Brands

UV Transilluminators

User Manaual

Accuris™ UV Transilluminator

E3000 by Accuris Instruments is a 302 nm UV transilluminator with a 16 × 19 cm black tempered glass viewing surface, four high-intensity UV bulbs, and a dual-intensity switch (50% / 100%) for DNA-safe gel visualization and band excision. Compatible with EtBr, SYBR Green, and SmartGlow stained gels. Pairs with the SmartDoc™ imaging enclosure (filters E5001-535 / E5001-590) for camera documentation. 115 V standard; 230 V available as E3000-E. Order at mbpinc.net.

Manufacture

Accuris™ UV Transilluminator, 230V input

<h2>What Are UV Transilluminators?</h2>
&nbsp;
A UV transilluminator is a device with a UV-emitting lamp (fluorescent tube or LED) beneath a UV-transparent filter glass or acrylic surface that allows ultraviolet light to pass upward through a gel or membrane placed on top, exciting fluorescent dye molecules intercalated into nucleic acids and causing them to emit visible fluorescence. The visible fluorescence forms the bright bands on a dark background seen when a stained DNA gel is placed on a UV transilluminator. Three UV wavelengths are used: 254 nm for maximum DNA cross-linking and nick analysis; 302 nm (medium-wave UV) for EtBr and SYBR stains with high sensitivity but significant DNA damage at exposures above 30 seconds; and 365 nm (long-wave UV) for the lowest DNA damage during gel cutting and for viewing EtBr at reduced band contrast. Blue-light transilluminators at 465-470 nm replace UV entirely for compatible dyes, eliminating UV-induced DNA damage and hazardous UV exposure. Choose the transilluminator wavelength based on the dye used and whether the DNA will be recovered from the gel for downstream cloning or sequencing - 302 nm for EtBr visualization only; 365 nm or blue-LED for band cutting.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
<a href="mbpinc.net/equipments/electrophoresis-and-visualization/uv-transilluminators/uv-transilluminators-accessories">UV Transilluminator Accessories:</a>&nbsp;Essential protective gear and upgrade components designed to enhance your imaging workflow and user safety.
</li>
<li dir="ltr" aria-level="1">
<a href="mbpinc.net/equipments/electrophoresis-and-visualization/uv-transilluminators/reagents">Reagents: </a>Premium-grade stains and buffers formulated to provide high signal-to-noise ratios and optimized fluorescence for every run.
</li>
</ul>
&nbsp;
<h2>How to Choose a UV Transilluminator</h2>
&nbsp;
Wavelength selection
254 nm UV is optimal for photocrosslinking DNA to nylon membranes (UV crosslinkers, 120 mJ/cm2 standard crosslinking dose) and for maximum excitation of some dyes, but causes severe DNA strand breaks. 302 nm is the standard wavelength for EtBr gel visualization, providing bright bands in 10-30 seconds; DNA damage begins immediately at this wavelength, so exposure should be minimized to under 30 seconds for any DNA intended for cloning. 365 nm gives lower EtBr fluorescence intensity but dramatically reduces DNA strand breaks, making it preferred when gel band cutting and subsequent cloning efficiency are important. Blue LED at 465-470 nm is the safest option for any downstream application and is used with SYBR Safe, GelGreen, and SafeView stains.
UV lamp type: tube vs. LED
Traditional UV transilluminators use fluorescent UV tubes (8-25 W), which require 1-2 minutes of warm-up time, have a lifespan of 2,000-5,000 hours before replacement, and emit heat that can warm the gel surface during extended exposure. LED-based UV transilluminators offer instant-on capability (no warm-up), 50,000+ hour LED lifespan, lower energy consumption, and no UV tube replacement cost. As of 2025, LED UV and blue-LED transilluminators are standard in new lab installations; fluorescent tube models remain common in established labs.
Viewing surface dimensions
The UV-transparent surface determines the maximum gel size that can be viewed in one placement. Standard viewing surfaces are 20 x 20 cm (400 cm2) for standard agarose gels. Compact transilluminators with 10 x 10 cm surfaces (100 cm2) suit mini gel systems. Large-format transilluminators with 30 x 30 cm (900 cm2) surfaces can accommodate multiple gels or wide-format gels simultaneously. Confirm that the viewing surface area is larger than your largest gel tray to avoid needing to reposition the gel during band visualization.
UV safety features
UV transilluminators emit radiation that causes photokeratitis (eye damage) and skin burns within seconds of unprotected exposure. Safety requirements include: UV-blocking face shields or goggles (polycarbonate blocks UV below 380 nm); UV-opaque lab coat or arm sleeves; a darkroom enclosure or hood to contain UV radiation during imaging; and an auto-shutoff timer to limit exposure time. Gel doc systems with enclosed hoods automatically contain UV radiation and are inherently safer than open-top transilluminators used with handheld cameras.
Compatibility with SafeView DNA stains
SafeView stains (Safe-Green, Safe-Red, Safe-White) from MBP are compatible with UV transilluminators at 302-365 nm as well as blue-LED sources. Safe-Green (excitation 490 nm, emission 525 nm) is best with blue-LED at 470 nm. Safe-Red (excitation 540 nm, emission 630 nm) requires a green LED or white light source. UV transilluminators will visualize Safe-Green at reduced efficiency compared to blue-LED; for best results with SafeView stains, a dual UV + blue-LED system is recommended.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
UV transilluminator output intensity is specified in milliwatts per square centimeter (mW/cm2) at the viewing surface; 5-25 mW/cm2 at 302 nm is typical for research-grade instruments. Higher intensity enables shorter exposure times to minimize DNA damage. UV tube replacement is required every 2,000-5,000 hours of use for fluorescent-tube models; performance degrades progressively as the tube ages. Replacement tubes for standard 8 W or 15 W UV transilluminators are available through laboratory supply channels. Blue-light transilluminators at 470 nm have been shown in published studies to cause no measurable reduction in cloning efficiency even after 30-minute exposure, compared to a 30-second UV exposure that reduces transformation efficiency by 40-50% when using EtBr-stained DNA. Blue-LED transilluminators are the default specification for new labs purchasing gel visualization equipment, driven by safety compliance requirements in many institutions and the growing adoption of non-mutagenic dyes, including SafeView, SYBR Safe, and GelGreen.
&nbsp;
To discuss product availability or get selection guidance,&nbsp;<a href="https://mbpinc.net/contact-us">contact the MBP team</a>.

Product Literature

Accuris™ UV Transilluminators Specifications

Accuris™ UV Transilluminator, 21x26cm, Variable Intensity

E3200 by Accuris Instruments is a UV transilluminator with a 21 × 26 cm viewing surface, 302 nm peak-emission wavelength, and variable-intensity control via a continuous adjustment knob. Four 14-watt UV bulbs resolve faint stained nucleic acid bands on large or multiple gels simultaneously. Scratch-resistant UV filter glass and acrylic UV-blocking covers with friction hinges support safe gel access at 115V.

Accuris™ UV Transilluminator, 21x26cm, Variable Intensity, 115V

Accuris™ UV Transilluminator, 21x26cm, Variable Intensity, 230V

<h2 data-section-id="1go10h8" data-start="173" data-end="215">What are classic cell culture media?</h2>
&nbsp;
Classic cell culture media refers to the foundational basal medium formulations that have underpinned mammalian cell culture since the mid-20th century: DMEM (Dulbecco's Modified Eagle Medium), MEM (Minimum Essential Medium), RPMI 1640, Ham's Nutrient Mixtures F-10 and F-12, IMDM (Iscove's Modified Dulbecco's Medium), and the combination formulation DMEM/F-12. Each is manufactured according to its originally published formula, with modifications limited to those necessary for consistent performance and stability of the medium over its shelf life. These media supply the amino acids, vitamins, glucose, salts, and (in most formulations) phenol red pH indicator that form the nutritional backbone of essentially all subsequent specialty, serum-free, and Advanced media derivatives.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Selective Mammalian Antibiotics including Puromycin, Geneticin, and Hygromycin B for stable development of cell lines.</li>
<li dir="ltr" role="presentation">Broad-Spectrum Bactericidal Agents for routine contamination prevention, including Penicillin/Streptomycin and Gentamicin&nbsp;</li>
<li dir="ltr" role="presentation">Prokaryotic Selection Reagents for effective bacterial transformation, including Ampicillin, Kanamycin, Chloramphenicol, and Tetracycline&nbsp;</li>
<li dir="ltr" role="presentation">Antifungal and Antimycotic Solutions to maintain sterile cultures, including combined 100X cocktails and Amphotericin B (Fungizone)&nbsp;</li>
<li dir="ltr" role="presentation">Specialized Small Molecules for targeted biochemical assays, including Ganciclovir, Rapamycin, and Actinomycin D&nbsp;</li>
</ul>
&nbsp;
<h2 data-section-id="1mfajxk" data-start="1218" data-end="1252">How to choose a classic medium</h2>
&nbsp;
DMEM vs MEM
DMEM contains up to four times the amino acid and vitamin concentration of original Eagle's MEM, along with higher glucose levels, making it suitable for cell types with elevated nutrient demands &mdash; DMEM is broadly applicable across mammalian, insect, and plant cell phenotypes including primary cells, stem cells, and transformed lines. MEM remains widely used for monolayer culture of many standard cell types, with optional Hanks' or Earle's salt formulations and a calcium-free modification that permits suspension growth.
RPMI 1640 for suspension and hematopoietic culture
RPMI 1640, developed at the Roswell Park Memorial Institute for culturing human leukemic cells, is optimized for non-adherent cell types &mdash; lymphocytes and other blood cells &mdash; and contains glutathione plus higher biotin, B12, and PABA concentrations than DMEM or MEM. Despite its hematopoietic origin, RPMI 1640 supports a broad range of adherent lines (HeLa, T47D, RENCA, CT26.WT) when properly supplemented.
Ham's F-10/F-12 for CHO and specialized applications
Ham's nutrient mixtures were originally developed for CHO cell clones, HeLa cells, and mouse L-cells, and remain suited to hepatocyte culture, viral fusion experiments, and toxicity assays, with formulations available for use with or without serum. Coon's modification of Ham's F-12 roughly doubles the amino acid and pyruvate content and adds ascorbic acid, developed specifically for hybrid cells produced by viral fusion.
DMEM/F-12 for complex, rich-medium applications
DMEM/F-12 (1:1 mixture) combines DMEM's glucose, amino acid, and vitamin richness with Ham's F-12's zinc, putrescine, hypoxanthine, and thymidine, producing an extremely rich complex medium used for MDCK cells, glial cells, fibroblasts, and human endothelial cells &mdash; and serving as the basal medium for many serum-free Advanced formulations used in organoid and stem cell work.
IMDM for high-density rapid proliferation
IMDM further enriches DMEM with additional amino acids and vitamins, substituting potassium nitrate for ferric nitrate and adding HEPES and sodium pyruvate. IMDM's sodium bicarbonate buffer system (5&ndash;10% CO₂) and enriched composition make it well suited for rapidly proliferating, high-density cultures including Jurkat, COS-7, and macrophage cells.
Liquid vs. powder format
Liquid classic media are ready to use (after appropriate FBS and supplement addition) and include sodium bicarbonate in the formulation. Powdered media are manufactured without sodium bicarbonate, since it tends to off-gas in powder form &mdash; 3.7 g/L sodium bicarbonate must be added upon reconstitution, followed by sterile filtration. Powder formats offer cost and shipping-weight advantages for high-volume labs preparing their own media.
&nbsp;
<h2 data-section-id="17i0pj" data-start="5035" data-end="5061">Specifications context</h2>
&nbsp;
Classic media are manufactured according to originally published formulas, with stability-related modifications documented per product. DMEM's sodium bicarbonate buffer system at 3.7 g/L is standard across liquid formulations; powdered formats require this addition upon reconstitution along with 0.22 &micro;m sterile filtration. As of 2026, DMEM, DMEM/F-12, and RPMI 1640 remain the three most widely specified classic media across academic and biomanufacturing labs, with IMDM increasingly used for high-density suspension applications in bioprocessing.
For recombinant growth factors and cytokines used alongside classic media, see Recombinant Proteins. For supplementation reagents (GlutaMAX, NEAA, sodium pyruvate, HEPES), see Cell Culture Supplements &amp; Additives. Browse Mammalian Cell Culture for the broader category.
<a href="https://mbpinc.net/contact-us">Contact the expert team </a>at MBP to get highly efficient microbial control solutions for your lab.

Antibiotics

MSDS

Actinomycin D

Unit Quantity

Concentration

Storage Condition

Shipping condition

Universal Centrifuge Accessories

<h2>What Are Universal Centrifuge Accessories?</h2>
&nbsp;
Universal centrifuge accessories are the interchangeable components that determine the range of applications a universal centrifuge can perform. These include swing-out rotor buckets for blood tubes, conical tubes, microplates, and large bottles; fixed-angle rotors for high-speed pelleting; hematocrit and cytospin rotors; tube adapters; and aerosol-tight bio-containment lids. Selecting the appropriate accessories allows a single centrifuge to support multiple laboratory workflows efficiently and safely.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Tube adapters and inserts for compatibility with multi-volume samples&nbsp;
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Fixed-angle and swing-out rotors for varied centrifugation applications
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Lids and sealed buckets for safe and reliable operations
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
PCR adapters and microplate carriers for high-throughput workflows
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Centrifuge tubes, holders, and supporting aids for efficient and complete setups
</li>
</ul>
&nbsp;
<h2>How to Choose Universal Centrifuge Accessories</h2>
&nbsp;
Swing-Out Bucket Selection by Application
Choose swing-out buckets according to the sample formats used in your laboratory. Blood tube buckets support routine clinical applications, conical tube buckets are suitable for cell culture and molecular biology, microplate carriers enable high-throughput workflows, and large-bottle carriers accommodate large-volume sample processing.
Fixed-Angle Rotors
Fixed-angle rotors provide higher centrifugal forces for microtube, PCR tube, and small-volume sample processing. Ensure that both the rotor and centrifuge motor specifications support the required operating speeds and sample formats.
Cytospin Clip Rotors
Cytospin rotors are designed for preparing microscope slides from low-cellularity samples such as body fluids. Verify compatibility with the required funnel sizes and use bio-containment features when processing potentially infectious materials.
Bio-Containment Lids
Aerosol-tight lids help contain biological samples during centrifugation and support safe laboratory practices. Regular inspection of sealing components and O-rings ensures reliable containment and long-term performance.
Reducing Adapter Inserts
Adapter inserts allow smaller tubes to fit securely within larger bucket positions. Using properly matched adapters improves balance, prevents movement during operation, and helps maintain consistent centrifugation results.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Modern universal centrifuge systems support interchangeable accessory configurations that enable rapid transitions between clinical, research, cell culture, and cytology workflows. Swing-out buckets, fixed-angle rotors, and microplate carriers provide flexibility while maintaining compatibility with a broad range of vessel formats.
Routine inspection and maintenance of accessories, including adapters, lids, and sealing components, help ensure safe operation and extend equipment lifespan. Advances in bio-containment systems and modular rotor designs continue to improve laboratory efficiency and versatility.
Time to upgrade your universal centrifuge accessories. <a href="https://mbpinc.net/contact-us">Contact the expert team </a>of Molecular Biology Products Inc. (MBP) and the find perfect match today.

Adapter 4 x 15ml conical, 2/pk

The Z366-06250-A15 by Hermle adapts each bucket position of the Hermle Z366-06250 fixed-angle rotor to accept 4 × 15 ml conical tubes, with the 2-pack providing capacity for 8 × 15 ml tubes per run at up to 8,000 rpm / 10,016 × g.

Adapter 50ml conical, 2/pk

The Z366-06250-A50 by Hermle is a 50 ml conical tube adapter (2/pk) for the Z366-06250 6 x 250 ml fixed-angle rotor. Parent rotor: 8,000 rpm / 10,016 xg on Hermle Z366. Extends rotor to accept 50 ml conical tubes. Available from MBP Inc.

Adapter 50ml round, 2/pk

Z366-06250-A50R by Hermle is a 2-pack of reducing adapters that fit 50 ml round-bottom tubes into the 250 ml positions of the Hermle Z366-06250 fixed-angle rotor on Z366 and Z366-K centrifuges. Extends rotor versatility to 50 ml formats without a separate rotor purchase.

Adapter for 30ml round for 50ml rotors

Z326-50-A30 by Hermle/Benchmark Scientific is a 30 mL round tube adapter for the Z326-0650-HS (6×50 mL round rotor), allowing 30 mL round-bottom tube runs on Z326 and Z326-K centrifuges.

Dispenser Syringe Tips

Flyer

3920S-Group-RV-Pette PRO Brochure

Adapter for RV-Pette PRO Dispenser Syringe Tips

3930-A by Globe Scientific — adapter enabling 25 mL RV-Pette PRO dispenser tips (SKU 3930/3930S) to connect to the Diamond RV-Pette PRO™ and most repeat-volume pipettor brands. Required for 25 mL large-volume direct-displacement dispensing. Sold individually from MBP Inc.

Adapter for 25mL RV-Pette PRO Dispenser Tips, Red

Adapter for 50mL RV-Pette PRO Dispenser Tips, Gray

Oil Testing Centrifuge Accessories

<h2>What Are Oil Testing Centrifuge Accessories?</h2>
&nbsp;
Oil testing centrifuge accessories are the consumable and hardware components required to perform ASTM-compliant petroleum centrifuge tests. These include ASTM-calibrated borosilicate glass centrifuge tubes, tube cushions, rotor assemblies for different tube formats, replacement stoppers, and temperature-verification tools for heated chamber calibration. Since ASTM methods specify the exact tube format to be used, selecting the correct accessories is essential for maintaining test accuracy, compliance, and reliable BS&amp;W measurements.
&nbsp;
<h2>What You Will Find</h2>
&nbsp;
<ul>
<li>Spare Round Buckets: Replacement buckets for oil testing centrifuge systems</li>
<li>Adapters for Pear-Shaped Tubes: Ensure secure placement during petroleum testing procedures</li>
<li>Adapters for Conical Tubes: Support different ASTM sample tube configurations</li>
<li>Pear-Shaped Oil Test Tubes: Designed for standard fuel oil and crude oil analysis methods</li>
<li>Conical Oil Test Tubes: Suitable for multiple petroleum testing applications</li>
<li>Spare Bucket Inserts: Maintain proper tube alignment and stability during centrifugation</li>
</ul>
&nbsp;
<h2>How to Choose Oil Testing Centrifuge Accessories</h2>
&nbsp;
ASTM Tube Type Selection
Begin by identifying the ASTM method being performed. Pear-shaped and cone-style 100 mL tubes are commonly used for D96, D1796, and D4007 methods, while finger or capillary tubes support D2273 and D2709 procedures. Using the correct tube format is essential for obtaining compliant and reproducible results.
Tube Cushion Matching
Each tube style requires a matching cushion or insert that supports the glass body during centrifugation. Properly fitted cushions minimize vibration, reduce breakage risk, and maintain accurate positioning within the rotor assembly.
Rotor Assembly Selection
Many oil testing centrifuges support interchangeable rotor assemblies for different ASTM methods. Verify that the selected rotor is compatible with both the centrifuge model and the required tube format to ensure the correct operating conditions and centrifugal force.
Replacement Stoppers
Rubber and silicone stoppers experience wear from repeated exposure to solvents and elevated temperatures. Inspect stoppers regularly and replace them if cracking, swelling, or poor sealing performance is observed to maintain safe and reliable operation.
Temperature Verification Equipment
Heated petroleum centrifuges require periodic temperature verification to maintain ASTM compliance. Calibrated thermometers or thermocouple systems help confirm that operating temperatures remain within acceptable tolerances during routine testing procedures.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
ASTM-compliant petroleum centrifuge tubes are manufactured from borosilicate glass and must meet strict dimensional and graduation requirements. Proper tube selection, matched cushions, and compatible rotor assemblies all contribute to accurate BS&amp;W measurements and reliable laboratory performance.
Modern petroleum testing laboratories increasingly rely on durable etched graduations, improved sealing materials, and enhanced temperature-monitoring accessories to support long-term compliance with ASTM and industry testing standards.
So what are you waiting for? <a href="https://mbpinc.net/contact-us">Contact our expert team</a> at Molecular Biology Products Inc. to find the right oil testing centrifuge accessories for your lab.

Adapter for conical oil test tube, 2/pk

Z600-OL-CTC by Hermle is a 2-pack adapter set that converts the OLEUM Oil Testing Centrifuge (Z600-OL) rotor for use with ASTM pear-shaped and conical oil test tubes. Supplied in matched pairs for balanced rotor loading — order via Quick Order at mbpinc.net/quickorder using catalog number Z600-OL-CTC.

Adapter for pear shaped oil test tube, 2/pk

The Z600-OL-PTC by Hermle is a 2-pack of pear-shaped ASTM oil test tube adapters for the Z600-OL-COM swing-out rotor on the Hermle OLEUM Z600-OL oil-testing centrifuge (3,000 rpm / 2,216 × g). For conical ASTM tube format, use the Z600-OL-CTC adapter (sold separately).

Clinical Centrifuge Accessories

<h2>What Are Clinical Centrifuge Accessories?</h2>
&nbsp;
Clinical centrifuge accessories are the model-specific components that determine the safety, versatility, and compliance profile of a clinical centrifuge: swing-out rotors and fixed-angle rotors sized for standard blood collection tube formats, tube adapters that expand the rotor to accommodate 15 mL and 50 mL conicals, aerosol-tight sealed bucket lids for biocontainment of human and potentially infectious specimens, balance tubes for uneven sample counts, and replacement swing-bucket assemblies. In CLIA-regulated laboratories, calibration weights and documented tachometer verification at defined intervals are also part of the clinical centrifuge accessory program. None of these components are interchangeable between centrifuge models; all must be be confirmed compatible with the specific centrifuge model and rotor before ordering.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" role="presentation">Adapter packs for precise compatibility with rotors</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" role="presentation">Proficient adapters used in handling 5 mL and 7 mL tubes for C5000-8 and C5000-6 systems</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" role="presentation">Fixed-angle rotor as a replacement rotor option for Sprint&trade; 6H Plus&nbsp;</li>
</ul>
&nbsp;
<h2>How to Choose Clinical Centrifuge Accessories</h2>
&nbsp;
Rotor Format and Blood Tube Compatibility
The core clinical centrifuge rotor selection decision is tube format: confirm the swing-out rotor accepts your primary blood collection tube sizes (13&times;75 mm, 13&times;100 mm, 16&times;100 mm vacutainers) and the bucket depth matches the tube length. If your lab processes both 5 mL and 10 mL tubes, specify a rotor with adapters for both, or separate adapter inserts for the smaller format.
Aerosol-Tight Lids
Select sealed biocontainment lids rated for your centrifuge's maximum operating RCF (typically 3,000&ndash;3,500 &times;g for routine serum processing). Confirm the lid's O-ring material is compatible with 70% ethanol and 10% bleach decontamination&mdash;the two standard clinical lab disinfectants. O-rings require periodic replacement; maintain a stock of the correct size for each lid model in use.
Tube Adapters for Conicals
Most clinical labs also process 15 mL conical tubes for cell culture supernatant or urine samples. Confirm adapter availability for your swing-bucket buckets to accept 17&times;120 mm conicals; a separate adapter insert seats the conical at the correct radial position to prevent the tube tip from bearing unsupported centrifugal load during the spin.
Balance Tubes
Clinical labs routinely run partial rotor loads. Stock balance tubes matched to the outer diameter and length of each primary blood collection tube format used: 13 mm OD (5/7 mL) and 16 mm OD (10 mL) are the two most common sizes. Fill to the same liquid mass as the heaviest sample tube in the opposing bucket position.
Calibration and Compliance
CLIA and CAP accreditation programs require documented annual speed verification for clinical centrifuges. A calibrated handheld optical tachometer (non-contact RPM measurement) enables periodic verification against the centrifuge's displayed speed without opening the instrument. Document the tachometer model, calibration date, and measured vs. displayed RPM in the centrifuge maintenance log.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
CDC guidelines for safe work practices in human and animal diagnostic laboratories (MMWR 2012) specifically recommend sealed centrifuge rotors or safety bucket covers for all centrifugation of potentially infectious specimens. For CLIA and CAP compliance, centrifuge speed must be verified at least annually using a calibrated reference instrument; the measured RPM must be within &plusmn;10% of the displayed value per most accreditation interpretive guidelines.
Swing-bucket O-ring replacement intervals vary by manufacturer and should be based on visual inspection. Any O-ring showing flattening (compression set), surface cracks, or discoloration should be replaced before the centrifuge returns to service. Modern aerosol-tight lid systems with one-hand release mechanisms have become standard features in many new clinical centrifuge installations.
Get the exact accessories your equipment needs.&nbsp;<a href="https://mbpinc.net/contact-us">Contact the expert team&nbsp;</a>at Molecular Biology Products Inc. today.

Adapter pack for 1.5/2.0ml tubes in Z207-A rotors, 2/pk.

The Z326-15-A20 by Hermle is a pack of two adapters that allow 1.5 mL and 2.0 mL microcentrifuge tubes to run in the Hermle Z207-A swing-out rotor (15 mL positions) on the Hermle Z306 and Z326 Universal Centrifuges. The two-pack covers both rotor bucket positions for balanced simultaneous loading. For 5 mL or 7 mL format tubes in the same rotor, use the Z326-15-A5 or Z326-15-A7 adapters instead. Order at mbpinc.net/quickorder.

Adapter pack for 5ml tubes in Z207-A rotors, 2/pk.

Z326-15-A5 by Hermle is a 2-pack of tube adapters for fitting 5 ml tubes (13 mm diameter, 65–90 mm length) into the 8 × 15 ml fixed-angle rotor of the Hermle Z207-A clinical centrifuge. The adapters enable 5 ml tube centrifugation at up to 6,800 RPM / 4,394 × g without replacing the rotor. Compatible with both 115 V (Z207-A) and 230 V (Z207-A-E) models. Two adapters per pack.