Benchmark Scientific

<h2 data-section-id="16gwf6l" data-start="0" data-end="46">What Are Cold Storage Coolers and Chillers?</h2>
&nbsp;
Laboratory cold storage coolers and chillers are bench-top temperature-control systems designed to keep temperature-sensitive reagents, enzymes, antibodies, cells, and biological samples cold during active laboratory work. They maintain low temperatures&mdash;typically around 0 &deg;C or below freezing&mdash;without requiring ice, electricity (in passive systems), or immediate access to a freezer. These systems are widely used in molecular biology, PCR setup, nucleic acid extraction, enzyme handling, and cell-based assays where maintaining cold-chain conditions during pipetting and multi-step workflows is essential.
Gel-based benchtop coolers are the most common type. They are pre-frozen at approximately &ndash;20 &deg;C and use phase-change materials to maintain samples near 0 &deg;C for several hours, typically up to four hours depending on ambient conditions. This provides a clean, stable, and consistent cooling environment without melting ice or water contamination.
&nbsp;
<h2 dir="ltr">What you will find: </h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Benchtop tube coolers for PCR reagents and enzymes
</li>
<li dir="ltr" aria-level="1">
Cryo tube chillers for 0.2 mL to 2.0 mL tubes
</li>
<li dir="ltr" aria-level="1">
Insulated transport coolers for sample movement
</li>
<li dir="ltr" aria-level="1">
Gel-filled cooling blocks for stable temperature control
</li>
<li dir="ltr" aria-level="1">
Mini coolers for short-term cold storage (2&ndash;8&deg;C range)
</li>
<li dir="ltr" aria-level="1">
Freezer-compatible chillers for sub-zero handling
</li>
<li dir="ltr" aria-level="1">
Rack-style coolers for organized tube placement
</li>
<li dir="ltr" aria-level="1">
Portable cold boxes for field and clinical use
</li>
</ul>
&nbsp;
<h2 data-section-id="1ff2itk" data-start="1171" data-end="1221">How to Choose Cold Storage Coolers and Chillers</h2>
&nbsp;
Tube Format Compatibility
Coolers and chillers are designed around specific laboratory tube formats. Common configurations include holders for 0.2 mL PCR tubes and strips, 1.5/2.0 mL microcentrifuge tubes, 15 mL conical tubes, and 50 mL conical tubes. Some dual-sided designs combine multiple formats in a single unit, allowing simultaneous use for PCR plates on one side and microtubes on the other, improving workflow efficiency and reducing bench clutter.
Temperature Hold and Duration
Passive gel-based coolers maintain approximately 0 &deg;C for several hours after being pre-chilled at &ndash;20 &deg;C. Their performance depends on ambient temperature, workload, and sample frequency. Metal cooling blocks pre-chilled at &ndash;80 &deg;C can achieve lower temperatures temporarily but warm more quickly. For workflows requiring long-duration or continuously controlled cooling, electrically powered thermoelectric chillers provide stable setpoints over extended periods.
Ice-Free vs Ice-Based Systems
Gel-based coolers eliminate the need for ice entirely, reducing condensation, contamination risk, and constant ice replenishment during experiments. Traditional ice buckets remain a low-cost option but require continuous maintenance and can introduce water exposure risks. Ice-free systems are preferred in workflows where moisture control and consistent temperature stability are critical.
Single-Sided vs Dual-Sided Designs
Single-sided coolers are suitable for workflows using one tube format consistently. Dual-sided coolers accommodate multiple formats&mdash;such as PCR plates and microtubes&mdash;within a single unit, making them more versatile for complex molecular biology workflows. Selection depends on workspace constraints and experimental diversity.
Dry Ice Compatibility
Some insulated cold storage systems are designed for use with dry ice, maintaining extremely low temperatures around &ndash;78 &deg;C. These are used for short-term cryogenic handling, transport, or dispensing workflows where ultra-low temperature maintenance is required without active refrigeration.
&nbsp;
<h2 data-section-id="1jl751w" data-start="3892" data-end="3917">Specifications Context</h2>
&nbsp;
Modern gel-based benchtop coolers are engineered using phase-change materials that stabilize near 0 &deg;C for several hours after being pre-conditioned at &ndash;20 &deg;C. Dual-format systems have become increasingly common in molecular biology laboratories because they reduce the number of separate cooling devices required on the bench. As of 2026, these ice-free systems are widely adopted in PCR and nucleic acid workflows due to their consistency, cleanliness, and ease of use compared to traditional ice-based cooling methods.
<a href="https://mbpinc.net/contact-us">Connect with the MBP team</a> today to discuss your specific temperature-hold requirements and find the ideal chiller configuration for your laboratory&rsquo;s daily demands.

Cold Storage Coolers & Chillers

CoolCube™ Microtube and PCR Plate Cooler

Temperature

Capacity (side 1)

Capacity (side 2)

Dimensions (WxDxH)

Weight

Warranty

Microcentrifuge Accessories

<h2>What Are Microcentrifuge Accessories?</h2>
&nbsp;
Microcentrifuge accessories maintain performance, extend tube-format versatility, and ensure safe operation of benchtop microcentrifuges. These include replacement fixed-angle rotors for 12&ndash;24 &times; 1.5/2.0 mL tube positions, tube adapters for 0.5 mL and 0.2 mL formats, aerosol-tight sealed rotor lids for biocontainment of infectious specimens, balance tubes for partial-load runs, and specialty rotors for PCR strips or 5.0 mL tubes where supported by the centrifuge model. All microcentrifuge accessories are model-specific, as rotor coupling systems and tube bore dimensions differ between manufacturers and even between models within the same brand, making exact model verification essential before ordering.
&nbsp;
<h2>What You Will Find:</h2>
&nbsp;
<ul>
<li>High-quality adapters and rotors for precise and reliable tube fit</li>
<li>Multiple formats including PCR strips, microtubes, plates, and spin columns</li>
<li>Specialized and high-capacity rotors for enhanced compatibility</li>
<li>Swing-out and sealed options for reliable and contamination-free processing</li>
</ul>
&nbsp;
<h2>How to Choose Microcentrifuge Accessories</h2>
&nbsp;
Replacement Rotor Identification
The rotor model number is typically printed on the rotor body or listed in the centrifuge user manual. Cross-reference it with the manufacturer's accessory catalog to confirm that the coupling system matches the centrifuge motor shaft. For standard 12-position rotors, verify compatibility with both 1.5 mL and 2.0 mL microtubes.
Tube Adapter Sizing
For 0.5 mL adapters, ensure the outer diameter closely matches the rotor bore so the tube remains secure during operation. For 0.2 mL adapters, confirm that PCR tubes are positioned correctly to achieve the intended centrifugal force while maintaining stability throughout the run.
Aerosol-Tight Sealed Lids
Choose sealed lids rated for the rotor's maximum operating RCF. O-rings should be inspected regularly for flattening, cracking, or discoloration and replaced immediately if any signs of wear appear. Maintaining replacement O-rings for frequently used lids helps ensure continued safe operation.
Specialty Rotors
Some microcentrifuge models support optional rotors for 5.0 mL tubes, PCR strips, or microplates. These accessories expand workflow flexibility but may operate at lower maximum RCF values than standard 1.5 mL rotors. Always verify the rated speed and force limits before use.
Balance Tubes
Balance tubes help maintain proper rotor balance during partial-load runs. They should closely match the mass and dimensions of the sample tubes being processed. Proper balancing reduces vibration, minimizes bearing wear, and supports long-term centrifuge performance.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Many modern fixed-angle rotors and polypropylene adapters are autoclavable, although specific sterilization requirements vary by manufacturer and material. Always follow the OEM maintenance and decontamination guidelines for each accessory. Rotor service life is generally determined by cumulative operating hours and manufacturer recommendations rather than visual appearance alone.
Sealed rotor lid systems with one-touch release mechanisms have become standard in modern molecular diagnostic laboratories, providing improved safety, easier maintenance, and enhanced biocontainment for regulated workflows.
Stop wasting time searching. The best microcentrifuge accessories are right here at MBP Products. <a href="https://mbpinc.net/contact-us">Connect with our expert team</a> to get your equipment accessories today.

Cryovial adapter for C2417-R5 rotor, 8/pk

The C2417-R5-ADP2 by Benchmark Scientific is a pack of 8 × 2ml cryovial adapters for the C2417-R5 rotor of the Benchmark MC-24 Touch High-Speed Microcentrifuge (C2417), enabling centrifugation of standard 2ml cryovial-format samples on the MC-24 Touch platform (13,500 rpm / up to 16,800 xg). Each pack fills all 8 rotor positions for cell pelleting, biobank aliquot processing, and cryovial-format nucleic acid precipitation. Order via mbpinc.net/quickorder using SKU C2417-R5-ADP2 or contact customerservice@mbpinc.net.

Manufacture

Dry Baths Accessories

<h2>What Are Dry Bath Incubator Accessories?</h2>
&nbsp;
Dry bath accessories are the secondary components that extend or optimize the functionality of a dry block heater: aluminum insert blocks that define the tube format capacity; heated lids that eliminate condensation; external temperature reference probes for calibration verification; and carrying and storage cases for portability. Because the aluminum insert block physically determines which tube formats the dry bath can process, insert block selection is the single most impactful purchase decision after the base unit itself. Most manufacturers supply one insert format as standard with the base unit; labs processing multiple tube formats must purchase additional inserts separately. Select accessories based on the tube formats used in your primary protocols, confirming that inserts are brand- and model-compatible before ordering.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Specialized Heating Blocks: High-conductivity aluminum blocks tailored for everything from 0.2ml PCR strips and 1.5ml centrifuge tubes to larger 50ml conical vessels.
</li>
<li dir="ltr" aria-level="1">
Custom &amp; Solid Block Options: Versatile solid blocks suitable for slides or custom machining, alongside blocks specifically drilled for HPLC vials and cuvettes.
</li>
<li dir="ltr" aria-level="1">
Precision Monitoring &amp; Power: External temperature probes for direct sample tracking and 12V vehicle adapters to maintain thermal control during mobile laboratory work.
</li>
</ul>
&nbsp;
<h2>How to Choose Dry Bath Accessories</h2>
&nbsp;
Aluminum insert blocks: format selection
Insert blocks are precision-machined from aluminum to accept specific tube formats with tight well tolerances (typically within plus or minus 0.1 mm of the tube's outer diameter). Common formats include: 24 wells for 0.5 mL tubes; 15-16 wells for 1.5 mL microcentrifuge tubes; 12-15 wells for 2 mL microcentrifuge tubes; 8-strip configuration for 0.2 mL PCR strip tubes; 12 wells for 15 mL conical tubes; 6 wells for 50 mL conical tubes; and a flat surface (no wells) for microplates or irregular vessels. Inserts are not universally interchangeable across brands; confirm the insert fits the specific dry bath model's block holder dimensions and, for models with auto-recognition, that the insert carries the required auto-recognition contact.
Insert material and thermal conductivity.
Aluminum (Al 6061 alloy) is the standard material for dry bath inserts due to its high thermal conductivity (approximately 167 W/m K), low density, and machinability for tight tolerances. Some specialty inserts for aggressive chemical applications use hard-anodized aluminum or stainless steel, with lower thermal conductivity but better chemical resistance. Always use manufacturer-supplied or manufacturer-approved aluminum inserts; after-market inserts with inferior tolerances reduce thermal contact and degrade temperature uniformity.
Heated lid accessories
Heated lid accessories for dry baths are sold separately for many base unit models or as an upgrade kit. When selecting a heated lid, confirm: (1) it fits the specific block footprint and height of your dry bath model; (2) the lid temperature range covers the required anti-condensation temperature (typically 60-110 degrees C); (3) the lid temperature is independently controlled from the block; and (4) the lid surface material is non-reactive with samples. For protein and enzyme protocols, a lid temperature 5-10 degrees C above the block temperature is the typical starting point.
External temperature reference probe
An external calibration probe (typically a thin RTD or thermocouple probe rated for direct insertion into a tube well, connected to a calibrated digital reference thermometer) verifies that the temperature inside the well matches the instrument's displayed setpoint. External probe verification is required for GLP-compliant and regulated laboratory protocols (ISO 9001, CLIA, cGxP) and is good practice annually for any research dry bath. Confirm that the probe diameter fits the insert well format (most probes are 2-5 mm diameter; well diameter varies by tube format) before ordering.
Carrying case for portable dry baths
Mini and portable dry bath models (Labnet PR1MA Mini, and similar) are available with dedicated carrying cases for field applications: point-of-care diagnostics, on-site environmental sampling, and field isothermal PCR or LAMP assays using a 12 V DC automotive power adapter. Carrying cases provide impact protection, secure block holder positioning, and cable management for field use.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Aluminum insert block well tolerances of plus or minus 0.1 mm ensure full circumferential contact between the tube outer wall and the block well, maximizing heat transfer and minimizing temperature gradients between the sample and the block setpoint. A loose-fitting insert with 0.5 mm or more of air gap between tube and well reduces heat transfer and can introduce a temperature lag of 1-3 degrees C compared to the block setpoint, systematically underheating samples. Heated lid accessories eliminate condensation-related volume errors of 5-15% that can occur in short (&lt;10 microliter) enzyme reactions at 37-55 degrees C over 30-60 minute incubations. Auto-recognized interchangeable block inserts (where the dry bath unit automatically detects which format insert is installed) are a standard feature on Labnet and similar mid-range dry bath models, improving setup speed and reducing configuration errors.&nbsp;
&nbsp;
Enhance your dry bath setup today&mdash;check out our full range of blocks and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a quote.

Custom drilling for BSW01 (sold separately), up to 36 holes

BSW01-DR by Benchmark Scientific is a custom-drilling service for the BSW01 solid aluminum dry-bath block (sold separately as SKU BSW01), drilling up to 36 holes to a customer-specified pattern and tube diameter. The resulting block fits Benchmark BSH1001, BSH1002, and BSH1004 digital dry baths and accommodates non-standard tube formats, specialty vials, or custom labware not available in the standard block range. Contact MBP with your hole specifications before ordering: <a href="mailto:customerservice@mbpinc.net">customerservice@mbpinc.net</a> or +1 416-549-8100.

DRYCHILL™ ICE-FREE COOLING BLOCKS

Ice-free, stable cooling for sample tubes\r\nUnique design reduces condensation

Capacity

Dimensions (DC9602 + DC4020)

Dimensions (DC0650 + DC1215)

DryChill™ Ice-free Cooling Block, 96 x 0.2ml

DryChill™ Ice-free Cooling Block, 40 x 1.5/2.0ml

DryChill™ Ice-free Cooling Block, 12 x 15ml

DryChill™ Ice-free Cooling Block, 6 x 50ml

Orbital Shaker Accessories

<h2>What are orbital shaker accessories?</h2>
&nbsp;
Orbital shaker accessories are the platform attachments and holders that secure specific vessel types to a shaker platform during operation. Erlenmeyer flasks typically require spring-clip clamps that hold the flask securely while allowing unrestricted liquid movement, microplates use dedicated plate holders, tube rack inserts accommodate centrifuge and microcentrifuge tubes, and non-slip mats provide flexible placement for vessels during lower-speed mixing applications.
&nbsp;
<h2>What you will find:</h2>
&nbsp;
<ul>
<li>
Dedicated Flask Platforms: Pre-configured platforms designed to securely hold specific sizes of Erlenmeyer flasks or standard microplates.
</li>
<li>
Universal Magnetic Platforms: Versatile, metallic base platforms engineered for instant, tool-free swapping of magnetic clamps and tube racks.
</li>
<li>
Magnetic Flask Clamps: Single-size and combo magnetic clamps designed for quick attachment to hold 25ml up to 500ml Erlenmeyer flasks.
</li>
<li>
Magnetic Tube Racks: Specially designed magnetic racks to accommodate culture tubes, microplates, and large conical bottles in various orientations.
</li>
</ul>
&nbsp;
<h2>How to choose orbital shaker accessories</h2>
&nbsp;
Select Erlenmeyer flask clamps by flask volume
Flask clamps are designed for specific flask sizes, including 125 mL, 250 mL, 500 mL, 1 L, and larger culture flasks. Each clamp is engineered to fit the dimensions of a particular flask size, ensuring secure retention during shaking.
Confirm compatibility with your shaker platform
Accessory mounting systems vary between manufacturers and shaker models. Before ordering, verify that the clamp, holder, or rack is listed as compatible with the specific orbital shaker platform being used.
Choose a microplate holder suitable for your application
Microplate holders secure standard microplates during incubation and mixing procedures. Different holder designs support different operating speeds and plate formats, making compatibility and intended use important selection criteria.
Use a non-slip platform mat for flexible vessel placement
Non-slip mats provide a simple solution for holding bottles, flasks, trays, and other containers at low to moderate shaking speeds. They are useful when vessel configurations change frequently and dedicated clamps are not required.
Verify tube rack capacity and platform fit
Tube rack inserts are available for common laboratory tube formats, including microcentrifuge tubes and conical centrifuge tubes. Confirm that the rack dimensions fit within the shaker platform and that the rack accommodates the desired number of samples per run.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Orbital shaker accessories are designed to keep vessels securely positioned while exposed to continuous circular motion. Flask clamps, plate holders, and tube racks should be selected according to vessel dimensions, operating speed, and platform compatibility. Stainless steel spring-clip clamps remain one of the most widely used accessory formats for laboratory culture applications due to their durability and secure retention.
<a href="https://mbpinc.net/contact-us">Conatct helpful team at MBP</a> for a quick customised quote.

Dedicated Platform, 12 x 125ml Erlenmeyer flasks

The H1000-P-125 by Benchmark Scientific is a dedicated platform for Benchmark Orbi-Shaker and Incu-Shaker orbital shakers, holding 12 x 125 ml Erlenmeyer flasks in a fixed-position configuration for standardized multi-flask culture runs.

Dedicated Platform, 5 x 500ml Erlenmeyer flasks

The H1000-P-500 by Benchmark Scientific is a dedicated orbital shaker platform for 5 × 500 mL Erlenmeyer flasks, compatible with the Incu-Shaker Mini, Orbi-Shaker, and Orbi-Shaker CO2. Flask-specific seating prevents shifting during orbital shaking and supports parallel cell culture, microbial growth, and expression workflows at the 500 mL scale.

Dedicated Platform, 8 x 250ml Erlenmeyer flasks

H1000-P-250 by Benchmark Scientific is a dedicated orbital shaker platform holding 8 × 250 ml Erlenmeyer flasks, compatible with Orbi-Shaker and Incu-Shaker series instruments. Integrated fixed flask positions provide secure retention without additional clamp accessories — order at mbpinc.net/quickorder using catalog number H1000-P-250.

Dedicated Platform, holds 4 standard micro plates (max. 1)

The H1000-P-MP by Benchmark Scientific is a dedicated platform for 4 standard SBS-format microplates, compatible with the Incu-Shaker Mini, Orbi-Shaker, and Orbi-Shaker CO2 — one platform per shaker position (max. 1).

3D Rockers Accessories

<h2>What are 3D rocker accessories?</h2>
&nbsp;
3D rocker accessories are the interchangeable tube holders, platform mats, and container-retention clips that allow a 3D rocking platform to be used with different vessel types beyond flat trays resting directly on the platform surface. Tube holder accessories fix microcentrifuge, 15 mL, or 50 mL conical tubes in defined positions on the platform, enabling the 3D rocking motion to agitate tube contents without requiring a separate tube rotator. Non-slip platform mats grip trays, gel boxes, and flat containers by friction, preventing them from sliding during rocking. Container clips secure the edges of blot containers or larger trays at higher speeds.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Flat mats (small and large) for flask, plate, and container stable placement&nbsp;</li>
<li dir="ltr" role="presentation">Dimpled mats designed safely hold tubes during mixing</li>
<li dir="ltr" role="presentation">Stacking platforms with flat or dimpled mats to increase space for working area</li>
<li dir="ltr" role="presentation">Platform options with different clearances provide flexibility in multiple setups</li>
<li dir="ltr" role="presentation">Additional platform separators provide more vertical capacity</li>
<li dir="ltr" role="presentation">Packs for securing bigger and irregular lab vessels</li>
<li dir="ltr" role="presentation">Small and large platform sizes to match different models of rockers</li>
<li dir="ltr" role="presentation">Interchangeable accessories for personalized mixing configurations</li>
</ul>
&nbsp;
<h2>How to choose 3D rocker accessories</h2>
&nbsp;
Match tube holder accessories to your tube size and the rocker model
Tube holders for 3D rockers are designed for specific tube formats &mdash; microcentrifuge (1.5 mL and 2 mL), 15 mL conical, and 50 mL conical &mdash; and attach to the platform via a platform-specific mounting system. Confirm that the tube holder accessory is listed as compatible with your specific 3D rocker model, since mounting systems vary between manufacturers.
Use a non-slip mat for flat containers at low to moderate rocking speeds
A non-slip silicone or rubber platform mat holds flat trays and gel boxes by friction at rocking speeds up to approximately 20&ndash;25 rpm, suitable for most blot and gel incubation applications. At higher speeds or steeper tilt angles, the tray may slide despite the mat, and dedicated container clips provide more secure retention.
Choose container clips or tray holders for heavier or larger containers
For large gel staining dishes or containers with significant weight or liquid volume that might slide on the platform, dedicated container clips or tray holder frames that attach to the platform edges provide secure retention at any rocking speed. These are important when working with larger format blots or multiple staining trays simultaneously.
Consider a multi-format accessory kit for maximum versatility
A set covering a non-slip mat, microcentrifuge tube holder, and 50 mL conical tube holder allows the same 3D rocker to serve flat-surface and tube-mixing applications without separate orders per format, and is the standard starting accessory purchase for a new 3D rocker installation.
Verify material compatibility with your lab cleaning agents
Platform mats and tube holders are typically made from polypropylene, silicone, or polyurethane, and should be compatible with your lab disinfectants. Silicone mats resist common lab disinfectants; check materials for compatibility with bleach-based or solvent-based cleaning protocols used.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Tube holders for 3D rocking platforms must secure tubes against centrifugal and gravitational forces during the tilting cycle, and the holder's design determines the maximum safe rocking speed. As of 2026, universal tube holders fitting multiple formats from a single base mount have become available, reducing the number of separate accessories needed for labs mixing different tube sizes on the same 3D rocker.
<a href="https://mbpinc.net/contact-us">Contact the MBP team today </a>to request a quote and find the right accessories for your 3D rocker.

3D Rocker Accessories

Dimpled Mat, large 12" x 12"

The BR1000-DIMPLED by Benchmark Scientific is a large-format (12 x 12 in) dimpled rubber mat designed as a replacement or spare platform surface for compatible Benchmark rocker and shaker instruments. The autoclavable dimpled surface grips tubes and vessels to prevent slippage during rocking, blotting, or 3D mixing motions. Ideal for lab managers maintaining multiple rocker platforms or replacing worn mats on BenchBlotter, BenchRocker 3D, BioMixer 3D, and BlotBoy 3D units.

Dimpled Mat, small 10.5" x 7.5"

The B3D-DIMPLED by Benchmark Scientific is an autoclavable 10.5 x 7.5 in. dimpled rubber replacement mat for the Mini BlotBoy 3D Rocker (B3D1008) and MiniMixer 3D Nutating Shaker (B3D1020). Dimple pattern secures microcentrifuge and blood collection tubes up to 50 mL during nutating motion without clips or straps.