Beakers

Plastic Beakers

<h2 data-section-id="174q2lb" data-start="139" data-end="167">What Are Plastic Beakers?</h2>
&nbsp;
Plastic beakers are shatterproof cylindrical laboratory vessels manufactured from polypropylene (PP) or polymethylpentene (PMP), designed for safe and lightweight liquid handling in environments where glass breakage is a concern. Polypropylene (PP) is the most commonly used material due to its strong chemical resistance to dilute acids, bases, alcohols, and most aqueous reagents, along with autoclavability at 121&deg;C and permanently molded graduations that do not fade with use. Polymethylpentene (PMP) offers higher optical clarity and better heat tolerance, making it suitable for applications requiring visual monitoring of solutions. Choose PP plastic beakers for routine buffer preparation, aqueous reagents, teaching labs, and field use; choose glass beakers when working with organic solvents, high temperatures above ~135&deg;C, or when maximum optical clarity is required.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Options from 5mL for micro-work to 10,000mL for bulk prep.
</li>
<li dir="ltr" aria-level="1">
High-clarity polypropylene built for heavy reagent use.
</li>
<li dir="ltr" aria-level="1">
Options for Tri-corner beaker are also available.
</li>
<li dir="ltr" aria-level="1">
Molded-in graduations that never fade or rub off.
</li>
<li dir="ltr" aria-level="1">
Engineered for drip-free pouring and zero-waste transfers.
</li>
<li dir="ltr" aria-level="1">
Stock up with Case Packs or grab a single unit.
</li>
</ul>
&nbsp;
<h2 data-section-id="149sszu" data-start="1054" data-end="1086">How to Choose Plastic Beakers</h2>
&nbsp;
Material: Polypropylene vs. Polymethylpentene
Polypropylene (PP) beakers are the standard choice in most laboratories because they are autoclavable at 121&deg;C, cost-effective, and resistant to a wide range of aqueous reagents including dilute acids and bases. They are typically translucent and designed for general-purpose laboratory workflows. Polymethylpentene (PMP) beakers, on the other hand, offer near-glass optical clarity (approximately 90% light transmission) and can tolerate higher temperatures up to around 175&deg;C, making them suitable for applications where visibility of the solution is important during mixing or heating.
Graduation Type: Molded-In
Plastic beakers at MBP feature molded-in graduations that are permanently embossed into the wall of the vessel. These markings remain legible even after repeated autoclaving, chemical exposure, and washing cycles, making them more durable than printed alternatives and ideal for long-term reuse.
Volume Range
MBP supplies plastic beakers in sizes ranging from 5 mL to 10,000 mL. Small-volume beakers (5&ndash;50 mL) are used for micro-scale reagent preparation, while mid-range sizes (250 mL&ndash;1,000 mL) are standard for routine buffer preparation. Large-capacity beakers (2,000&ndash;10,000 mL) are used for bulk reagent mixing, media preparation, and large-scale laboratory workflows.
Tri-Corner Beaker Option
Tri-corner (tri-pour) beakers are a specialized plastic format designed with three pour spouts for controlled dispensing and reduced dripping. These are commonly used in reagent distribution stations, waste handling, and workflows requiring frequent liquid transfer. They are typically made from polypropylene and complement standard round-form beakers.
&nbsp;
<h2 data-section-id="1jl751w" data-start="3281" data-end="3306">Specifications Context</h2>
&nbsp;
Polypropylene (PP) has a density of approximately 0.91 g/cm&sup3; and is chemically resistant to dilute acids (HCl, H₂SO₄), bases (NaOH, KOH), alcohols, and most aqueous buffers. However, it is not compatible with concentrated oxidizing acids (such as concentrated nitric or sulfuric acid) or halogenated organic solvents (such as chloroform, methylene chloride, or xylene). Molded graduations typically maintain an accuracy of &plusmn;5% of total capacity. PMP provides higher transparency and improved heat resistance compared to PP but is generally more expensive.
MBP stocks plastic beakers in a full range of sizes from 5 mL to 10,000 mL, including standard round-form and tri-corner designs for institutional laboratory use.
Upgrade to equipment that truly lasts the lab life. Look through our website and <a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;">contact the MBP team</a> for a quote to get lab supplies that won't let you down.

Flyer

Diamond® Essentials™ PMP Griffin Style Beakers with Handle Specifications

Diamond® Essentials™ PMP Griffin Style Beakers with Handle

3656-100 by Globe Scientific is a 100 mL PMP Griffin style beaker with handle, near-UV-transparent, autoclavable at 121°C, and USP Class VI certified. Dimensions 63×53×73 mm, dual-scale graduations 20–100 mL, non-drip spout. The handle enables safe hot-liquid pouring directly after sterilisation. Supplied 12/case.

Manufacture

Beaker with Handle, Diamond Essentials, Low Form, Printed Graduations, PMP, 100mL, 1/Bag, CS/12

Beaker with Handle, Diamond Essentials, Low Form, Printed Graduations, PMP, 250mL, 1/Bag, CS/12

Beaker with Handle, Diamond Essentials, Low Form, Printed Graduations, PMP, 600mL, 1/Bag, CS/12

Beaker with Handle, Diamond Essentials, Low Form, Printed Graduations, PMP, 1000mL, 1/Bag, CS/6

Beaker with Handle, Diamond Essentials, Low Form, Printed Graduations, PMP, 2000mL, 1/Bag, CS/4

Beaker with Handle, Diamond Essentials, Low Form, Printed Graduations, PMP, 5000mL, 1/Bag, CS/2

Glass Beakers

<h2 data-section-id="1opwkme" data-start="170" data-end="207">What Are Glass Laboratory Beakers?</h2>
&nbsp;
Glass laboratory beakers are wide-mouth borosilicate vessels with a flat base, pour spout, and volume graduation markings, used for heating liquids on hot plates, mixing reagents, preparing buffers, and performing titrations. Borosilicate glass (ASTM E960, USP Type I) is the standard material for lab-grade glass beakers because its low coefficient of thermal expansion (~3.3&times;10⁻⁶/K) provides excellent resistance to thermal shock while maintaining chemical inertness against most laboratory acids, bases, and organic solvents. Choose borosilicate glass beakers for high-heat protocols, organic solvent work, and applications where chemical purity and optical clarity are essential.
&nbsp;
<h2 dir="ltr">At MBP, we offer:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
50mL, 100mL, 250mL, 1000mL, 2000mL, 5000mL, and 10,000mL capacities.
</li>
<li dir="ltr" aria-level="1">
Shatterproof Polypropylene (PP) or crystal-clear Polymethylpentene (PMP).
</li>
<li dir="ltr" aria-level="1">
Low-form versatility with easy-pour, non-drip spouts.
</li>
<li dir="ltr" aria-level="1">
Clear dual-scale markings for rapid and accurate measuring.
</li>
<li dir="ltr" aria-level="1">
Fully autoclavable at 121&deg;C for sterile lab environments.
</li>
<li dir="ltr" aria-level="1">
High resistance to most acids, bases, and common solvents.
</li>
<li dir="ltr" aria-level="1">
Stackable geometry to maximize benchtop and cabinet space.
</li>
</ul>
&nbsp;
<h2 data-section-id="qre4og" data-start="898" data-end="928">How to Choose Glass Beakers</h2>
&nbsp;
Size: Matching Capacity to Workflow
Glass beaker size should be selected according to the volume of solution being prepared or heated. Small 50&ndash;100 mL beakers are commonly used for staining procedures, dyes, and small-scale reactions, while 250 mL beakers are suitable for routine buffer preparation and sample digestion. For larger laboratory workflows, 1,000 mL beakers are commonly used for standard media and buffer preparation, while 2,000 mL models provide additional capacity for larger batches and water-bath applications. Laboratories preparing bulk reagents or culture media often use 5,000&ndash;10,000 mL beakers. As a general guideline, fill beakers to no more than two-thirds of their nominal capacity during heating to allow for liquid expansion and reduce boil-over risk.
Graduation Type: Molded vs. Printed Dual-Scale
Molded graduations are embossed directly into the glass surface, making them resistant to solvents, cleaning procedures, and repeated autoclaving. Printed dual-scale graduations provide enhanced visibility and may include both metric and imperial measurements for convenience. Laboratories that frequently sterilize glassware often prefer molded graduations because they remain readable throughout the product's service life.
Form Factor
Low-form Griffin-style beakers are the most common laboratory beakers due to their wide, stable base and suitability for magnetic stirring and hot-plate heating. Tall-form Berzelius beakers provide a narrower profile and taller liquid column, making them useful for certain titration procedures, distillation work, and applications where splash reduction is desirable.
Autoclave Compatibility
Borosilicate glass beakers can be safely autoclaved at 121&deg;C and are suitable for dry-heat sterilization up to 500&deg;C. Beakers should never be sealed during autoclaving because thermal expansion of liquids may create pressure buildup. Although borosilicate glass maintains excellent dimensional stability, repeatedly autoclaved beakers should not be relied upon for precision volumetric measurements.
&nbsp;
<h2 data-section-id="1jl751w" data-start="3556" data-end="3581">Specifications Context</h2>
&nbsp;
Borosilicate glass beakers conforming to ASTM E960 provide graduation accuracy of approximately &plusmn;5% of total capacity at each marked volume. They withstand direct hot-plate heating, water baths, sand baths, autoclave sterilization at 121&deg;C, and dry-heat sterilization up to 500&deg;C. Borosilicate glass is resistant to most laboratory acids, alkalis, and organic solvents including hydrochloric acid, sulfuric acid, nitric acid, sodium hydroxide, ethanol, acetone, xylene, and chloroform. However, hydrofluoric acid (HF) should never be used with glass beakers because it attacks and dissolves glass surfaces.
Browse Plastic Beakers for shatter-resistant alternatives, Griffin Style Beakers for general-purpose laboratory use, or return to the Laboratory Glassware category. <a href="https://mbpinc.net/contact-us">Request a quote from the team at MBP</a> to lock in the best performance for your bench.

Diamond® Essentials™ PMP Griffin Style Low Form Beakers Specifications

Diamond® Essentials™ PMP Griffin Style Low Form Beakers

3652-50 by Globe Scientific is a 50 mL PMP (polymethylpentene) Griffin style low form beaker with USP Class VI certification. Near-UV-transparent for UV spectrophotometry applications, autoclavable at 121°C, with printed dual-scale graduations (10–50 mL) and a non-drip spout. Supplied 12 per bag — chemically resistant to most acids, bases, and many common solvents.

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PMP, 50mL, 12/Bag, CS/48

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PMP, 100mL, 12/Bag, CS/48

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PMP, 250mL, 6/Bag, CS/36

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PMP, 600mL, 4/Bag, CS/24

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PMP, 1000mL, 3/Bag, CS/12

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PMP, 2000mL, 1/Bag, CS/6

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PMP, 5000mL, 1/Bag, CS/4

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PMP, 10,000mL, 1/Bag, CS/2

Diamond® Essentials™ PP Griffin Style Beakers with Handle Specifications

Diamond® Essentials™ PP Griffin Style Beakers with Handle

3654-100 by Globe Scientific is a 100mL Diamond® Essentials™ Griffin-style low-form PP beaker with an integrated handle. Made from virgin USP Class VI PP; autoclavable at 121°C; printed dual-scale graduations; single non-drip spout. Complies with FDA 21-CFR and European Pharmacopeia. Case of 12. Series runs 100mL–5000mL.

Beaker with Handle, Diamond Essentials, Low Form, Printed Graduations, PP, 100mL, 1/Bag, CS/12

Beaker with Handle, Diamond Essentials, Low Form, Printed Graduations, PP, 250mL, 1/Bag, CS/12

Beaker with Handle, Diamond Essentials, Low Form, Printed Graduations, PP, 600mL, 1/Bag, CS/12

Beaker with Handle, Diamond Essentials, Low Form, Printed Graduations, PP, 1000mL, 1/Bag, CS/6

Beaker with Handle, Diamond Essentials, Low Form, Printed Graduations, PP, 2000mL, 1/Bag, CS/4

Beaker with Handle, Diamond Essentials, Low Form, Printed Graduations, PP, 5000mL, 1/Bag, CS/2

Diamond® Essentials™ PP Griffin Style Low Form Beakers Specifications

Diamond® Essentials™ PP Griffin Style Low Form Beakers

3650-50 by Globe Scientific is a 50 mL Griffin style polypropylene (PP) lab beaker with USP Class VI resin certification. Features printed dual-scale graduations (10–50 mL), non-drip spout, autoclavability at 121°C, and stackable design — 12 per bag. A shatterproof, chemically resistant alternative to glass beakers for mixing, measuring, and sample prep.

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PP, 10,000mL, 1/Bag, CS/2

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PP, 50mL, 12/Bag, CS/48

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PP, 100mL, 12/Bag, CS/48

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PP, 250mL, 6/Bag, CS/36

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PP, 600mL, 4/Bag, CS/24

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PP, 1000mL, 3/Bag, CS/12

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PP, 2000mL, 1/Bag, CS/6

Beaker, Diamond Essentials, Griffin Style, Low Form, Printed Graduations, PP, 5000mL, 1/Bag, CS/4

Four Pour Spout Beakers

3601 by Globe Scientific is a 5 mL disposable polystyrene beaker with four symmetrical pour spouts for drip-free liquid transfer in any orientation. Rated to 200°F (93°C), resistant to dilute acids, aqueous solutions, and alcohols. Supplied 1,000/case, ideal for atomic absorption, flame photometry, and general lab decanting.

Beaker, Disposable, PS, 5mL, CS/1000

Beaker, Disposable, PS, 10mL, CS/1000

Beaker, Disposable, PS, 20mL, CS/500

Beaker, Disposable, PS, 50mL, CS/500

Beaker, Disposable, PS, 150mL, CS/100

Beaker, Disposable, PS, 250mL, CS/100

Griffin Style Beaker

<h2 data-section-id="1sg16rn" data-start="114" data-end="148">What Are Griffin Style Beakers?</h2>
&nbsp;
Griffin style beakers are low-form cylindrical vessels with a height-to-diameter ratio of approximately 1.0:1.4 &mdash; shorter and wider than tall-form (Berzelius) beakers &mdash; designed for stable stirring on a magnetic stir plate, heating on a hot plate, and general reagent handling on the bench. The flat base provides maximum contact with hot-plate surfaces for uniform heating; the wide opening allows easy reagent addition, thermometer insertion, and stirring access. Borosilicate glass Griffin beakers at MBP conform to ASTM E960. Griffin style is the default beaker for most bench workflows; choose tall-form (Berzelius) only when a tall liquid column is required for distillation or titration setups.
&nbsp;
<h2 dir="ltr">&nbsp;What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Versatile volume ranges from 10mL to 5000mL for any scale.
</li>
<li dir="ltr" aria-level="1">
Molded Graduations for permanent, wear-resistant scale visibility.
</li>
<li dir="ltr" aria-level="1">
Printed Graduations providing high-contrast markings for quick reading.
</li>
<li dir="ltr" aria-level="1">
Durable Griffin Style design with a flat base and easy-pour spout.
</li>
<li dir="ltr" aria-level="1">
Case Pack options for high-volume laboratory stocking.
</li>
<li dir="ltr" aria-level="1">
High-quality borosilicate glassware compatible with various chemicals.
</li>
</ul>
&nbsp;
<h2 data-section-id="tdvfh2" data-start="857" data-end="895">How to Choose Griffin Style Beakers</h2>
&nbsp;
Size Selection
MBP stocks Griffin style beakers from 10 mL to 5,000 mL. Common bench sizes include 50 mL and 100 mL for small-scale reactions and staining, 250 mL for routine buffer work, 1,000 mL for media or reagent preparation, and 2,000 mL for larger-volume batches. As a general guideline, beakers should be filled to no more than two-thirds of their nominal capacity when heating to allow for liquid expansion and prevent boil-over.
Graduation: Molded vs. Printed
Molded graduations are permanently embossed into the glass and are resistant to solvents, autoclaving, and repeated cleaning cycles. Printed dual-scale graduations provide higher contrast for quick bench reading but may fade over time with repeated autoclaving or exposure to aggressive solvents.
Borosilicate Glass
Griffin style beakers at MBP are made from borosilicate glass, which is resistant to acids, bases, alcohols, and most organic solvents, and is autoclavable at 121&deg;C. Its low thermal expansion coefficient (~3.3&times;10⁻⁶/K) helps prevent cracking during rapid heating or cooling.
Case Pack Availability
High-volume laboratories can order Griffin style beakers in case packs to reduce per-unit cost. Case pricing varies by size and is available upon request from MBP.
&nbsp;
<h2 data-section-id="1jl751w" data-start="2883" data-end="2908">Specifications Context</h2>
&nbsp;
Griffin style (low form) glass beakers conform to ASTM E960 with graduation accuracy of &plusmn;5% of total capacity. The low height-to-diameter ratio provides greater stability than tall-form beakers on stirrers and hot plates. Borosilicate glass is inert to HCl, H₂SO₄, HNO₃, CH₃COOH, NaOH, acetone, ethanol, methanol, and xylene. Hydrofluoric acid (HF) must not be used with glass as it dissolves silica-based materials. These beakers are suitable for autoclaving at 121&deg;C (wet cycle) and dry-heat sterilisation up to 500&deg;C.
<a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;">Get a quick quote from the friendly staff at MBP</a> right now to keep your workflow running smoothly.

Griffin Style Beakers

Globe Glass - Catalog

Brochure

Globe Glass Griffin Style Beakers - Heavy Duty Specifications

Globe Glass Heavy Duty Low Form Griffin Style Beakers

Globe Scientific 8020250 Globe Glass® 250 mL heavy-duty Griffin style beaker. ASTM E438 Type I, Class A 3.3 borosilicate; ASTM E960 Type II wall. Dual-scale white enamel graduations (25–200 mL, 25 mL intervals). 95 mm H × 67 mm OD. 12/box.

Beaker, Globe Glass, 250mL, Low Form Griffin Style,Heavy Duty, Dual Graduations, ASTM E960, 12/Box, CS/48

Beaker, Globe Glass, 400mL, Low Form Griffin Style, Heavy Duty, Dual Graduations, ASTM E960, 12/Box, CS/48

Beaker, Globe Glass, 600mL, Low Form Griffin Style, Heavy Duty, Dual Graduations, ASTM E960, 6/Box, CS/36

Beaker, Globe Glass, 1000mL, Low Form Griffin Style, Heavy Duty, Dual Graduations, ASTM E960, 6/Box, CS/24

Beaker, Globe Glass, 2000mL, Low Form Griffin Style, Heavy Duty, Dual Graduations, ASTM E960, 4/Box, CS/8

Beaker, Globe Glass, 4000mL, Low Form Griffin Style, Heavy Duty, Dual Graduations, ASTM E960, 1/Box, CS/4

GlassGuard Packaging - Brochure

Globe Glass Griffin Style Beakers Specifications

Globe Glass Low Form Griffin Style Beakers

8010010 by Globe Scientific is a 10mL low-form Griffin-style borosilicate glass beaker manufactured from 3.3 borosilicate glass meeting ASTM E960 specifications. Featuring uniform wall thickness, beaded rims for chipping resistance, a formed pour spout, and graduated volume markings, these beakers are the standard-format vessel for heating, mixing, and transferring small volumes of laboratory reagents, solutions, and chemical reactions on the bench and hot plate.

Beaker, Globe Glass, 10mL, Low Form Griffin Style, ASTM E960, 12/Box, CS/48

Beaker, Globe Glass, 20mL, Low Form Griffin Style, Dual Graduations, ASTM E960, 12/Box, CS/48

Beaker, Globe Glass, 30mL, Low Form Griffin Style, Dual Graduations, ASTM E960, 12/Box, CS/48

Beaker, Globe Glass, 50mL, Low Form Griffin Style, Dual Graduations, ASTM E960, 12/Box, CS/48

Beaker, Globe Glass, 100mL, Low Form Griffin Style, Dual Graduations, ASTM E960, 12/Box, CS/48

Beaker, Globe Glass, 150mL, Low Form Griffin Style, Dual Graduations, ASTM E960, 12/Box, CS/48

Beaker, Globe Glass, 250mL, Low Form Griffin Style, Dual Graduations, ASTM E960, 12/Box, CS/48

Beaker, Globe Glass, 400mL, Low Form Griffin Style, Dual Graduations, ASTM E960, 12/Box, CS/48

Beaker, Globe Glass, 600mL, Low Form Griffin Style, Dual Graduations, ASTM E960, 6/Box, CS/36

Beaker, Globe Glass, 800mL, Low Form Griffin Style, Dual Graduations, ASTM E960, 6/Box, CS/24

Beaker, Globe Glass, 1000mL, Low Form Griffin Style, Dual Graduations, ASTM E960, 6/Box, CS/24

Beaker, Globe Glass, 2000mL, Low Form Griffin Style, Dual Graduations, ASTM E960, 4/Box, CS/8

Beaker, Globe Glass, 4000mL, Low Form Griffin Style, Dual Graduations, ASTM E960, 1/Box, CS/6

Laboratory Essentials

Griffin Style Beakers, Polymethylpentene, Molded Graduations Specifications

Griffin Style PMP (TPX) Graduated Beakers

Globe Scientific 601541 Griffin-style PMP (TPX®) beaker, 25 mL. Molded graduations 5–25 mL (1 mL intervals). Autoclavable at 121°C; max 180°C short-term. 49 mm H × 34 mm OD. ISO 7056-1981(E). 20/pack.

Beaker, PMP (TPX), Molded Graduations, 25mL, CS/20

Beaker, PMP (TPX), Molded Graduations, 25mL, EA

Beaker, PMP (TPX), Molded Graduations, 50mL, CS/20

Beaker, PMP (TPX), Molded Graduations, 50mL, EA

Beaker, PMP (TPX), Molded Graduations, 100mL, CS/12

Beaker, PMP (TPX), Molded Graduations, 100mL, EA

Beaker, PMP (TPX), Molded Graduations, 250mL, CS/16

Beaker, PMP (TPX), Molded Graduations, 250mL, EA

Beaker, PMP (TPX), Molded Graduations, 500mL, CS/12

Beaker, PMP (TPX), Molded Graduations, 500mL, EA

Beaker, PMP (TPX), Molded Graduations, 1000mL, CS/4

Beaker, PMP (TPX), Molded Graduations, 1000mL, EA

Beaker, PMP (TPX), Molded Graduations, 2000mL, CS/4

Beaker, PMP (TPX), Molded Graduations, 2000mL, EA

Beaker, PMP (TPX), Molded Graduations, 3000mL, CS/2

Beaker, PMP (TPX), Molded Graduations, 3000mL, EA

Beaker, PMP (TPX), Molded Graduations, 5000mL, CS/2

Beaker, PMP (TPX), Molded Graduations, 5000mL, EA

Beaker, PMP (TPX), Printed Graduations, 25mL, CS/20

Beaker, PMP (TPX), Printed Graduations, 25mL, EA

Beaker, PMP (TPX), Printed Graduations, 50mL, CS/20

Beaker, PMP (TPX), Printed Graduations, 50mL, EA

Beaker, PMP (TPX), Printed Graduations, 100mL, CS/12

Beaker, PMP (TPX), Printed Graduations, 100mL, EA

Beaker, PMP (TPX), Printed Graduations, 250mL, CS/16

Beaker, PMP (TPX), Printed Graduations, 250mL, EA

Beaker, PMP (TPX), Printed Graduations, 500mL, CS/12

Beaker, PMP (TPX), Printed Graduations, 500mL, EA

Beaker, PMP (TPX), Printed Graduations, 1000mL, CS/4

Beaker, PMP (TPX), Printed Graduations, 1000mL, EA

Beaker, PMP (TPX), Printed Graduations, 2000mL, CS/4

Beaker, PMP (TPX), Printed Graduations, 2000mL, EA

Beaker, PMP (TPX), Printed Graduations, 3000mL, CS/2

Beaker, PMP (TPX), Printed Graduations, 3000mL, EA

Beaker, PMP (TPX), Printed Graduations, 5000mL, CS/2

Beaker, PMP (TPX), Printed Graduations, 5000mL, EA

Polypropylene Griffin Style Beakers, Graduated

Griffin Style PP Graduated Beakers

601801 by Globe Scientific are Griffin Style PP Graduated Beakers — low-form polypropylene, tapered pour spout, sidewall volume graduations, autoclavable, breakage-resistant. Suitable for mixing, measuring, and solution preparation across general laboratory workflows.

Beaker, PP, Molded Graduations, 25mL, CS/20

Beaker, PP, Molded Graduations, 25mL, EA

Beaker, PP, Molded Graduations, 50mL, CS/20

Beaker, PP, Molded Graduations, 50mL, EA

Beaker, PP, Molded Graduations, 100mL, CS/12

Beaker, PP, Molded Graduations, 100mL, EA

Beaker, PP, Molded Graduations, 250mL, CS/16

Beaker, PP, Molded Graduations, 250mL, EA

Beaker, PP, Molded Graduations, 500mL, CS/12

Beaker, PP, Molded Graduations, 500mL, EA

Beaker, PP, Molded Graduations, 1000mL, CS/4

Beaker, PP, Molded Graduations, 1000mL, EA

Beaker, PP, Molded Graduations, 2000mL, CS/4

Beaker, PP, Molded Graduations, 2000mL, EA

Beaker, PP, Molded Graduations, 3000mL, CS/2

Beaker, PP, Molded Graduations, 3000mL, EA

Beaker, PP, Molded Graduations, 5000mL, CS/2

Beaker, PP, Molded Graduations, 5000mL, EA

Beaker, PP, Printed Graduations, 25mL, CS/20

Beaker, PP, Printed Graduations, 25mL, EA

Beaker, PP, Printed Graduations, 50mL, CS/20

Beaker, PP, Printed Graduations, 50mL, EA

Beaker, PP, Printed Graduations, 100mL, CS/12

Beaker, PP, Printed Graduations, 100mL, EA

Beaker, PP, Printed Graduations, 250mL, CS/16

Beaker, PP, Printed Graduations, 250mL, EA

Beaker, PP, Printed Graduations, 500mL, CS/12

Beaker, PP, Printed Graduations, 500mL, EA

Beaker, PP, Printed Graduations, 1000mL, CS/4

Beaker, PP, Printed Graduations, 1000mL, EA

Beaker, PP, Printed Graduations, 2000mL, CS/4

Beaker, PP, Printed Graduations, 2000mL, EA

Beaker, PP, Printed Graduations, 3000mL, CS/2

Beaker, PP, Printed Graduations, 3000mL, EA

Beaker, PP, Printed Graduations, 5000mL, CS/2

Beaker, PP, Printed Graduations, 5000mL, EA

Pitchers with Molded Graduations

Globe Scientific 601156 500 mL translucent PP lab pitcher. Permanent molded graduations; molded-in handle with ergonomic thumb grip; no-drip pour spout. Autoclavable 121°C/20 min. Chemical resistant. Case of 60.

Beaker with Handle, PP, Molded Graduations, 500mL, CS/60

Beaker with Handle, PP, Molded Graduations, 500mL, EA

Beaker with Handle, PP, Molded Graduations, 1000mL, CS/48

Beaker with Handle, PP, Molded Graduations, 1000mL, EA

Beaker with Handle, PP, Molded Graduations, 2000mL, CS/36

Beaker with Handle, PP, Molded Graduations, 2000mL, EA

Beaker with Handle, PP, Molded Graduations, 3000mL, CS/27

Beaker with Handle, PP, Molded Graduations, 3000mL, EA

Beaker with Handle, PP, Molded Graduations, 5000mL, CS/12

Beaker with Handle, PP, Molded Graduations, 5000mL, EA

Weigh Dish Brochure

Tri-Corner Beakers Specifications

Tri-Corner Beakers

3630 by Globe Scientific is a clarified polypropylene tri-corner beaker with three built-in pouring spouts, in sizes from 50mL to 1000mL. Graduated in mL; autoclavable; chemically resistant to acids, solvents, and alkalis. Durable for repeated use; inexpensive enough for single-use.

Beaker, Three Corner, Clarified PP, Graduated, 50mL, CS/100

Beaker, Three Corner, Clarified PP, Graduated, 100mL, CS/100

Beaker, Three Corner, Clarified PP, Graduated, 250mL, CS/100

Beaker, Three Corner, Clarified PP, Graduated, 400mL, CS/100

Beaker, Three Corner, Clarified PP, Graduated, 800mL, CS/100

Beaker, Three Corner, Clarified PP, Graduated, 1000mL, CS/100

Tri-Corner Beakers - Economy Style Specifications

Tri-Corner Beakers - Economy Style

3640 by Globe Scientific — 50 mL economy polypropylene tri-corner beaker with three dripless pour spouts, molded metric graduations, and autoclavable PP construction. 100 per case. Available in 50–1,000 mL (SKUs 3640–3645). Ships worldwide from MBP Inc.