Brands

Pipettors Accessories

<h2 dir="ltr"> What Are Pipettor Accessories?</h2>
 Pipettor accessories are complementary tools and parts that support correct storage, calibration, maintenance, and identification of laboratory pipettors. Pipettors stored lying flat on a benchtop risk contaminating the nose cone and suffer tip ejector wear; vertical stand storage is the manufacturer-recommended practice for all brands. At a minimum, every lab needs a pipette stand to prevent bench contamination and a calibration tool to verify ISO 8655 accuracy without sending instruments out.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Pipette stands for secure pipettor storage
</li>
<li dir="ltr" aria-level="1">
Carousel pipette holders for easy multi-instrument access
</li>
<li dir="ltr" aria-level="1">
Pipettor calibration tools for accuracy checks
</li>
<li dir="ltr" aria-level="1">
Pipette tip racks and refill systems
</li>
<li dir="ltr" aria-level="1">
Pipette filter replacement accessories
</li>
<li dir="ltr" aria-level="1">
Pipettor cleaning and maintenance tools
</li>
<li dir="ltr" aria-level="1">
Pipette workstation organizers
</li>
</ul>
<h2 dir="ltr"> Key Pipettor Accessory Categories</h2>
 Pipette Stands and Carousel Racks Single-position vertical stands store one pipette upright, protecting the nose cone from surface contact. Six-position carousel stands rotate 360&deg; and hold 6 pipettors of mixed sizes &mdash; the standard for a molecular biology bench set covering P2, P10, P20, P200, P1000, and P5000. Universal-format carousels (Eppendorf, Gilson, Rainin, Biohit, Thermo) accommodate most standard pipette body diameters; manufacturer-specific stands provide a precision fit. Wall-mount holder systems save bench space in smaller workspaces. In-Lab Calibration Tools Gravimetric calibration of a pipettor requires only a calibrated analytical balance (0.0001 g resolution), distilled water, and a calibration tool specific to the pipettor model for adjusting the piston stop. Manufacturer calibration kits (e.g., Gilson Pipetman Calibration Kit, Eppendorf calibration tool) allow in-lab ISO 8655 verification without sending pipettors to an external service. ISO 17025-accredited external calibration services (Gilson, Eppendorf, Rainin) issue certified calibration reports for GLP and regulatory compliance. O-Ring and Seal Service Kits Worn O-rings and seals are the most common cause of pipettor inaccuracy and tip leakage after physical damage. Service kits specific to each pipettor model (Gilson PIPETMAN service kit, Eppendorf Research Plus service kit) include O-rings, seals, and small springs for routine preventive maintenance. Gilson recommends preventive maintenance every 1&ndash;2 years or whenever calibration verification fails. Colour-Coding Rings Colour-coded silicone rings clip onto pipette barrels for quick volume identification, user assignment, or pre/post-PCR segregation in shared labs. Eppendorf ColorTag rings are available in 12 colours and 6 sizes compatible with all Eppendorf pipette models; universal-format rings fit most major brands. Charger Stands for Electronic Pipettors Electronic pipettors (Eppendorf Research Pro, Rainin Pipet-Lite XLS+) require charger stands or base docks for overnight charging. Charger stands also serve as storage; the Eppendorf Charger Stand 2 holds and charges a single electronic model on the bench. 
<h2 dir="ltr"> Specifications Context</h2>
 Pipettor stands should be used per all major manufacturer guidelines &mdash; Eppendorf, Gilson, and Rainin all specify vertical storage as the correct position to prevent liquid ingress into the piston. ISO 8655 calibration requires distilled water at 20&deg;C, a balance with 0.0001 g resolution, and a minimum of 10 dispenses per volume setting. Eppendorf ColorTag rings are available in 6 sizes covering pipettes from 2 &micro;L to 5,000 &micro;L.&nbsp; Eppendorf, Gilson, and Rainin offer both in-lab calibration tools and ISO 17025-certified external calibration services.&nbsp; 
Is your workstation as organized as your research? Don&rsquo;t wait for a pipette to fall or a seal to fail. <a href="https://mbpinc.net/contact-us" style="color: #236fa1;">Connect with the MBP team</a> today to stock up on the essentials that keep your lab running like clockwork.

Pipettor Accessories

3361-COMBO-Group-Diamond Posi-Stop Brochure

Diamond PosiStop Pipettor Starter Packs

3361-COMBO by Globe Scientific bundles three Diamond PosiStop single-channel adjustable pipettors (2–20 µL, 20–200 µL, 100–1000 µL), racked sterile tips, a 6-place carousel stand, and 10/25/50 mL reagent reservoirs into one order. Available in standard and low-retention filter tip variants, each pipettor carries a factory ISO 17025 calibration certificate and a 3-year warranty. Order via mbpinc.net/quickorder using catalog number 3361-COMBO.

Manufacture

Diamond PosiStop Pipettor Starter Pack, Includes pipettors, tips, stand and reservoir

Diamond PosiStop Pipettor Starter Pack, Includes pipettors, filter tips, stand and reservoir

Single Channel Pipettors

<h2 dir="ltr">What Are Single-Channel Pipettors?</h2>
 A single-channel pipettor is the single most widely used liquid handling instrument in molecular biology, cell biology, and clinical research. It transfers precise volumes between 0.1 &micro;L and 5,000 &micro;L, one well or tube at a time, using an air-displacement piston mechanism. The piston creates a partial vacuum that aspirates liquid into a disposable tip; advancing the piston fully dispenses the liquid. A spring-loaded tip ejector releases the used tip without hand contact for contamination control. Manual models depend on finger force and offer simple, battery-free operation; electronic models add programmable aspiration/dispensing speeds, multi-dispense modes, and up to 5 custom pipetting programs.&nbsp; A set of four manual single-channel pipettors (P10, P20, P200, P1000) covers 95% of molecular biology liquid handling; add electronic models for high-throughput repetitive work.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Adjustable volume single-channel pipettors for flexible workflows
</li>
<li dir="ltr" aria-level="1">
Fixed volume pipettors for repeatable dispensing tasks
</li>
<li dir="ltr" aria-level="1">
Mechanical pipettors for standard lab use
</li>
<li dir="ltr" aria-level="1">
Ultra-low volume micropipettors for precise &micro;L handling
</li>
<li dir="ltr" aria-level="1">
Wide-range pipettors covering &micro;L to mL volumes
</li>
<li dir="ltr" aria-level="1">
Autoclavable pipettors for sterile environments
</li>
<li dir="ltr" aria-level="1">
Lightweight ergonomic pipettors for long sessions
</li>
</ul>
<h2 dir="ltr"> How to Choose a Single-Channel Pipettor</h2>
 Volume Range: Build a Complete Bench Set A standard four-pipettor bench set covers P10 (1&ndash;10 &micro;L), P20 (2&ndash;20 &micro;L), P200 (20&ndash;200 &micro;L), and P1000 (100&ndash;1,000 &micro;L). For sub-microliter work (sequencing, single-cell), add a P2 (0.2&ndash;2 &micro;L). For large-volume dispensing (media prep, column loading), add a P5000 (1,000&ndash;5,000 &micro;L). Avoid selecting a volume range that places your target dispense below 20% of the maximum &mdash; accuracy degrades at the low end of any range. Manual vs Electronic Manual single-channel pipettors (Eppendorf Research Plus, Gilson PIPETMAN Classic, Rainin Pipet-Lite XLS+) are the standard for routine lab work: field-calibratable, autoclavable, and requiring no power source. Electronic single-channel pipettors (Eppendorf Research Pro, Rainin Pipet-Lite XLS+ Electronic) add: programmable aspiration/dispense speed (5 speeds), multi-dispense (repeat pipetting) mode, mix mode, dilution mode, and backlight LCD volume display. Electronic models reduce hand fatigue in workflows exceeding 200&ndash;300 tip changes per day. Tip Compatibility Three tip systems cover the market: standard conical (universal fit &mdash; fits Eppendorf Research Plus, Gilson PIPETMAN, Rainin non-LTS, Thermo, Sartorius/BioHit); Rainin LTS cylindrical (requires LTS-specific tips &mdash; lower force insertion); Eppendorf epT.I.P.S. proprietary (tightest fit for Eppendorf instruments). Select the tip system that matches your pipettor purchase and existing tip inventory before committing to a brand. Autoclavability and Chemical Resistance Manual pipettors from Eppendorf, Gilson, and Rainin have fully autoclavable lower sections (121&deg;C, 15 psi, 15 min). Electronic pipettors have autoclavable nose cones only &mdash; the electronic module cannot be autoclaved. Calibration and Service All single-channel pipettors are factory-calibrated per ISO 8655. Field recalibration tools are available for Eppendorf, Gilson, and Rainin to perform in-lab gravimetric verification without external service. 
<h2 dir="ltr"> Specifications Context </h2>
 ISO 8655 Part 2 accuracy spec for a 200 &micro;L air-displacement pipettor: &plusmn;0.8 &micro;L systematic error, &le;0.3 &micro;L random error (Eppendorf Research Plus specification at 200 &micro;L). Most manual pipettors weigh 70&ndash;120 g; electronic models weigh 150&ndash;220 g. Operating temperature range: typically 15&ndash;40&deg;C. Eppendorf Research Plus, Gilson PIPETMAN Classic, and Rainin Pipet-Lite XLS+ LTS remain the three dominant single-channel pipettor platforms in North American research labs.&nbsp; 
&nbsp;
Ready to find your new favorite lab tool? Don&rsquo;t just settle for any grip&mdash;find the one that fits your hand and your science. <a href="https://mbpinc.net/contact-us" style="color: #236fa1;">Reach out to the MBP team</a> today for a customized quote.

3361-Group-Diamond Posi-Stop Brochure

Diamond PosiStop Single Channel Pipettors - Adjustable Volume

3361 by Diamond PosiStop (Globe Scientific) is a fully autoclavable, adjustable-volume single-channel micropipettor with magnetically assisted piston, PosiStop positive-stop mechanism, and LTS tip compatibility. Seven volume ranges from 0.1–2.5 µL to 100–1,000 µL. ISO 17025-traceable calibration. 3-year warranty.

Pipette, Diamond PosiStop, Fully Autoclavable, Adjustable volume, 0.1 - 2.5ul, Red

Pipette, Diamond PosiStop, Fully Autoclavable, Adjustable volume, 0.5 - 10ul, Red

Pipette, Diamond PosiStop, Fully Autoclavable, Adjustable volume, 2 - 20ul, Red

Pipette, Diamond PosiStop, Fully Autoclavable, Adjustable volume, 5 - 50ul, Green

Pipette, Diamond PosiStop, Fully Autoclavable, Adjustable volume, 10 - 100ul, Green

Pipette, Diamond PosiStop, Fully Autoclavable, Adjustable volume, 20 - 200ul, Green

Pipette, Diamond PosiStop, Fully Autoclavable, Adjustable volume, 100 - 1000ul, Blue

Vacuum Filtration

<h2 dir="ltr">What are Vacuum Bottle-Top Filter Systems?</h2>
 Vacuum bottle-top filter systems are single-use, sterile filtration assemblies consisting of a graduated polystyrene funnel with an integrated membrane filter bonded to a polystyrene receiver bottle, connected by a hose-port adaptor to a house vacuum line or benchtop vacuum pump. The applied negative pressure (&minus;50 to &minus;100 kPa) draws liquid through the membrane into the receiver bottle, which is sealed after filtration for immediate use or cold-room storage.&nbsp;
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
50mL Vacuum Filtration Units for small-scale sterile sampling
</li>
<li dir="ltr" aria-level="1">
150mL Vacuum Filtration Systems for rapid reagent preparation
</li>
<li dir="ltr" aria-level="1">
250mL Filtration Units for routine buffer sterilization
</li>
<li dir="ltr" aria-level="1">
500mL Vacuum Filtration Cups for mid-scale media processing
</li>
<li dir="ltr" aria-level="1">
1000mL Large Volume Filtration for industrial-scale batching
</li>
<li dir="ltr" aria-level="1">
Sterile Bottle-Top Filters for secure aseptic transfer
</li>
</ul>
<h2 dir="ltr"> How to Choose Vacuum Filtration Systems</h2>
 PES vs. PVDF Membrane for Vacuum Filtration PES membranes provide low protein binding (~1&ndash;2 &micro;g/cm&sup2;), high flow rates, and broad aqueous-solution compatibility &mdash; the standard for routine DMEM, RPMI, HBSS, PBS, and supplement-containing media sterilization. PVDF membranes have slightly lower protein binding than PES and greater chemical resistance to mild organic solvents, mild acids, and alkaline solutions. Use PVDF when filtering protein-rich solutions (FBS, antibody preparations, conditioned medium with high protein content) or when mild organic solvents are present in the filter solution. Volume Selection 250 mL systems (50 mm diameter membrane, 50 mL funnel) suit small media aliquots, supplement solutions, and transfection reagent preparations. 500 mL systems (90 mm diameter membrane, 150 mL funnel) are the routine lab workhorse for standard 500 mL media bottle preparation and FBS filtration. 1,000 mL systems (90 mm diameter membrane, 350 mL funnel) handle full-liter media preparations and large-volume buffer sterilization. All NEST systems include a pre-attached, graduated polystyrene receiver bottle in the corresponding volume. Pore Size: 0.10 &micro;m vs. 0.22 &micro;m vs. 0.45 &micro;m 0.22 &micro;m is the sterilizing grade per USP &lt;1229.2&gt; and ICH Q9: retains all bacteria and fungi; used for routine cell culture media, PBS, and buffer preparation. 0.45 &micro;m is the clarification grade: used as a pre-filtration step before 0.22 &micro;m to remove large particulates from turbid or high-biomass samples (FBS, conditioned media, cell culture supernatants, crude lysates), extending 0.22 &micro;m filter throughput by 3&ndash;5&times; on difficult samples. 0.10 &micro;m is the mycoplasma-removal grade: required when preparing media for Mycoplasma-sensitive primary cell culture or when processing serum or supplementary reagents that may harbor Mycoplasma species. Note that 0.10 &micro;m filtration is substantially slower than 0.22 &micro;m due to the tighter membrane pore structure. Practical Tips for Maximum Throughput Pre-wet the membrane by briefly passing 5&ndash;10 mL of sterile water through before the sample &mdash; this wets the hydrophilic PES or PVDF membrane and reduces initial resistance. For FBS and other viscous solutions, pre-filter through 0.45 &micro;m before the 0.22 &micro;m step. Maintain a vacuum at &minus;50 to &minus;80 kPa; excessive vacuum (&gt; &minus;100 kPa) can shear fragile membrane pores and increase non-specific protein adsorption. Do not autoclave the assembled bottle-top filter &mdash; PES and PS components are not rated for autoclave sterilization. 
<h2 dir="ltr"> Specifications Context</h2>
 NEST Scientific vacuum bottle-top filters are manufactured from polystyrene funnel and receiver bottle components with PES or PVDF membranes. PES membranes have documented low protein binding (~1&ndash;2 &micro;g/cm&sup2;) per NEST scientific USA FAQ. Membrane diameter: 250 mL volume &rarr; 50 mm; 500 mL and 1,000 mL &rarr; 90 mm. The hose connector design accommodates various standard vacuum hose diameters. NEST PES 0.22 &micro;m vacuum filters are described as comparable in performance to leading brands, including Corning Stericup, Thermo Fisher Scientific, and Sartorius, per NEST Scientific USA's product page. All NEST vacuum filters are sterile and non-pyrogenic per the lot certificate. NEST Scientific vacuum bottle-top filters are stocked by MBP in all core SKUs. 
&nbsp;
Because your research should move faster than a slow-dripping filter. <a href="https://mbpinc.net/contact-us" title="Contact the Molecular Biology Products Inc. team" style="color: #236fa1;">Contact the Molecular Biology Products Inc. team</a> for a quote before your deadlines catch up with you.

Product Literature

PES BT Filter Specifications

Diamond PureFlow Bottle Top Filter, PES Membrane, Sterile

Diamond PureFlow Bottle Top Filter PES (SKU VF-BT-PES-0150) — low-protein-binding PES membrane, 0.10/0.22/0.45 µm pore sizes, 150–1000 mL receiver volumes. USP Class VI polystyrene/ABS housing. Sterile. Vacuum-driven; hose barb fitting. For cell culture media sterilization and biological solution clarification.

Diamond PureFlow Bottle Top Filter, 150mL, PES Membrane,  0.22μm  Porosity, STERILE, Individually Wrapped, 24/Cs

Diamond PureFlow Bottle Top Filter, 250mL, PES Membrane,  0.22μm  Porosity, STERILE, Individually Wrapped, 24/Cs

Diamond PureFlow Bottle Top Filter, 500mL, PES Membrane,  0.22μm  Porosity, STERILE, Individually Wrapped, 24/Cs

Diamond PureFlow Bottle Top Filter, 1000mL, PES Membrane,  0.22μm  Porosity, STERILE, Individually Wrapped, 24/Cs

Diamond PureFlow Bottle Top Filter, 150mL, PES Membrane,  0.45μm  Porosity, STERILE, Individually Wrapped, 24/Cs

Diamond PureFlow Bottle Top Filter, 250mL, PES Membrane,  0.45μm  Porosity, STERILE, Individually Wrapped, 24/Cs

Diamond PureFlow Bottle Top Filter, 500mL, PES Membrane,  0.45μm  Porosity, STERILE, Individually Wrapped, 24/Cs

Diamond PureFlow Bottle Top Filter, 1000mL, PES Membrane,  0.45μm  Porosity, STERILE, Individually Wrapped, 24/Cs

Diamond PureFlow Solution Bottle, PS, STERILE

VF-SB-0150 by Globe Scientific is a sterile polyethersulfone (PES) vacuum filtration solution bottle constructed from virgin USP Class VI polystyrene, available in 150&nbsp;mL, 250&nbsp;mL, 500&nbsp;mL, and 1000&nbsp;mL formats with 0.10&micro;m, 0.22&micro;m, or 0.45&micro;m pore sizes. Low-protein-binding PES membrane and GL45-compatible threading make it ideal for sterile filtration of cell culture media, buffers, and biological samples.

Diamond PureFlow Solution Bottle, 150mL, PS, STERILE, Individually Wrapped, 24/Cs

Diamond PureFlow Solution Bottle, 250mL, PS, STERILE, Individually Wrapped, 24/Cs

Diamond PureFlow Solution Bottle, 500mL, PS, STERILE, Individually Wrapped, 24/Cs

Diamond PureFlow Solution Bottle, 1000mL, PS, STERILE, Individually Wrapped, 24/Cs

Syringe Filters

<h2 dir="ltr">What are Syringe Filters?</h2>
 Syringe filters are self-contained, disposable filtration units comprising a polypropylene (PP) housing enclosing a flat-sheet membrane, with a female Luer lock inlet and a male Luer lock outlet. They are attached to a standard syringe, the sample is drawn up, and pushed through the membrane by manual plunger pressure. Standard disc diameters are 4 mm, 13 mm, 25 mm, and 33 mm; membrane pore sizes are 0.22 &micro;m (sterilizing grade) and 0.45 &micro;m (clarification grade), with 0.10 &micro;m available for mycoplasma removal. Effective filtration areas: 13 mm filter &asymp; 0.92 cm&sup2;; 25 mm filter &asymp; 2.98 cm&sup2;. Globe Scientific syringe filters, a confirmed MBP brand, are available in PP housing with PES, PVDF, CA (cellulose acetate), MCE, and nylon membranes in 13 mm and 30 mm diameters, sterile (individually wrapped) and non-sterile (bulk), 0.22 &micro;m and 0.45 &micro;m. Choose syringe filters for volumes of 1&ndash;150 mL; choose vacuum bottle-top filters for volumes above 150 mL.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
PES Syringe Filters for high-flow aqueous filtration
</li>
<li dir="ltr" aria-level="1">
PVDF Syringe Filters for low protein binding
</li>
<li dir="ltr" aria-level="1">
Nylon Syringe Filters for organic solvent compatibility
</li>
<li dir="ltr" aria-level="1">
0.22&mu;m Syringe Filters for absolute sterilization
</li>
<li dir="ltr" aria-level="1">
0.45&mu;m Syringe Filters for clarification and pre-filtration
</li>
<li dir="ltr" aria-level="1">
PTFE Syringe Filters for aggressive chemical resistance
</li>
<li dir="ltr" aria-level="1">
Hydrophilic Syringe Filters for versatile liquid handling
</li>
<li dir="ltr" aria-level="1">
Sterile Individually Blistered Filters for aseptic security
</li>
</ul>
<h2 dir="ltr"> How to Choose Syringe Filters</h2>
 Diameter Selection by Sample Volume 13 mm syringe filters (effective area 0.92 cm&sup2;) handle up to 10&ndash;15 mL per filter before flow resistance becomes impractical. Use with 1&ndash;10 mL syringes. 25 mm syringe filters (2.98 cm&sup2;) handle 10&ndash;100 mL per filter. Use with 10&ndash;60 mL syringes. 33 mm syringe filters (approximately 5&ndash;6 cm&sup2;) handle up to 150 mL and are the largest practical syringe filter format. For volumes above 150 mL, switch to a vacuum bottle-top filter system. Matching filter diameter to sample volume prevents premature membrane clogging and excessive plunger force. Membrane Chemistry for Syringe Filters PES (Polyethersulfone): Low protein binding, high flow rate, aqueous compatibility. Standard choice for biological sample sterilization, cell culture supplement filtration (antibiotics, glutamine, growth factors), and conditioned medium aliquots. Not suitable for strong organic solvents or concentrated acids. PVDF (Polyvinylidene fluoride, hydrophilic): Low protein binding &mdash; among the lowest of all syringe filter membranes, with protein recovery rates &gt;90&ndash;99.9% documented for antibody and enzyme solutions. Compatible with mild organic solvents, weak acids, and most aqueous solutions. The first choice when filtering precious protein solutions (antibodies, enzymes, viral preparations) is where maximum protein recovery is critical. Not suitable for pure DMSO (use PTFE). Nylon (Polyamide): Low extractables, broad chemical compatibility including mixed aqueous-organic solvents, methanol, acetonitrile, and DMSO-water mixtures. Standard for HPLC mobile phase filtration and dissolution testing. Higher protein binding than PES or PVDF &mdash; avoid for biological samples where protein loss is a concern. MCE (Mixed Cellulose Ester): Low cost, aqueous applications only; moderate protein binding. Suitable for general buffer preparation, water sterilization, and non-critical sample preparation. Not compatible with organic solvents or strong acids. CA (Cellulose Acetate): Low protein binding, similar to PES. Suited for biological sample filtration and sterility testing applications. Contains surfactant treatment for wettability &mdash; check for extractable compatibility in downstream assays. PTFE (Polytetrafluoroethylene, hydrophilic): Maximum chemical resistance &mdash; compatible with pure DMSO, concentrated acids and bases, and aggressive organic solvents. The only membrane choice for 100% organic solvent filtration. For aqueous solutions, use hydrophilic PTFE (pre-wetted with methanol or IPA before aqueous filtration unless the hydrophilic version is selected). Sterile vs. Non-Sterile Syringe Filters Sterile syringe filters (individually gamma-irradiated or E-beam sterilized, individually packaged) are required for cell culture media sterilization, supplement preparation, and sample preparation for biological culture. Non-sterile bulk-packed filters (Globe Scientific non-sterile formats) are appropriate for HPLC mobile phase preparation, analytical sample clarification, and non-biological applications where sterility of the filtrate is not required. 
<h2 dir="ltr">Specifications Context</h2>
 Globe Scientific syringe filters are manufactured in a PP housing with a luer-lock inlet and outlet conforming to ISO 594 / ISO 80369 for Luer fittings. PES and PVDF sterile filters are individually gamma irradiated; each is separately wrapped and printed with an expiry date per Globe Scientific lot protocol. Effective filtration areas: 13 mm filter &asymp; 0.92 cm&sup2;; 30 mm filter &asymp; 4.91 cm&sup2; (Globe Scientific welded format). Operating temperature: up to 60 &deg;C. Do not exceed the maximum operating pressure of 6 bar (87 psi). Globe Scientific is ISO 9001:2015 certified. Globe Scientific syringe filters in PES, PVDF, CA, MCE, and nylon membranes at 13 mm and 30 mm diameters are stocked by MBP. 
Request a quote today for premium syringe filters from <a href="https://mbpinc.net/contact-us">the MBP team</a> to&nbsp;find the right filtration solution for your laboratory applications.

SF-CA-2213-S-Group-Syringe Filters Brochure

Sterile CA Syringe Filters

Diamond PureFlow Sterile CA Membrane Syringe Filters

SF-CA-2213-S by Diamond (MBP) are sterile cellulose acetate (CA) membrane syringe filters, gamma irradiated, with a polypropylene pre-filter. CA's hydrophilic, low-protein-binding character makes these ideal for sterilization and clarification of protein-containing biological fluids and aqueous buffers. Available in 0.22µm and 0.45µm pore sizes, 13mm and 30mm diameters. Clear housing markings prevent misidentification in sterile workflows.

Syringe Filter, CA Membrane, 0.22μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, CA Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, CA Membrane, 0.45μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, CA Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

SF-MCE-2213-S-Group-Syringe Filters Brochure

Sterile MCE Syringe Filters

Diamond PureFlow Sterile MCE Syringe Filters

SF-MCE-2213-S by Diamond (MBP) are sterile mixed cellulose ester (MCE) membrane syringe filters, gamma irradiated, with a polypropylene pre-filter for high flow rates and low sample loss. Available in 0.22µm and 0.45µm pore sizes and 13mm and 25mm diameters for sterilization and clarification of biological fluids, tissue culture media, and aqueous solutions. Clearly marked housing prevents misidentification in aseptic workflows.

Syringe Filter, MCE Membrane, 0.22μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, MCE Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, MCE Membrane, 0.45μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, MCE Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

SF-NYLN-2213-S-Group-Syringe Filters Brochure

Sterile Nylon Syringe Filters

Diamond PureFlow Sterile Nylon Membrane Syringe Filters

SF-NYLN-2213-S by Globe Scientific is a sterile 0.22 µm nylon membrane syringe filter, 13 mm diameter, PP housing with integral pre-filter, gamma-sterilized to SAL 10⁻⁶, individually blister-packed, 50/box. Rated to 87 psi, pH 2–13, max 100°C. Available from MBP with fast shipping across the USA and Canada.

Syringe Filter, Nylon Membrane, 0.22μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, Nylon Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, Nylon Membrane, 0.45μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, Nylon Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

SF-PES-1013-S-Group-Syringe Filters Brochure

Sterile PES Syringe Filters

Diamond PureFlow Sterile PES Syringe Filters

SF-PES-1013-S by Diamond&#174; is a sterile 13 mm PES syringe filter with a 0.10 &#956;m pore size, polypropylene housing, PP microfiber pre-filter, and female Luer lock inlet / male Luer slip outlet. Gamma-irradiated to SAL 10&#8315;&#8310;; rated to 87 psi and pH 1&#8211;14. RNase-free and DNase-free; ISO 9001-certified manufacturing. Individually wrapped in peelable blisters; 50 per box. Order at mbpinc.net or email customerservice@mbpinc.net.

Syringe Filter, PES Membrane, 0.10μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, PES Membrane, 0.10μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, PES Membrane, 0.22μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, PES Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, PES Membrane, 0.45μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, PES Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

SF-PTFE-2213-S-Group-Syringe Filters Brochure

Sterile PTFE Syringe Filters

Diamond PureFlow Sterile PTFE Syringe Filters

SF-PTFE-2213-S by Globe Scientific is a sterile hydrophilic PTFE syringe filter available in 0.22&micro;m and 0.45&micro;m pore sizes and 13&nbsp;mm and 30&nbsp;mm diameter options, in a polypropylene housing, integrated PP prefilter, and gamma irradiation sterilization. The chemically resistant PTFE membrane handles organic solvents, aggressive reagents, and biological fluids incompatible with cellulose acetate or PES membranes, making it suitable for HPLC mobile phases, aqueous buffers, analytical sample prep, and biological fluid filtration.

Syringe Filter, PTFE Hydrophilic Membrane, 0.22μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, PTFE Hydrophilic Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, PTFE Hydrophilic Membrane, 0.45μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, PTFE Hydrophilic Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

SF-PVDF-S-Group-Syringe Filters Brochure

Sterile PVDF Syringe Filters

Diamond PureFlow Sterile PVDF Syringe Filters

Diamond PureFlow Sterile PVDF Syringe Filters (SKU SF-PVDF-S) — gamma irradiated SAL 10⁻⁶, 0.22 µm and 0.45 µm pore sizes, 13 mm and 30 mm diameters, PP housing and pre-filter, Female Luer Lock/Male Luer Slip. Broad chemical compatibility: aqueous, alcohols, DMSO, dilute acids/bases, organic solvents.

Syringe Filter, PVDF Hydrophilic Membrane, 0.22μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, PVDF Hydrophilic Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, PVDF Hydrophilic Membrane, 0.10μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, PVDF Hydrophilic Membrane, 0.45μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, PVDF Hydrophilic Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

SF-SFCA-2213-S-Group-Syringe Filters Brochure

Sterile SFCA Syringe Filters

Diamond PureFlow Sterile SFCA Syringe Filters

Diamond PureFlow Sterile SFCA Syringe Filters (SF-SFCA-2213-S) — low-protein-binding Surfactant-Free Cellulose Acetate membrane. Available in 0.22 μm and 0.45 μm pore sizes; 13 mm and 30 mm diameters. Gamma sterilized, SAL 10⁻⁶. PP pre-filter. Female Luer Lock / Male Luer Slip. Individually blister-packaged.

Syringe Filter, SFCA Membrane, 0.22μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, SFCA Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, SFCA Membrane, 0.45μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

Syringe Filter, SFCA Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped, 1000/Cs

PES Filter Specifications

Diamond PureFlow Vacuum Filter System, PES Membrane, Sterile

VF-FS-PES-0150 by Globe Scientific is a Diamond PureFlow™ sterile vacuum filter system with low-protein-binding PES membrane, available in 150 mL, 250 mL, 500 mL, and 1,000 mL volumes with 0.10 µm, 0.22 µm, or 0.45 µm pore sizes. Each system includes a filter unit, graduated collection bottle, and sterile cap in USP Class VI materials.

Diamond PureFlow Vacuum Filter System, 150mL, PES Membrane,  0.10μm  Porosity, STERILE, Individually Wrapped, 100/Cs

Diamond PureFlow Vacuum Filter System, 250mL, PES Membrane,  0.10μm  Porosity, STERILE, Individually Wrapped, 12/Cs

Diamond PureFlow Vacuum Filter System, 500mL, PES Membrane,  0.10μm  Porosity, STERILE, Individually Wrapped, 12/Cs

Diamond PureFlow Vacuum Filter System, 1000mL, PES Membrane,  0.10μm  Porosity, STERILE, Individually Wrapped, 12/Cs

Diamond PureFlow Vacuum Filter System, 150mL, PES Membrane,  0.22μm  Porosity, STERILE, Individually Wrapped, 12/Cs

Diamond PureFlow Vacuum Filter System, 250mL, PES Membrane,  0.22μm  Porosity, STERILE, Individually Wrapped, 12/Cs

Diamond PureFlow Vacuum Filter System, 500mL, PES Membrane,  0.22μm  Porosity, STERILE, Individually Wrapped, 12/Cs

Diamond PureFlow Vacuum Filter System, 1000mL, PES Membrane,  0.22μm  Porosity, STERILE, Individually Wrapped, 12/Cs

Diamond PureFlow Vacuum Filter System, 150mL, PES Membrane,  0.45μm  Porosity, STERILE, Individually Wrapped, 12/Cs

Diamond PureFlow Vacuum Filter System, 250mL, PES Membrane,  0.45μm  Porosity, STERILE, Individually Wrapped, 12/Cs

Diamond PureFlow Vacuum Filter System, 500mL, PES Membrane,  0.45μm  Porosity, STERILE, Individually Wrapped, 12/Cs

Diamond PureFlow Vacuum Filter System, 1000mL, PES Membrane,  0.45μm  Porosity, STERILE, Individually Wrapped, 12/Cs

United States

Texas

mbpinc