Brands

Filtered Pipette Tips

<h2 dir="ltr"> What Are Filtered Pipette Tips?</h2>
 Filtered pipette tips contain a hydrophobic aerosol-barrier plug &mdash; polyethylene (PE) frit or cellulose &mdash; embedded inside the tip body, positioned to intercept aerosol and liquid that would otherwise travel up through the tip collar into the pipette barrel during dispensing or when handling volatile or splashing samples. The filter protects the pipette barrel from internal contamination (which requires costly professional decontamination) and protects samples from cross-contamination by previously deposited nucleic acids, proteins, or biohazardous material in the barrel. Filtered tips are the standard consumables for PCR and qPCR setup, RNA extraction, cDNA synthesis, working with radioactive or biohazardous agents, and any workflow where a single contaminated barrel could compromise a run or an experiment. Non-filtered tips remain appropriate for routine buffer, media, and reagent dispensing where cross-contamination through the barrel is not a concern. Use filtered tips for all nucleic acid work, PCR, and biohazardous samples; use standard tips for routine buffer and reagent dispensing.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li><a href="https://mbpinc.net/consumables/liquid-handling-products/pipette-tips/universal-fit-pipette-tips" title="Universal Fit Filter Tips">Universal Fit Filter Tips:</a> &ndash; Designed to fit a wide range of standard pipettes, with options including wide-bore, low-retention, sterile, RNase/DNase-free, and aerosol barrier formats to support diverse liquid handling applications while maintaining sample integrity.</li>
<li><a href="https://mbpinc.net/consumables/liquid-handling-products/filtered-pipette-tips/lts-compatible-filter-tips" title="LTS Compatible Filter Tips:">LTS Compatible Filter Tips:</a>&nbsp;Optimized for high-performance pipetting systems, featuring extended-length and rack-packed configurations for deep-vessel access, with bulk-pack options available to support reliable, high-throughput laboratory workflows.</li>
</ul>
<h2 dir="ltr"> How to Choose Filtered Pipette Tips</h2>
 Filter Material: Polyethylene Frit vs Cellulose Hydrophobic PE frits are the most common and most studied aerosol-barrier material; they block liquid ingress reliably without absorbing sample material or releasing fibres. Cellulose filters are used in some barrier tips (including the original Thermo Barrier tips); they are effective aerosol barriers but can absorb a small volume of aqueous sample, relevant at &le;10 &micro;L, where the absorbed volume is proportionally significant.
Universal Fit vs LTS-Compatible Filtered Tips Universal filtered tips use standard collar geometry (3.8 mm for &le;10 &micro;L, 6.1 mm for &le;200 &micro;L) and fit Eppendorf, Rainin Classic (non-LTS), and Thermo pipettes. LTS-compatible filtered tips use Rainin's cylindrical LTS mounting geometry and are required for Rainin LTS pipettes.&nbsp;
Low-Retention Filtered Tips Low-retention filtered tips combine an aerosol barrier with a hydrophobic inner tip wall, reducing liquid adhesion during dispensing. They are recommended for small-volume (&le;10 &micro;L) nucleic acid work, RNA, protein, and enzyme dispensing, where both contamination protection and volume accuracy are critical.
Volume Range Filtered tips are available across 10 &micro;L (P2&ndash;P10), 20 &micro;L (P20), 100 &micro;L (P100), 200 &micro;L (P200), 300 &micro;L, 1,000 &micro;L (P1000), and 1,250 &micro;L extended formats. Extended-length filtered tips reach deep into 15 mL and 50 mL conical tubes for nucleic acid elution and sample transfer steps.
Packaging Filtered tips are typically sterile-racked (96/rack, 10 racks/box); reload/refill formats are available for high-volume filter tip users.
<h2 dir="ltr"> Specifications Context</h2>
 Globe Scientific filter tips are certified free of human DNA, RNase, DNase, pyrogens, and PCR inhibitors; sterile, in flip-top or hinged racks. Sorenson Bioscience universal filter tips span 10&ndash;1,250 &micro;L in standard rack and EcoRack reload formats, pre-sterilised, DNase/RNase-free. Invitrogen Barrier Tips (Thermo Fisher) are the original reference for nucleic acid work with cellulose filter elements; compatible with Eppendorf pipettes. Globe Scientific, Nest Scientific, and Sorenson Bioscience filtered tips are stocked by MBP Inc.&nbsp; 
&nbsp;
Don&rsquo;t let cross-contamination stall your progress. <a href="https://mbpinc.net/contact-us" style="color: #236fa1;">Reach out to the MBP team</a> today for a quote or to find the perfect fit for your specific pipette brand.

Flyer

Globe Scientifc's Low Retention Filter Pipette Tips, Bulk

150900 by Globe Scientific are certified sterile low retention filter pipette tips combining aerosol and liquid barrier protection with a hydrophobic low-retention surface. Certified RNase-free, DNase-free, and pyrogen-free; universal fit for most popular pipettors. Packaged in autoclave-safe polypropylene flip-top boxes. Base SKU covers 0.1–10&#160;µL.

Manufacture

Filter Pipette Tip, 0.1 - 10uL, Certified, Universal, Low Retention, Graduated, 32mm, Natural, STERILE, 96/Rack, 10 Racks/Box, 2 Boxes/Carton

Filter Pipette Tip, 0.1 - 10uL, Certified, Universal, Low Retention, Graduated, 45mm Extended Length, Natural, STERILE, 96/Rack, 10 Racks/Box, 2 Boxes/Carton

Filter Pipette Tip, 1 - 20uL, Certified, Universal, Low Retention, Graduated, 50mm, Natural, STERILE, 96/Rack, 10 Racks/Box, 2 Boxes/Carton

Filter Pipette Tip, 1 - 100uL, Certified, Universal, Low Retention, Graduated, 50mm, Natural, STERILE, 96/Rack, 10 Racks/Box, 2 Boxes/Carton

Filter Pipette Tip, 1 - 200uL, Certified, Universal, Low Retention, Graduated, 59mm, Natural, STERILE, 96/Rack, 10 Racks/Box, 2 Boxes/Carton

Filter Pipette Tip, 1 - 300uL, Certified, Universal, Low Retention, Graduated, 59mm, Natural, STERILE, 96/Rack, 10 Racks/Box, 2 Boxes/Carton

Filter Pipette Tip, 1 - 1000uL, Certified, Universal, Low Retention, Graduated, 86mm, Natural, STERILE, 96/Rack, 10 Racks/Box, 2 Boxes/Carton

Filter Pipette Tip, 1 - 1000uL, Certified, Universal, Low Retention, Graduated, 105mm, Natural, Extended Length, STERILE, 96/Rack, 10 Racks/Box, 2 Boxes/Carton

Cluster Tubes

<h2 dir="ltr">What are Cluster Tubes?</h2>
 Cluster tubes are 1.2 mL polypropylene tubes arranged in either a 96-well individual format (96 tubes in a standard 96-well microplate-footprint rack) or an 8-strip format (8 tubes connected in a strip sized to fit one column of a 96-well block), used for multi-sample storage, screening, dilution series preparation, compound dispensing, and PCR-adjacent molecular biology workflows. Unlike 0.2 mL PCR strip tubes optimized for thin-wall thermal cycling, cluster tubes have a 1.2 mL per-tube volume, making them suited for master mix preparation, sample banking, cherry-picking for automation, and high-throughput assay staging where larger volumes per well are required. Polyethylene 8-cap strips close the tubes securely. Choose individual-format 96-well cluster tubes for sample banking and automated cherry-picking workflows; choose 8-strip cluster tubes for manual multi-sample preparation steps that mirror the 96-well column format.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Individual cluster tubes for flexible handling
</li>
<li dir="ltr" aria-level="1">
Racked cluster tube systems for organized storage
</li>
<li dir="ltr" aria-level="1">
Polypropylene cluster tubes for chemical resistance and durability
</li>
<li dir="ltr" aria-level="1">
Low-volume cluster tubes for micro-sample applications
</li>
<li dir="ltr" aria-level="1">
Tube and cap combinations for secure sealing
</li>
<li dir="ltr" aria-level="1">
Automation-compatible cluster tube formats for robotic systems
</li>
<li dir="ltr" aria-level="1">
Sterile and non-sterile cluster tube options
</li>
</ul>
<h2 dir="ltr">&nbsp;</h2>
<h2 dir="ltr">How to Choose Cluster Tubes</h2>
 Individual Tube vs. 8-Strip Format Individual 96-well cluster tube formats place 96 separate 1.2 mL PP tubes in a standard 96-well SBS-footprint rack with lid. Each tube can be individually removed, labeled, and stored &mdash; ideal for sample banking, cherry-picking, and hit-to-lead compound storage. The 8-strip format presents 8 connected 1.2 mL tubes in a strip that sits in one column of the same 96-well rack; strips cannot be separated into individual tubes for most formats. Sterile vs. Non-Sterile Sterile cluster tubes (gamma or E-beam sterilized, DNase/RNase-free certified) are required for cell-based assays, viral plaque assays, and any workflow where contamination invalidates the result. Non-sterile tubes are adequate for compound storage, buffer preparation, dilution series, and non-biological applications. Confirm whether your downstream assay requires sterile tubes before ordering bulk non-sterile stock. With or Without Rack and Lid Cluster tubes are available as tubes-only (bulk, no rack), with a 96-well polypropylene rack (with lid), or as pre-assembled rack-and-tube sets. For workflows using an automation liquid handler (Tecan, Hamilton, Beckman Coulter Biomek), the pre-racked format with SBS-footprint dimensions (127.76 &times; 85.48 mm) is required for instrument compatibility. Confirm your automation platform's deck footprint specification before ordering tubes-only formats. Cap Strip Compatibility Polyethylene 8-cap strips fit 1.2 mL cluster tubes and cluster tube strips, providing individual tube sealing. Caps must be purchased separately for most non-racked formats. For automated workflows requiring positive tube identification, 2D-barcoded tube options are available from specialty suppliers. Volume Considerations The 1.2 mL per tube is the standard cluster tube volume. The maximum working volume is approximately 1.0 mL. For applications requiring &gt;1 mL per well (deep-well culture, high-volume extraction), deep-well plates (2.0 mL per well, 96-well SBS format) are the appropriate format rather than cluster tubes. 
<h2> Specifications Context</h2>
 96-well cluster tubes are manufactured from polypropylene (PP) in standard 96-well SBS footprint (127.76 &times; 85.48 mm) racks with secure-fit polypropylene lids. Individual tube O.D. is designed to conform to standard 96-well position spacing (9 mm center-to-center), ensuring compatibility with 8-channel and 12-channel multi-channel pipettes. PP is chemically resistant to DMSO (commonly used in compound storage at up to 100%), ethanol, isopropanol, and most aqueous buffers. Cluster tubes are autoclavable at 121 &deg;C for reuse in sterile applications when new sterile tubes are not required. 96-well cluster tube system remains the dominant format for compound storage and sample banking in drug discovery and high-throughput screening (HTS) laboratories. 
&nbsp;
Choose MBP cluster tubes to keep high-volume work structured, simple, and easier to manage without losing control over individual samples. &nbsp;<a href="https://mbpinc.net/contact-us">Contact MBP </a>for bulk PO ordering and institutional pricing.

Globe Scientifc's Microtiter Cluster Tubes

Globe Scientific 110580 — polypropylene microtiter cluster tubes, 9×46 mm, 1.2 mL, natural (translucent), in a 96-well plate-compatible format. Non-sterile. 960 tubes per bag, 4,800 per case. Suited for compound storage, biobanking, and high-throughput screening workflows.

Tube, Microtiter Cluster, 9 x 46mm (1.2mL), PP, Natural, 960/Bag, 5 Bags/Unit , CS/4800

Tube, Microtiter Cluster, 9 x 46mm (1.2mL), PP, Natural, 96/Rack, 10 Racks/Unit , BOX/960

Cap Strip, PP, Natural, 8 Caps/Strip (For use with # 110580 & 110585 Tubes), BAG/600

Pipette Tips

<h2 dir="ltr">What Are Pipette Tips?</h2>
 Pipette tips are disposable polypropylene cones that attach to the shaft of an air-displacement pipette, forming the liquid-contact surface for aspiration and dispensing. The seal between the tip collar and the pipette shaft is the single most important factor in volumetric accuracy; a poorly fitting tip introduces systematic volume error that causes the instrument to deviate from its calibrated specification. Tips span micro volumes (0.1&ndash;10 &micro;L) through standard (20&ndash;200 &micro;L and 100&ndash;1,000 &micro;L) to high-volume (up to 1,250 &micro;L), with variants for filtered aerosol protection, low-retention liquid release, extended reach into deep vessels, and wide-bore dispensing of viscous samples.&nbsp;
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/liquid-handling-products/pipette-tips/universal-fit-pipette-tips" style="color: #236fa1;">Universal Fit Pipette Tips</a> &ndash; Available in volumes from 0.1 &micro;L to 5000 &micro;L, including low-retention and extended-length options, with sterile rack, bulk bag, and non-sterile refill formats.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/liquid-handling-products/filtered-pipette-tips/lts-compatible-filter-tips" style="color: #236fa1;">LTS Compatible Pipette Tips</a> &ndash; Feature PosiStop seals for use with Rainin-style pipettes and are offered with GreenRack systems, reload stacks, and empty rack frames.
</li>
</ul>
&nbsp;
<h2 dir="ltr">How to Choose Pipette Tips</h2>
 Collar Size and Pipette Compatibility Tip collar diameter determines fit: 3.8 mm collar for &le;10 &micro;L pipettes; 6.1 mm collar for &le;200 &micro;L; approximately 7.5&ndash;8.0 mm collar for P1000 pipettes. Universal fit tips use these standard collar sizes and are compatible with Eppendorf Research, Rainin Classic (non-LTS), Thermo Finnpipette, and Sartorius/BioHit. Rainin LTS and Eppendorf epT.I.P.S. use proprietary collar geometry and require instrument-specific tips. Filtered vs Non-Filtered Aerosol-barrier filter tips contain a hydrophobic PE or cellulose plug that blocks aerosol and liquid from reaching the pipette barrel; required for PCR, qPCR, and RT-PCR setup, RNA extraction, and work with biohazardous samples. Non-filter standard tips are appropriate for buffer, media, and reagent dispensing where cross-contamination through the barrel is not a concern. Low-Retention vs Standard Polypropylene Low-retention tips are injection-moulded from hydrophobic polypropylene with reduced surface energy or coated to minimise liquid adhesion on the inner wall. They improve accuracy at &le;10 &micro;L and for dispensing viscous, protein-containing, or organic solvent samples. Standard PP tips leave small residual volumes in the tip after dispensing; this residue is negligible at 200 &micro;L but significant at 2&ndash;5 &micro;L. Extended-Length and Wide-Bore Extended-length tips (also called long tips or gel-loading tips) reach into deep 15 mL and 50 mL tubes, cryovials, and electrophoresis gel wells. Wide-bore tips have an enlarged aperture for dispensing viscous samples, cell suspensions, and tissue lysates without shearing. Packaging Format Hinged 96-tip racks are standard for manual pipetting. Reload inserts fit into reusable rack bases to reduce per-tip cost and plastic waste. Bulk bags provide the lowest cost per tip for non-sterile applications.
&nbsp;
<h2 dir="ltr">Specifications Context</h2>
 Pipette tips are certified DNase-free, RNase-free, ATP-free, human DNA-free, PCR inhibitor-free, and pyrogen-free per independent lot testing. Virgin polypropylene free of additives, antistatic agents, and dyes is the standard material. ISO 8655 compliance for the pipette system depends on tip-pipette seal quality; confirm tip compatibility with your specific pipette model.&nbsp; Sorenson Bioscience universal and filtered tips, Globe Scientific, and Nest Scientific lines are stocked by MBP Inc.&nbsp;
&nbsp;
Not sure which tip fits your current project best?<a href="https://mbpinc.net/contact-us" style="color: #236fa1;"> The MBP team</a> is just a message away. We&rsquo;ll help you find the perfect match and get a quote headed your way.

Certified Pipette Tip - Brochure

Pipettors - Brochure

Globe Scientifi's 100 - 1250uL Standard Pipette Tips, Extended Length

151153 by Globe Scientific are 100–1250&#160;µL, 84&#160;mm extended length standard pipette tips certified free from human DNA, RNase, DNase, pyrogens, and PCR inhibitors. Universal fit, graduated, available in non-sterile bulk bags (1,000/bag), sterile or non-sterile racked (96/rack), or non-sterile reloading stacks. Extended reach suits deep vessels including 50&#160;mL conicals and deep-well plates.

Pipette Tip, 100 - 1250uL, Certified, Universal, Graduated, Natural, 84mm, Extended Length, 1000/Stand-Up Resealable Bag, CS/10000

Pipette Tip, 100 - 1250uL, Certified, Universal, Graduated, Natural, 84mm, Extended Length, 96/Rack, 6 Racks/Box, CS/5760

Pipette Tip, 100 - 1250uL, Certified, Universal, Graduated, Natural, 84mm, Extended Length, STERILE, 96/Rack, 6 Racks/Box, CS/5760

Pipette Tip, 100 - 1250uL, Certified, Universal, Graduated, Natural, 84mm, Extended Length, 96 Tips/Refill Plate, 5 Refill Plates/Box, CS/4800

Pipette Tip, 100 - 1250uL, Certified, Universal, Graduated, Blue, 84mm, Extended Length, 1000/Stand-Up Resealable Bag, CS/10000

Pipette Tip, 100 - 1250uL, Certified, Universal, Graduated, Blue, 84mm, Extended Length, 96/Rack, 6 Racks/Box, CS/5760

Pipette Tip, 100 - 1250uL, Certified, Universal, Graduated, Blue, 84mm, Extended Length, STERILE, 96/Rack, 6 Racks/Box, CS/5760

Pipette Tip, 100 - 1250uL, Certified, Universal, Graduated, Blue, 84mm, Extended Length, 96 Tips/Refill Plate, 5 Refill Plates/Box, CS/4800

Vortex Mixers

<h2>What are laboratory vortex mixers?</h2>
&nbsp;
A laboratory vortex mixer is a small benchtop instrument with an eccentrically rotating motor that drives a cup-shaped rubber head in a rapid circular path, creating a vortex in liquid-filled tubes or vessels pressed onto the cup. The vibration transfers through the closed tube wall to the liquid, generating a powerful swirling vortex that thoroughly mixes tube contents within seconds. Vortex mixers are used throughout the laboratory for resuspending pellets after centrifugation, mixing enzyme reaction components, homogenizing samples, dissolving compounds, and briefly but thoroughly mixing any small tube or vessel.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" style="font-family: arial, helvetica, sans-serif;" aria-level="1">
BLUline vortex mixer: with a flip-head for faster, touch-based mixing
</li>
<li dir="ltr" style="font-family: arial, helvetica, sans-serif;" aria-level="1">
BenchMixer&trade; vortex mixers: for everyday, reliable lab vortexing
</li>
<li dir="ltr" style="font-family: arial, helvetica, sans-serif;" aria-level="1">
BenchMixer&trade; XL multi-tube vortexer: for high-performance output sample processing
</li>
<li dir="ltr" style="font-family: arial, helvetica, sans-serif;" aria-level="1">
Labnet Orbit 300 multipurpose digital vortexer: for programmable and controlled mixing
</li>
<li dir="ltr" style="font-family: arial, helvetica, sans-serif;" aria-level="1">
Vortex mixer accessories: including horizontal heads, tube racks, and foam holders for different tube sizes and applications
</li>
</ul>
&nbsp;
<h2>How to choose a vortex mixer</h2>
&nbsp;
Choose touch-mode for ad hoc brief mixing and continuous-mode for timed runs
Touch-mode vortex mixers run only when a tube or vessel is pressed against the cup head, stopping immediately on release &mdash; the natural format for brief, on-demand mixing during pipetting workflows. Continuous-mode switches the mixer to run at a set speed without tube contact, suitable for timed mixing steps or when using a multi-tube adapter for batch runs.
Match vortex speed range to your application
Standard vortex mixers operate between approximately 600 and 3200 rpm, with lower speeds appropriate for gentle mixing of delicate samples or larger vessels, and full speed appropriate for vigorous resuspension of tightly packed pellets. Variable-speed models with a dial allow speed to be dialed down for sensitive applications.
Confirm tube compatibility with the cup head or adapter
The standard cup head on most vortex mixers accommodates 1.5 mL and 2 mL microcentrifuge tubes directly, and most standard tube formats up to approximately 50 mL can be mixed by holding the tube against the cup at the appropriate angle. For 15 mL and 50 mL conical tubes, holding at a slight angle rather than vertical provides more efficient mixing.
Consider a multi-tube foam insert for batch processing
Foam inserts and multi-tube adapters allow 6, 8, or more tubes to be mixed simultaneously during a timed continuous-mode run, suited for batch mixing of many samples between processing steps.
Check that footprint and noise level suit your bench placement
Vortex mixers vary considerably in physical footprint and operating noise; models with a suction-cup base or weighted housing reduce walking on the benchtop at high speed. For open-plan labs or shared spaces, noise level at full speed is worth checking in product specifications.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
The classic vortex mixing action produces a liquid vortex through eccentrically driven cup oscillation at typically 2000&ndash;3200 rpm for full-speed operation, a mechanism that has remained essentially unchanged since the Vortex-Genie design introduced by Scientific Industries in 1962. As of 2026, variable-speed vortex mixers with touch-mode and continuous-mode operation and a removable cup head for accessory attachment remain the most widely used format in molecular biology and biochemistry labs.
<a href="https://mbpinc.net/contact-us">Contact the MBP team today</a> to request a quote and find the right vortex mixer for your application.

Product Literature

Globe Scientific - Fixed Speed Vortex Mixer

GVM-FS by Globe Scientific is a fixed-speed vortex mixer that operates at 2500 rpm with a 4mm orbit, touch or continuous mode, and a cast aluminum base for stability. Available in 120V (US) with EU and UK plug variants sold separately.

Voltage

Power

Mixing Motion

Orbital diameter

Speed

Run Type

Dimensions (WxDxH)

Weight

Operating Temperature

Permissible Relative Humidity

Protection Class

Motor Type

Motor Rating Input

Motor Rating Output

Speed Range

Speed display

Warranty

Vortex Mixer, Fixed Speed, 120v, 60Hz, US Plug

Vortex Mixer, Fixed Speed, 230v, 50Hz, UK Plug

Vortex Mixer, Fixed Speed, 230v, 50Hz, EU Plug

Tube Replacement Cup, Rubber, for use with GVM Series Vortex Mixers (for Tubes and Vessels with a Diameter less than 30mm)

Vortexing Rod for use with Foam Tube Holders and GVM Series Vortex Mixer

Plate Adapter, Round, Universal, 100mm, for use with GVM Series Vortex Mixers (for use with Foam Tube Adapters and Dimpled Pad)

Tube Holder, Foam, for use with GVM Series Vortex Mixers, 48-Place, for 6mm Tubes (must use with Plate Adapter VM-AS-PLATE or Vortexing Rod VM-AS-ROD)

Tube Holder, Foam, for use with GVM Series Vortex Mixers, 15-Place, for 10mm Tubes (must use with Plate Adapter VM-AS-PLATE or Vortexing Rod VM-AS-ROD)

Tube Holder, Foam, for use with GVM Series Vortex Mixers, 12-Place, for 12mm Tubes (must use with Plate Adapter VM-AS-PLATE or Vortexing Rod VM-AS-ROD)

Tube Holder, Foam, for use with GVM Series Vortex Mixers, 8-Place, for 16mm Tubes (must use with Plate Adapter VM-AS-PLATE or Vortexing Rod VM-AS-ROD)

Dimpled Pad for use with GVM Series Vortex Mixers, 99mm Diameter (Must use with Top Plate VM-AS-PLATE)

Suction Foot, Rubber, with Screw, for use with GVM Series Vortex Mixers, 4 Each

Globe Scientific - Variable Speed Vortex Mixer

GVM-AS by Globe Scientific is a variable speed vortex mixer running 0-2500 rpm via analog dial, with a 4 mm orbital, cast aluminum IP21 chassis, and both touch and continuous run modes. Pairs with the GVM-AS-ADAPT foam holder series (requires GVM-AS-PLATE or GVM-AS-ROD coupling, sold separately) for multi-tube batch vortexing.

Vortex Mixer, Variable Speed, 120v, 60Hz, US Plug

Vortex Mixer, Variable Speed, 230v, 50Hz, UK Plug

Vortex Mixer, Variable Speed, 230v, 50Hz, EU Plug

Aspirating Pipettes

<h2 dir="ltr"> What Are Aspirating Pipettes?</h2>
 Aspirating pipettes are single-use polystyrene or polypropylene pipettes supplied without graduation marks or filter plugs, intended for vacuum-assisted removal of spent media, wash buffers, and supernatants from tissue culture vessels and plates. Their key distinction from serological pipettes is the absence of calibrated graduation marks &mdash; they are not used to measure volumes but to remove liquid efficiently and without contamination risk. They are used in conjunction with vacuum aspiration systems (benchtop vacuum pumps, Accuris ASPIRE) or handheld aspirators in cell culture workflows. Polystyrene construction is transparent for visual confirmation of aspiration; polypropylene Plasteur-type pipettes offer greater chemical resistance for non-standard reagents. Use aspirating pipettes for media removal; they are cheaper per unit, require no volume reading, and are optimised for rapid vacuum removal.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li data-section-id="1pu609k" data-start="25" data-end="115">Sterile 2 mL aspirating pipettes individually wrapped to help maintain sample integrity.</li>
<li data-section-id="1regcuz" data-start="116" data-end="221">Pipettes available without graduation printing for applications where volume markings are not required.</li>
<li data-section-id="1o281mm" data-start="222" data-end="305">No-plug aspirating pipette configurations for routine liquid transfer procedures.</li>
<li data-section-id="1hvosbt" data-start="306" data-end="417">Disposable aspirating pipettes supplied in multiple packaging quantities for laboratory workflow flexibility.</li>
<li data-section-id="ng4akd" data-start="418" data-end="526" data-is-last-node="">Globe Scientific aspirating pipettes suitable for general laboratory aspiration and liquid handling tasks.</li>
</ul>
<h2 dir="ltr"> How to Choose Aspirating Pipettes</h2>
 Diameter: 1 mL vs 2 mL vs Pasteur-equivalent 1 mL and 2 mL aspirating pipettes have narrow-bore tips suitable for aspirating from 96-well plates, 24-well plates, and culture dishes without disturbing cell monolayers. Larger-bore aspirating pipettes (equivalent to 10&ndash;25 mL serological body diameter) are used for rapid media removal from T-flasks and roller bottles. Pasteur-equivalent plastic aspirating pipettes replace glass Pasteur pipettes for routine vacuum aspiration without breakage risk. Individual Wrapping vs Bulk Packaging Individually wrapped aspirating pipettes maintain sterility per unit and are required for cleanroom and BSC work where contamination of unused pipettes would be unacceptable. Bulk-packed formats (100&ndash;200 per bag) reduce per-pipette cost for high-volume media removal workflows where the BSC environment maintains sterility adequately. Plastic/Plastic Wrap vs Paper/Plastic Wrap Plastic/plastic individually wrapped pipettes eliminate particulate generation from paper wrapping &mdash; recommended for workflows where paper fibres could contaminate sensitive cultures or downstream applications such as RNA extraction. Compatibility with Aspiration Systems Confirm the aspirating pipette outside diameter matches the vacuum aspiration system's cone adapter. Systems such as the Rainin QuickFlow, Integra VACUSAFE, and BrandTech BVC accept standard serological and aspirating pipette diameters; the Accuris ASPIRE uses 200&ndash;300 &micro;L pipette tip adapters for small-volume aspiration and Pasteur pipette adapters for larger volumes. Purity Certification Aspirating pipettes for cell culture and RNA work should be certified sterile, DNase-free, RNase-free, non-pyrogenic, and non-cytotoxic. These pipettes provide sterility assurance level, endotoxin-free assurance, non-cytotoxicity assurance, and RNase/DNase-free assurance with every case. 
<h2 dir="ltr"> Specifications Context</h2>
 Aspirating pipettes are manufactured from optically clear virgin polystyrene (standard) or polypropylene (Plasteur-type) in Class 100,000 cleanroom conditions. Sterility: individually wrapped pipettes are EO-sterilised to SAL 10⁻⁶. Purity certifications per lot: sterility, non-pyrogenic, non-cytotoxic, DNase-free, RNase-free. Globe Scientific and Nest Scientific are the leading reference brands in this category.&nbsp;
&nbsp;
Are you prepared to handle liquids more efficiently? For a rapid quote,&nbsp;<a href="https://mbpinc.net/contact-us" style="color: #236fa1;">contact the MBP team</a> right now. We're ready to assist you in finding the ideal solution for your lab.

Brochure

DataSheet - 1850

DataSheet - 1846

DataSheet - 1842

DataSheet - 1838

DataSheet - 1834

DataSheet - 1830

Globe Scientific Aspirating Pipettes

1830 by Globe Scientific are sterile aspirating pipettes molded from transparent polystyrene (PS), gamma-irradiated to SAL 10⁻⁶, non-pyrogenic, and individually wrapped. Available in six volumes from 1mL (SKU 1830) to 50mL (SKU 1850), they are designed for cell culture fluid aspiration, liquid transfer, and mixing where glass-free, disposable pipettes are required.

Aspirating Pipette, 1mL, PS, Standard Tip, 275mm, STERILE, No Printing, Individually Wrapped, Paper/Plastic, BOX/1000

Aspirating Pipette, 2mL, PS, Standard Tip, 275mm, STERILE, No Printing, Individually Wrapped, Paper/Plastic, BOX/800

Aspirating Pipette, 5mL, PS, Standard Tip, 342mm, STERILE, No Printing, Individually Wrapped, Paper/Plastic, BOX/300

Aspirating Pipette, 10mL, PS, Standard Tip, 345mm, STERILE, No Printing, Individually Wrapped, Paper/Plastic, BOX/200

Aspirating Pipette, 25mL, PS, Standard Tip, 345mm, STERILE, No Printing, Individually Wrapped, Paper/Plastic, BOX/200

Aspirating Pipette, 50mL, PS, Standard Tip, 345mm, STERILE, No Printing, Individually Wrapped, Paper/Plastic, BOX/100

Laboratory Balances Accessories

<h2>What Are Laboratory Balance Accessories?</h2>
&nbsp;
Laboratory balance accessories support accurate and traceable weighing by enabling routine balance calibration and performance verification. This category includes precision calibration weights for analytical balances, precision balances, high-capacity laboratory balances, and other laboratory weighing instruments. Available accessories include Globe Scientific Class E2, F1, and F2 calibration weights for calibration, verification, and quality control applications.
&nbsp;
<h2 class="PDq2pG_selectionAnchorContainer" data-start="0" data-end="23">What you will find:</h2>
&nbsp;
<ul data-start="25" data-end="495" data-is-last-node="" data-is-only-node="">
<li data-section-id="dhnqd2" data-start="25" data-end="112">Class E2 calibration weights for high-precision balance calibration and verification.</li>
<li data-section-id="zihc1" data-start="113" data-end="201">Class F1 calibration weights for routine calibration and quality control applications.</li>
<li data-section-id="6wu6g9" data-start="202" data-end="289">Class F2 calibration weights for general laboratory balance testing and verification.</li>
<li data-section-id="e46pwh" data-start="290" data-end="386">Calibration weights suitable for analytical, precision, and high-capacity laboratory balances.</li>
<li data-section-id="39rs8w" data-start="387" data-end="495" data-is-last-node="">Laboratory balance accessories designed to support accurate, reliable, and traceable weighing performance.</li>
</ul>
&nbsp;
<h2>How to Choose Laboratory Balance Accessories</h2>
&nbsp;
Calibration weight class selection
Select the calibration weight class recommended for your balance and laboratory quality requirements. Globe Scientific Class E2, F1, and F2 calibration weights are available for routine balance verification and calibration across a variety of laboratory weighing applications. Always verify the weight class specified by the balance manufacturer or your laboratory's quality management procedures.
Weight capacity
Choose calibration weights with nominal values appropriate for your balance's weighing range and calibration procedure. Laboratories commonly maintain multiple weight values to support routine verification across different balance capacities.
Calibration and quality systems
When balances are used in regulated or quality-controlled laboratories, calibration weights should be selected to support documented calibration and verification procedures. Follow your laboratory's quality requirements for calibration intervals and handling practices.
Handling and storage
Calibration weights should be handled carefully to preserve their accuracy. Store weights in their protective cases when not in use, avoid direct contact with bare hands whenever possible, and keep them clean and free from contamination to help maintain reliable weighing performance.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Calibration weights are manufactured to defined accuracy classes that support routine balance calibration and performance verification. Selecting the appropriate weight class and nominal weight values helps maintain measurement accuracy and traceability throughout the life of a laboratory balance. When comparing calibration weights, consider the applicable accuracy class, available weight values, material quality, protective storage case, and compatibility with your laboratory's calibration procedures. Proper handling, storage, and periodic recalibration help preserve long-term measurement reliability and support consistent weighing performance in research, analytical, quality control, and testing laboratories.
&nbsp;
To discuss product availability or get selection guidance, <a href="https://mbpinc.net/contact-us">contact the MBP team.</a>

Laboratory Balance Accessories

GB-E2-100G-Group-Weigh Dish Brochure

Globe Scientific Class E2 Calibration Weights

GB-E2-100G by Globe Scientific is a 100g stainless steel OIML Class E2 calibration weight supplied with a Statement of Accuracy and a foam-lined storage case. The E2 designation makes this weight suitable for calibrating Class F1 reference weight sets and verifying high-accuracy analytical balances. An optional ISO 17025:2017 calibration certificate is available for laboratories requiring fully traceable documentation. Available from MBP for labs across the USA and Canada.

Calibration Weight ,  100g, OIML Class E2, includes Statement of Accuracy

Calibration Weight ,  100g, OIML Class E2,  includes ISO 17025:2017 Cert. of Calibration

Calibration Weight ,  200g, OIML Class E2, includes Statement of Accuracy

Calibration Weight ,  200g, OIML Class E2,  includes ISO 17025:2017 Cert. of Calibration

Calibration Weight ,  50g, OIML Class E2, includes Statement of Accuracy

Calibration Weight ,  50g, OIML Class E2,  includes ISO 17025:2017 Cert. of Calibration

GB-F1-100G-Group-Weigh Dish Brochure

Globe Scientific Class F1 Calibration Weights

GB-F1-100G by Globe Scientific is a 100&nbsp;g OIML Class F1 stainless steel calibration weight supplied with a Statement of Accuracy and a foam-lined protective plastic case. Meets OIML R&nbsp;111 tolerances for Class F1. For ISO 17025:2017 accredited calibration certificate, order GB-F1-100G-C separately.

Calibration Weight ,  100g, OIML Class F1, includes Statement of Accuracy

Calibration Weight ,  100g, OIML Class F1,  includes ISO 17025:2017 Cert. of Calibration

Calibration Weight ,  1kg, OIML Class F1, includes Statement of Accuracy

Calibration Weight ,  1kg, OIML Class F1,  includes ISO 17025:2017 Cert. of Calibration

Calibration Weight ,  200g, OIML Class F1, includes Statement of Accuracy

Calibration Weight ,  200g, OIML Class F1,  includes ISO 17025:2017 Cert. of Calibration

Calibration Weight ,  2kg, OIML Class F1, includes Statement of Accuracy

Calibration Weight ,  2kg, OIML Class F1,  includes ISO 17025:2017 Cert. of Calibration

Calibration Weight ,  500g, OIML Class F1, includes Statement of Accuracy

Calibration Weight ,  500g, OIML Class F1,  includes ISO 17025:2017 Cert. of Calibration

Calibration Weight ,  5kg, OIML Class F1, includes Statement of Accuracy

Calibration Weight ,  5kg, OIML Class F1,  includes ISO 17025:2017 Cert. of Calibration

GB-F2-10KG-Group-Weigh Dish Brochure

Globe Scientific Class F2 Calibration Weights

GB-F2-10KG by Globe Scientific are OIML Class F2 stainless steel calibration weights for precision balance calibration and verification. Supplied with a Statement of Accuracy; optional ISO 17025:2017 accredited calibration certificate available. Stored in foam-lined protective cases.

Calibration Weight ,  10kg, OIML Class F2, includes Statement of Accuracy

Calibration Weight ,  10kg, OIML Class F2,  includes ISO 17025:2017 Cert. of Calibration

Calibration Weight ,  1kg, OIML Class F2, includes Statement of Accuracy

Calibration Weight ,  1kg, OIML Class F2,  includes ISO 17025:2017 Cert. of Calibration

Calibration Weight ,  20kg, OIML Class F2, includes Statement of Accuracy

Calibration Weight ,  20kg, OIML Class F2,  includes ISO 17025:2017 Cert. of Calibration

Calibration Weight ,  2kg, OIML Class F2, includes Statement of Accuracy

Calibration Weight ,  2kg, OIML Class F2,  includes ISO 17025:2017 Cert. of Calibration

Calibration Weight ,  500g, OIML Class F2, includes Statement of Accuracy

Calibration Weight ,  500g, OIML Class F2,  includes ISO 17025:2017 Cert. of Calibration

Calibration Weight ,  5kg, OIML Class F2, includes Statement of Accuracy

Calibration Weight ,  5kg, OIML Class F2,  includes ISO 17025:2017 Cert. of Calibration

2D Rockers

<h2>What are 2D rockers?</h2>
&nbsp;
2D rocking platforms produce a simple, rhythmic back-and-forth tilting motion on a single axis, causing liquid to flow alternately from one end of the platform to the other with each tilt cycle. The simplicity of this motion is its strength: a consistent linear sweep of liquid across the platform surface ensures even exposure of the membrane or gel to the incubation solution on every cycle, with no rotational bias that could cause uneven staining or antibody distribution. 2D rockers are the universal standard for western blotting workflows and gel processing because their motion is gentle, predictable, and highly effective at sweeping liquid uniformly across flat surfaces.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" style="text-align: left;" role="presentation">BenchBlotter Platform Rocker (Fixed Speed): Simple, reliable rocking for blotting, staining, and destaining.</li>
<li dir="ltr" style="text-align: left;" role="presentation">TubeRocker Compact Rocker (Grooved Mat): Secure mixing of 1.5&ndash;50 mL tubes with fixed speed and tilt.</li>
<li dir="ltr" style="text-align: left;" role="presentation">BenchRocker 2D Rocker (Variable Speed): Adjustable speed and tilt for flexible lab mixing applications.</li>
<li dir="ltr" style="text-align: left;" role="presentation">2D Everlast 247 Rocker: Continuous-duty operation, ideal for use in incubators and cold rooms.</li>
<li dir="ltr" style="text-align: left;" role="presentation">QuadRocker Tiered Rocker: A multi-level rocking system with over 750 sq. in. of usable surface area.</li>
<li dir="ltr" style="text-align: left;" role="presentation">Globe Scientific Fixed Speed Tube Rocker: Consistent fixed-speed mixing for 1.5&ndash;50 mL tubes.</li>
</ul>
&nbsp;
<h2>How to choose a 2D rocker</h2>
&nbsp;
Confirm the speed range covers your applications
2D rockers typically operate from 5 to 40 rpm, with most blotting applications running at 10&ndash;25 rpm. Some rockers are fixed-speed at a single rpm; variable-speed models provide flexibility to use slower speeds for gentle antibody incubation and faster speeds for wash steps. Confirm that the rocker's speed range accommodates all your planned protocols.
Select a platform size that fits your largest container
Platform size determines the maximum container dimensions: a 25 &times; 30 cm platform accommodates most standard blot boxes and gel staining dishes for common gel formats. For larger gel formats or when running multiple smaller containers simultaneously, a larger platform of 30 &times; 40 cm or more provides the necessary space.
Check the tilt angle adjustment if the rocker offers it
Some 2D rockers allow adjustment of the tilt angle as well as speed, which affects the aggressiveness of the liquid sweep. A larger tilt angle at the same speed produces a stronger sweep but may cause liquid to slosh more vigorously, risking splashing and membrane disturbance at higher angles. For standard antibody incubation, a moderate tilt angle of 10&ndash;20&deg; is typical.
Consider timer and programmable functions for unattended incubations
Some 2D rockers include a built-in timer that switches the rocker off after a set incubation time, preventing over-incubation when the user cannot monitor the step in real time. This is useful for overnight antibody incubations set to run at low speed inside a cold room or refrigerator.
Verify suitability for cold room or incubator use if needed
For overnight antibody incubations at 4&deg;C or hybridization at 37&deg;C or 65&deg;C, a rocker rated for the relevant temperature environment and humidity is required. Standard bench rockers are not always rated for cold room humidity or elevated incubator temperature.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
The 2D rocking platform's single-axis tilt produces a consistent, repeatable sweep pattern that has been validated in western blotting protocols across decades of use, making it the most protocol-tested agitation format in molecular biology. As of 2026, variable-speed 2D rockers with a digital display and built-in timer remain the standard configuration in most molecular biology labs where western blotting is performed routinely.
<a href="https://mbpinc.net/contact-us">Contact the MBP team</a> today to request a quote and find the right laboratory rocker for your application.

Globe Scientific Fixed Speed Tube Rocker

GTR-FS by Globe Scientific — single-tier fixed-speed tube rocker at 24&nbsp;rpm with ±25° oscillation. Handles 1.5&nbsp;mL to 50&nbsp;mL tubes on a 252&nbsp;×&nbsp;170&nbsp;mm ridged platform; 7&nbsp;lb load capacity, 6&nbsp;W, 120V. 2-year warranty. Choose GTR-2-FS for two-tier capacity.

Working Area

Maximum Load

Maximum Tilt Angle

Dimensions

Permissible relative Humidity

Tube rocker, single tier, 120v, 60Hz, US Plug, 9.9" x 6.7" platform, 24rpm

Tube rocker, double tier, 120v, 60Hz, US Plug, 9.9" x 6.7" platforms, 24rpm

PCR Plates

<h2 data-path-to-node="3">What Are PCR Plates?</h2>
 PCR plates are single-use, thin-wall polypropylene multi-well vessels designed for the thermal cycling demands of PCR, qPCR, RT-PCR, and genotyping. The 96-well format (12 columns &times; 8 rows) is the standard for most research and clinical labs; 384-well plates serve ultra-high-throughput applications. Well volumes are 0.2 mL (standard profile) for conventional block cyclers or 0.1 mL (low profile) for fast-block instruments. The skirt &mdash; the rigid plastic border surrounding the well array &mdash; determines automation compatibility, cycler lid clearance, and plate rigidity.&nbsp;
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li data-section-id="1xmdc3x" data-start="0" data-end="87"><a href="https://mbpinc.net/consumables/pcr-consumables/pcr-plates/semi-skirted-plates">Semi-skirted PCR plates: </a>for a balance of plate rigidity and instrument compatibility.</li>
<li data-section-id="y5pq2h" data-start="89" data-end="156"><a href="https://mbpinc.net/consumables/pcr-consumables/pcr-plates/hard-shell-pcr-plates">Hard shell PCR plates: </a>designed with a reinforced plate structure.</li>
<li data-section-id="8t808z" data-start="158" data-end="243"><a href="https://mbpinc.net/consumables/pcr-consumables/pcr-plates/skirted-pcr-plates">Skirted PCR plates:</a> featuring a full peripheral skirt for enhanced handling support.</li>
<li data-section-id="1d0aj4c" data-start="245" data-end="343" data-is-last-node=""><a href="https://mbpinc.net/consumables/pcr-consumables/pcr-plates/non-skirted-pcr-plates">Non-skirted PCR plates:</a> with a compact design for applications requiring minimal plate footprint.</li>
</ul>
&nbsp;
<h2 data-path-to-node="3">How to Choose PCR Plates</h2>
 Skirt Format Fully-skirted plates have a full-height ANSI/SBS-compliant border (127.76 &times; 85.47 mm footprint) and are required for robotic liquid handlers (Hamilton STAR, Tecan EVO, PerkinElmer JANUS) and automated stackers. Semi-skirted plates have a partial skirt providing enough rigidity for multichannel pipetting while maintaining thermal cycler block compatibility across a wider range of instruments. Non-skirted plates have no border and fit virtually any cycler block, including instruments whose compression lids would be obstructed by a full skirt. Well Profile: Standard vs Low-Profile Standard-profile 0.2 mL wells are used with conventional (tall) block cyclers. Low-profile 0.1 mL wells are required for fast-block instruments, including the Applied Biosystems QuantStudio, Bio-Rad CFX96 Fast, and Roche LightCycler 480, where the reduced well depth shortens the thermal path to the sample. Colour: Clear, White, or Black Clear plates allow visual inspection of well volumes and are the default for end-point PCR. White plates increase qPCR sensitivity in bottom-read optical systems by reflecting fluorescence emission back through the detector. Black plates reduce background fluorescence in probe-based assays where cross-well optical interference is a concern. Sealing Compatibility Skirted and semi-skirted plates seal reliably with adhesive films and heat sealers; the rigid skirt supports even film application and reduces edge-well evaporation. Non-skirted plates require cap mats or adhesive seals that adhere directly to the well rim. 
<h2 data-path-to-node="3"> Specifications Context</h2>
 PCR plates are moulded from virgin, low-extractable medical-grade polypropylene; well walls are uniformly thin (typically 0.25&ndash;0.35 mm) to maximise thermal conductivity. ANSI/SBS footprint standard (127.76 &times; 85.47 mm) applies to skirted plates for instrument interoperability. Plates are certified DNase-free, RNase-free, human DNA-free, and PCR inhibitor-free per lot. Cut corners (typically at H1/A12 position) and alpha-numeric well labelling aid plate orientation.Thermo Fisher SuperPlate skirted formats are the leading references for robotic applications; semi-skirted plates from Sorenson and equivalent lines serve the broad research market.&nbsp; 
<a href="https://mbpinc.net/contact-us">Connect with the MBP team </a>today to request a quote and find the perfect PCR plate configuration for your lab's specific needs.

<h2 data-path-to-node="1"> What Are Skirted PCR Plates?</h2>
 Skirted PCR plates are 96-well polypropylene thermal cycling plates with a full-height plastic border &mdash; the skirt &mdash; surrounding the well array. The skirt raises the overall plate height to match the ANSI/SBS microplate footprint standard (127.76 &times; 85.47 mm external dimensions), creating a uniform grip surface that robotic arms, plate grippers, and automated stackers can handle reliably. They are the required format for liquid-handling automation platforms and high-throughput PCR workflows where consistent plate positioning is critical. Choose fully skirted plates when your workflow involves robotic liquid handling, automated stackers, or plate readers requiring SBS-compliant positioning.
&nbsp;
<h2 data-path-to-node="4">What You Will Find: </h2>
<ul data-path-to-node="5">
<li>
Hard Shell 384-well PCR Plates<a href="https://www.google.com/search?q=https://mbpinc.net/product-category/consumables/pcr-consumables/pcr-plates/hard-shell-pcr-plates/" style="color: #000000;"> </a>&ndash; The industry standard for high-throughput screening and automated liquid handling.
</li>
<li style="color: #000000;">
Hard Shell 96-well PCR Plates &ndash; Combining rigidity with a 96-well format for routine yet high-precision workflows.
</li>
<li style="color: #000000;">
Globe Scientific Full Skirt PCR Plates &ndash; Reliable, automation-friendly plates designed for consistent thermal cycling.
</li>
<li style="color: #000000;">
Full Skirt PCR Plates<a _ngcontent-ng-c3793280901="" target="_blank" rel="noopener" externallink="" _nghost-ng-c3773094726="" jslog="197247;track:generic_click,impression,attention;BardVeMetadataKey:[[&quot;r_98f8600e63dbeb30&quot;,&quot;c_c4e8a23c27447c36&quot;,null,&quot;rc_fa92ce727d8e45fc&quot;,null,null,&quot;en&quot;,null,1,null,null,1,0]]" href="https://www.google.com/search?q=https://mbpinc.net/product-category/consumables/pcr-consumables/pcr-plates/skirted-pcr-plates/" class="ng-star-inserted" data-hveid="0" decode-data-ved="1" data-ved="0CAAQ_4QMahgKEwjZx-625v-TAxUAAAAAHQAAAAAQsAQ" style="color: #000000;"></a> &ndash; Features a full perimeter skirt for superior stability and easy gripping during automated handling.
</li>
<li style="color: #000000;">
96-well Duo Material PCR Plate&ndash; Engineered with dual-material technology to eliminate plate warping and bowing.
</li>
<li style="color: #000000;">
Skirted 96 Plate, Non-Sterile, Clear Polypropylene<a href="https://mbpinc.net/product/skirted-96-well-plate-28440-5" title="Skirted 96 Plate, Non-Sterile, Clear Polypropylene" style="color: #000000;"> </a>&ndash; A durable and cost-effective solution for high-volume lab processing.
</li>
</ul>
<h2 data-path-to-node="1"> How to Choose Skirted PCR Plates</h2>
 Well Profile: Low-Profile vs Standard Low-profile 0.1 mL wells are the current default for skirted qPCR plates; the reduced well depth minimises dead volume and supports faster thermal ramp rates on fast-block instruments, including Bio-Rad CFX96 Fast, Applied Biosystems QuantStudio, and Roche LightCycler 480. Standard-profile 0.2 mL wells are used with conventional tall-block cyclers and maximise reaction volume capacity. Colour: Clear, White, or Black Clear skirted plates are the standard for visual inspection and top-read fluorescence systems. White plates increase qPCR sensitivity by up to 2-fold on bottom-read optical configurations by reflecting fluorescence emission back through the detector. Black plates reduce inter-well optical crosstalk in probe-based assays where background fluorescence must be minimised. Two-Component vs One-Component Construction One-component (single polypropylene) skirted plates are cost-effective for general use. Two-component designs combine a polypropylene well array with a polycarbonate skirt to eliminate plate warping at high cycling temperatures, enabling precise robotic positioning even after repeated thermal stress. Barcoding Barcoded skirted plates support LIMS integration and automated sample tracking across multi-step workflows. Barcodes are typically laser-etched (permanent) or adhesive-applied; confirm barcode type before integrating with your lab information management system. Cut Corner Orientation A cut corner at the H1 position (standard) or A12 position aids correct plate orientation in cyclers and liquid handlers. Confirm the required cut corner with your instrument's loading specification. 
<h2 data-path-to-node="1"> Specifications Context</h2>
 Skirted PCR plates conform to ANSI/SBS (also called ANSI/SLAS 1-2004) footprint standards: 127.76 &times; 85.47 mm with 9 mm well spacing. Well walls are uniformly thin (0.25&ndash;0.35 mm) virgin polypropylene; maximum well volume with adhesive film seal is 0.2 mL for standard and 0.1 mL for low-profile formats. Certified DNase-free, RNase-free, human DNA-free, and PCR inhibitor-free per independent lot testing. Thermo Scientific SuperPlate are the leading references for demanding automation applications. Last updated: June 2026.
 If you need help picking the right plate for your system, <a href="https://mbpinc.net/contact-us" style="color: #236fa1;">the MBP team</a> can guide you based on your setup and workflow.

Skirted PCR Plates

Globe Scientific Full Skirt PCR Plates

PCR-FS-02 by Globe Scientific is a 96-well, 0.2 mL full-skirt PCR plate in high-clarity polypropylene, with ultra-thin walls, ultra-clear wells, and raised rims for secure adhesive or heat-seal film application. The SBS-format full skirt supports robotic plate handling and plate stacking. Certified DNase-free, RNase-free, Human DNA-free, and PCR inhibitor-free; optional barcoding available by special order. Order at mbpinc.net or contact customerservice@mbpinc.net.

0.2mL 96-Well PCR Plate, Full Skirt, Clear, 100/Cs

0.2mL 96-Well PCR Plate, Low Profile, Full Skirt, White, 100/Cs

384-Well PCR Plate, A24/P24 Two Notch design (Roche-style), Clear, 100/Cs

384-Well PCR Plate, A24/P24 Two Notch design (Roche-style), White, 100/Cs

384-Well PCR Plate, A24 Single Notch design (ABI-Style), Clear, 100/Cs

384-Well PCR Plate, A24 Single Notch design (ABI-Style), White, 100/Cs

<h2>What Are Semi-Skirted PCR Plates?</h2>
 Semi-skirted PCR plates have a partial plastic border extending approximately half the height of a fully skirted plate, surrounding part of the well array. This partial skirt adds enough structural rigidity to support multichannel pipetting. It provides a surface for labelling, while keeping the overall plate height low enough for compatibility with most thermal cycler compression lids that a full skirt would obstruct. Semi-skirted plates represent the most common format in routine qPCR and genotyping labs, where fully automated robotic handling is not required. Semi-skirted is the default choice for most routine PCR and qPCR labs that mix manual pipetting with occasional automated steps. 
&nbsp;
<h2 data-start="476" data-end="501">What you will find: </h2>
<ul data-start="502" data-end="1108">
<li style="color: #000000;" data-section-id="47u9b8" data-start="502" data-end="589">Hard shell 384-well PCR plates &ndash; enhanced rigidity for high-throughput applications</li>
<li style="color: #000000;" data-section-id="1oohzes" data-start="590" data-end="670">Semi-skirted, 96-well PCR plates &ndash; balanced design for routine PCR workflows</li>
<li style="color: #000000;" data-section-id="1n8sxu4" data-start="671" data-end="748">Hard Shell 96-well PCR plates &ndash; improved structural support and alignment</li>
<li style="color: #000000;" data-section-id="1gxz5rn" data-start="749" data-end="830">Globe Scientific Half Skirt PCR Plates &ndash; reliable option from a trusted brand</li>
<li style="color: #000000;" data-section-id="wcryl4" data-start="831" data-end="897">PCR Plates, Semi Skirt &ndash; versatile plates for standard lab use</li>
<li style="color: #000000;" data-section-id="dlek6q" data-start="898" data-end="985">96-well Duo Material PCR plate &ndash; optimized materials for performance and durability</li>
<li style="color: #000000;" data-section-id="4vb9o1" data-start="986" data-end="1108">Semi-Skirt 96 Plate, Clear Polypropylene, Non-Sterile &ndash; clear construction for visibility and general applications</li>
</ul>
<h2> How to Choose Semi-Skirted PCR Plates</h2>
 Well Profile and Volume Low-profile 0.1 mL semi-skirted plates are the standard for qPCR on fast-block instruments, including Bio-Rad CFX96, Applied Biosystems StepOnePlus, and Roche LightCycler 480. Standard-profile 0.2 mL wells work with conventional block cyclers and accommodate larger reaction volumes for cloning or high-concentration template workflows. Colour: Clear vs White Clear semi-skirted plates suit end-point PCR and top-read qPCR systems. White semi-skirted plates increase fluorescence signal in bottom-read qPCR optical configurations. Thermo Fisher offers white semi-skirted formats for this application. Cut Corner for Orientation Semi-skirted plates typically feature a notched or cut corner at the A12 position for plate orientation &mdash; a feature originating in sequencing plate formats and now standard across most qPCR-compatible semi-skirted plates. Confirm the cut corner position against your instrument's plate alignment specification. Sealing The partial skirt of semi-skirted plates supports adhesive film sealing and is compatible with most heat sealers. The skirt also reduces edge-well evaporation compared to non-skirted plates, improving Ct uniformity across plate positions. Robotic Compatibility Semi-skirted plates provide enough grip surface for some robotic arm designs and are listed as compatible with select liquid handlers; however, for demanding robotic workflows with gripper systems or conveyor belts, fully skirted ANSI/SBS-compliant plates remain the correct specification. 
<h2> Specifications Context</h2>
 Semi-skirted 96-well plates are moulded from virgin polypropylene with uniformly thin walls (0.25&ndash;0.35 mm) for consistent thermal conductivity. The partial skirt height is approximately 50% of a full ANSI/SBS skirt height, placing the plate between non-skirted and fully skirted in both rigidity and cycler compatibility. All plates are independently certified DNase-free, RNase-free, human DNA-free, and PCR inhibitor-free per lot.&nbsp; 
&nbsp;
Let <a href="https://mbpinc.net/contact-us">the MBP team&nbsp;</a>help you choose the right plate format to match your workflow and instrumentation.

Semi-Skirted Plates

Globe Scientific Half Skirt PCR Plates

PCR-HS-FL02 by Globe Scientific is a 96-well, 0.2mL ABI-style half skirt PCR plate with flat top, ultra-thin 0.2mm walls, raised well rims, and alphanumeric indexing. Certified DNase-free, RNase-free, Human DNA-free, PCR inhibitor-free, and pyrogen-free. USP Class VI and FDA 21 CFR 177.1520 compliant. Available from MBP with fast shipping across the USA and Canada.

0.2mL 96-Well PCR Plate, Half Skirt (ABI-style), Flat top, Clear, 100/Cs

0.2mL 96-Well PCR Plate, Half Skirt (ABI-style), Flat top, Assorted Colors (Blue, Red, Green, Yellow and Violet), 100/Cs

0.1mL 96-Well PCR Plate, Half Skirt (ABI-style), Flat top, Clear, 100/Cs

0.2mL 96-Well PCR Plate, Half Skirt (ABI-style), Ridged Rim, Clear, 100/Cs

0.1mL 96-Well PCR Plate, Low Profile, FAST, Half Skirt, Ridged Rim, Clear, 100/Cs

0.2mL 96-Well PCR Plate, Half Skirt, Clear, 100/Cs

0.1mL 96-Well PCR Plate, Half Skirt, Clear, 100/Cs

0.1mL 96-Well PCR Plate, Low Profile, Half Skirt (Light Cycler-style) White, 100/Cs

United States

Texas

mbpinc