Epigenetics

<h2>What are ChIP buffers?</h2>
&nbsp;
ChIP buffers are the aqueous formulations used at each stage of a chromatin immunoprecipitation protocol: cell lysis buffer disrupts the plasma membrane and releases nuclear content, nuclear lysis buffer solubilizes chromatin under conditions compatible with subsequent immunoprecipitation, sonication buffer maintains chromatin stability during shearing, ChIP dilution buffer reduces SDS concentration from the lysis buffer to allow antibody-antigen binding, sequential wash buffers with increasing ionic strength and detergent remove non-specifically bound chromatin while preserving the specific antibody-antigen-DNA complex, and elution buffer releases the captured complex from the antibody-bead resin before de-crosslinking.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">MN Digestion Buffer used in MNase-based workflows for enzymatic fragmentation of&nbsp; chromatin&nbsp;</li>
<li dir="ltr" role="presentation">Chromatin Shearing Buffer using sonification for chromatin disruption and preparation</li>
<li dir="ltr" role="presentation">5X MN Stop Buffer for the termination of enzymatic digestion reactions</li>
<li dir="ltr" role="presentation">Chromatin Dilution Buffer used in ChIP assays to provide optimized conditions for antibody binding&nbsp;</li>
<li dir="ltr" role="presentation">Chromatin Wash Buffer I, II, and III for background reduction and step-by-step non-specific binding removal&nbsp;</li>
<li dir="ltr" role="presentation">ChIP DNA Binding Buffer for purification and capture of immunoprecipitated DNA</li>
<li dir="ltr" role="presentation">5X Chromatin Elution Buffer for protein&ndash;DNA complexes recovery</li>
<li dir="ltr" role="presentation">5M NaCl for enhancing elution and chromatin stabilization</li>
<li dir="ltr" role="presentation">Nuclei Prep Buffer used before chromatin extraction for superior nuclear isolation</li>
</ul>
&nbsp;
<h2>How to use ChIP buffers</h2>
&nbsp;
Always add protease inhibitors to lysis and wash buffers immediately before use
Protease inhibitors must be added fresh to cell lysis and nuclear lysis buffers immediately before use, since most inhibitors are unstable in aqueous solution and lose activity quickly, and without them, nuclear proteases released during lysis will degrade histone tails and reduce ChIP enrichment of histone modifications.
Confirm SDS concentration is diluted before immunoprecipitation
High SDS in the nuclear lysis buffer is necessary for chromatin solubilization and sonication, but must be diluted approximately 10-fold using ChIP dilution buffer before antibody addition, since high SDS disrupts antibody-antigen binding and reduces immunoprecipitation efficiency.
Keep all buffers and chromatin on ice throughout the workflow after lysis
Chromatin prepared for ChIP is sensitive to non-specific interactions and protease activity after cell lysis, and maintaining samples at 4&deg;C throughout all lysis, sonication, immunoprecipitation, and wash steps minimizes these effects and preserves specificity of the enrichment.
Optimize wash buffer stringency to balance specificity against yield
ChIP wash buffers are applied sequentially at increasing ionic strength and detergent concentration to remove non-specifically bound chromatin; conditions too stringent can also strip the specific antibody-antigen-DNA complex from the beads, reducing yield, so optimization of wash conditions for each antibody-target combination improves performance.
Confirm elution buffer composition fits your downstream application
Standard ChIP elution buffers containing SDS and sodium bicarbonate release the protein-DNA complex and reverse crosslinks, but high SDS in the eluate can inhibit some NGS library preparation enzymes, making a DNA cleanup step after elution important before proceeding to library prep.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Protease inhibitor cocktails, added fresh to lysis buffers immediately before ChIP, are a standard component across kit formats and in-house protocols, since even brief protease activity can compromise histone modification detection by degrading the histone tails that ChIP antibodies recognize. As of 2026, ChIP buffer formulations compatible with low-input chromatin and NGS library preparation continue to be optimized for primary cell and tissue ChIP workflows.
<a href="https://mbpinc.net/contact-us">Contact the expert team </a>at MBP and request a quote today to get high-quality ChIP buffers for your lab.

Buffers

MSDS

Nuclei Prep Buffer

D5220-2 by Zymo Research is Nuclei Prep Buffer for chromatin immunoprecipitation (ChIP). Used at 500 µl (with protease inhibitors) to resuspend cross-linked cell pellets before chromatin shearing. Compatible with Zymo-Spin ChIP Kit (D5209, D5210). Store at room temperature. Available in 30 mL and 50 mL.

Manufacturer

Shipping Condition

Storage Condition

Nuclei Prep Buffer (50 ml)

Nuclei Prep Buffer (30 ml)

<h2>What are non-bisulfite methylation kits and reagents?</h2>
&nbsp;
Non-bisulfite methylation kits and reagents are alternatives to sodium bisulfite conversion that achieve the same goal &mdash; distinguishing methylated from unmethylated cytosines at single-base or regional resolution &mdash; without the harsh chemical treatment that bisulfite introduces. The most widely adopted approach is enzymatic methyl-seq (EM-seq), which uses TET2 to oxidize 5-methylcytosine and 5-hydroxymethylcytosine and T4-BGT to protect them from subsequent APOBEC3A-mediated deamination, so that only unmodified cytosines are converted to uracil.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">qMethyl PCR assay kit uses PCR amplification for quantitative DNA methylation detection</li>
<li dir="ltr" role="presentation">One-step qMethyl PCR system for efficient methylation analysis and optimized workflow setup&nbsp;</li>
<li dir="ltr" role="presentation">Test reaction premixes for validation and optimization of assays&nbsp;</li>
</ul>
&nbsp;
<h2>How to choose non-bisulfite methylation reagents</h2>
&nbsp;
Choose EM-seq for superior library quality over bisulfite at the same resolution
EM-seq outperforms bisulfite-converted libraries on all major quality metrics: higher library yield, fewer duplicates, more usable reads, more even GC distribution, and accurate methylation calling, without requiring any changes to downstream bioinformatic analysis pipelines since the output is the same C-to-T chemistry as bisulfite conversion.
Understand EM-seq's two-step enzymatic mechanism
In the first EM-seq step, TET2 oxidizes 5-mC and 5-hmC to protected forms while T4-BGT glucosylates 5-hmC; in the second step, APOBEC3A deaminates only the unprotected unmodified cytosines to uracil. The net result is the same as bisulfite conversion &mdash; unmethylated C reads as T &mdash; but without bisulfite's destructive chemistry.
Consider TAPS for mild, nondestructive conversion that directly marks modified cytosines
TET-assisted pyridine borane sequencing (TAPS) is a bisulfite-free method that combines TET oxidation of 5-mC and 5-hmC with pyridine borane reduction, converting modified cytosines to a thymine read while leaving unmodified cytosines intact. Unlike bisulfite and EM-seq, TAPS positively marks the modified bases rather than converting the unmodified ones, and can preserve DNA fragments over 10 kilobases.
Choose MeDIP for genome-wide enrichment without per-cytosine resolution
Methylated DNA immunoprecipitation uses an antibody specific to 5-methylcytosine or 5-hydroxymethylcytosine to pull down methylated DNA fragments, providing regional enrichment data at lower cost and without bisulfite-related DNA damage, though at lower resolution than sequencing-based conversion methods.
Confirm whether your method distinguishes 5-mC from 5-hmC or co-detects both
EM-seq detects both 5-mC and 5-hmC together and cannot distinguish them without additional steps, while TAPS also co-detects both; TAPS&beta;, a variant, can specifically call 5-mC by blocking 5-hmC before oxidation. MeDIP can be targeted specifically to 5-hmC (hMeDIP) using an anti-5-hmC antibody.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
EM-seq was effective using as little as 100 pg of DNA input, and libraries showed higher yields with fewer PCR cycles than bisulfite-converted libraries at all input amounts tested, with more even GC distribution, reduced sequencing duplicates, and more CpGs detected within genomic features per sequencing read. As of 2026, enzymatic conversion via EM-seq is broadly recommended over bisulfite conversion for new methylome analysis projects, particularly those working with limited, degraded, or high-value samples where the DNA damage of bisulfite treatment is most consequential.
This category sits within DNA/RNA Methylation, alongside Bisulfite Conversion Kits, and is closely related to DNA Hydroxymethylation for 5-hmC-specific approaches. See the full reagents catalog and use Quick Order for recurring orders.
<a href="https://mbpinc.net/contact-us" title="Contact the expert team at Molecular Biology Products Inc. (MBP)">Contact the expert team at Molecular Biology Products Inc. (MBP)</a> to find dependable non-bisulfite kits and reagents for your lab.

Non-Bisulfite Kits & Reagents

Protocol

OneSTEP PLUS qMethyl PCR (96 Rxns.)

D5312 by Zymo Research quantifies DNA methylation at user-defined loci without bisulfite conversion, using MSRE-based real-time PCR. Percent methylation is calculated as 100 × 2−ΔCt from 5 ng–1 µg of unmodified genomic DNA per reaction, detecting methylation levels as low as ~1–5%. Compatible with Bio-Rad CFX96 and similar real-time PCR instruments (SYBR Green or TaqMan). Stored at −20°C.

Compatible

Detection Dye

Input

Processing Time

Storage

<h2>What are epigenetics NGS library preparation kits?</h2>
&nbsp;
Epigenetics NGS library preparation kits convert the DNA output of an upstream epigenetics workflow into an indexed sequencing library: adapters are ligated to the ends of each DNA fragment, an optional amplification step increases the total amount of library, and indexes are added to allow multiplexed sequencing of many samples in a single run. These kits are specifically optimized for epigenetics-specific inputs, including ChIP-enriched DNA (often low-yield, sheared to 200&ndash;750 bp), chromatin-accessible DNA from ATAC-seq (also low-yield and fragmented), and bisulfite-converted DNA (fragmented and chemically modified, with low-complexity sequence).
&nbsp;
<h2 dir="ltr">What You Will Discover:</h2>
&nbsp;
<ul>
<li dir="ltr">Groundbreaking single-tube processes that integrate bisulfite conversion and library preparation to chart entire genomes with extremely low input needs.</li>
<li dir="ltr">Rapid, efficient transposase-driven methods that seize open chromatin areas and dynamic regulatory environments in only a few hours.</li>
<li dir="ltr">Enzymatic restriction methods combined with targeted sequencing for affordable, high-density CpG coverage without incurring full-genome expenses.</li>
<li dir="ltr">Advanced multi-adapter ligation techniques designed to reduce bias and optimize library retrieval from fragmented or challenging DNA sources.</li>
<li dir="ltr">Post-bisulfite library preparation systems designed explicitly for sub-nanogram DNA quantities, individual cells, or extensively degraded specimens.</li>
<li dir="ltr">Locus-specific, genome-wide enrichment approaches aimed at accurately monitoring and characterizing 5-hydroxymethylcytosine alterations throughout the genome.</li>
</ul>
&nbsp;
<h2>How to choose epigenetics NGS library preparation kits</h2>
&nbsp;
Match your library prep kit to your specific epigenetics input type
ChIP-seq library prep kits are optimized for low-yield sheared chromatin enriched by immunoprecipitation, while ATAC-seq kits work with tagmented open chromatin fragments, and bisulfite or enzymatic methyl-seq library prep kits are specifically formulated for the highly fragmented, low-complexity sequence characteristics of bisulfite-converted DNA input.
Confirm the kit supports your input DNA amount
ChIP experiments, especially those targeting low-abundance transcription factors or run from limited cell numbers, often yield very little enriched DNA, and kits validated for low-input or picogram-scale library preparation are necessary to generate libraries with sufficient complexity without excessive PCR amplification introducing duplicates.
Choose an indexing strategy appropriate to your sample multiplexing plan
Dual-index strategies, using unique combinations of two distinct index sequences per sample, provide more reliable sample demultiplexing in highly multiplexed runs compared with single-index strategies, and confirming whether your kit supports the number of samples and multiplexing depth required is an important selection criterion.
Understand the impact of PCR cycles on library complexity and duplicate rate
Fewer PCR amplification cycles reduce the proportion of duplicate reads in sequencing data, which is especially important for low-complexity epigenetics libraries where overamplification can dominate output with copies of the same original fragment. Efficient ligation chemistry that increases library yield from low input helps minimize required PCR cycles.
Confirm kit compatibility with your downstream analysis pipeline
Some library prep protocols use specific adapter sequences or library structures that require corresponding adjustments in bioinformatics analysis pipelines, and confirming compatibility before sequencing helps avoid downstream analysis failures.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
ChIP-seq library prep kits optimized for low-input or ultra-low-input chromatin are designed to achieve high library complexity from picogram-scale DNA inputs that would otherwise produce low-complexity libraries with standard kits at similar PCR cycle numbers. As of 2026, library prep kits compatible with enzymatic methyl-seq (EM-seq) as well as classical bisulfite-converted DNA continue to expand, enabling researchers to leverage improved DNA quality while maintaining familiar downstream sequencing workflows.
Prepared to enhance your sequencing efficiency? Discover our complete selection of NGS Library Preparation Kits and <a href="https://mbpinc.net/contact-us">contact the MBP team</a> for a quote now.

NGS Libray Preparation Kits

DataSheet

Pico Methyl-Seq™ Library Prep Kit

The Pico Methyl-Seq Library Prep Kit (D5455) by Zymo Research enables whole-genome bisulfite sequencing from as little as 10 pg of input DNA, with a ligation-free, gel-free workflow compatible with FFPE and cfDNA samples for Illumina sequencing.

Equipment

Sample Source

Sequencing Compatibility

Pico Methyl-Seq™ Library Prep Kit (10 Preps.)

Pico Methyl-Seq™ Library Prep Kit (25 Preps.)

<h2>What are 5-hmC ELISA kits?</h2>
&nbsp;
5-hmC ELISA kits are antibody-based assays formulated specifically to quantify 5-hydroxymethylcytosine, the oxidized derivative of 5-methylcytosine produced by TET family enzymes, in a genomic DNA sample. The assay typically uses denatured single-stranded DNA coated on a plate well, recognized by an anti-5-hmC primary antibody and developed with an HRP-conjugated secondary antibody for a colorimetric readout proportional to the global level of 5-hmC in the sample.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">DNA hydroxymethylation ELISA assay kits for 5-hmC levels quantification</li>
<li dir="ltr" role="presentation">DNA methylation ELISA kits for comparative gene regulation analysis and measurement of 5-mC&nbsp;</li>
<li dir="ltr" role="presentation">DNA standards for accurate methylation and hydroxymethylation quantification&nbsp;</li>
<li dir="ltr" role="presentation">Control DNA sets and assay controls for experimental accuracy, validation, and reproducibility</li>
<li dir="ltr" role="presentation">HRP-based antibodies for the specific detection in ELISA workflows</li>
<li dir="ltr" role="presentation">ELISA coating and reaction buffers for enhanced assay performance and setup</li>
<li dir="ltr" role="presentation">Signal development reagents for quantitative readout and chemiluminescent or colorimetric detection</li>
</ul>
&nbsp;
<h2>How to use 5-hmC ELISA kits</h2>
&nbsp;
Confirm 5-hmC is detectable at relevant levels in your cell type or tissue
5-hmC is most abundant in neurons and embryonic stem cells, where it can constitute up to 20% of total modified cytosines in neuronal DNA, while most cultured cell lines have much lower 5-hmC levels that may fall below a plate-based antibody assay's reliable detection limit. Checking published 5-hmC abundance for your specific cell type helps confirm whether ELISA-level detection is appropriate before committing samples to the assay.
Use a set of mixed methylation standards to build a calibration curve
Running defined mixtures of 5-hmC-containing and unmethylated DNA at known ratios generates a standard curve that lets you convert the raw absorbance signal to an actual global hydroxymethylation percentage, since the assay signal alone cannot be interpreted as an absolute level without this calibration.
Confirm your antibody's specificity for 5-hmC versus 5-mC
Anti-5-hmC antibodies used in these kits are selected for specificity to 5-hydroxymethylcytosine rather than 5-methylcytosine, but published cross-reactivity data for the specific antibody in your kit is worth checking, particularly when studying sample types where both marks are present at similar levels.
Plan your experimental design to include appropriate negative and positive controls
Including a negative control (unmethylated DNA, expected to give background-level signal) and a positive control (5-hmC-containing DNA of known level) in every plate confirms the assay is performing as expected and catches plate-to-plate variability before it affects result interpretation.
Understand ELISA gives global level, not locus-specific 5-hmC information
A 5-hmC ELISA measures the average hydroxymethylation level across all DNA in the sample; it does not reveal which specific CpG sites carry 5-hmC, which requires hMeDIP-seq or TAB-seq for regional or base-level resolution respectively.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Anti-5-hmC antibodies used in ELISA formats are validated specifically for 5-hydroxymethylcytosine and selected for minimal cross-reactivity with 5-methylcytosine, since distinguishing these two modifications is the primary purpose of a dedicated 5-hmC assay rather than a general methylation assay. As of 2026, 5-hmC ELISA kits remain a standard first-pass tool in studies where many samples need to be screened for differences in global hydroxymethylation level before committing a smaller subset to high-resolution sequencing methods.
<a href="https://mbpinc.net/contact-us">Contact the expert team</a> at Molecular Biology Products Inc. (MBP) and find reliable ELISA kits and reagents for your lab.

ELISA Kits & Reagents

Quest 5-hmC™ DNA ELISA Kit

The Quest 5-hmC™ DNA ELISA Kit (D5425) by Zymo Research quantifies global 5-hydroxymethylcytosine in 20–200 ng of genomic DNA per well with a sensitivity of ≥0.02% 5-hmC per 100 ng input. The 96-well colorimetric assay completes in 3 hours and is compatible with vertebrate, plant, and microbial DNA, as well as enzyme-digested and sheared fragments.

Detection

Quest 5-hmC™ DNA ELISA Kit (96 Preps.)

Quest 5-hmC™ DNA ELISA Kit (2 x 96 Preps.)

<h2>What are bisulfite conversion reagents and buffers?</h2>
&nbsp;
Bisulfite conversion reagents include sodium bisulfite solution, denaturation and conversion buffers, and complete kits that bundle all components needed for the three-step chemical reaction: sulfonation of cytosine to a cytosine-bisulfite derivative, hydrolytic deamination to a uracil-bisulfite derivative, and alkali desulfonation to yield uracil. This process converts unmethylated cytosines to uracil while leaving 5-methylcytosine intact and unconverted, because 5-methylcytosine resists bisulfite-mediated deamination under standard conditions.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">RNA and DNA conversion reagents for enhanced modification of cytosine in methylation workflows</li>
<li dir="ltr" role="presentation">Desulphonation buffers for stabilization of nucleic acids and post-conversion cleanup&nbsp;</li>
<li dir="ltr" role="presentation">Binding buffers used during purification for efficient capture of converted RNA and DNA</li>
<li dir="ltr" role="presentation">Wash buffers for the removal of inhibitors and improved purity of samples</li>
<li dir="ltr" role="presentation">Elution buffers for high-quality recovery of converted nucleic acids</li>
<li dir="ltr" role="presentation">DNA denaturing and digestion buffers for controlled workflow and optimized conversion efficiency</li>
<li dir="ltr" role="presentation">Dilution and reaction buffers for maintaining stable assay conditions</li>
<li dir="ltr" role="presentation">Solubilization and dissolution buffers for sample processing and preparation&nbsp;</li>
<li dir="ltr" role="presentation">Lightning conversion reagents for efficient and rapid methylation analysis workflows</li>
</ul>
&nbsp;
<h2>How to use bisulfite conversion reagents</h2>
&nbsp;
Ensure complete DNA denaturation before conversion to avoid incomplete conversion
Bisulfite only acts on cytosines in single-stranded DNA, so complete denaturation of the input DNA is the most critical first step, since failure to fully denature can leave double-stranded regions in which cytosines are shielded from the bisulfite reagent and remain unconverted.
Understand that incomplete conversion produces false-positive methylation results
If the conversion is incomplete, unconverted unmethylated cytosines will read as cytosine after sequencing, which will be incorrectly interpreted as methylated cytosine, artificially inflating the apparent methylation level of the sample in a false-positive direction.
Optimize conversion conditions to balance completeness against DNA degradation
The harsh conditions needed for complete bisulfite conversion, including high bisulfite concentration, elevated temperature, and long incubation, also fragment and degrade DNA, and optimizing conditions that achieve high conversion while minimizing degradation is a key technical challenge in bisulfite workflows.
Include an unmethylated conversion control to estimate residual incomplete conversion
Including an unmethylated control DNA, such as lambda phage DNA, in the same conversion reaction provides a readout of how completely unmethylated cytosines were converted, helping quantify residual incomplete conversion rates and account for them in downstream analysis.
Be aware of specific challenges for FFPE and degraded DNA samples
Formalin-fixed, paraffin-embedded tissue DNA is already fragmented before bisulfite treatment, and the additional fragmentation during conversion can result in poor library yields; specific modified protocols and carrier reagents can help reduce further degradation during the conversion step.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Bisulfite sequencing is widely regarded as the gold standard for DNA methylation analysis due to its high resolution and accuracy at single-base level, but it also introduces specific DNA quality challenges for downstream library preparation and sequencing, particularly for samples already of poor quality like FFPE tissue. As of 2026, enzymatic conversion is increasingly recommended as the preferred alternative to bisulfite conversion specifically because it achieves comparable discrimination between methylated and unmethylated cytosines while minimizing the DNA damage and library complexity loss that harsh bisulfite chemistry introduces.
This category sits within DNA/RNA Methylation under Epigenetics, and for a synthetic, fully methylated positive control to run through the conversion workflow, see dNTPs (Deoxynucleotide Triphosphates). See the full reagents catalog and use Quick Order for recurring orders.
<a href="https://mbpinc.net/contact-us">Contact the expert team</a> at MBP and request a quote today to get high-quality bisulfite conversion reagents for your lab.

Bisulfite Conversion Reagents & Buffers

RNA Conversion Reagent (1.5 ml)

RNA Conversion Reagent R5001-1-1 by Zymo Research is a 1.5 ml ready-to-use bisulfite conversion reagent sold as a standalone replacement component for the EZ RNA Methylation Kit (R5001, R5002). It converts unmethylated cytosines to uracil while preserving 5-methylcytosine for RNA methylation analysis. Stored at room temperature.

RNA Desulphonation Buffer

RNA Desulphonation Buffer by Zymo Research is available in 10 ml (R5001-3-10) and 40 ml (R5001-3-40) formats for in-column desulphonation of bisulfite-converted RNA, stored at room temperature. Compatible with the EZ RNA Methylation Kit (R5001, R5002) for epitranscriptomic RNA methylation analysis; sold as a standalone replenishment reagent. MBP is a registered vendor for Howard Hughes Medical Institute, Vanderbilt University, MD Anderson Cancer Center, and many more leading research institutes, serving labs across the United States, Canada, and internationally.

RNA Desulphonation Buffer (10 ml)

RNA Desulphonation Buffer (40 ml)

RRHP 5-hmC Library Prep Kit

The RRHP 5-hmC Library Prep Kit (D5450) by Zymo Research enables reduced representation hydroxymethylation profiling of 5-hmC in 12 reactions, using an enzymatic—not bisulfite—approach for genome-wide 5-hmC mapping compatible with Illumina HiSeq and MiSeq platforms.

Equipment Required

RRHP™ 5-hmC Library Prep Kit (12 Preps.)

RRHP™ 5-hmC Library Prep Kit (25 Preps.)

<h2>What are ELISA kits for methylation in this category?</h2>
&nbsp;
ELISA kits for DNA and RNA methylation in this category are antibody-based assays that quantify the global level of a specific epigenetic mark, most commonly 5-methylcytosine in genomic DNA, 5-hydroxymethylcytosine in genomic DNA, or N6-methyladenosine in RNA, using a plate-based immunoassay format without requiring bisulfite conversion or sequencing. Denatured, single-stranded DNA or RNA from a sample is coated on a plate well, and a mark-specific primary antibody followed by an HRP-conjugated secondary antibody generates a colorimetric signal proportional to the level of the target modification.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">5-mC DNA ELISA kits for quantitative analysis of DNA methylation&nbsp;</li>
<li dir="ltr" role="presentation">DNA controls for validation and calibration of the assay to ensure experimental&nbsp; reproducibility and accuracy&nbsp;</li>
<li dir="ltr" role="presentation">Secondary antibody reagents for specific signal generation and detection in ELISA assays</li>
<li dir="ltr" role="presentation">Coating buffers for consistent assay performance and optimized plate preparation&nbsp;</li>
</ul>
&nbsp;
<h2>How to choose methylation ELISA kits and reagents</h2>
&nbsp;
Match your kit to the specific epigenetic mark you're quantifying
Different kits use antibodies against specific modifications: 5-methylcytosine ELISA kits quantify global DNA methylation, 5-hmC ELISA kits quantify global hydroxymethylation, and m6A ELISA kits quantify RNA N6-methyladenosine. Using a kit with the wrong antibody specificity will not report the mark you intend to measure.
Use methylation standards to build a calibration curve for quantitative results
Running a series of methylation standards with defined percentages alongside your samples allows the absorbance readout to be converted to a specific, meaningful methylation percentage, since the raw ELISA signal alone cannot be interpreted as absolute methylation level without a calibration.
Understand that ELISA measures global levels, not locus-specific methylation
A methylation ELISA gives the overall average percentage of methylation across the genome in a sample, which is useful for comparing broad methylation changes between conditions but cannot identify which specific genes or regions are differentially methylated the way bisulfite sequencing can.
Confirm the required DNA denaturation step is appropriate for your sample type
ELISA kits for DNA methylation typically require single-stranded, denatured DNA coated directly on the plate, and confirming this denaturation step is properly performed is necessary for consistent antibody binding and reproducible signal across wells.
Be aware of cross-reactivity with similar modifications when interpreting results
An antibody against 5-methylcytosine may have some cross-reactivity with 5-hydroxymethylcytosine, and confirming the antibody's published cross-reactivity data helps interpret whether your signal specifically reflects 5-mC, 5-hmC, or both, which matters for studies in cell types where 5-hmC is abundant.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
The 5-methylcytosine ELISA workflow uses an indirect ELISA methodology where denatured, single-stranded DNA samples are coated directly on the plate well surfaces and a 5-mC monoclonal antibody and an HRP-conjugated secondary antibody are added sequentially, generating a colorimetric signal proportional to the total level of methylated cytosine in the sample. As of 2026, methylation ELISA kits are particularly valued for high-throughput screening studies comparing global methylation levels across many treatment conditions or patient groups where single-base-resolution data is not the primary goal.
This category sits within DNA/RNA Methylation, alongside Methylation Standards for calibration, and is related to DNA Hydroxymethylation and Non-Bisulfite Kits &amp; Reagents for higher-resolution methylation analysis. See the full reagents catalog and use Quick Order for recurring orders.
<a href="https://mbpinc.net/contact-us">Contact the expert team of&nbsp; Molecular Biology Products Inc. (MBP)</a> to get high-quality ELISA Kits and Reagents for your lab.

Secondary Antibody

D5325-3-15 by Zymo Research is the HRP-conjugated Secondary Antibody for use with the 5-mC DNA ELISA Kit (D5325/D5326), supplied in a 15 µl volume. It detects the anti-5-methylcytosine monoclonal antibody (Clone 7D21) in the colorimetric quantitation of global DNA methylation at 405 nm, with assay sensitivity &gt;0.5% 5-mC per 100 ng DNA. Available for individual component replenishment; store at −20 °C.

Secondary Antibody (1 µg/µl) (15 µl)

Secondary Antibody (1 µg/µl) (30 µl)

<h2>What are methylation standards?</h2>
&nbsp;
Methylation standards are defined reference DNA materials with a known and confirmed methylation status, ranging from a fully methylated DNA (where every cytosine at CpG or other sites carries a methyl group) to a fully unmethylated DNA (where no cytosines are methylated) and intermediate or mixed standards containing a defined ratio of the two. The most widely used unmethylated control in bisulfite sequencing is lambda phage DNA, which is naturally unmethylated and can be spiked into a conversion reaction to estimate conversion efficiency.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Methylated and non-methylated DNA control sets for comparative epigenetic analysis and assay validation</li>
<li dir="ltr" role="presentation">Universal methylated DNA standards for methylation assessment workflows</li>
<li dir="ltr" role="presentation">Genomic DNA reference materials: for microbial and human methylation studies</li>
<li dir="ltr" role="presentation">Matched DNA sets: used in experimental models for controlled comparison of methylation status&nbsp;</li>
<li dir="ltr" role="presentation">Bisulfite-converted DNA standards: for downstream sequencing-based methylation and PCR analysis</li>
<li dir="ltr" role="presentation">Methylation spike-in controls: for sequencing normalization and high-throughput workflows</li>
<li dir="ltr" role="presentation">Mouse and human DNA methylation reference sets: for specific species epigenetic studies</li>
<li dir="ltr" role="presentation">Methylated DNA IP control kits for methylation assays involving immunoprecipitation</li>
</ul>
&nbsp;
<h2>How to use methylation standards</h2>
&nbsp;
Spike an unmethylated control into every bisulfite or enzymatic conversion reaction
Running an unmethylated DNA like lambda phage DNA alongside your samples in the same conversion reaction estimates the conversion efficiency of that specific run, since every remaining cytosine signal after conversion should be treated as a false positive, and this rate can be quantified and accounted for in downstream analysis.
Run a fully methylated positive control to confirm methylated cytosines are preserved
A fully methylated standard, such as DNA synthesized with 5-methyl-dCTP or commercially prepared methylated genomic DNA, confirms your conversion workflow correctly preserves methylated cytosines intact rather than inadvertently converting them, which would produce false-negative methylation calls.
Use a mixed or intermediate standard to calibrate quantitative methylation assays
A standard containing a defined ratio of methylated to unmethylated DNA, or a set of standards spanning a range of methylation percentages, provides a calibration curve for quantitative methylation assays like 5-methylcytosine ELISA, validating that the assay reports the expected methylation level across its full dynamic range.
Confirm standard stability before long-term storage or lot-to-lot use
Methylation control DNA has documented stability windows, and confirming that your standard's methylation status is stable under storage conditions, and consistent across lots, is necessary for reliable longitudinal monitoring of conversion efficiency.
Use standards to monitor workflow consistency over time
Running a conversion control in every batch allows longitudinal tracking of conversion efficiency across instrument runs, reagent lots, and protocol variations, helping catch workflow drift before it affects real sample results.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Lambda phage DNA is the most commonly used unmethylated bisulfite conversion control because it is naturally unmethylated, commercially available, and well characterized, and it can be aligned to the known lambda phage reference genome after sequencing to calculate residual unconverted cytosine rates, providing a direct, interpretable measure of conversion efficiency. As of 2026, fully methylated and fully unmethylated standard sets are also used alongside enzymatic methyl-seq conversions to confirm that EM-seq's enzymatic mechanism correctly protects methylated cytosines and converts unmethylated ones, independent of the conversion chemistry used.
This category sits within DNA/RNA Methylation, alongside Bisulfite Conversion Kits, Non-Bisulfite Kits &amp; Reagents, and ELISA Kits &amp; Reagents. See the full reagents catalog and use Quick Order for recurring orders.
<a href="https://mbpinc.net/contact-us">Contact the expert team of Molecular Biology Products Inc. (MBP)</a> to get high-quality methylation standards for your lab today.

Methylation Standards

D5011 - MSDS

D5012 - MSDS

D5011-Protocol

D5012-Protocol

Universal Methylated DNA Standard

Universal Methylated DNA Standard (D5011) by Zymo Research — 250 ng/µl human genomic DNA with &gt;95% CpG methylation via M.SssI. Positive control for bisulfite conversion efficiency; compatible with EZ DNA Methylation Kit family and other bisulfite protocols. Includes primer set. Store at ≤−20°C. Made in the USA.

Concentration

Universal Methylated Human DNA Standard

Universal Methylated Mouse DNA Standard

<h2>What are ChIP kits?</h2>
&nbsp;
ChIP (chromatin immunoprecipitation) kits provide all the components needed to enrich a specific protein-DNA complex from fixed, sheared chromatin using an antibody against the protein of interest, whether a histone modification like H3K4me3 or a DNA-binding protein like a transcription factor. A complete ChIP kit covers: formaldehyde crosslinking of proteins to DNA in intact cells or tissue, cell lysis and nuclear extraction, chromatin shearing to appropriate fragment sizes, immunoprecipitation using an antibody pre-bound to protein A/G beads, sequential washing to remove non-specific binding, elution of the antibody-protein-DNA complex, de-crosslinking to release the DNA, and purification of the enriched DNA for downstream analysis.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" style="font-family: arial, helvetica, sans-serif;" aria-level="1">
<a href="https://mbpinc.net/reagents/epigenetics/chip-kits/buffers">Buffers: </a>for immunoprecipitation, chromatin preparation, elution, and washing workflows. Includes Chromatin Shearing Buffer, MN Digestion Buffer, and Chromatin Wash Buffers, designed to support efficient chromatin cleanup, fragmentation, and recovery in ChIP assays
</li>
</ul>
&nbsp;
<h2>How to choose and use ChIP kits</h2>
&nbsp;
Decide between sonication-based and enzymatic chromatin shearing
Sonication shears chromatin mechanically into fragments typically 200&ndash;1000 bp through several optimized burst-and-cool cycles, while enzymatic kits use micrococcal nuclease (MNase) or similar enzymes to cleave chromatin at accessible linker regions. Each approach has different resolution characteristics and cell-type-specific optimization requirements.
Confirm your ChIP kit is compatible with your antibody and magnetic bead format
Most modern ChIP kits use magnetic protein A or protein G Dynabeads to capture the antibody-antigen complex during immunoprecipitation, and matching the bead type to the antibody species and isotype is important for efficient capture and low background.
Plan sonication optimization as a required step before your ChIP experiment
Fragment size after sonication, ideally 200&ndash;750 bp for most ChIP-seq applications, must be confirmed by gel electrophoresis or Bioanalyzer before proceeding, since fragment size directly affects both immunoprecipitation efficiency and the resolution of the resulting ChIP-seq data.
Include an input chromatin control and an isotype control antibody
Running an aliquot of the pre-immunoprecipitation chromatin as an input control normalizes for differences in chromatin accessibility across the genome, while an isotype-matched antibody control establishes background enrichment levels above which true binding sites can be distinguished.
Keep all steps after cell lysis cold to prevent protein degradation
Chromatin prepared for ChIP is sensitive to protease activity and non-specific interactions after formaldehyde fixation, and including protease inhibitors in all lysis and wash buffers, as well as keeping samples cold throughout, reduces background and preserves specificity of the immunoprecipitation.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Sonication requires careful optimization for each cell type and instrument, typically involving pilot experiments at varying pulse widths, total times, and rest intervals, with fragment size evaluated by gel electrophoresis after de-crosslinking to confirm the target range of 200&ndash;750 bp before a full ChIP experiment is run. As of 2026, low-input and ultra-low-input ChIP kits continue to expand access to ChIP experiments from limited cell numbers such as primary cell populations and rare clinical samples, while nano-ChIP and CUT&amp;RUN approaches provide complementary alternatives for very low cell inputs where classical ChIP requires too many cells.
<a href="https://mbpinc.net/contact-us">Contact the expert team</a> at Molecular Biology Products Inc. (MBP) to get premium-quality ChIP reagents and buffers for your lab.

ChIP Kits

ZR-96 ChIP DNA Clean & Concentrator

ZR-96 ChIP DNA Clean &amp; Concentrator (D5206) by Zymo Research — 96-well plate format, 15-minute workflow. Recovers 70–90% of ChIP DNA (50 bp–10 kb); elution ≥10 µl per well. Available in 2×96 and 4×96 prep sizes. All components room-temperature stable.

Elution Volume

Recovery

Size Range

ZR-96 ChIP DNA Clean & Concentrator™ (2 x 96 Preps.)

ZR-96 ChIP DNA Clean & Concentrator™ (4 x 96 Preps.)

Zymo-Seq ATAC Library Kit (12 Rxns.)

D5458 by Zymo Research prepares 12 ATAC-seq libraries from 50,000 cells (&gt;80% viability) using a Tn5 transposase to insert sequencing adapters at open chromatin regions. Libraries in the 200–700 bp range are compatible with Illumina HiSeq, NextSeq, and NovaSeq. Twelve unique UDI Tag Primers are included for multiplexed sequencing runs.

DNA Input

Library Storage

Reagents Not Provided

Sequencing Platform Compatibility

Zymo-Seq Methyl Spike-in Control

D5500 by Zymo Research is the Zymo-Seq Methyl Spike-in Control, containing six synthetic amplicons (180–200 bp) at 0%, 10%, 25%, 50%, 75%, and 100% cytosine methylation for monitoring bisulfite conversion efficiency in WGBS and RRBS workflows. Provides 25 preparations at 60 pg/µl; store at -20°C. Research use only.