor unit. Crossbar clamp assemblies allow the motor unit to be raised and lowered without removing the shaft from the vessel. Heavy-duty stands with a wide base footprint are recommended for motors above 40 Ncm and for operation above 500 rpm.
Chuck and collet adapters
Motors accept shafts with a specific bore range. Collet adapters reduce or increase the effective chuck bore to fit a different shaft diameter. Confirm the motor's chuck diameter (manufacturer-specific) and the shaft outer diameter before ordering a collet or chuck adapter; a mismatched fit can cause shaft slippage during mixing.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Impeller diameter should be 30 to 50% of the vessel inner diameter for most mixing regimes. A blade diameter that is too small leaves dead zones at the vessel wall; too large generates excessive shear and can damage shear-sensitive samples. For autoclave-compatible setups, confirm that the shaft, impeller, and any sealing sleeve are rated for 121 degrees C steam sterilization. Shaft straightness should be verified at the stated operating speed; a bent or unbalanced shaft generates vibration that compounds with any sample viscosity increase to stress the motor bearings.&nbsp;
&nbsp;
Looking for the right propeller for your process? Explore our overhead stirrer accessories and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a quote today.

Overhead Stirrer Accessories

Optional propeller, Teflon centrifugal impeller

IPS2050-P-T2 by Benchmark Scientific is a PTFE-coated centrifugal impeller measuring 350 mm long with an 85 mm open diameter and a 6 mm shaft, designed for mid-to-high-speed mixing on the Benchmark OS-20L and OS-40L overhead stirrers. The centrifugal open-blade disc geometry is optimised for small-mouth round flasks and corrosive solvent applications where a paddle propeller cannot enter the flask neck and metal-free fluid contact is required.

Length

Diameter

Shaft Diameter

Material

H3565-45-LCI by Benchmark Scientific is the IncuView&trade; LCI integrated microscope shelf for the SureTherm&trade; 45L CO2 incubator (H3565-45 only). It enables real-time live-cell imaging inside the incubator via a built-in camera and external display, with WiFi connectivity for remote monitoring from a phone, tablet, or computer. Patent-pending technology eliminates culture disruption from benchtop microscope transfers.

Automated Purification Systems Accessories

<h2>What Are Automated Purification System Accessories?</h2>
&nbsp;
Automated purification system accessories include consumables and support components used with automated nucleic acid purification platforms. Common accessories include tip combs, magnetic tip combs, deep-well plates, elution plates, reagent vessels, sample racks, and system control devices. These components support sample preparation, reagent handling, magnetic bead-based purification workflows, and routine instrument operation. Choose Automated Purification System Accessories to support efficient magnetic bead-based purification, minimize workflow interruptions, and maintain reproducible results.
&nbsp;
<h2>What You Will Find:</h2>
&nbsp;
<ul data-start="25" data-end="537" data-is-last-node="" data-is-only-node="">
<li data-section-id="q24m79" data-start="25" data-end="130">Tip combs and magnetic tip combs for automated magnetic bead-based nucleic acid purification workflows.</li>
<li data-section-id="5lldu5" data-start="131" data-end="229">Deep-well and elution plates designed for sample processing, washing, and nucleic acid recovery.</li>
<li data-section-id="by507b" data-start="230" data-end="325">Reagent vessels for automated handling of buffers, wash solutions, and purification reagents.</li>
<li data-section-id="u7msh5" data-start="326" data-end="420">Sample racks and support components for organized workflow setup and consumable positioning.</li>
<li data-section-id="dj84rx" data-start="421" data-end="537" data-is-last-node="">Platform-specific accessories and control devices that support routine operation of IsoPure&trade; purification systems.</li>
</ul>
&nbsp;
<h2>How to Choose Accessories for Automated Purification Systems</h2>
&nbsp;
Tip combs and magnetic tip combs
Tip combs and magnetic tip combs are used during automated magnetic bead handling and nucleic acid purification workflows. Select accessories designed for the specific purification platform to ensure proper fit, alignment, and operation.
Deep-well and elution plates
Deep-well plates are used for sample processing and reagent handling, while elution plates are used to collect purified nucleic acids following extraction. Confirm plate format and compatibility with the instrument and workflow requirements before ordering.
Reagent vessels and sample racks
Reagent vessels hold buffers, wash solutions, and other workflow reagents required during automated purification procedures. Sample racks provide organized positioning of vessels and consumables to support efficient workflow setup and operation.
System accessories
Additional accessories, including preconfigured control tablets and demonstration kits, support instrument operation, training, workflow development, and system setup activities.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Automated purification workflows depend on the correct combination of consumables and instrument accessories. Tip combs, plates, reagent vessels, and racks should be selected according to the instrument model and workflow format to ensure reliable sample handling and purification performance. Routine replacement of consumable components helps maintain workflow consistency and minimizes the risk of cross-contamination.
&nbsp;
To discuss product availability or receive guidance on accessory selection, <a href="https://mbpinc.net/contact-us">contact the MBP team.</a>

Automated Purification System Accessories

Android tablet preloaded with IsoPure™ Mini app

AP1016-TAB by Benchmark Scientific is an Android tablet preloaded with the IsoPure&trade; Mini App &mdash; the manufacturer-validated control interface for the IsoPure Mini automated magnetic bead purification system (AP1016 / AP1016-E). Ships ready to pair with the instrument; no additional software setup required.

Manufectuer

Microplate Reader Accessories

<h2>What Are Microplate Reader Accessories?</h2>
&nbsp;
Microplate reader accessories are supplementary components that extend detection range, maintain instrument performance, and support compliance in regulated workflows. They fall into four groups: optical accessories (filters, filter cubes, and polarizers for wavelength selection in fluorescence and absorbance detection); illumination accessories (replacement xenon flash lamps, deuterium lamps, or LED upgrade modules that provide the excitation light source); calibration and validation tools (absorbance validation plates with certified reference values, fluorescence uniformity plates, and luminescence performance standards used to verify reader performance); and automation and software accessories (reagent injectors for kinetic luminescence assays, plate stackers for unattended batch reading, and software module licenses for 21 CFR Part 11 compliance, spectral scanning, or advanced kinetics). Because accessory designs are manufacturer-specific, a filter block designed for one plate reader brand will not fit another; always order accessories using the instrument's model number as the primary specification parameter. Filter sets are the most commonly needed accessory for multi-mode readers; confirm the filter block format and thread size for your specific reader model before ordering, as filter cube dimensions vary significantly between manufacturers and generations.
&nbsp;
<h2 dir="ltr">What you will find: </h2>
<ul>
<li data-section-id="23xybn" data-start="25" data-end="117">Replacement filters and optical accessories for maintaining microplate reader performance.</li>
<li data-section-id="71w1ic" data-start="118" data-end="209">Calibration and validation tools to support accurate and reproducible assay measurements.</li>
<li data-section-id="6jcbpl" data-start="210" data-end="312">Microplates and consumables compatible with absorbance, fluorescence, and luminescence applications.</li>
<li data-section-id="y9aam2" data-start="313" data-end="396">Replacement components and maintenance accessories for routine instrument upkeep.</li>
<li data-section-id="qoq7y7" data-start="397" data-end="523" data-is-last-node="">Accessories designed to support ELISA, cell-based assays, nucleic acid quantification, and other microplate-based workflows.</li>
</ul>
&nbsp;
<h2>How to Choose Microplate Reader Accessories</h2>
&nbsp;
Filter sets for fluorescence and absorbance.
Fluorescence filter sets (excitation filter, dichroic mirror, emission filter) must match both the fluorophore's excitation and emission spectra and the filter cube housing format of the specific reader. Most microplate reader filters use standard 25 mm diameter circular filters; some readers use 12 mm micro-filters. Common fluorescence filter sets: FITC/SYBR Green (Ex 485/12 nm, Em 520/10 nm); DAPI/Hoechst (Ex 360/40 nm, Em 460/40 nm); TRITC/PI (Ex 544/10 nm, Em 620/10 nm); Cy5 (Ex 620/10 nm, Em 680/10 nm). For absorbance, filter-based readers require individual narrow-bandpass filters at the wavelengths required by each assay protocol: 450 nm for ELISA, 595 nm for Bradford, 562 nm for BCA, 260 nm, and 280 nm for nucleic acid and protein.
Replacement lamps
Xenon flash lamps are the standard excitation source in high-quality fluorescence and absorbance microplate readers; typical lamp lifetime is 500 million flashes (approximately 3 to 5 years of daily use). Lamp output decreases gradually before failure; rising CV% in repeated measurements of the same standard is the first sign of lamp degradation. Replacement xenon flash lamps are model-specific; confirm part number from the instrument manual before ordering. Some instrument manufacturers have transitioned to LED-based excitation sources, which have much longer lifetimes (50,000+ hours) and do not require routine lamp replacement.
Calibration and validation plates
Calibration plates contain certified optical standards (neutral density filters, fluorescent reference dyes at known concentrations, or luminescent reference materials) in an SBS-format plate footprint for installation in the plate carriage. They are used to verify photometric accuracy, linearity, and inter-well uniformity (CV% across all 96 or 384 wells). These verifications are required in ISO 17025 accredited labs and GLP/GMP environments, and recommended as best practice for any lab relying on quantitative plate reader data. Validation plates are model-specific and must be re-certified periodically (typically annually) by the manufacturer.
Reagent injectors
Reagent injectors are syringe-pump accessories that dispense a defined volume of reagent into each well of a microplate immediately before or during reading, required for luminescence kinetic assays (luciferase, beta-galactosidase, flash luminescence from coelenterazine), where the signal decays rapidly after reagent addition. Single injectors add one reagent (e.g., luciferase substrate); dual injectors allow sequential addition of two reagents for sequential flash and glow luminescence detection. Injectors are model-specific and must be installed and calibrated by the manufacturer or a qualified service engineer.
Plate stackers and automation accessories
Plate stacker modules load and unload microplates automatically from a tray of 10 to 50 plates, allowing unattended overnight batch reading. Integration with laboratory robotics and LIMS extends this to fully automated plate reading workflows. Plate stackers are model-specific and typically sold as separate accessories from the reader. Confirm that the plate stacker is compatible with the specific plate type (96-well standard, 384-well, with or without sealing film) and the plate loading orientation.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Filter bandpass width (the FWHM of the filter transmission curve) affects sensitivity and selectivity. Narrower bandpass filters (10 nm FWHM) improve selectivity by excluding off-target fluorophore emission but transmit less light, reducing signal. Wider bandpass filters (20 to 40 nm) transmit more light for a brighter signal, but may allow bleed-through from closely overlapping fluorophores. In multiplex assays with two or more fluorophores, narrow bandpass emission filters reduce spectral cross-talk between channels. Optical density (OD) of the blocking region outside the transmission band should be at least OD 5 to OD 6 for fluorescence filters to prevent light leakage from the excitation source from reaching the detector.
&nbsp;
To discuss product availability or get selection guidance,&nbsp;<a href="https://mbpinc.net/contact-us">contact the MBP team</a>.

SmartDrop Accessory Plate for UV-Range Microplate Readers

The MR9610-SDP SmartDrop by Accuris (Benchmark Scientific) is a micro-volume accessory plate for the Accuris MR9610 and MR9611 SmartReader UV-Vis microplate readers. It measures up to 16 nucleic acid or protein samples using less than 0.5 &micro;L per position&mdash;enabling A260, A260/A280, BCA, and Bradford measurements without a standalone nanodrop instrument.

Universal Centrifuge Accessories

<h2>What Are Universal Centrifuge Accessories?</h2>
&nbsp;
Universal centrifuge accessories are the interchangeable components that determine the range of applications a universal centrifuge can perform. These include swing-out rotor buckets for blood tubes, conical tubes, microplates, and large bottles; fixed-angle rotors for high-speed pelleting; hematocrit and cytospin rotors; tube adapters; and aerosol-tight bio-containment lids. Selecting the appropriate accessories allows a single centrifuge to support multiple laboratory workflows efficiently and safely.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Tube adapters and inserts for compatibility with multi-volume samples&nbsp;
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Fixed-angle and swing-out rotors for varied centrifugation applications
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Lids and sealed buckets for safe and reliable operations
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
PCR adapters and microplate carriers for high-throughput workflows
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Centrifuge tubes, holders, and supporting aids for efficient and complete setups
</li>
</ul>
&nbsp;
<h2>How to Choose Universal Centrifuge Accessories</h2>
&nbsp;
Swing-Out Bucket Selection by Application
Choose swing-out buckets according to the sample formats used in your laboratory. Blood tube buckets support routine clinical applications, conical tube buckets are suitable for cell culture and molecular biology, microplate carriers enable high-throughput workflows, and large-bottle carriers accommodate large-volume sample processing.
Fixed-Angle Rotors
Fixed-angle rotors provide higher centrifugal forces for microtube, PCR tube, and small-volume sample processing. Ensure that both the rotor and centrifuge motor specifications support the required operating speeds and sample formats.
Cytospin Clip Rotors
Cytospin rotors are designed for preparing microscope slides from low-cellularity samples such as body fluids. Verify compatibility with the required funnel sizes and use bio-containment features when processing potentially infectious materials.
Bio-Containment Lids
Aerosol-tight lids help contain biological samples during centrifugation and support safe laboratory practices. Regular inspection of sealing components and O-rings ensures reliable containment and long-term performance.
Reducing Adapter Inserts
Adapter inserts allow smaller tubes to fit securely within larger bucket positions. Using properly matched adapters improves balance, prevents movement during operation, and helps maintain consistent centrifugation results.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Modern universal centrifuge systems support interchangeable accessory configurations that enable rapid transitions between clinical, research, cell culture, and cytology workflows. Swing-out buckets, fixed-angle rotors, and microplate carriers provide flexibility while maintaining compatibility with a broad range of vessel formats.
Routine inspection and maintenance of accessories, including adapters, lids, and sealing components, help ensure safe operation and extend equipment lifespan. Advances in bio-containment systems and modular rotor designs continue to improve laboratory efficiency and versatility.
Time to upgrade your universal centrifuge accessories. <a href="https://mbpinc.net/contact-us">Contact the expert team </a>of Molecular Biology Products Inc. (MBP) and the find perfect match today.

6 x 15ml conical insert for 500ml rotor, 2/pk.

Z446-500-A15 by Hermle is a 6 x 15 ml conical tube insert for the Z446-04500 (4 x 500 ml) fixed-angle rotor, sold in a pack of 2. Enables 15 ml conical centrifugation at up to 8,000 rpm (10,367 xg) on the Hermle Z446 and Z446-K high-capacity centrifuges &mdash; 2 inserts per pack cover 2 of the 4 rotor positions.

Vortex Mixers Accessories

<h2>What are vortex mixer accessories?</h2>
&nbsp;
Vortex mixer accessories are the interchangeable cup heads, foam inserts, and platform adapters that convert a standard single-tube vortex mixer to batch-process multiple tubes or different vessel formats simultaneously. The standard single-tube cup head can be replaced with a multi-tube foam insert holding 6 to 24 microcentrifuge tubes, a tube strip or microplate adapter, or a platform-style attachment for larger vessel formats. These accessories are typically instrument-specific, using a proprietary attachment mechanism that varies between vortex mixer brands.&nbsp;
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Tube racks for 0.5 ml, 1.5/2.0 ml, 12 mm, 13 mm, and 15 ml tubes</li>
<li dir="ltr" role="presentation">High-capacity tube racks for holding up to 96 samples</li>
<li dir="ltr" role="presentation">Horizontal heads for mixing 2 &times; 50 ml tubes and 4 &times; 15 ml tubes</li>
<li dir="ltr" role="presentation">Foam tube holders for 6 mm, 10 mm, 12 mm, and 16 mm tubes</li>
</ul>
&nbsp;
<h2>How to choose vortex mixer accessories</h2>
&nbsp;
Select foam inserts by the tube format they accommodate
Foam inserts for vortex mixers are sized to hold specific tube formats by pressing the closed tube caps into the foam at defined positions: standard microcentrifuge inserts hold 1.5 mL and 2 mL tubes, larger foam blocks accommodate 15 mL and 50 mL conical tubes, and low-profile inserts hold 0.5 mL tubes or PCR strip tubes in defined arrays. Check that the insert format matches the tube types you use most and that the insert is rated for your vortex mixer's speed range.
Confirm accessory compatibility with your vortex mixer model
Vortex mixer accessories attach via model-specific connectors &mdash; threaded onto the drive spindle or clipped onto the instrument head &mdash; and are not universally compatible between brands or models. Always check that the specific accessory is listed as compatible with your vortex mixer model before ordering.
Use a microplate adapter for 96-well plate mixing
Microplate vortex adapters replace the standard cup head with a flat or recessed platform sized to hold a standard 96-well plate, allowing entire plates to be mixed in continuous mode for ELISA plate washing steps, microplate cell resuspension, and plate-format biochemical assays. The adapter should be rated for the speed at which it will be used to prevent plate sliding.
Check that foam insert speed ratings are compatible with your operating speed
Foam inserts are rated for a maximum operating speed, and using a foam insert at speeds above its rating risks tubes not being securely retained by the foam compression at high rpm. Confirm that the insert's rated speed covers your intended operating speed before batch-processing valuable samples.
Consider a universal platform adapter for flexible use
Some vortex mixer manufacturers offer a universal platform adapter that replaces the cup head with a flat non-slip platform, accepting a wide range of vessel formats using a non-slip mat for retention. While less format-specific than a dedicated foam insert, a universal platform provides flexibility for less common vessel formats.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Foam inserts work by compressing foam around tube caps to provide frictional retention during high-speed oscillation; foam material and cell size determine tube sizes accommodated and maximum safe speed. As of 2026, inserts accommodating PCR strip tubes alongside microcentrifuge tubes in a single insert have become available, reducing the number of separate formats needed.
<a href="https://mbpinc.net/contact-us">Contact the MBP team</a> today to request a quote and find the right accessories for your vortex mixer.

Vortex Mixer Accessories

Optional Foam Rack for 12 x 15ml tubes (BV1003 model only)

BV1003-T150 by Benchmark Scientific is an optional foam rack that holds 12 x 15mL tubes and attaches to the BenchMixer V2 (BV1003) vortex mixer only.

Thermal Labels

<h2 dir="ltr">What Are Laboratory Thermal Labels?</h2>
 Laboratory thermal labels are adhesive labels designed for printing by direct-thermal or thermal-transfer desktop label printers &mdash; the two print technologies used for barcode and specimen ID generation in research, clinical, and diagnostic labs. Direct-thermal labels activate a heat-sensitive coating to produce an image without ink or ribbon; thermal-transfer labels use a resin or wax ribbon to fuse ink into the label surface. Thermal labels cover a wide range of container types: cryo vials, microcentrifuge tubes, PCR strips, 15/50 mL conicals, microscope slides, and specimen collection bags. Choose thermal-transfer labels for any sample requiring chemical resistance, temperatures above +50 &deg;C, or long-term barcode legibility; choose direct-thermal for low-cost, short-to-medium-term applications.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Direct thermal labels for quick, ink-free sample identification.
</li>
<li dir="ltr" aria-level="1">
Thermal transfer rolls for high-durability, permanent barcode printing.
</li>
<li dir="ltr" aria-level="1">
Solvent-resistant labels that withstand alcohol and cleaning agents.
</li>
<li dir="ltr" aria-level="1">
Freezer-grade thermal stickers for stable low-temperature archiving.
</li>
<li dir="ltr" aria-level="1">
Perforated label rolls for easy tearing and rapid application.
</li>
<li dir="ltr" aria-level="1">
Various sizes tailored for microtube caps and side-wall labeling.
</li>
</ul>
<h2 dir="ltr"> How to Choose Laboratory Thermal Labels</h2>
 Print Technology Compatibility Confirm whether the printer is direct-thermal (no ribbon required, e.g., Zebra GK420d, DYMO LabelWriter) or thermal-transfer (ribbon required, e.g., Zebra ZT230, Datamax M-Class). The two label types are not interchangeable &mdash; a thermal-transfer label will not print correctly in a direct-thermal printer and vice versa. Temperature and Chemical Exposure Direct-thermal label coatings degrade above approximately 50&ndash;60 &deg;C and with prolonged UV exposure, limiting their use to room-temperature and short-term cold storage applications. Thermal-transfer labels with a resin ribbon produce output resistant to temperatures up to +100 &deg;C, ethanol, xylene, and sanitizing wipes &mdash; required for autoclave tracking, histology, and GLP-regulated sample management. Container and Size Match Label dimensions must match the printable area of the label and the geometry of the container. Common lab thermal label widths are 0.5&ndash;2 inches; lengths are 0.25&ndash;3 inches. Verify dimensions against the container's flat-printable surface, accounting for any wrap-around on curved vials. Roll Core and Printer Compatibility Standard roll cores are 1-inch inner diameter for compact desktop printers; 3-inch cores fit high-volume industrial label printers. Confirm the printer's maximum roll diameter and label width capability before selecting roll format. Material: Paper vs. Polyester Paper-based thermal labels cost less and are suitable for ambient-temperature, short-duration applications (reagent dating, sample intake). Polyester thermal labels are moisture-resistant, more tear-resistant, and rated for demanding environments including freezers and chemical splash &mdash; specified for long-term specimen tracking and any application where label durability is a safety or compliance requirement. 
<h2 dir="ltr"> Specifications Context</h2>
 Direct-thermal label paper weight is typically 58&ndash;80 g/m&sup2;; polyester variants are 50&ndash;100 &micro;m thick. Standard roll dimensions are 2.25 inches &times; 1.25 inches (common for specimen tubes) and 4 inches &times; 6 inches (common for shipping and larger specimen bags). Print resolution for lab barcode labels should be 300 dpi for 1D/2D barcodes on labels smaller than 1 inch &times; 0.5 inch &mdash; 203 dpi produces legible output on larger-format labels.&nbsp;
&nbsp;
Stop struggling with faded barcodes. <a href="https://mbpinc.net/contact-us" style="color: #236fa1;">Ask the MBP Team</a> for a quote right now, we help you make your data permanent.

Direct Thermal Label Rolls for Cryogenic Vials

Direct Thermal Cryogenic Label Rolls (LTC-27X13) &ndash; 27 &times; 13 mm, 1,000 labels per roll. Special cold-temperature adhesive rated to &minus;196 &deg;C (&minus;311 &deg;F). Direct thermal printing, no ink or ribbon needed. Smudge-resistant, writeable surface. Available in Blue, Green, Orange, Red, and White. Made in the USA. Printing instructions and template included.

Label Roll, Cryo, Direct Thermal, 27x13mm, for Cryogenic Vials, Blue, ROLL/1000

Label Roll, Cryo, Direct Thermal, 27x13mm, for Cryogenic Vials, Orange, ROLL/1000

Label Roll, Cryo, Direct Thermal, 38x13mm, for Cryogenic Vials, Blue, ROLL/750

Label Roll, Cryo, Direct Thermal, 38x13mm, for Cryogenic Vials, Orange, ROLL/750

Label Roll, Cryo, Direct Thermal, 27x13mm, for Cryogenic Vials, Green, ROLL/1000

Label Roll, Cryo, Direct Thermal, 27x13mm, for Cryogenic Vials, Red, ROLL/1000

Label Roll, Cryo, Direct Thermal, 27x13mm, for Cryogenic Vials, White, ROLL/1000

Label Roll, Cryo, Direct Thermal, 27x13mm, for Cryogenic Vials, Yellow, ROLL/1000

Label Roll, Cryo, Direct Thermal, 38x13mm, for Cryogenic Vials, Green, ROLL/750

Label Roll, Cryo, Direct Thermal, 38x13mm, for Cryogenic Vials, Red, ROLL/750

Label Roll, Cryo, Direct Thermal, 38x13mm, for Cryogenic Vials, White, ROLL/750

Label Roll, Cryo, Direct Thermal, 38x13mm, for Cryogenic Vials, Yellow, ROLL/750

Microcentrifuges

<h2>What Are Microcentrifuges?</h2>
&nbsp;
Microcentrifuges are compact, high-speed benchtop centrifuges designed specifically for 0.2&ndash;2.0 mL microtubes and PCR strips, operating at 10,000&ndash;21,000 &times;g in a fixed-angle rotor. They are the primary centrifugation instrument in molecular biology, biochemistry, and clinical molecular diagnostics labs: nucleic acid pellet formation after ethanol precipitation, spin-column DNA/RNA extraction and PCR cleanup steps (typically specified at 10,000&ndash;16,000 &times;g for 30&ndash;60 seconds), cell debris clearance from lysates, protein precipitation supernatant recovery, and brief sample clarification before downstream analysis. Standard benchtop microcentrifuges reach 14,000&ndash;15,000 RPM (16,000&ndash;21,000 &times;g), while high-speed models reach up to 21,000 RPM and approximately 31,000 &times;g. Refrigerated variants maintain 0&ndash;4&deg;C for temperature-sensitive workflows.
&nbsp;
<h2>What You Will Find:</h2>
&nbsp;
<ul>
<li>High-Speed Microcentrifuges: For faster sample processing</li>
<li>Refrigerated Microcentrifuges: For temperature-sensitive handling</li>
<li>Benchtop Microcentrifuge Systems: For routine lab working</li>
<li>5D Digital Microcentrifuge: With customizable time and speed options</li>
<li>Mini Microcentrifuges: Compact units for rapid spin-down tasks</li>
<li>MC-24 High-Speed Microcentrifuge: Features touch screen control and high speed</li>
<li>Microplate Centrifuges: Developed for PCR plates and strip formats</li>
<li>Microcentrifuge Accessories: For expanded tube flexibility and compatibility</li>
</ul>
&nbsp;
<h2>How to Choose a Microcentrifuge</h2>
&nbsp;
Maximum RCF vs. Protocol Requirements
Most spin-column kit protocols specify 10,000&ndash;16,000 &times;g. A standard microcentrifuge reaching 14,000&ndash;16,000 &times;g covers these requirements. If your lab performs alcohol-precipitation DNA/RNA pelleting (12,000&ndash;16,000 &times;g) or virus concentration steps (20,000+ &times;g), choose a model reaching at least 16,000 &times;g. High-speed models reaching 21,000&ndash;31,000 &times;g are available for specialized applications.
Rotor Tube Positions and Capacity
Most microcentrifuge rotors hold 12&ndash;24 &times; 1.5/2.0 mL tubes per run. Laboratories processing larger batches benefit from 24-position rotors, while smaller research groups may find 12-position models sufficient. Confirm that adapters for 0.5 mL and 0.2 mL tubes are available if required by your workflows.
Refrigerated vs. Ambient Temperature
Refrigerated microcentrifuges are recommended for RNA extraction, protein stability studies, cell viability applications, and any protocol requiring 4&deg;C centrifugation. Standard room-temperature models are suitable for routine DNA extraction and PCR cleanup procedures.
Noise Level and Footprint
Modern brushless DC motor microcentrifuges typically operate at &le;52 dB, making them quieter than older brush-motor systems. Most units occupy 200&ndash;300 mm of bench width, so confirm that sufficient clearance is available when the lid is fully open.
Safety Features
Essential safety features include lid-lock mechanisms, imbalance detection, and over-speed protection. Laboratories handling infectious materials should verify that aerosol-tight sealed rotor lids are available for the selected model.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
The standard spin-column step in most commercial DNA/RNA extraction kits specifies 10,000&ndash;16,000 &times;g for 30&ndash;60 seconds. Always confirm the rotor's maximum RCF from manufacturer specifications, since RPM values alone do not account for differences in rotor radius.
Microcentrifuge rotors are typically fixed-angle designs positioned at approximately 45&deg;, providing efficient pelleting and short sedimentation paths. Aerosol-tight sealed lids allow safe handling of BSL-2 samples and other applications requiring biocontainment. Modern brushless DC motors offer quieter performance, improved speed accuracy, and longer service intervals than legacy brush-motor systems.
Your search for high-performance microcentrifuges is over. <a href="https://mbpinc.net/contact-us">Contact now</a> with the expert team at Molecular Biology Products Inc. and get the right microcentrifuge for your lab today.

Microcentrifuge

GCM Refrigerated Microcentrifuge Series

GCM-R-24 by Globe Scientific is a high-speed refrigerated microcentrifuge reaching 15,000 RPM (21,380 &times; g) with a temperature range of -20&deg;C to 40&deg;C, cooling to 4&deg;C within 7 minutes at full capacity. The 24-place aluminum rotor and aerosol containment lid are fully autoclavable, supporting safe processing of temperature-sensitive biological samples at noise levels below 54 dB.

Maximum Speed

Maximum RCF

Speed Accuracy

Temperature Range

Rotor Capacity

Run Time

Power

Acceleration Time

Braking Time

Dimension (W x D x H)

Centrifuge, Micro, Refrigerated, 24-Place, High Speed, 120v, 60Hz, US Plug (Includes: 24-Place Rotor with Lid for 1.5mL and 2.0mL Microcentrifuge Tubes #MC-24-2ML)

Centrifuge, Micro, Refrigerated, 24-Place, High Speed, 230v, 50Hz, UK Plug (Includes: 24-Place Rotor with Lid for 1.5mL and 2.0mL Microcentrifuge Tubes #MC-24-2ML)

Centrifuge, Micro, Refrigerated, 24-Place, High Speed, 230v, 50Hz, EU Plug (Includes: 24-Place Rotor with Lid for 1.5mL and 2.0mL Microcentrifuge Tubes #MC-24-2ML)