Globe Scientific

Cuvettes

<h2 dir="ltr">What are Cuvettes?</h2>
 Cuvettes are small, precision-dimensioned transparent vessels used to hold liquid samples in the light path of a spectrophotometer, fluorometer, or colorimeter for measurement of absorbance, transmittance, fluorescence intensity, or fluorescence polarization. The standard cuvette has a 10 mm optical path length (the distance light travels through the sample), a square or rectangular cross-section, and an internal volume of 1&ndash;4 mL. Cuvettes are manufactured in four main materials&mdash;polystyrene (PS) or polymethylmethacrylate (PMMA) plastic, optical glass, UV-grade quartz (fused silica), and IR quartz&mdash;each covering a different wavelength range. Choose plastic cuvettes for routine visible-light absorbance (380&ndash;780 nm) where disposability prevents cross-contamination; choose optical glass for reusable visible-range work (340&ndash;2,500 nm); choose UV quartz when measurements extend into the UV range below 340 nm (190&ndash;2,500 nm).
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li data-section-id="1cg0wqn" data-start="1810" data-end="1862">Spectrophotometer cuvettes for absorbance analysis</li>
<li data-section-id="vbobpt" data-start="1863" data-end="1890">Polystyrene (PS) cuvettes</li>
<li data-section-id="14z5a6i" data-start="1891" data-end="1906">PMMA cuvettes</li>
<li data-section-id="1h4vr7o" data-start="1907" data-end="1966">Analyzer-specific cuvettes for clinical chemistry systems</li>
<li data-section-id="b3k6fl" data-start="1967" data-end="1998">Standard path length cuvettes</li>
<li data-section-id="td8a19" data-start="1999" data-end="2043">Accessories for spectrophotometer cuvettes</li>
</ul>
<h2 dir="ltr"> How to Choose Cuvettes</h2>
 Material and Wavelength Range Plastic (PS/PMMA) cuvettes transmit visible light from 380&ndash;780 nm and are single-use, eliminating cleaning and cross-contamination risk. They are unsuitable for UV measurements, organic solvents, or strong acids. Optical glass cuvettes transmit 340&ndash;2,500 nm, covering the full visible and near-infrared range; Different manufacturers recommend different procedures. UV quartz cuvettes are traditionally used for DNA/RNA quantification at OD260/OD280 because they transmit UV wavelengths below 340 nm. IR quartz extends to 3,500 nm for near-IR applications. Optical Path Length The standard 10 mm path length follows the Beer-Lambert law at normal sample concentrations. Semi-micro (5 mm path) and micro-volume cuvettes (1 mm path, or internal volumes down to 10&ndash;70 &micro;L) are used for precious or limited-volume samples. The path length directly multiplies absorbance: a 1 mm cuvette gives 1/10 the absorbance of a 10 mm cuvette for the same solution &mdash; account for this in Beer-Lambert calculations. Volume: Macro vs. Semi-Micro vs. Micro Macro cuvettes (1&ndash;4 mL) are the standard for routine spectrophotometry. Semi-micro cuvettes (0.5&ndash;1.5 mL) reduce sample consumption. Micro cuvettes (10&ndash;350 &micro;L) are used when sample volume is limited; sub-micro cuvettes (10 &micro;L or less) suit precious clinical or research samples. Confirm that your spectrophotometer's beam height and aperture are compatible with the cuvette format before purchasing micro formats. Two-Window vs. Four-Window Standard cuvettes have two optically clear windows (the light-entry and exit faces) and two frosted or ribbed side walls for gripping. Four-window (all-clear) cuvettes are required for fluorescence measurements at 90&deg; to the excitation beam &mdash; the two additional clear windows allow emitted fluorescence to exit perpendicular to the excitation path. Confirm whether your instrument requires a standard or fluorescence-grade cuvette. Reusable vs. Disposable Quartz and glass cuvettes are reusable; their higher up-front cost&nbsp;is justified for low-throughput precision work or when solvents or UV wavelengths are required. Plastic cuvettes cost fractions of a cent per use and eliminate washing time in high-throughput assay workflows. Select disposable plastic for any routine colorimetric assay (Bradford, BCA, ELISA plate reader backup, OD600 bacterial growth) where wavelengths stay in the visible range. 
<h2 dir="ltr"> Specifications Context</h2>
&nbsp;
The 10 mm path length standard cuvette has internal dimensions of 10 &times; 10 mm cross-section and an internal height of approximately 45 mm. Outer dimensions are 12.5 &times; 12.5 mm, fitting all standard spectrophotometer cell holders. Window parallelism tolerance is &plusmn;0.01 mm for precision quartz cuvettes; standard optical glass cuvettes have &plusmn;0.1 mm tolerance. Light transmission through UV quartz: &gt;90% at 220 nm and &gt;85% at 200 nm. For nucleic acid quantification, a UV quartz cuvette with a minimum path length of 10 mm is required for OD 260/280 measurements; the ratio of OD260/OD280 should be 1.8&ndash;2.0 for pure DNA and 1.9&ndash;2.1 for pure RNA as a purity indicator. As of 2026, plastic disposable cuvettes remain the most cost-efficient choice for labs running &gt;50 absorbance readings per day in the visible range.
&nbsp;
Need the right fit? MBP can guide you to cuvettes that match your workflow perfectly. For institutional pricing and PO-based bulk ordering, <a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;">contact MBP</a>&nbsp;directly.

111167-Group-Analyzer Consumables Catalog

Accessories for Spectrophotometer Cuvettes

Globe Scientific spectrophotometer cuvette accessories: PE plug caps for cuvette sealing (111167, 1,000/unit), 12-place PE cuvette holder (111168, 5/unit), and 90 mm PS stirring sticks (111169, 100/bag). For standard square spectrophotometer cuvettes.

Manufacture

Cap, Plug for Square Spectrophotometer Cuvettes, PE, 500/Bag, 2 Bags/Unit, BOX/1000

Holder, 12-Place, for Spectrophotometer Cuvettes, PE, 5/Unit, BOX/5

Stirring Stick, 90mm Long, for Spectrophotometer Cuvettes, PS, 100/Unit, BAG/100

Dispenser Syringe Tips

Flyer

3920S-Group-RV-Pette PRO Brochure

Adapter for RV-Pette PRO Dispenser Syringe Tips

RV-Pette PRO Dispenser Tip Adapter by Globe Scientific — adapter enabling 25 mL RV-Pette PRO dispenser tips (SKU 3930/3930S) to connect to the Diamond RV-Pette PRO™ and most repeat-volume pipettor brands. Required for 25 mL large-volume direct-displacement dispensing. Sold individually from MBP Inc. Available as 3930-A (red, 25mL) or 3931-A (gray, 50mL).

Adapter for 25mL RV-Pette PRO Dispenser Tips, Red

Adapter for 50mL RV-Pette PRO Dispenser Tips, Gray

Weighing Dishes & Boats

<h2 data-section-id="4vlupf" data-start="410" data-end="461">What Are Laboratory Weighing Dishes and Funnels?</h2>
&nbsp;
Laboratory weighing dishes and funnels are disposable antistatic consumables used in gravimetric sample preparation&mdash;where solid or liquid materials are weighed on analytical or top-loading balances before being transferred into reaction vessels, volumetric flasks, or tubes. Weighing dishes (also called weigh boats or pour boats) are flat-bottomed antistatic polystyrene containers used to hold samples on the balance pan during weighing. Weighing funnels are antistatic polypropylene tools with one flat side for stability on the balance and a conical stem designed to fit flask necks, allowing complete quantitative transfer of material with minimal loss. Globe Scientific offers antistatic PS weighing dishes in square, hexagonal, and pour-boat formats ranging from 10 mL to 350 mL, and antistatic PP weighing funnels in extra-small through extra-extra-large sizes. Both are single-use only because washing removes antistatic properties and affects weighing accuracy.
&nbsp;
<h2 data-path-to-node="15">What you will find:</h2>
&nbsp;
<ul data-path-to-node="16">
<li>
<a href="https://mbpinc.net/consumables/weighing-dishes-and-funnels/weighing-dishes" title="Weighing Dishes" style="color: #236fa1;">Weighing Dishes</a>: The Precision Interface &ndash; In the journey from balance to vessel, every milligram counts. Our dishes are the specialized bridges that ensure your "calculated mass" actually reaches the reaction.
</li>
<li>
<a href="https://mbpinc.net/consumables/weighing-dishes-and-funnels/funnels" title="Funnels" style="color: #236fa1; text-decoration: underline;">Funnels</a>: High-Flow Transfer Logic &ndash; Stop the "glugging" and the spills. Our funnels are engineered to handle the physics of fluid and powder movement for a seamless bench workflow.
</li>
</ul>
&nbsp;
<h2 data-section-id="1yz3s79" data-start="1436" data-end="1480">How to Choose Weighing Dishes and Funnels</h2>
&nbsp;
Weighing Dish Shape
Square weigh boats are used for routine laboratory weighing and are designed with sloping sides and recessed corners to minimize sample loss during transfer. Hexagonal weigh boats provide better stability on balance pans due to their molded edges and also offer improved grip during handling, making them suitable for workflows where stability matters. Pour-boat designs include a built-in spout that allows controlled and accurate dispensing of liquids or viscous samples into receiving vessels without spillage.
Weighing Dish Capacity
Small 10&ndash;20 mL dishes are used for micro-scale weighing of reagents typically under 2 g on analytical balances. Medium 50&ndash;100 mL dishes are used for routine laboratory weighing of 2&ndash;20 g samples. Large 200&ndash;350 mL dishes are used for bulk powders and higher-volume transfers on top-loading balances.
Weighing Funnel Size
Extra-small funnels are used for 5&ndash;20 mL vessels and microtubes, small funnels for 20&ndash;50 mL, medium funnels for 50&ndash;200 mL, large funnels for 200&ndash;500 mL, and extra-large funnels for 500&ndash;1000 mL flasks. The flat side ensures stable placement on the balance pan during weighing before transfer.
Color: White vs. Black
White dishes provide high contrast for dark or strongly colored samples, making them easier to visualize during transfer. Black dishes are used for light-colored or transparent samples where residue visibility is important, especially when confirming complete sample recovery.
&nbsp;
<h2 data-section-id="1jl751w" data-start="3653" data-end="3678">Specifications Context</h2>
&nbsp;
Globe Scientific antistatic polystyrene weighing dishes operate within &minus;10&deg;C to +80&deg;C and resist dilute acids, bases, and alcohols. The antistatic formulation is a specialized grade designed to reduce static charge and prevent sample loss during weighing and cannot be replaced with standard polystyrene labware. As of 2026, 20 mL and 100 mL antistatic weigh boats are widely used in pharmaceutical QC laboratories, research facilities, and academic analytical chemistry workflows where accuracy and contamination-free handling are required.
Keep sample handling clean and consistent&mdash;<a href="https://mbpinc.net/contact-us" title="MBP supports your workflow">MBP supports your workflow</a> &nbsp;with reliable weighing dishes and funnels designed for real lab conditions.

Weighing Dishes & Funnels

8305-Group-Weigh Dish Brochure

Aluminum Weighing Dishes

Aluminum Weighing Dishes by Globe Scientific are disposable, oil-residue free, stackable dishes for analytical balance weighing, powder handling, and moisture analysis. Available in 11 sizes from 8mL (8309) to 200mL (8315) across crimped-with-tab, crimped-and-curled-lip, and smooth-wall styles.

Aluminum Dish, 50mm, 1.0g (20mL), Crimped Side with Tab, 100/Pack, 10 Packs/Carton, CS/1000

Aluminum Dish, 60mm, 1.3g (40mL), Crimped Side with Tab, 100/Pack, 10 Packs/Carton, CS/1000

Aluminum Dish, 76mm, 2.0g (80mL), Crimped Side with Tab, 100/Pack, 10 Packs/Carton, CS/1000

Aluminum Dish, 72mm, 2.0g (70mL), Smooth Wall without Tab, CS/1000

Aluminum Dish, 30mm, 0.3g (8mL), Crimped Side with Tab, CS/5000

Aluminum Dish, 100mm x 20mm, 150mL, Smooth Wall without Tab, CS/1000

Aluminum Weigh Dish, 51mm OD, 20ml, Crimped Side and Curled Lip, CS/2000

Aluminum Weigh Dish, 70mm OD, 75ml, Crimped Side and Curled Lip, CS/1000

Aluminum Weigh Dish, 70mm OD, 70ml, Crimped Side and Curled Lip, CS/1000

Aluminum Weigh Dish,127mm OD, 200ml, Crimped Side and Curled Lip, CS/1000

Aluminum Weigh Pan, 102mm, 60mL, CS/800

Storage Bottles

<h2 data-section-id="1nhmff" data-start="0" data-end="39">What Are Laboratory Storage Bottles?</h2>
&nbsp;
Laboratory storage bottles are precision-molded plastic vessels used to store, transport, and dispense liquid and solid reagents, solvents, buffers, and samples across a wide range of laboratory workflows. Globe Scientific's Diamond RealSeal bottle range includes wash mouth bottles, wide mouth bottles, and narrow mouth bottles. Wash mouth bottles are flexible LDPE squeeze bottles available in 250&ndash;1000 mL sizes for glassware rinsing and solvent dispensing. Wide mouth bottles, available in HDPE and PP from 30 mL to 2 L, are designed for powders, viscous liquids, and bulk sample storage. Narrow mouth bottles, including Boston round styles in HDPE, LDPE, and PP, range from 4 mL to 8 L and are used for liquid reagents, sampling, and chemical storage. All Diamond RealSeal bottles are manufactured from virgin FDA 21 CFR-compliant resins and feature PP integral-seal closures that provide leak-proof performance without separate liners or gaskets. LDPE is best suited for squeeze-action wash bottles, HDPE is the standard choice for general liquid storage, and PP should be selected whenever autoclave sterilization is required.
&nbsp;
<h2 dir="ltr">What you will find: </h2>
<ul>
<li data-start="0" data-end="100"><a href="https://mbpinc.net/consumables/storage-supplies/storage-bottles/large-format-bottles" title="Large Format Bottles:">Large Format Bottles:</a> High-capacity bottles for storing and handling large volumes of liquids.</li>
<li data-start="102" data-end="186"><a href="https://mbpinc.net/consumables/storage-supplies/storage-bottles/square-bottles" title="Square Bottles:">Square Bottles:</a> Space-efficient bottles designed to maximize storage capacity.</li>
<li data-start="188" data-end="280"><a href="https://mbpinc.net/consumables/storage-supplies/storage-bottles/wide-mouth-bottles" title="Wide Mouth Bottles:">Wide Mouth Bottles:</a> Bottles with large openings for easy filling and sample retrieval.</li>
<li data-start="282" data-end="375"><a href="https://mbpinc.net/consumables/storage-supplies/storage-bottles/wash-mouth-bottles" title="Wash Mouth Bottles:">Wash Mouth Bottles:</a> Squeeze bottles for controlled dispensing and rinsing applications.</li>
<li data-start="377" data-end="468"><a href="https://mbpinc.net/consumables/storage-supplies/storage-bottles/vacuum-bottles" title="Vacuum Bottles:">Vacuum Bottles:</a> Durable bottles designed for vacuum filtration and sample collection.</li>
<li data-start="470" data-end="565"><a href="https://mbpinc.net/consumables/storage-supplies/storage-bottles/narrow-mouth-bottles" title="Narrow Mouth Bottles:">Narrow Mouth Bottles:</a> Bottles with reduced openings to minimize spills and contamination.</li>
<li data-start="567" data-end="667"><a href="https://mbpinc.net/consumables/storage-supplies/storage-bottles/petg-media-bottles" title="PETG Media Bottles:">PETG Media Bottles:</a> Clear, durable bottles for storing media, buffers, and laboratory solutions.</li>
</ul>
&nbsp;
<h2 data-section-id="e7a0da" data-start="1174" data-end="1217">How to Choose Laboratory Storage Bottles</h2>
&nbsp;
Mouth Size: Wash, Wide, or Narrow
Wash mouth bottles feature integrated dispensing nozzles or draw tubes that allow controlled squeeze-action delivery and are primarily used for rinsing and dispensing liquids rather than long-term storage. Wide mouth bottles, with openings typically greater than 38 mm, allow easy filling and dispensing of powders, granules, viscous liquids, and larger samples. Narrow mouth bottles, including Boston round designs, provide controlled pouring, reduced evaporation, and secure storage for liquid reagents and solvents.
Material Match
LDPE is the preferred material for wash bottles because of its flexibility and squeeze performance. HDPE provides broad chemical resistance, low leachables, and a temperature range suitable for most laboratory chemicals and reagents, making it the standard choice for general storage. PP is selected when bottles must withstand autoclave sterilization at 121&deg;C or be used for media preparation and sterile workflows. Amber HDPE and amber PP bottles are recommended for light-sensitive compounds that require protection from UV and visible light exposure.
Volume
Small bottles ranging from 4&ndash;30 mL are commonly used for reference standards, analytical reagents, and sample collection. Mid-range bottles from 60&ndash;500 mL are suitable for daily-use reagents, calibration standards, and working solutions. Larger bottles from 1&ndash;8 L are typically used for bulk reagent storage, media preparation, and buffer stock solutions.
Closure Type
Diamond RealSeal PP closures incorporate an integral seal ring that creates a leak-proof closure without requiring separate liners or gaskets. Standard PP screw caps are used throughout the Diamond Essentials economy line. For autoclavable PP bottles, caps should be loosened during sterilization and tightened after cooling to maintain proper sealing performance.
&nbsp;
<h2 data-section-id="1jl751w" data-start="3910" data-end="3935">Specifications Context</h2>
&nbsp;
Globe Scientific Diamond RealSeal bottles are precision-molded from virgin resins compliant with FDA 21 CFR 177.1520 requirements and are manufactured under ISO 9001:2015 quality systems. The Diamond Essentials range is supplied as a bulk-packed economy option, with bottles and caps packaged separately for high-volume laboratory use. As of 2026, 500 mL HDPE narrow-mouth Boston round bottles and 500 mL LDPE wash bottles remain among the most commonly stocked formats in academic research laboratories, pharmaceutical QC facilities, and industrial testing environments. Explore wash mouth bottles, wide mouth bottles, and narrow mouth bottles for specific bottle styles and applications.
For selecting the right size or material, <a href="https://mbpinc.net/contact-us">the MBP team can help</a> match bottles to your specific workflow needs.

DataSheet

Round Storage Bottles

Amber Color Round HDPE Storage Bottle, Wide Mouth, Sterile

NEST Scientific sterile amber wide-mouth enzyme-free HDPE storage bottles for light-sensitive reagents and nucleic acids. Seven volumes: 8 mL (335301), 15 mL (336301), 30 mL (337301), 60 mL (338301), 125 mL (339301), 250 mL (340301), 500 mL (341301).

Manufacturer

8ml Amber Color Round HDPE Storage Bottle, Wide Mouth, Sterile, 20/pk, 400/cs

15ml Amber Color Round HDPE Storage Bottle, Wide Mouth, Sterile, 20/pk, 400/cs

30ml Amber Color Round HDPE Storage Bottle, Wide Mouth, Sterile, 10/pk, 200/cs

60ml Amber Color Round HDPE Storage Bottle, Wide Mouth, Sterile, 10/pk, 200/cs

125ml Amber Color Round HDPE Storage Bottle, Wide Mouth, Sterile, 10/pk, 100/cs

250ml Amber Color Round HDPE Storage Bottle, Wide Mouth, Sterile, 10/pk, 100/cs

500ml Amber Color Round HDPE Storage Bottle, Wide Mouth, Sterile, 5/pk, 50/cs

Amber Color Round PP Storage Bottle, Wide Mouth, Sterile

Nest Scientific amber wide-mouth round PP storage bottles, sterile (e-beam, SAL 10⁻⁶), USP Class VI PP, autoclavable, −40°C to +121°C. Seven volumes: 335201 (8 mL) through 341201 (500 mL). Amber body for light-sensitive reagent and compound storage.

8ml Amber Color Round PP Storage Bottle, Wide Mouth, Sterile, 20/pk, 400/cs

15ml Amber Color Round PP Storage Bottle, Wide Mouth, Sterile, 20/pk, 400/cs

30ml Amber Color Round PP Storage Bottle, Wide Mouth, Sterile, 10/pk, 200/cs

60ml Amber Color Round PP Storage Bottle, Wide Mouth, Sterile, 10/pk, 200/cs

125ml Amber Color Round PP Storage Bottle, Wide Mouth, Sterile, 10/pk, 100/cs

250ml Amber Color Round PP Storage Bottle, Wide Mouth, Sterile, 10/pk, 100/cs

500ml Amber Color Round PP Storage Bottle, Wide Mouth, Sterile, 5/pk, 50/cs

Sample Storage Container

<h2 dir="ltr">What are Urine Collection Products?</h2>
 Urine collection products for laboratory use are containers and preservative systems designed to collect, stabilize, and transport urine specimens for urinalysis (UA), urine culture (C&amp;S), nucleic acid-based testing (NAAT for STIs), cell-free DNA (cfDNA) liquid biopsy, and 24-hour timed collections. Formats include sterile cups (30&ndash;60 mL), preservative tubes (5&ndash;50 mL), vacuum-draw urine transfer tubes, 24-hour collection containers (2&ndash;3 L), and preservative-prefilled devices for ambient-temperature stabilization of DNA, RNA, and proteins. Choose urine collection products with an active preservative when specimens cannot be processed within 2 hours of collection, when samples must be shipped to a centralized lab, or when nucleic acid integrity over 24+ hours is required.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Sterile urine collection containers for routine diagnostic sampling</li>
<li dir="ltr" role="presentation">Urine transport tubes for secure handling and transfer workflows</li>
<li dir="ltr" role="presentation">Preservative urine tubes for culture and urinalysis stability</li>
<li dir="ltr" role="presentation">Midstream urine collection systems for contamination reduction</li>
<li dir="ltr" role="presentation">24-hour urine collection containers for metabolic testing workflows</li>
<li dir="ltr" role="presentation">Leak-resistant screw-cap urine tubes for safe transport</li>
<li dir="ltr" role="presentation">Graduated urine containers with volume markings for easy measurement</li>
<li dir="ltr" role="presentation">Pediatric urine collection solutions for low-volume sampling</li>
<li dir="ltr" role="presentation">Closed-system urine transfer devices for reduced exposure handling</li>
<li dir="ltr" role="presentation">General laboratory urine collection consumables for research use</li>
</ul>
<h2 dir="ltr"> How to Choose Urine Collection Products</h2>
 Application: Culture vs. NAAT vs. Nucleic Acid Research For culture (C&amp;S), use sterile cups or boric acid preservative tubes. For NAAT (STI panels for Chlamydia, Gonorrhea), use sterile cups or manufacturer-validated transfer tubes; confirm with your platform's IFU (e.g., Hologic Aptima Combo 2 uses a specific urine transport tube). For nucleic acid research (cfDNA, RNA, protein), use dedicated urine preservative tubes (Norgen, Streck) that stabilize analytes for up to 72 hours at room temperature. Volume: Random vs. 24-Hour Collection Random midstream urine (10&ndash;30 mL) is adequate for urinalysis, culture, and NAAT. Timed 24-hour collections (total volume 500&ndash;3000 mL) require large-volume containers with the appropriate preservative for the ordered panel. Mixing 24-hour containers with different preservatives is a common error&mdash;verify the correct preservative type with the laboratory before dispensing to the patient. Preservative Compatibility Boric acid tubes maintain bacterial counts for culture up to 24 hours at room temperature. Boric acid is NOT compatible with NAAT workflows&mdash;it inhibits PCR. For NAAT, use plain sterile containers or manufacturer-specific transfer tubes. For liquid biopsy cfDNA, Streck Cell-Free DNA Urine Preservative maintains cell integrity and prevents genomic DNA contamination for up to 72 hours. Sterility All urine containers intended for culture must be certified sterile. Containers for NAAT must be certified DNase-free and RNase-free to prevent nucleic acid contamination from the container. Confirm sterility and nuclease-free certification in the manufacturer's datasheet before use in molecular workflows. Automated Compatibility For high-throughput labs using automated urine analyzers (Sysmex UF-5000, Siemens CLINITEK), confirm that the collection tube format and cap design are compatible with tube-handling robotics. Copan UriSponge&reg; (FDA-cleared October 2024) is a boric-acid-free device validated for direct loading on WASP&reg; automation systems. 
&nbsp;
<h2 dir="ltr">Specifications Context</h2>
 Standard urine collection cups are manufactured from transparent polypropylene (PP) or polystyrene (PS) with wide-mouth, screw-cap lids. Sterile cups rated for culture meet ISO 7886 and are non-pyrogenic. Boric acid preservative tubes contain approximately 1.8% boric acid, stabilizing bacterial counts by creating a bacteriostatic environment. Norgen urine preservative tubes (5&ndash;50 mL, available in multiple sizes) stabilize DNA, RNA, microRNA, and protein from fresh urine for over 2 years at room temperature per manufacturer validation data. As of 2026, liquid biopsy studies using urine cfDNA routinely use Streck Cell-Free DNA Urine Preservative (3 mL per 30 mL urine) as the standard stabilization protocol in published clinical research protocols. 
Need help picking the right urine collection setup? <a href="https://mbpinc.net/contact-us">Contact MBP</a>, and we&rsquo;ll help you sort it out fast. No confusion, just the right fit for your workflow.

Urine Collection Products

5538-Tubes, Caps & Racks Catalog

5538-TDS-5538

BECKMAN: 13mm Plug Cap for IDS Beckman Specimen Automation Track (2nd Generation), Blue, 500/Bag

5538 by Globe Scientific — blue 13 mm polyethylene plug caps for the Beckman IDS Specimen Automation Track (2nd Generation). 500 caps per bag. Cost-effective OEM replacement for Beckman automation track consumables. Available from MBP Inc. worldwide.

Sample Cups

<h2 dir="ltr">What are Automation Sample Cups?</h2>
 Automation sample cups (also called analyzer sample cups, autosampler cups, or J-cups) are small-volume polystyrene or polypropylene vessels designed to hold aliquoted patient specimens for direct loading into automated clinical chemistry analyzers, immunoassay platforms, hematology analyzers, and ICP-MS/ICP-OES spectrometers. They are used when an analyzer's primary tube handler cannot directly aspirate from a standard 15 mL or 50 mL collection tube&mdash;typically because the sample volume is insufficient, a diluted aliquot is required, or a specific cup geometry is mandated by the instrument's sampling needle. Globe Scientific offers the largest selection of alternate (OEM-equivalent) sample cups for laboratory analyzers, providing significant per-cup savings versus manufacturer-supplied consumables. Choose analyzer sample cups by instrument model first&mdash;dimensional compatibility is non-negotiable&mdash;then optimize for material (PS for optical clarity, PP for chemical resistance) and volume.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
0.2 mL automation sample cups for micro-volume testing
</li>
<li dir="ltr" aria-level="1">
0.5 mL sample cups for routine analyzer use
</li>
<li dir="ltr" aria-level="1">
1.5 mL sample cups for standard clinical workflows
</li>
<li dir="ltr" aria-level="1">
Clear polystyrene sample cups for accurate readings
</li>
<li dir="ltr" aria-level="1">
Conical-bottom cups for complete sample pickup
</li>
<li dir="ltr" aria-level="1">
Low-dead-volume cups for minimal sample waste
</li>
<li dir="ltr" aria-level="1">
Analyzer-compatible sample cups for clinical systems
</li>
<li dir="ltr" aria-level="1">
Disposable sample cups for single-use workflows
</li>
<li dir="ltr" aria-level="1">
Nesting cups for easy storage and handling
</li>
</ul>
<h2 dir="ltr"> How to Choose Automation Sample Cups</h2>
 Instrument Compatibility: Dimensional Match is Mandatory Automation sample cups must match the exact outer diameter, height, and cup-bottom geometry specified by the instrument manufacturer. A cup that is 0.5 mm too wide or too narrow will not seat correctly in the autosampler rotor, causing aspiration failures, pipetting errors, or instrument alarms. Globe Scientific engineers and validates each alternate cup to OEM specifications for named analyzer platforms; confirm the instrument model against the catalog's compatibility list before ordering. Volume: 0.5 mL vs. 1.5 mL vs. 2.0 mL 0.5 mL cups (13.55 &times; 24.50 mm, polystyrene) are used on chemistry analyzers including Beckman CX series, Alpha Wassermann, Bio-Chem Labs, and DPC Immulite platforms. 1.5 mL cups (13.8 &times; 22.60 mm) are used on BioMerieux AG-2/ASCA and MLA 1600C platforms. Larger 2.0 mL cups are used on Roche cobas and Horiba ABX platforms. The minimum working volume of the cup must exceed the analyzer's dead volume (typically 150&ndash;400 &micro;L) plus the required sample volume. Material: Polystyrene vs. Polypropylene Polystyrene (PS) sample cups provide excellent optical clarity for colorimetric-based analyzers that photometrically read the cup contents and have low protein adsorption for routine chemistry analytes. Polypropylene (PP) cups are used when the sample contains organic solvents, strong acids (trace element analysis), or when acid-wash protocols are required for ICP-MS autosampler systems. MoldPro and Globe Scientific PP autosampler cups for PerkinElmer, Agilent, and Shimadzu ICP systems are manufactured from virgin PP with ultra-low metal content verified by ICP-MS lot testing. With or Without Caps/Inserts Sample cups with caps are used when the aliquot must be sealed to prevent evaporation or cross-contamination during batch loading. Insert cups (smaller inner cup that sits inside a standard tube) allow aliquoted samples to be loaded directly without relabeling &mdash; a common efficiency gain in high-volume core labs. Confirm whether your instrument's autosampler accepts capped cups or requires open-top formats. ICP-MS vs. Clinical Chemistry Applications ICP-MS autosampler cups require certified ultra-low metal content (verified by ICP-MS at ppb level), manufactured from virgin PP without metal-containing additives, dyes, or fillers. Standard PS clinical chemistry cups contain low-level metal additives from colorants and should not be used for trace element or heavy metal analysis. Always use metal-free certified cups for any elemental analysis application. 
<h2 dir="ltr"> Specifications Context</h2>
 Globe Scientific analyzer sample cups are manufactured to exact OEM specifications and provide equivalent precision and optical properties to original manufacturer cups. PS cups have optical clarity with &ge;90% light transmission in the visible spectrum, required for photometric analyzers. PP ICP-MS autosampler cups meet ultra-low metal content specifications: typically &lt;1 ppb for Fe, Zn, Cu, Pb, Mn, and other analytes commonly measured in trace element panels. Cup dimensions are held to &plusmn;0.1 mm tolerance on O.D. to ensure consistent seating in autosampler rotors. As of 2026, Globe Scientific is the most widely stocked alternate analyzer consumable brand through lab distributors, including MBP, offering per-cup savings of 20&ndash;40% versus OEM pricing for high-volume clinical labs. 
<a href="https://mbpinc.net/contact-us">Contact MBP&nbsp;</a>for per-cup pricing on case-quantity PO orders.

Automation Sample Cups

5541-Analyzer Consumables Catalog

5541-TDS-5541

BECKMAN: Sample Cup, 0.5mL, for use with Beckman CX series analyzers

5541 by Globe Scientific is a 0.5 mL polystyrene sample cup for Beckman Coulter CX® series clinical chemistry analyzers, also compatible with Access®, Synchron®, and Vi-Cell® platforms. Supplied 1,000/bag as a cost-effective OEM-equivalent replacement. Order at <a href="https://mbpinc.net/quickorder">mbpinc.net/quickorder</a> using catalog number 5541.

5536-Analyzer Consumables Catalog

5536-TDS-5536

BECKMAN: Sample Cup, 2mL, for use with Beckman CX series analyzers, BAG/1000

5536 by Globe Scientific — 2 mL clear polystyrene sample cups for Beckman CX Series, Access, Synchron, and Vi-Cell analyzers. Sold in bags of 1,000. A cost-effective OEM alternative available from MBP Inc. with worldwide shipping.

Transfer Pipettes

<h2>What are disposable transfer pipettes?</h2>
&nbsp;
Disposable transfer pipettes are single-use plastic liquid-handling tools made from low-density polyethylene (LDPE). They are designed as a one-piece bulb-and-stem system used for transferring, dispensing, and handling small volumes of liquids in laboratory workflows.
They are commonly used as a safer and more convenient alternative to glass Pasteur pipettes. Being plastic and disposable, they eliminate the risk of breakage, reduce cross-contamination, and remove the need for separate rubber bulbs. The flexible bulb allows controlled aspiration and dispensing of reagents, samples, and solutions.
&nbsp;
<h2>What you will find:</h2>
&nbsp;
<ul>
<li>Graduated transfer pipettes &ndash; for approximate volume measurement and controlled dispensing</li>
<li>Non-graduated transfer pipettes &ndash; for simple liquid transfer without measurement markings</li>
<li>Fine-tip transfer pipettes &ndash; for small droplets and precise spot dispensing</li>
<li>Sterile transfer pipettes &ndash; for microbiology and contamination-sensitive workflows</li>
<li>Non-sterile transfer pipettes &ndash; for routine laboratory use</li>
<li>Disposable Pasteur pipettes &ndash; for general single-use liquid handling</li>
</ul>
&nbsp;
<h2>How to choose transfer pipettes</h2>
&nbsp;
Tip style Fine-tip pipettes are used for precise work such as microplate spotting and small-volume handling. Standard tips are suitable for general transfers, while wide-bore designs are better for viscous liquids or blood samples. Longer stems help access deep containers.
Capacity and volume handling Select pipettes based on typical working volumes. Smaller pipettes are suitable for low-volume transfers, while larger ones are used for routine sample handling. The effective draw volume depends on bulb capacity and usage technique.
Graduated vs non-graduated Graduated pipettes allow approximate volume estimation and are useful in clinical and diagnostic workflows. Non-graduated pipettes are intended for general dispensing where precise measurement is not required.
Sterility requirements Sterile pipettes are used in microbiology, cell culture, and clinical applications where contamination control is essential. Non-sterile versions are suitable for general laboratory and teaching use.
Length and accessibility Long pipettes are preferred for deep vessels such as flasks and bottles, while shorter designs are used for compact tubes and small workspaces.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Disposable LDPE transfer pipettes are widely used laboratory consumables for general-purpose liquid handling in research, clinical, and educational environments. They are available in sterile and non-sterile formats with multiple tip designs and capacities to support different workflows.
These pipettes remain a standard alternative to glass Pasteur pipettes due to their safety, low cost, and reduced contamination risk in routine laboratory applications.
For bulk orders or lab-specific requirements, <a href="https://mbpinc.net/contact-us">contact the MBP team</a> for assistance and pricing.

138002-Group-Transfer Pipet Brochure

Bellows Transfer Pipets

Bellows Transfer Pipets by Globe Scientific are graduated bellows transfer pipets made from LDPE, non-sterile, in a bench-top dispenser box with a hinged front panel for single-handed access. ISO 9001:2015 manufactured. Available in 7.0mL (138002, or bag-only 138002-100) and 15.0mL graduated to 5mL (138005, or bag-only 138005-100).

Transfer Pipet, 7.0mL, Bellows, 100/Bag, 20 Bags/Unit 

Transfer Pipet, 7.0mL, Bellows, 100/Bag

Transfer Pipet, 15.0mL, Bellows, Graduated to 5mL, 100/Bag, 12 Bags/Unit

Transfer Pipet, 15.0mL, Bellows, Graduated to 5mL, 100/Bag

Cryo Boxes

<h2>What Are Cryo Boxes?</h2>
&nbsp;
Cryo boxes are lidded, gridded storage containers designed to organize cryogenic vials, microcentrifuge tubes, and centrifuge tubes inside ultra-low temperature (ULT) freezers at &minus;80&deg;C, vapor-phase liquid nitrogen refrigerators (&minus;150 to &minus;190&deg;C), and cryogenic dewars. The two primary materials are water-resistant coated cardboard (economical, single-use) and rigid polycarbonate or polypropylene (reusable, autoclavable, transparent). Standard well configurations&mdash;25 (5&times;5), 81 (9&times;9), and 100 (10&times;10)&mdash;in 2-inch and 3-inch box heights match common cryogenic vial sizes. The alphanumeric grid on the lid helps with sample tracking in LIMS systems. Cardboard cryo boxes are vapor-phase LN2 rated only; polycarbonate is required for autoclave use or liquid-phase LN2 immersion.
&nbsp;
<h2>What you will find:</h2>
&nbsp;
&bull; Standard cryo boxes for cryogenic vial storage &bull; Freezer storage boxes for ultra low temperature use &bull; Cardboard cryo boxes for cost effective storage &bull; Polypropylene cryo boxes for durability and reuse &bull; Grid format boxes for easy sample organization &bull; Hinged lid cryo boxes for quick access &bull; Color coded storage boxes for sample identification &bull; Cryo storage boxes for 1.5 mL and 2.0 mL vials
&nbsp;
<h2>How to Choose Cryo Boxes</h2>
&nbsp;
Material: Cardboard vs. Polycarbonate vs. Polypropylene
Cardboard cryo boxes are economical and used for long-term storage at &minus;80&deg;C or vapor-phase LN2. They are single-use and not autoclavable. Polycarbonate (PC) boxes are durable, transparent, and autoclavable at 121&deg;C, making them suitable for frequent handling. Polypropylene (PP) boxes also tolerate autoclaving and offer higher chemical resistance than PC. Choice depends on reuse frequency and sterilization needs.
Well Count and Vial Size
81-well (9&times;9) boxes fit standard 1.8&ndash;2.0 mL cryogenic vials up to ~13 mm outer diameter. 100-well (10&times;10) boxes are used for smaller 1.2&ndash;1.5 mL vials and microcentrifuge tubes up to ~12 mm OD. Always match vial diameter with box well size before ordering.
Box Height: 2-Inch vs. 3-Inch
2-inch boxes are standard for 1&ndash;2 mL cryovials and are most commonly used in biobanking. 3-inch boxes are for larger 3&ndash;5 mL vials and certain centrifuge tubes where extra depth is required.
LN2 Phase Compatibility
Both cardboard and hard-wall boxes can be used in vapor-phase LN2. Only polycarbonate or polypropylene boxes should be used for liquid-phase LN2 because cardboard can break down when submerged.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Cryo boxes are typically rated from &minus;196&deg;C to +121&deg;C depending on material. Cardboard is suitable for vapor-phase LN2 only, while hard-wall plastic boxes can handle more demanding workflows. Proper selection depends on vial size, storage temperature, and how frequently samples are accessed.
Eliminate the risk of thermal damage. <a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;">Connect with the experts at Molecular Biology Products Inc.</a> to find the perfect storage solution for your high-value specimens.

3039-Group-Cryogenic Vial Brochure

BioBOX for 1.0mL and 2.0mL CryoCLEAR vials

The BioBOX 25 for 1.0 mL and 2.0 mL CryoCLEAR Vials by Globe Scientific is a polycarbonate 5×5 cryogenic storage box (−196°C to +121°C) with printed grid lid and included tube picker. Available in Blue (3039B), Green (3039G), Red (3039R), and Yellow (3039Y). CS/48. Smaller-footprint alternative to the 81-place BioBox 81 (3040).

BioBOX 25, for 1.0mL and 2.0mL CryoCLEAR vials, Polycarbonate (PC), Holds 25 vials (5x5 format), Printed Lid, Pack Includes a CryoClear Tube Picker, BLUE, CS/48

BioBOX 25, for 1.0mL and 2.0mL CryoCLEAR vials, Polycarbonate (PC), Holds 25 vials (5x5 format), Printed Lid, Pack Includes a CryoClear Tube Picker, GREEN, CS/48

BioBOX 25, for 1.0mL and 2.0mL CryoCLEAR vials, Polycarbonate (PC), Holds 25 vials (5x5 format), Printed Lid, Pack Includes a CryoClear Tube Picker, RED, CS/48

BioBOX 25, for 1.0mL and 2.0mL CryoCLEAR vials, Polycarbonate (PC), Holds 25 vials (5x5 format), Printed Lid, Pack Includes a CryoClear Tube Picker, YELLOW, CS/48

Compound Microscopes

<h2>What Are Compound Microscopes?</h2>
&nbsp;
A compound microscope forms a magnified image through two sequential lens systems: the objective lens (positioned close to the specimen) provides the primary magnification; the eyepiece (ocular) lens further magnifies the image from the objective, producing a final image that the eye or camera receives. Magnification is the product of the objective magnification and the eyepiece magnification (e.g., 40x objective x 10x eyepiece = 400x total). The transmitted light illumination system (Koehler illumination) passes light from below through the thin specimen mounted on a glass slide, through the objective, and to the eyepiece. This optical configuration provides the highest resolving power of any routine light microscope type, with resolution determined by the numerical aperture (NA) of the objective and the wavelength of light used. Routine brightfield compound microscopes with 4x, 10x, 40x, and 100x (oil) objectives and 10x eyepieces cover 40x to 1000x total magnification. Phase contrast models add a phase ring in the condenser matched to each objective, enabling contrast of unstained transparent cells. Fluorescence models add an epi-fluorescence port and filter cube turret for imaging immunofluorescence-labeled sections and fluorescent markers. Choose a compound microscope for examination of specimens that have been prepared as thin slides, stained sections, or smears; it is the standard instrument for histology, clinical microbiology, hematology, and fixed-tissue fluorescence imaging.
&nbsp;
<h2 class="PDq2pG_selectionAnchorContainer" data-section-id="bxblbi" data-start="0" data-end="23">What You Will Find:</h2>
&nbsp;
<ul data-start="25" data-end="588" data-is-last-node="" data-is-only-node="">
<li data-section-id="wnrw34" data-start="25" data-end="136">
BioBlue&trade; and bScope&reg; Compound Microscopes for routine biological, educational, and laboratory microscopy.
</li>
<li data-section-id="1ybdsx8" data-start="137" data-end="238">
iScope&reg; Research Microscopes with Plan and E-Plan optics for high-quality imaging and analysis.
</li>
<li data-section-id="g8b9ar" data-start="239" data-end="350">
Phase Contrast Microscopes for enhanced observation of transparent, unstained specimens and living cells.
</li>
<li data-section-id="ijdsh0" data-start="351" data-end="446">
LED Fluorescence Microscopes for fluorescence-based cell and tissue imaging applications.
</li>
<li data-section-id="vrizlz" data-start="447" data-end="588" data-is-last-node="">
Specialized Systems, including polarization microscopes and anatomopathology microscopes for advanced research and diagnostic workflows.
</li>
</ul>
&nbsp;
<h2>How to Choose a Compound Microscope</h2>
&nbsp;
Brightfield vs. phase contrast vs. fluorescence
Brightfield compound microscopes are the entry-level configuration, adequate for stained tissue sections, Gram-stained bacterial smears, blood smears, and all applications where contrast comes from staining rather than optical manipulation. Phase contrast is required for observation of unstained, living, or lightly fixed cells, where inherent contrast is too low for brightfield, common in microbiology, parasitology, and cytology. Fluorescence (epi-fluorescence) is required for DAPI nuclear staining, immunofluorescence (IF) labeling, FISH assays, and fluorescent reporter protein imaging in fixed cells.
Objective quality: plan-achromat vs. plan-apochromat
Plan-achromat objectives correct for chromatic aberration at two wavelengths and are flat (plan) across the field, suitable for routine brightfield and basic fluorescence imaging. Plan-apochromat objectives correct for chromatic aberration at three or more wavelengths and provide superior color fidelity and fluorescence flatness across the full field, required for multi-channel fluorescence imaging, quantitative image analysis, and publication-quality fluorescence documentation. Plan-apochromat sets cost significantly more than plan-achromat sets; specify them when fluorescence image quality and accurate color reproduction matter.
Magnification set
A standard objective set for a research compound microscope: 4x (NA 0.10) for tissue overview; 10x (NA 0.30) for histological pattern assessment; 20x (NA 0.50) for cellular detail without immersion; 40x dry (NA 0.65 to 0.75) for detailed cell morphology; 63x or 100x oil immersion (NA 1.25 to 1.40) for highest-resolution organelle imaging and bacteria identification. For clinical microbiology, 100x oil is the standard for bacterial identification. For routine histology, 10x and 40x are the most used.
Illumination: LED vs. halogen
LED transmitted light illumination is now standard on most new compound microscopes, providing 50,000+ hour lamp life, instant-on operation, no color temperature shift over lifetime, and significantly lower power consumption than halogen. Halogen (6V 30W or 12V 100W) remains in use on older instruments and some entry-level models and requires bulb replacement every 50 to 200 hours. For new purchases, specify LED illumination.
Camera port and documentation
A trinocular head with a C-mount camera port is standard for documentation in research labs. The camera beam splitter on research-grade microscopes maintains eyepiece brightness while splitting a portion of the light to the camera; entry-level trinoculars may dim the eyepiece view when the camera port is in use. A CMOS or CCD camera is required; confirm the camera's pixel size against the objective magnification and required image resolution for your intended analysis.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Oil immersion objectives (63x NA 1.40, 100x NA 1.40) require immersion oil between the objective front lens and the coverslip to achieve their rated NA. Confirm that the coverslip thickness is No. 1.5 (0.17 mm); most plan-apochromat objectives are corrected for this standard thickness. Non-standard coverslip thickness introduces spherical aberration that degrades resolution and fluorescence image quality. For routine use in clinical microbiology or hematology where high-throughput slide processing is needed, wide-field eyepieces (22 mm field number) reduce the number of microscope fields needed to survey the full slide area, improving throughput.&nbsp;
&nbsp;
<a href="https://mbpinc.net/contact-us">Contact the MBP team </a>to discuss product availability or get selection guidance.

BioBlue Series Compound Microscopes-Microscopes Catalog

BioBlue Series Compound Microscopes

BioBlue Compound Microscopes Series

Globe Scientific BioBlue compound microscopes — SMP objectives, 1W NeoLED cordless illumination (batteries not included), mechanical stage. EBB-4260 (binocular, 40–1000×), EBB-4220-LCD (7-inch LCD screen, 40–400×), EBB-4253 (trinocular), EBB-4253-DC18 (trinocular + CMEX-18 Pro 18MP USB-3 camera).

BioBlue binocular microscope SMP 4/10/S40/S100x objectives with mechanical stage and 1W NeoLED™ cordless illumination

BioBlue microscope with 7 inch LCD screen and SMP 4/10/S40 objectives with mechanical stage and 1W LED cordless illumination

BioBlue trinocular microscope SMP 4/10/S40/S100x oil objectives with mechanical stage and 1W NeoLED™ cordless illumination

BioBlue trinocular microscope SMP 4/10/S40/S100x oil objectives with mechanical stage and 1W NeoLED™ cordless illumination, with CMEX-18 Pro, 18.0MP digital USB-3 camera with 1/2.3 inch CMOS sensor

Biopsy Cassettes

<h2 data-section-id="1l9wr55" data-start="0" data-end="29">What Are Biopsy Cassettes?</h2>
&nbsp;
Biopsy cassettes are specialized histology cassettes manufactured from acetal polymer (POM) and designed with fine 1 mm square mesh openings instead of the wider slots used in standard tissue cassettes. These fine mesh openings securely retain small tissue specimens such as gastric endoscopic biopsies, prostate needle cores, liver biopsies, and skin punch biopsies that could otherwise be lost during tissue processor agitation, vacuum cycles, and reagent exchanges. Like standard tissue cassettes, biopsy cassettes function as the specimen container throughout processing, embedding, and long-term paraffin block storage. Multi-compartment designs allow multiple tissue cores from different anatomical sites to be processed together while maintaining specimen orientation and identification.
Use biopsy cassettes for specimens smaller than approximately 3 mm. The fine 1 mm mesh is the key feature that prevents specimen loss during processing.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">30&deg; Biopsy Cassettes: Classic angled design with dual labeling panels for clear identification and reliable handling.</li>
<li dir="ltr" role="presentation">35&deg; Biopsy Cassettes: Printer-optimized angle for smoother feeding and high-contrast labeling.</li>
<li>Foam Biopsy Pads: Hold delicate tissues firmly in place, preventing movement and damage.</li>
</ul>
&nbsp;
<h2 data-section-id="1h918vw" data-start="992" data-end="1025">How to Choose Biopsy Cassettes</h2>
&nbsp;
Single vs. Multi-Compartment
Single-compartment biopsy cassettes are the standard choice for processing one specimen per paraffin block and are suitable for most diagnostic biopsy applications. Multi-compartment cassettes, including four-compartment and six-compartment formats, allow several biopsy cores from different anatomical locations to be processed in the same cassette while preserving their positional identity. These formats are commonly used for prostate biopsy series and other multi-site sampling procedures.
Mesh Opening Size
Standard biopsy cassettes feature 1 mm square mesh openings that provide an effective balance between specimen retention and reagent flow. For ultrafine tissue cores, dispersed cell pellets, or particularly delicate specimens, microbiopsy or biomesh cassettes with smaller openings ranging from approximately 0.38 mm to 0.6 mm may provide better specimen containment.
Lid Design and Printer Compatibility
Globe Scientific biopsy cassettes utilize an integral click-shut hinged lid that closes securely and can be reopened multiple times without compromising closure integrity. This design is particularly useful during grossing procedures where specimens may need to be inspected before processing. Writing surfaces are available in both 30&deg; and 35&deg; angles to ensure compatibility with Leica and Sakura cassette labeling systems.
Foam Biopsy Pads
Biopsy foam pads are commonly used when processing extremely small tissue fragments. These polyester urethane foam inserts help immobilize specimens within the cassette, maintaining proper orientation and preventing movement during tissue processing while still allowing efficient reagent penetration and drainage.
Compatibility with Base Molds
Biopsy cassettes share the standard histology cassette footprint of approximately 40 &times; 28 &times; 6 mm, allowing compatibility with standard stainless steel and disposable plastic embedding molds. Multi-compartment designs maintain the same external dimensions while providing internal specimen separation.
&nbsp;
<h2 data-section-id="1jl751w" data-start="4594" data-end="4619">Specifications Context</h2>
&nbsp;
Globe Scientific biopsy cassettes are manufactured from durable acetal polymer and feature 1 mm square mesh openings engineered to maximize specimen retention while allowing efficient reagent penetration. The fine mesh design provides a large total open surface area for fluid exchange despite the smaller individual openings. These cassettes are resistant to formalin, xylene, graded alcohols, and acidic decalcifying agents commonly used in histology laboratories. The standard footprint of approximately 40 &times; 28 &times; 6 mm ensures compatibility with Leica ASP, Sakura VIP, Thermo Shandon Excelsior, and most other automated tissue processors. Globe Scientific maintains ISO 9001:2015 certification, and lot-specific conformance documentation is available upon request through MBP.
Protect your smallest samples with the professional standard. Check out our biopsy range and&nbsp;<a href="https://mbpinc.net/contact-us">hit up the MBP team</a> for a quote.

Biopsy Cassettes with Attached Lids, 30° Writing Area

Biopsy Cassettes with Attached Lids feature a 30° angled writing surface, two labeling side panels, and a secure attached lid that remains fixed to the cassette body throughout tissue processing to prevent lid-loss. Molded from acetal polymer (POM), they resist xylene, alcohols, formalin, and decalcifying solutions. Compatible with Leica ASP, Sakura VIP, Thermo Shandon Excelsior, and most automated tissue processors. Optimized for manual labeling; not compatible with standard cassette printers. Available in Blue (1091B), Green (1091G), Orange (1091N), White (1091W), and Yellow (1091Y).

Cassette, Biopsy Embedding with Attached Lid, 30° Writing Area, BLUE, 500/Dispenser Box, 2 Boxes/Unit

Cassette, Biopsy Embedding with Attached Lid, 30° Writing Area, GREEN, 500/Dispenser Box, 2 Boxes/Unit

Cassette, Biopsy Embedding with Attached Lid, 30° Writing Area, ORANGE, 500/Dispenser Box, 2 Boxes/Unit

Cassette, Biopsy Embedding with Attached Lid, 30° Writing Area, WHITE, 500/Dispenser Box, 2 Boxes/Unit

Cassette, Biopsy Embedding with Attached Lid, 30° Writing Area, YELLOW, 500/Dispenser Box, 2 Boxes/Unit

United States

Texas

mbpinc