Benchmark Scientific

Erlenmeyer Flasks

Erlenmeyer Shaker Flasks, Styrene Butadiene, baffled bottom w / vented screw cap

Material

Cap Filter

Sterilization

Packing

Sizes

Flask, Erlenmeyer/Fernbach, Styrene Butadiene, 2.8L, baffled bottom w / vented screw cap, Sterile, Indiv wrapped, 6 / CS

Flask,  Erlenmeyer/Fernbach, Styrene Butadiene,5.0L, baffled bottom w / vented screw cap, Sterile, Indiv wrapped, 4 / Styrene Butadiene, ..5.0 liter, baffled bottom w / vented screw cap, Sterile, Indiv wrapped, 4 / CS

Dry Baths Accessories

<h2>What Are Dry Bath Incubator Accessories?</h2>
&nbsp;
Dry bath accessories are the secondary components that extend or optimize the functionality of a dry block heater: aluminum insert blocks that define the tube format capacity; heated lids that eliminate condensation; external temperature reference probes for calibration verification; and carrying and storage cases for portability. Because the aluminum insert block physically determines which tube formats the dry bath can process, insert block selection is the single most impactful purchase decision after the base unit itself. Most manufacturers supply one insert format as standard with the base unit; labs processing multiple tube formats must purchase additional inserts separately. Select accessories based on the tube formats used in your primary protocols, confirming that inserts are brand- and model-compatible before ordering.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Specialized Heating Blocks: High-conductivity aluminum blocks tailored for everything from 0.2ml PCR strips and 1.5ml centrifuge tubes to larger 50ml conical vessels.
</li>
<li dir="ltr" aria-level="1">
Custom &amp; Solid Block Options: Versatile solid blocks suitable for slides or custom machining, alongside blocks specifically drilled for HPLC vials and cuvettes.
</li>
<li dir="ltr" aria-level="1">
Precision Monitoring &amp; Power: External temperature probes for direct sample tracking and 12V vehicle adapters to maintain thermal control during mobile laboratory work.
</li>
</ul>
&nbsp;
<h2>How to Choose Dry Bath Accessories</h2>
&nbsp;
Aluminum insert blocks: format selection
Insert blocks are precision-machined from aluminum to accept specific tube formats with tight well tolerances (typically within plus or minus 0.1 mm of the tube's outer diameter). Common formats include: 24 wells for 0.5 mL tubes; 15-16 wells for 1.5 mL microcentrifuge tubes; 12-15 wells for 2 mL microcentrifuge tubes; 8-strip configuration for 0.2 mL PCR strip tubes; 12 wells for 15 mL conical tubes; 6 wells for 50 mL conical tubes; and a flat surface (no wells) for microplates or irregular vessels. Inserts are not universally interchangeable across brands; confirm the insert fits the specific dry bath model's block holder dimensions and, for models with auto-recognition, that the insert carries the required auto-recognition contact.
Insert material and thermal conductivity.
Aluminum (Al 6061 alloy) is the standard material for dry bath inserts due to its high thermal conductivity (approximately 167 W/m K), low density, and machinability for tight tolerances. Some specialty inserts for aggressive chemical applications use hard-anodized aluminum or stainless steel, with lower thermal conductivity but better chemical resistance. Always use manufacturer-supplied or manufacturer-approved aluminum inserts; after-market inserts with inferior tolerances reduce thermal contact and degrade temperature uniformity.
Heated lid accessories
Heated lid accessories for dry baths are sold separately for many base unit models or as an upgrade kit. When selecting a heated lid, confirm: (1) it fits the specific block footprint and height of your dry bath model; (2) the lid temperature range covers the required anti-condensation temperature (typically 60-110 degrees C); (3) the lid temperature is independently controlled from the block; and (4) the lid surface material is non-reactive with samples. For protein and enzyme protocols, a lid temperature 5-10 degrees C above the block temperature is the typical starting point.
External temperature reference probe
An external calibration probe (typically a thin RTD or thermocouple probe rated for direct insertion into a tube well, connected to a calibrated digital reference thermometer) verifies that the temperature inside the well matches the instrument's displayed setpoint. External probe verification is required for GLP-compliant and regulated laboratory protocols (ISO 9001, CLIA, cGxP) and is good practice annually for any research dry bath. Confirm that the probe diameter fits the insert well format (most probes are 2-5 mm diameter; well diameter varies by tube format) before ordering.
Carrying case for portable dry baths
Mini and portable dry bath models (Labnet PR1MA Mini, and similar) are available with dedicated carrying cases for field applications: point-of-care diagnostics, on-site environmental sampling, and field isothermal PCR or LAMP assays using a 12 V DC automotive power adapter. Carrying cases provide impact protection, secure block holder positioning, and cable management for field use.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Aluminum insert block well tolerances of plus or minus 0.1 mm ensure full circumferential contact between the tube outer wall and the block well, maximizing heat transfer and minimizing temperature gradients between the sample and the block setpoint. A loose-fitting insert with 0.5 mm or more of air gap between tube and well reduces heat transfer and can introduce a temperature lag of 1-3 degrees C compared to the block setpoint, systematically underheating samples. Heated lid accessories eliminate condensation-related volume errors of 5-15% that can occur in short (&lt;10 microliter) enzyme reactions at 37-55 degrees C over 30-60 minute incubations. Auto-recognized interchangeable block inserts (where the dry bath unit automatically detects which format insert is installed) are a standard feature on Labnet and similar mid-range dry bath models, improving setup speed and reducing configuration errors.&nbsp;
&nbsp;
Enhance your dry bath setup today&mdash;check out our full range of blocks and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a quote.

External Temperature Probe

The BSH-TP1 by Benchmark Scientific is an external temperature probe for the myBlock Mini (BSH200) and IsoBlock dry baths. It monitors actual sample temperature inside the tube and feeds the reading to the control circuit, enabling sample-level temperature regulation rather than block surface control alone.

Manufacture

Incubators Accessories

<h2>What Are Lab Incubator Accessories?</h2>
&nbsp;
Laboratory incubator accessories are replacement components, add-on attachments, and optional modules that extend the function of a CO2 incubator, microbiological incubator, shaking incubator, or refrigerated incubator beyond its out-of-the-box configuration. They fall into three broad groups: (1) interior organization (shelving, racks, rotisseries, and slides that configure usable chamber space for specific vessel types); (2) maintenance and calibration (CO2 sensor modules, humidity trays, HEPA filter assemblies, door gaskets, and temperature probes that keep the incubator in specification over time); and (3) contamination control (UV light replacement bulbs, anti-corrosion coating kits, and decontamination accessories that reduce microbial contamination risk in multi-user incubators). Using genuine replacement parts is important for CO2 sensors and HEPA filters in particular, as third-party substitutes may not meet the accuracy or fit specifications required for regulated laboratory workflows. Incubator accessories fall into three categories: organization (shelves, racks), maintenance (sensors, filters, gaskets), and contamination control (UV lamps, decontamination kits); buy the first two on a scheduled basis and the third on an as-needed basis.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Extra plastic shelving provides a 10.5 x 8" surface area, perfect for adding a tier of storage for non-autoclavable tasks.
</li>
<li dir="ltr" aria-level="1">
Precision-fit design ensures the shelf slides perfectly into your H2200 series units for immediate use without any complicated setup.
</li>
</ul>
&nbsp;
<h2>How to Choose Incubator Accessories</h2>
&nbsp;
Shelving and interior organization
Stainless steel shelves are the most common incubator accessory, adding usable positions without a new unit. Wire-grid shelves allow better air circulation than solid shelves in forced-air incubators, which is important for temperature uniformity when the incubator is fully loaded. Confirm the shelf load rating in kg before stacking heavy culture bottles on a single shelf. Tube racks, slide holders, rotisseries, and microplate stacking frames are available for specific vessel formats.
CO2 sensor modules
CO2 incubators use either thermal conductivity (TC) or infrared (IR) sensors to measure CO2 concentration. TC sensors are less expensive but drift over time and require recalibration after each door opening. IR sensors are more stable, respond faster, and are preferred for high-frequency-access incubators. Replacement CO2 sensor modules are model-specific; always reference the exact incubator model number when ordering.
HEPA filters and air handling
Incubators with forced HEPA-filtered air circulation require periodic filter replacement (typically every 6 to 12 months under continuous use) to maintain the contamination barrier. A clogged HEPA filter reduces airflow, compromises temperature uniformity, and eventually trips an alarm. Replace on the manufacturer's recommended schedule, not on a reactive basis.
Door gaskets and seals
Door gaskets maintain the CO2 and humidity environment inside the chamber. Worn or cracked gaskets allow CO2 leakage, requiring the incubator to run the CO2 supply continuously and potentially causing pH drift in cultures. Inspect door seals quarterly and replace annually or at the first sign of deformation. Gaskets are model-specific; order using the exact incubator model number.
Humidity trays and water pans
CO2 incubators rely on an open water pan to maintain 90% to 95% relative humidity. Clean and refill the humidity tray weekly with sterile deionized water to prevent fungal and bacterial contamination of the water reservoir. Copper water pans (available for some models) reduce microbial growth in the tray compared to stainless steel.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
When sourcing replacement parts, always use the incubator manufacturer's part number, not just a generic description. Extra shelves, CO2 sensors, HEPA filters, and door gaskets from third-party suppliers may not meet the dimensional or performance tolerances of the original equipment. For incubators operating under GLP, GMP, or ISO 17025 frameworks, use only manufacturer-qualified replacement parts and document each replacement in the equipment logbook. Temperature probes used for incubator calibration verification should be traceable to NIST or equivalent national standards.&nbsp;
&nbsp;
Need a bit more room for your research? Check out our shelf options and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a friendly quote today.

Incubator Accessories

Extra Shelf 10.5 x 8"

The H2200-SH by Benchmark Scientific is a 10.5 × 8 in plastic extra shelf for the myTemp Mini Digital Incubator (H2200-H and H2200-HC). Non-autoclavable. Adds a third storage level inside the 20 L myTemp Mini chamber.

Extra Shelf, 12.0 x 15.0", stainless steel

H2265-SH by Benchmark Scientific is a 12.0 × 15.0 in stainless steel shelf designed specifically for the MyTemp™ 65 Heating and Cooling Incubator (H2265-HC). Adding this shelf increases usable interior tiers to accommodate more flasks, bottles, tubes, and plates without overcrowding or disrupting airflow. Autoclavable stainless steel construction; sold individually.

Extra Shelf, stainless steel, for H2505-130

The H2505-130SH by Benchmark Scientific is a stainless steel extra shelf designed exclusively for the H2505-130 SureTemp Dual Convection 130L Incubator. Adds a full additional interior storage level for flasks, plates, tubes, and culture vessels.

Extra Shelf, stainless steel, for H2505-40

H2505-40SH by Benchmark Scientific is an additional stainless steel shelf designed exclusively for the H2505-40 SureTemp™ 40 L Dual Convection Incubator. It allows operators to subdivide the 13.7 × 13.7 × 13.7 in. interior into more configuration zones, fitting shorter vessels on multiple levels. Order by catalog number H2505-40SH via Quick Order at mbpinc.net/quickorder or contact customerservice@mbpinc.net.

Extra Shelf, stainless steel, for H2505-70

H2505-70SH by Benchmark Scientific is an extra stainless-steel shelf for the SureTemp™ Dual Convection Incubator H2505-70 (70 L). It adds a shelf position inside the H2505-70's 45 × 35 × 45 cm stainless-steel (316) interior to increase capacity for flasks, tubes, or plates during incubation. Sold separately from the H2505-70 incubator.

Shaking Incubator Accessories

<h2>What Are Shaking Incubator Accessories?</h2>
&nbsp;
Shaking incubator accessories are platform attachments and replacement components that secure culture vessels to the shaking deck, expand the range of vessel types a single incubator can accommodate, and maintain safe operation at high agitation speeds. The primary accessories are flask clamps (spring-type or magnetic-attachment systems) for Erlenmeyer flasks of specific volumes, tube racks for culture tubes and centrifuge tubes, microplate holders for 24-well, 96-well, and deep-well plate formats, universal platforms with non-slip surfaces for various container types, and adhesive mats for securing irregularly shaped vessels. Accessories are not universally interchangeable: platform slot patterns, clamp arm geometry, and attachment mechanisms vary by manufacturer and model, so confirm compatibility with the specific shaking incubator before ordering. Always match the flask clamp size to the exact flask volume in use; undersized clamps allow movement that damages cultures, and oversized clamps do not seat correctly in platform slots.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">MultiTherm Touch blocks offer specialized holders for cryotubes, PCR plates, and centrifuge tubes up to 5ml.</li>
<li dir="ltr" role="presentation">Microplate blocks provide secure, uniform agitation for standard and deep-well 96-well plates.</li>
<li dir="ltr" role="presentation">Universal spring platforms offer a flexible solution for holding various bottle and flask sizes on a single surface.</li>
<li dir="ltr" role="presentation">Precision tube adapters allow you to mix 0.2ml to 2.0ml tubes with perfect stability and heat transfer.</li>
<li dir="ltr" role="presentation">Stainless steel shelves help you maximize your incubator&rsquo;s internal capacity for static or upright samples.</li>
</ul>
&nbsp;
<h2>How to Choose Shaking Incubator Accessories</h2>
&nbsp;
Flask clamp size and type
Flask clamps are specified by flask volume: 50 mL, 125 mL, 250 mL, 500 mL, 1 L, and 2 L are the standard sizes. One-piece stainless steel clamp construction is preferable to spot-welded or riveted designs for durability at high agitation speeds. For flasks 2 L and above, clamps with a secondary girdle ring provide additional security during prolonged shaking at 200 rpm or above. Magnetic clamp systems (such as MAGic Clamp-style designs) allow tool-free, rapid exchange between flask sizes without loosening bolts.
Tube racks
Tube racks for shaking incubators accommodate standard 10 mL, 14 mL, 17 mL, 50 mL, and culture tube formats, slotted into the platform deck. Adjustable tube racks that fit multiple tube diameters offer more flexibility than fixed-diameter designs. Confirm the number of tube positions and whether the rack base fits the specific platform slot pattern of your incubator.
Microplate holders
Microplate holders secure 96-well, 24-well, deep-well (2 mL per well), and skirted PCR plate formats to the shaking platform. Platforms designed for microplates typically operate at smaller orbit sizes (19 mm) and higher speeds (up to 400 rpm) compared to flask platforms. Confirm that the holder is rated for the plate format and the speed required by your protocol.
Universal platforms and adhesive mats
Universal platforms with rubber-coated surfaces provide a non-slip base for tissue culture flasks (T-25, T-75), Petri dishes, staining trays, and containers that do not fit standard clamps. Adhesive mats function similarly and are useful for microcentrifuge tube arrays or multiple small containers. Replace adhesive mats periodically as tackiness degrades with repeated use and autoclaving.
Platform compatibility
Before purchasing accessories, identify the platform slot pattern (tab-and-slot vs. screw-mount vs. magnetic) specific to your shaking incubator model. Accessories from the same manufacturer as the incubator are the safest choice; third-party platforms may fit universal tab-and-slot patterns, but should be verified before high-speed use.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Stainless steel flask clamps are the preferred material for autoclavability and chemical resistance. Verify whether accessories can be autoclaved at 121 degrees C; not all rubber or plastic components on tube racks and mats withstand repeated steam sterilization. The load capacity of the platform (in kg per position) limits the total mass of vessel plus culture volume that can be safely agitated; exceeding this limit at high speed stresses the drive bearings. For heavy-use labs running continuous 24-hour shaking protocols, select clamps with single-piece construction and check the drive belt or brushless motor specifications for continuous-duty cycle ratings.&nbsp;
&nbsp;
Ready to optimize your incubator&rsquo;s capacity? Browse our accessories collection and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a friendly quote today.

Extra Stainless Steel Shelf

The H2300-SH by Benchmark Scientific is an extra stainless steel shelf (10.5 × 8 in / 26.7 × 20.3 cm) designed for the H2300-HC2 MyTemp Mini CO2 benchtop incubator. Autoclavable for sterile installation between culture runs. Available from MBP Inc. for cell culture labs across the USA and Canada.

Electrophoresis System Accessories

Extra casting set for 10.5x10cm and 10.5x6cm gels. Includes stand, trays, E1101-COMB1 double-sided combs

E1200-CS1 by Accuris Instruments is an extra casting set for the myGel™ E1101 electrophoresis system, covering 10.5 × 10 cm and 10.5 × 6 cm gel formats. Includes casting stand, gel trays for both formats, and E1101-COMB1 double-sided multichannel-compatible combs. Ideal for parallel gel preparation or replacement of worn E1101 casting components. Order at mbpinc.net using SKU E1200-CS1.

Nano Spectrophotometer Accessories

<h2>What Are Nano Spectrophotometer Accessories?</h2>
&nbsp;
Nano spectrophotometer accessories maintain measurement accuracy, extend the instrument's application range, and support compliance in regulated laboratory environments. They fall into three categories: consumables (cleaning supplies used between every sample measurement), application accessories (microvolume cuvette adapters, fluorometry modules, and assay reagent kits that expand measurement capability), and qualification and compliance accessories (calibration verification kits, performance qualification documentation packages, and software modules for GLP/21 CFR Part 11 data integrity). Cleaning consumables are the highest-turnover accessory type and the most critical for measurement quality: residual sample on the measurement pedestal between readings causes carryover, elevated A260/A280 ratios from nucleic acid contamination, and falsely elevated protein concentrations. Instrument-specific lint-free wipes (not standard lab tissues, which leave fibers) are required for a clean wipe-down of the pedestal between samples. The single most impactful accessory for nano spectrophotometer accuracy is the correct lint-free wipe used between every sample and every blank; inadequate pedestal cleaning between reads is the leading cause of inaccurate measurements.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Specialized 0.5mL tubes packaged in sets of 250, engineered to ensure clear light paths for highly sensitive fluorometric assays.
</li>
<li dir="ltr" aria-level="1">
High-quality replacement cuvettes for traditional macro-volume spectroscopy verification alongside microvolume testing.
</li>
<li dir="ltr" aria-level="1">
Formulated explicitly for SmartDrop systems to provide precise, high-sensitivity fluorometric nucleic acid concentration measurements.
</li>
<li dir="ltr" aria-level="1">
A vital optical maintenance formula that restores hydrophobic properties to the pedestal surface, ensuring perfect sample droplet formation.
</li>
<li dir="ltr" aria-level="1">
Replacement thermal paper sets to keep your automated internal printers operating for immediate on-bench data logging.
</li>
</ul>
&nbsp;
<h2>How to Choose Nano Spectrophotometer Accessories</h2>
&nbsp;
Pedestal cleaning wipes and tissues
Optical-grade, lint-free wipes specifically designed for nano spectrophotometer pedestals are the primary consumables. Standard laboratory tissues (Kimwipes) are adequate but may leave very fine fibers that accumulate on the fiber pedestal over time. Instrument-specific wipes designed for the pedestal geometry (flat or curved arm) ensure complete sample removal without scratching the optical surface. Wipe down both the upper and lower pedestal surfaces after every measurement and after every blank. Replace wipes with clean ones between each sample to prevent cross-contamination.
Microvolume cuvette adapters
Microvolume cuvette adapters (such as a micro-cuvette or TrayCell-type accessory) allow nano spectrophotometers with a macro-cuvette port to measure sample volumes of 0.5 to 50 microliters in a path length of 1 to 10 mm. They are used when the sample concentration is below the direct pedestal measurement range (below 2 ng/microliter for dsDNA), and a longer path length is needed to produce measurable absorbance. Confirm that the cuvette adapter is compatible with the specific cuvette measurement mode of the nano spectrophotometer model.
Calibration verification kits
Calibration verification kits contain certified reference standards (solutions of known absorbance at defined wavelengths) used to verify that the instrument's wavelength accuracy and photometric response are within specification. These kits are required for laboratories operating under GLP, ISO 17025, or USP spectrophotometric requirements. Standards include NIST-traceable holmium oxide solution (wavelength calibration standard) and potassium dichromate solution (photometric linearity standard). Verification should be performed at defined intervals specified in the laboratory's quality management system.
Fluorometry assay kits and tubes
Nano spectrophotometers with an integrated fluorometry mode require compatible fluorometric assay kits (high-sensitivity DNA, RNA, or protein quantification assay reagent sets) and appropriate assay tubes or microplates for the fluorometry measurement position. These kits work on the same principle as Qubit-type assays: a fluorescent dye that binds specifically to dsDNA, ssDNA, or RNA produces a signal proportional to analyte concentration. Confirm the kit is specified for the instrument's fluorometry mode and measurement geometry.
Software licenses and validation modules
For regulated environments (pharmaceutical QC, GMP testing, ISO 17025-accredited labs), software licenses that enable 21 CFR Part 11 compliance (audit trails, electronic signatures, data integrity controls) and IQ/OQ/PQ documentation packages are available for most research-grade nano spectrophotometers. These validation packages contain installation qualification (IQ), operational qualification (OQ), and performance qualification (PQ) test scripts and acceptance criteria for the specific instrument model. Confirm the validation package version is compatible with the installed software version before purchase.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Pedestal optical surfaces on nano spectrophotometers are sapphire or quartz fiber, materials that are resistant to most laboratory solvents and cleaning agents but susceptible to physical abrasion from hard particles in standard tissues. Avoid rough tissues, cotton swabs, or abrasive wipes on the pedestal surface. If the pedestal shows persistent background absorbance or drift after normal cleaning, clean with 1:1 isopropanol: water on a lint-free wipe, followed by a dry wipe and a new blank measurement. For stubborn contamination (dried protein, ethidium bromide, phenol), manufacturer-specific cleaning protocols should be followed; using unauthorized solvents on the pedestal can dissolve seals or damage the fiber coating.&nbsp;
&nbsp;
Ready to enhance your microvolume workflows? Explore our full range of Nano Spectrophotometer Accessories and reach out to the <a href="https://mbpinc.net/contact-us">MBP team</a> for a quote today.

Extra paper roll for SmartDrop internal printer, Pk 3

NS1000-PA by Accuris Instruments — pack of 3 replacement thermal paper rolls for the built-in printer of the SmartDrop L (NS1000) nano spectrophotometer. Supports printed hard-copy documentation of absorbance readings for GLP workflows.

Microplate Reader Accessories

<h2>What Are Microplate Reader Accessories?</h2>
&nbsp;
Microplate reader accessories are supplementary components that extend detection range, maintain instrument performance, and support compliance in regulated workflows. They fall into four groups: optical accessories (filters, filter cubes, and polarizers for wavelength selection in fluorescence and absorbance detection); illumination accessories (replacement xenon flash lamps, deuterium lamps, or LED upgrade modules that provide the excitation light source); calibration and validation tools (absorbance validation plates with certified reference values, fluorescence uniformity plates, and luminescence performance standards used to verify reader performance); and automation and software accessories (reagent injectors for kinetic luminescence assays, plate stackers for unattended batch reading, and software module licenses for 21 CFR Part 11 compliance, spectral scanning, or advanced kinetics). Because accessory designs are manufacturer-specific, a filter block designed for one plate reader brand will not fit another; always order accessories using the instrument's model number as the primary specification parameter. Filter sets are the most commonly needed accessory for multi-mode readers; confirm the filter block format and thread size for your specific reader model before ordering, as filter cube dimensions vary significantly between manufacturers and generations.
&nbsp;
<h2 dir="ltr">What you will find: </h2>
<ul>
<li data-section-id="23xybn" data-start="25" data-end="117">Replacement filters and optical accessories for maintaining microplate reader performance.</li>
<li data-section-id="71w1ic" data-start="118" data-end="209">Calibration and validation tools to support accurate and reproducible assay measurements.</li>
<li data-section-id="6jcbpl" data-start="210" data-end="312">Microplates and consumables compatible with absorbance, fluorescence, and luminescence applications.</li>
<li data-section-id="y9aam2" data-start="313" data-end="396">Replacement components and maintenance accessories for routine instrument upkeep.</li>
<li data-section-id="qoq7y7" data-start="397" data-end="523" data-is-last-node="">Accessories designed to support ELISA, cell-based assays, nucleic acid quantification, and other microplate-based workflows.</li>
</ul>
&nbsp;
<h2>How to Choose Microplate Reader Accessories</h2>
&nbsp;
Filter sets for fluorescence and absorbance.
Fluorescence filter sets (excitation filter, dichroic mirror, emission filter) must match both the fluorophore's excitation and emission spectra and the filter cube housing format of the specific reader. Most microplate reader filters use standard 25 mm diameter circular filters; some readers use 12 mm micro-filters. Common fluorescence filter sets: FITC/SYBR Green (Ex 485/12 nm, Em 520/10 nm); DAPI/Hoechst (Ex 360/40 nm, Em 460/40 nm); TRITC/PI (Ex 544/10 nm, Em 620/10 nm); Cy5 (Ex 620/10 nm, Em 680/10 nm). For absorbance, filter-based readers require individual narrow-bandpass filters at the wavelengths required by each assay protocol: 450 nm for ELISA, 595 nm for Bradford, 562 nm for BCA, 260 nm, and 280 nm for nucleic acid and protein.
Replacement lamps
Xenon flash lamps are the standard excitation source in high-quality fluorescence and absorbance microplate readers; typical lamp lifetime is 500 million flashes (approximately 3 to 5 years of daily use). Lamp output decreases gradually before failure; rising CV% in repeated measurements of the same standard is the first sign of lamp degradation. Replacement xenon flash lamps are model-specific; confirm part number from the instrument manual before ordering. Some instrument manufacturers have transitioned to LED-based excitation sources, which have much longer lifetimes (50,000+ hours) and do not require routine lamp replacement.
Calibration and validation plates
Calibration plates contain certified optical standards (neutral density filters, fluorescent reference dyes at known concentrations, or luminescent reference materials) in an SBS-format plate footprint for installation in the plate carriage. They are used to verify photometric accuracy, linearity, and inter-well uniformity (CV% across all 96 or 384 wells). These verifications are required in ISO 17025 accredited labs and GLP/GMP environments, and recommended as best practice for any lab relying on quantitative plate reader data. Validation plates are model-specific and must be re-certified periodically (typically annually) by the manufacturer.
Reagent injectors
Reagent injectors are syringe-pump accessories that dispense a defined volume of reagent into each well of a microplate immediately before or during reading, required for luminescence kinetic assays (luciferase, beta-galactosidase, flash luminescence from coelenterazine), where the signal decays rapidly after reagent addition. Single injectors add one reagent (e.g., luciferase substrate); dual injectors allow sequential addition of two reagents for sequential flash and glow luminescence detection. Injectors are model-specific and must be installed and calibrated by the manufacturer or a qualified service engineer.
Plate stackers and automation accessories
Plate stacker modules load and unload microplates automatically from a tray of 10 to 50 plates, allowing unattended overnight batch reading. Integration with laboratory robotics and LIMS extends this to fully automated plate reading workflows. Plate stackers are model-specific and typically sold as separate accessories from the reader. Confirm that the plate stacker is compatible with the specific plate type (96-well standard, 384-well, with or without sealing film) and the plate loading orientation.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Filter bandpass width (the FWHM of the filter transmission curve) affects sensitivity and selectivity. Narrower bandpass filters (10 nm FWHM) improve selectivity by excluding off-target fluorophore emission but transmit less light, reducing signal. Wider bandpass filters (20 to 40 nm) transmit more light for a brighter signal, but may allow bleed-through from closely overlapping fluorophores. In multiplex assays with two or more fluorophores, narrow bandpass emission filters reduce spectral cross-talk between channels. Optical density (OD) of the blocking region outside the transmission band should be at least OD 5 to OD 6 for fluorescence filters to prevent light leakage from the excitation source from reaching the detector.
&nbsp;
To discuss product availability or get selection guidance,&nbsp;<a href="https://mbpinc.net/contact-us">contact the MBP team</a>.

Extra paper rolls for MR9600-TP printer, pk/4

The MR9600-PA by Accuris (Benchmark Scientific) is a 4-roll pack of replacement direct thermal paper for the Accuris MR9600-TP thermal printer, which connects to the SmartReader 96 MR-9600 microplate absorbance reader. Manufacturer-specified rolls ensure correct fit and print quality in the MR9600-TP printer mechanism.

Filter for Accuris Microplate Reader, 340 nm

Filter for Accuris Microplate Reader, 370 nm

Filter for Accuris Microplate Reader, 380 nm

Filter for Accuris Microplate Reader, 405 nm

Filter for Accuris Microplate Reader, 415 nm

Filter for Accuris Microplate Reader, 420 nm

Filter for Accuris Microplate Reader, 450 nm

Filter for Accuris Microplate Reader, 470 nm

Filter for Accuris Microplate Reader, 492 nm

Filter for Accuris Microplate Reader, 510 nm

Filter for Accuris Microplate Reader, 520 nm

Filter for Accuris Microplate Reader, 532 nm

Filter for Accuris Microplate Reader, 540 nm

Filter for Accuris Microplate Reader, 546 nm

Filter for Accuris Microplate Reader, 560 nm

Filter for Accuris Microplate Reader, 562 nm

Filter for Accuris Microplate Reader, 570 nm

Filter for Accuris Microplate Reader, 578 nm

Filter for Accuris Microplate Reader, 590 nm

Filter for Accuris Microplate Reader, 595 nm

Filter for Accuris Microplate Reader, 600 nm

Filter for Accuris Microplate Reader, 620 nm

Filter for Accuris Microplate Reader, 630 nm

Filter for Accuris Microplate Reader, 650 nm

Filter for Accuris Microplate Reader, 663 nm

Filter for Accuris Microplate Reader, 665 nm

Filter for Accuris Microplate Reader, 680 nm

Filter for Accuris Microplate Reader, 690 nm

Filter for Accuris Microplate Reader, 700 nm

Filter for Accuris Microplate Reader, 750 nm

Calibration plate for MR9600 SmartReader 96

Accuris Microplate Reader Filters

Accuris SmartReader 96, models MR9600 and MR9600-T

Filter for Accuris Microplate Reader

The MR9600-FLT by Accuris (Benchmark Scientific) is a narrowband interference filter for the Accuris SmartReader 96 MR9600 microplate absorbance reader. Available across 26 wavelengths from 340 to 750 nm—including 405, 450, 492, 562, 595, and 630 nm—each filter loads directly into the MR9600 8-position filter wheel to support ELISA, BCA, Bradford, MTS, and other colorimetric assays.