Novas Bio

PCR Strip Tubes & Caps

<h2 data-path-to-node="1"> What Are PCR Tube Racks?</h2>
 PCR tube racks are polypropylene holders that maintain 0.2 mL PCR tubes and strip tubes in a stable 8&times;12 (96-position) upright array during reaction setup, pre-PCR storage, and post-amplification handling. They stabilise tubes during multichannel pipetting, prevent tip deflection when dispensing with an 8-channel pipette, and serve as organisational tools for pre- and post-PCR sample management. Most racks accept both individual 0.2 mL tubes and 8-strip or 12-strip tubes in the same 96-well footprint.&nbsp;
&nbsp;
<h2 data-path-to-node="2">What you will find:</h2>
&nbsp;
<ul data-path-to-node="3">
<li>
96-well PCR tube racks for standard tube organization
</li>
<li>
Color-coded PCR tube racks for sample tracking
</li>
<li>
Stackable PCR tube racks for space-saving storage
</li>
<li>
Autoclavable polypropylene tube racks for sterile workflows
</li>
<li>
Racks for 0.2 mL PCR tubes and strip tubes
</li>
<li>
Freezer-safe PCR tube storage racks for long-term use
</li>
<li>
Ice-compatible PCR tube racks for cold-chain handling
</li>
<li>
Multi-format tube racks for mixed sample workflows
</li>
</ul>
<h2 data-path-to-node="1"> How to Choose PCR Tube Racks</h2>
 Well Diameter and Tube Compatibility Standard 96-well PCR racks have a 5.2 mm well diameter, compatible with most 0.2 mL thin-wall PCR tubes from Globe Scientific, Nest Scientific, Axygen/Corning, Eppendorf, and equivalent brands. Confirm the collar diameter of your specific tube brand before ordering if using non-standard tube geometry. Lid: Hinged Flat vs Translucent Cover vs No Lid Hinged flat lids lie flush when open for unobstructed pipette access; the lid can be closed to protect tubes during incubation or transport. Translucent polycarbonate lids allow visual sample inspection without lid removal &mdash; useful for barcode readers that scan through the cover. Lidless racks are the simplest format for bench use, where brief sample exposure is acceptable. Colour Coding Racks are available in single colours (blue, green, pink, yellow, orange) and assorted multi-colour packs. Colour-coded racks help segregate pre-PCR and post-PCR samples, reducing cross-contamination risk in labs without fully separated pre/post-PCR workspaces. Autoclavability Polypropylene PCR tube racks are autoclavable at 121&deg;C (250&deg;F) for sterilisation between use cycles. Polycarbonate lids withstand repeated autoclave cycles at standard sterilisation conditions. SBS Footprint for Automation Select PCR strip racks with an SBS/SLAS-compliant footprint (127.76 &times; 85.47 mm) to enable use with robotic liquid handlers and automated workstations when processing strip tubes on automation platforms. 
<h2 data-path-to-node="1"> Specifications Context</h2>
 Standard 96-well PCR tube racks measure approximately 130 &times; 98 &times; 33 mm (L &times; W &times; H) with 5.2 mm well diameter and 9 mm well spacing. Polypropylene construction is chemical-resistant and autoclavable at 121&deg;C. Alphanumeric embossed grid (A&ndash;H rows, 1&ndash;12 columns) matches the labelling of PCR plates and plates for straightforward sample mapping. SP Bel-Art 96-well PCR racks and equivalent formats from Heathrow Scientific and Globe Scientific are widely distributed in North American research labs.&nbsp; 
&nbsp;
<a href="https://mbpinc.net/contact-us">Contact the MBP team now</a> to keep your samples in order so your workflow stays smooth from prep to analysis.

PCR Tube Racks

<h2 dir="ltr"> What Are 8-Strip PCR Tubes?</h2>
 8-strip PCR tubes are a connected row of eight individual thin-wall polypropylene tubes supplied as a single unit, designed for simultaneous processing of eight reactions per strip. The strip format accommodates multichannel pipettes at standard 9 mm well spacing, reducing setup time compared to handling individual tubes one at a time. Available in 0.2 mL for standard thermal cycler blocks and 0.1 mL for fast-block or low-profile instruments. Caps are available attached (dome or flat) or as separate cap strips for labs that prefer independent tube and cap management. 8-strip tubes are the most efficient manual format for 8- or 16-sample PCR batches &mdash; choose 0.2 mL for standard blocks, 0.1 mL for fast-block cyclers.
&nbsp;
<h2>What you will find: <a href="https://mbpinc.net/8-strip-pcr-tubes" title="8-strip PCR Tubes"></a></h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
0.2 mL 8-strip PCR tubes for standard thermal cyclers
</li>
<li dir="ltr" aria-level="1">
Clear 8-strip tubes for general PCR applications
</li>
<li dir="ltr" aria-level="1">
White 8-strip PCR tubes for improved qPCR signal detection
</li>
<li dir="ltr" aria-level="1">
Optically clear strip caps for real-time PCR assays
</li>
<li dir="ltr" aria-level="1">
Flat cap 8-strip tubes for tight sealing performance
</li>
<li dir="ltr" aria-level="1">
Attached cap strip tubes for faster workflow setup
</li>
<li dir="ltr" aria-level="1">
DNase- and RNase-free PCR strip tubes for clean reactions
</li>
<li dir="ltr" aria-level="1">
Thin-wall 8-strip tubes for fast and even heat transfer
</li>
<li dir="ltr" aria-level="1">
Compatible strip formats for most PCR and qPCR instruments
</li>
</ul>
<h2 dir="ltr"> How to Choose 8-Strip PCR Tubes</h2>
 Volume: 0.2 mL vs 0.1 mL Standard 0.2 mL strips fit conventional tall-block cyclers, including Bio-Rad T100, Eppendorf Mastercycler, and Applied Biosystems Veriti. Low-profile 0.1 mL strips are required for fast-block instruments such as the Applied Biosystems StepOnePlus, Bio-Rad CFX96 Fast, and Roche LightCycler 480, where the shallower well reduces thermal equilibration time and supports faster cycling protocols. Cap Style: Dome vs Flat, Optical vs Separate Cap Strip Attached dome caps are the standard choice for endpoint PCR, where no fluorescence is read through the cap lid. Flat optically clear attached caps &mdash; or separately purchased optical cap strips &mdash; are required for real-time qPCR when detection occurs through the top of the tube; dome caps attenuate fluorescence and compromise Ct consistency. Separate cap strips offer flexibility to mix dome and flat caps on the same strip. Attached vs Separate Caps Attached caps prevent cap mix-ups and reduce handling steps in high-throughput setups. Separate cap strips (tube strip + cap strip sold together in the same bag) allow independent tube loading and cap seating &mdash; preferred when using automated liquid handlers or when labelling the cap exterior is important. Colour Options Clear strips are standard; assorted colour packs (clear, red, yellow, blue, green) allow colour-coded sample tracking. White polypropylene strips increase qPCR fluorescence signal in bottom-read optical configurations by reflecting emission back through the detector. Strip Rigidity Split-apart strips (perforated between tubes) allow individual tubes to be broken off from the strip &mdash; useful when fewer than 8 reactions are needed and waste reduction matters. 
<h2 dir="ltr"> Specifications Context</h2>
 8-strip tube walls are typically 0.25&ndash;0.35 mm thick virgin polypropylene free of additives, antistatic agents, and dyes. Certified DNase-free, RNase-free, human DNA-free, and PCR inhibitor-free per independent lot testing. Standard packs contain 120 strips (960 reactions) for 0.2 mL format; 0.1 mL packs are often 120 strips as well. As of 2026, Axygen (Corning) PCR-0208-C and equivalent Globe Scientific formats are widely distributed through North American channels.&nbsp;
&nbsp;
<a href="https://mbpinc.net/contact-us">Contact the MBP team</a> now if your workflow depends on speed and accuracy; this format keeps everything simple without losing control over your reactions.

8 Strip PCR Tubes

DataSheet

0.1 ml Low profile 8-strip Tubes and 8-strip Caps

PCR-0108LP by Novas Bio — 0.1 mL low-profile 8-strip PCR tubes with optically clear flat caps, thin-wall medical-grade PP, DNase/RNase/Human DNA-free, non-pyrogenic, 120 strips/pack. Compatible with Applied Biosystems, Bio-Rad, and Roche qPCR systems.

Packaging

Cap Type

Volume

Tube Color

Manufacturer

0.1ml Thin Wall Clear 8-Strip Tubes Low Profile, Clear and 8-Strip Optically Clear Caps 120/PK 10PK/CS

0.1ml Thin Wall Clear 8-Strip Tubes Low Profile, White and 8-Strip Optically Clear Caps 120/PK 10PK/CS

<h2 dir="ltr">What are Corbett-style PCR Tubes?</h2>
 Corbett-style PCR tubes are 0.1 mL thin-wall polypropylene tube strips in a 4-tube format specifically designed for the circular rotor of QIAGEN/Corbett Rotor-Gene instruments. Unlike standard 8-strip tubes designed for rectangular 96-well blocks, Corbett-style 4-strip tubes seat into the 72-well circular rotor of Rotor-Gene Q, 6000, and 3000 models, where centrifugal force distributes the reaction evenly across the tube during thermal cycling. They are the instrument-specific consumables for Rotor-Gene qPCR and cannot be substituted with standard strip tubes. Tube and cap strips are packaged separately in the same bag for independent handling and labelling.&nbsp; Corbett-style 4-strips are the only strip format that seats correctly in the Rotor-Gene 72-well rotor &mdash; do not substitute 8-strip tubes. 
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
0.1 mL Corbett style 4-strip PCR tubes for Rotor-Gene systems
</li>
<li dir="ltr" aria-level="1">
Matching 4-strip caps for secure sealing
</li>
<li dir="ltr" aria-level="1">
Optical clear strip tubes for real-time PCR detection
</li>
<li dir="ltr" aria-level="1">
Thin-wall polypropylene tubes for fast heat transfer
</li>
<li dir="ltr" aria-level="1">
DNase- and RNase-free PCR strip tubes for clean reactions
</li>
<li dir="ltr" aria-level="1">
Low-profile strip formats for efficient cycling performance
</li>
<li dir="ltr" aria-level="1">
qPCR-compatible strip tubes for fluorescence-based assays
</li>
<li dir="ltr" aria-level="1">
Pre-attached cap strip options for faster workflow setup
</li>
</ul>
<h2 dir="ltr"> How to Choose Corbett Style PCR Tubes</h2>
 Instrument Generation Corbett-style tubes are compatible across QIAGEN Rotor-Gene Q (current), Corbett Rotor-Gene 6000, Rotor-Gene 3000, and earlier models that all use the 72-well circular rotor. Confirm your rotor model (72-well vs 36-well) before ordering; the 36-well rotor uses 0.2 mL tubes, not 0.1 mL 4-strips. Cap Transparency Optically clear caps are standard and required for qPCR fluorescence detection (SYBR Green, FAM, ROX, Cy5, and other dye channels). Frosted-extension caps with clear tips combine a writeable label area with optical clarity at the tube bottom &mdash; useful for batch identification. Tube and Cap Packaging Separately Tube strips and cap strips are packaged in separate bags within the same unit. This allows caps to be removed without disturbing the tubes &mdash; particularly important when using the QIAgility liquid handler for automated setup on the Rotor-Gene platform. Purity and Material Specify tubes manufactured from virgin medical-grade polypropylene, certified DNase-free, RNase-free, human DNA-free, endotoxin-free, and PCR inhibitor-free. Roentgen (X-ray) transparent designation is sometimes listed &mdash; relevant for labs that scan tubes for secondary QC. 
<h2 dir="ltr"> Specifications Context</h2>
 Corbett-style 4-strip tubes have a 0.1 mL (100 &micro;L) total volume with a working volume of 10&ndash;50 &micro;L as specified by QIAGEN for Rotor-Gene Q protocols. The polypropylene body is optically transparent, provides no background fluorescence, and is certified free of DNase, RNase, DNA, endotoxin, and PCR inhibitors per independent lot testing. Axygen (Corning) PCR-0104-C, SSI Bio Corbett-type strips, and equivalent third-party formats are widely distributed alternatives to QIAGEN OEM strips and offer equivalent performance at lower cost.&nbsp; 
&nbsp;
Check compatibility and availability with <a href="https://mbpinc.net/contact-us">the MBP team</a> to ensure the right fit for your Rotor-Gene workflow.

Corbett Style PCR Tubes

0.1ml Thin Wall PCR 4-Strip Tubes and Caps, Rotor-Gene Q compatible, Clear 250/PK 10PK/CS

PCR-0104 by Novas Bio — 0.1 mL 4-strip PCR tubes and caps, medical-grade PP, optically clear, Rotor-Gene Q 72-well rotor compatible, pyrogen/RNase/DNase/BSE-TSE-free, 250 strips/pack.

0.2 ml 8-strip PCR Tubes and 8-strip Caps

PCR-0208 by Novas Bio — 0.2 mL 8-strip PCR tubes with separate 8-strip caps, polypropylene, clear, thin-walled for efficient heat transfer, compatible with standard 96-well thermal cycler blocks. 120 strips per pack.

Color

0.2ml Thin Wall Clear 8-Strip PCR Tubes 125/PK 10PK/CS

0.2ml Thin Wall Clear 8-Strip Tubes and 8-Strip Caps, flat caps 120/PK 10PK/CS

0.2ml Thin Wall Clear 8-Strip Tubes and 8-Strip Caps, optically clear flat caps, for qPCR 120/PK 10PK/CS

0.2ml Thin Wall Clear 8-Strip PCR Tubes with attached Frosted Flat Caps 120/PK 10PK/CS

0.2ml Thin Wall Clear 8-Strip PCR Tubes with attached Optically Clear Caps, for qPCR 120/PK 10PK/CS

0.2ml Thin Wall Clear 8-Strip PCR Tubes with attached Optically Clear Caps, for qPCR, recessed window 120/PK 10PK/CS

Centrifuge Tubes

<h2>What Are Centrifuge Tubes?</h2>
 Centrifuge tubes are cylindrical laboratory containers with caps that are used to separate, pellet, and store biological or chemical samples through centrifugal force. They are commonly made from polypropylene (PP) or polystyrene (PS) and are available in sizes ranging from small 0.5 mL microtubes to larger 50 mL conical tubes. These tubes are widely used for cell pelleting, protein precipitation, DNA and RNA extraction, tissue homogenate clarification, and long-term sample storage. Depending on the material, they can withstand temperatures from &minus;80 &deg;C to +121 &deg;C.
In short, the best centrifuge tube depends on your centrifuge rotor, required g-force, sample volume, and sterility needs. 
<h2>What You Will Find: </h2>
<ul>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes" title="All Centrifuge Tubes">All Centrifuge Tubes</a>: Comprehensive selection of 15 mL and 50 mL conical tubes with clear graduations for daily lab workflows.</li>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/oak-ridge-style-centrifuge-tubes" title="Oak Ridge Style Centrifuge Tubes">Oak Ridge Style Centrifuge Tubes</a>: High-speed, chemical-resistant tubes designed to withstand extreme RCF without deformation.</li>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/centrifuge-bottles" title="Centrifuge Bottles">Centrifuge Bottles</a>: Heavy-duty, larger-capacity vessels engineered for bulk sample processing and high-velocity runs.</li>
<li><a href="https://mbpinc.net/consumables/centrifuge-tubes/large-volume-centrifuge-tubes" title="Large Volume Centrifuge Tubes">Large Volume Centrifuge Tubes</a>: Industrial-strength 250 mL and 500 mL tubes optimized for pilot-scale harvesting and bioprocessing.</li>
</ul>
&nbsp;
<h2>How to Choose Centrifuge Tubes</h2>
 Volume and Rotor Compatibility
Select a tube size that matches both your sample volume and centrifuge rotor. Microtubes ranging from 0.5&ndash;2 mL are commonly used in microcentrifuges and can typically handle speeds up to 20,000 &times; g. Midi tubes in the 5&ndash;10 mL range are suitable for intermediate sample volumes, while 15 mL and 50 mL conical tubes are commonly used in clinical, research, and preparative centrifuges.
Material: Polypropylene vs. Polystyrene
Polypropylene (PP) tubes offer excellent chemical resistance and can tolerate temperatures from &minus;80 &deg;C to +121 &deg;C. They are suitable for autoclaving and exposure to many laboratory solvents. Polystyrene (PS) tubes provide superior optical clarity, making it easier to visually inspect samples and liquid levels, but they have lower resistance to solvents and extreme temperatures.
Sterility and Contamination Control
Sterile centrifuge tubes are typically gamma- or E-beam-irradiated and certified free of RNase, DNase, and pyrogens. These tubes are recommended for RNA extraction, cell culture, and clinical applications where contamination must be minimized. Non-sterile tubes may still be RNase- and DNase-free and are often suitable for routine DNA work and general sample storage.
Cap Design
Attached screw caps help prevent cap mix-ups and sample contamination, especially in high-throughput laboratories. Separate caps can be quicker to open and may be preferred in workflows that require frequent access to samples. If tubes will be used with automated systems, cap dimensions should be verified for compatibility with liquid handling equipment.
Packaging Options
Racked tubes provide convenient organization and allow direct pipetting while the tubes remain in the rack. Bulk-bagged tubes offer a more economical option for laboratories that process large volumes of samples and already have tube storage systems in place.
<h2> Comparing Common Centrifuge Tube Types</h2>
 Microtubes (0.5&ndash;2 mL) are ideal for PCR preparation, microcentrifuge applications, and storage of small sample volumes. They can generally withstand centrifugal forces up to 20,000 &times; g.
Midi tubes (5&ndash;10 mL) are designed for intermediate sample volumes such as culture supernatants and can typically tolerate forces up to 16,000 &times; g.
Sterile 15 mL conical tubes are frequently used for cell pelleting, RNA extraction, and clinical sample processing, with typical ratings between 12,000 and 15,000 &times; g.
Sterile 50 mL conical tubes are commonly selected for larger-volume applications including tissue culture work, density gradient preparation, and large-scale sample processing.
Polystyrene conical tubes in 15 mL and 50 mL formats are often chosen when visual sample inspection is important and solvent exposure is minimal.
<h2> Specifications and Features</h2>
 Polypropylene centrifuge tubes from Globe Scientific and Nest Scientific are manufactured from USP Class VI virgin resin and do not contain plasticizers or processing additives. Sterile products are typically irradiated to achieve a sterility assurance level (SAL) of 10⁻⁶. Most 15 mL tubes feature graduation marks at 1 mL intervals, while 50 mL tubes are usually graduated every 5 mL. MBP offers both bagged and racked centrifuge tube formats, including 15 mL and 50 mL conical tubes as well as smaller microtube and midi tube options.
MBP supports procurement departments by accepting purchase orders and offering institutional pricing for qualified high-volume customers. <a href="https://mbpinc.net/contact-us">Contact the MBP team today</a> for a customized quote.

<h2 data-section-id="155qizo" data-start="0" data-end="33">What Are All Centrifuge Tubes?</h2>
&nbsp;
The All Centrifuge Tubes collection includes the complete range of tube sizes commonly used in research, clinical, and laboratory environments. These tubes range from small 0.5 mL and 1.5&ndash;2 mL microtubes used in microcentrifuge applications to 5 mL and 10 mL midi tubes for intermediate sample volumes, as well as 15 mL and 50 mL conical tubes designed for cell culture, density gradient preparation, and larger-volume sample processing. They are available in polypropylene (PP) for enhanced chemical resistance and temperature tolerance or polystyrene (PS) for improved optical clarity.
&nbsp;
What you will find:
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/microcentrifuge-tubes" title="Microcentrifuge Tubes">Microcentrifuge Tubes</a> &ndash; Precision-engineered for small-volume sample preparation.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/screw-cap-tubes" title="Screw Cap Tubes">Screw Cap Tubes</a> &ndash; Secure, leak-proof closures for long-term storage and transport.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/15ml-and-50ml-centrifuge-tubes" title="15ml &amp; 50ml Centrifuge Tubes">15ml &amp; 50ml Centrifuge Tubes</a> &ndash; Standard conical bottom tubes for large-volume processing.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/midicentrifuge-tubes-5ml-and-10ml" title="Midicentrifuge Tubes (5ml &amp; 10ml)">Midicentrifuge Tubes (5ml &amp; 10ml)</a> &ndash; The perfect bridge for intermediate sample sizes.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/consumables/centrifuge-tubes/all-centrifuge-tubes/microtubes-box" title="Microtubes Box">Microtubes Box</a> &ndash; Durable storage racks for organized sample management and protection.
</li>
</ul>
&nbsp;
<h2 data-section-id="1f93yys" data-start="914" data-end="963">How to Choose From All Centrifuge Tube Formats</h2>
&nbsp;
Volume and Rotor Compatibility
Selecting the correct tube size is essential for safe and efficient centrifugation. Microtubes ranging from 0.5&ndash;2 mL are designed for microcentrifuges, while 5&ndash;10 mL midi tubes fit compatible benchtop centrifuge rotors. Larger 15 mL and 50 mL conical tubes are commonly used in clinical and research centrifuges. Always verify rotor compatibility before introducing a new tube format into your workflow.
Sterility Requirements
For sensitive applications such as RNA extraction, cell culture, and clinical diagnostics, sterile tubes certified free of RNase, DNase, and pyrogens are recommended. Non-sterile tubes can provide a cost-effective solution for routine DNA analysis, protein assays, and general sample storage where sterility is not critical.
Material Selection
Polypropylene tubes offer excellent durability, can be autoclaved at 121 &deg;C, and resist many laboratory chemicals and solvents. Polystyrene tubes provide superior transparency, making it easier to monitor liquid levels and sample contents, although they are less resistant to heat and solvents.
Packaging and Inventory Planning
Microtubes are commonly available in pack sizes ranging from 500 to 1,000 units, while 15 mL and 50 mL conical tubes are often supplied in cases of 500. Laboratories with consistent usage may benefit from establishing recurring purchase orders to ensure uninterrupted supply.
&nbsp;
<h2 data-section-id="urfo3f" data-start="2395" data-end="2433">Compare Centrifuge Tube Size Groups</h2>
&nbsp;
Microtubes (0.5&ndash;2 mL) are primarily used for PCR preparation, microcentrifuge applications, and storage of small sample volumes. These are typically manufactured from polypropylene and are available in pack sizes of 500&ndash;1,000 units.
Midi tubes (5&ndash;10 mL) support intermediate-volume centrifugation and supernatant collection. They are commonly made from polypropylene and supplied in packs ranging from 100&ndash;500 units.
15 mL conical tubes are widely used for cell pelleting, RNA isolation, and clinical sample processing. They are available in both polypropylene and polystyrene formats and are generally packaged in cases of 500.
50 mL conical tubes are designed for larger-volume workflows, including tissue culture, density gradient preparation, and sample processing. Like 15 mL tubes, they are available in polypropylene and polystyrene and are commonly sold in cases of 500.
&nbsp;
<h2 data-section-id="1ezckh3" data-start="3318" data-end="3348">Specifications and Features</h2>
&nbsp;
Globe Scientific and Nest Scientific centrifuge tubes are manufactured from USP Class VI virgin polypropylene or polystyrene resin and are certified free from detectable RNase, DNase, and pyrogens. Sterile products are irradiated using gamma or E-beam methods to achieve a sterility assurance level (SAL) of 10⁻⁶. MBP offers both racked and bagged formats for 15 mL and 50 mL conical tubes, along with dispenser-box options for selected microtube product lines that support efficient use in high-throughput laboratory environments.
For procurement teams, MBP accepts purchase orders and offers institutional pricing for bulk and high-volume purchases. <a href="https://mbpinc.net/contact-ushttps://mbpinc.net/contact-us" title="Contact the MBP team" style="color: #236fa1;">Contact the MBP team</a> today to learn more

All Centrifuge Tubes

<h2 data-section-id="kx7ycn" data-start="0" data-end="39">What Are Screw Cap Centrifuge Tubes?</h2>
&nbsp;
Screw cap centrifuge tubes are polypropylene vessels with a threaded closure that rotates to create a compression seal, typically reinforced by a silicone or polyethylene O-ring. This seal design prevents evaporation, leakage, and contamination under conditions where a snap cap fails, including high-speed centrifugation up to 20,000 &times; g, repeated freeze-thaw cycles from &minus;80 &deg;C to +121 &deg;C, exposure to volatile organic solvents, and long-term cryogenic storage. Available in volumes ranging from 0.5 mL to 2.0 mL, these tubes are commonly used in proteomics, genomics, drug discovery, biobanking, and other applications where maintaining sample integrity is critical throughout multiple processing steps.
Choose screw cap tubes instead of snap-cap tubes when working with volatile samples, repeated freeze-thaw cycles, high centrifugal forces above 16,000 &times; g, or long-term storage at &minus;80 &deg;C.
<h2 dir="ltr">&nbsp;</h2>
<h2 dir="ltr">In this part, you will discover:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
0.5mL, 1.5mL, 2.0mL (for small to moderate volume applications)
</li>
</ul>
<ul>
<li dir="ltr" aria-level="1">
O-ring caps: Leak-proof, prevents evaporation
</li>
<li dir="ltr" aria-level="1">
Tubes only: Compatible with existing caps
</li>
</ul>
<ul>
<li dir="ltr" aria-level="1">
Sterile: For sensitive, contamination-prone work
</li>
<li dir="ltr" aria-level="1">
Non-sterile: Cost-effective for routine use
</li>
</ul>
&nbsp;
<h2 data-section-id="1w7d404" data-start="949" data-end="981">How to Choose Screw Cap Tubes</h2>
&nbsp;
O-Ring vs Non-O-Ring Seal
Screw cap tubes with integrated silicone O-rings provide a hermetic seal that is ideal for volatile chemicals, infectious materials, and valuable samples where evaporative loss must be minimized. Non-O-ring designs, including rim-seal and plug-seal caps, are suitable for most routine molecular biology storage applications at temperatures between &minus;20 &deg;C and &minus;80 &deg;C and are often easier to open when working in cold environments.
Internal Thread vs External Thread
Internal-thread screw cap tubes maintain a smooth exterior profile and are generally compatible with standard microcentrifuge rotors without requiring additional adapters. External-thread designs provide easier cap handling while wearing gloves and are frequently used in self-standing tube formats that can be placed directly in racks.
Volume Selection: 0.5 mL vs 1.5 mL vs 2.0 mL
0.5 mL screw cap tubes are commonly used for concentrated enzymes, antibodies, and other valuable reagents where minimizing dead volume is important.
1.5 mL screw cap tubes are the standard choice for molecular biology applications, including RNA and DNA storage, pellet recovery, and protein fraction collection.
2.0 mL screw cap tubes provide additional capacity and headspace for bead-based extraction methods, precipitation workflows, and sample mixing procedures.
Nest Scientific offers 0.5 mL, 1.5 mL, and 2.0 mL self-standing screw cap tubes with multiple cap color options to simplify sample identification and organization.
Sterility Grade
Sterile screw cap tubes are gamma- or E-beam-irradiated to a sterility assurance level (SAL) of 10⁻⁶ and are recommended for RNA applications, clinical specimen processing, and cell culture workflows. Non-sterile RNase-free and DNase-free tubes provide a cost-effective alternative for DNA and protein-related applications.
&nbsp;
<h2 data-section-id="ibka1i" data-start="2868" data-end="2901">Compare Screw Cap Tube Options</h2>
&nbsp;
Nest Scientific self-standing screw cap tubes are available in 0.5 mL, 1.5 mL, and 2.0 mL volumes with external threads and integrated sealing rings. Rated up to 20,000 &times; g, these tubes are ideal for general sample storage and laboratories that use color-coded organization systems.
Globe Scientific self-standing screw cap tubes with silicone O-rings are offered in 1.5 mL and 2.0 mL formats. Their enhanced sealing performance makes them particularly suitable for volatile samples, cryogenic storage, and applications where maximum sample protection is required. These tubes are rated up to 20,000 &times; g.
Conical-bottom screw cap tubes are commonly available in 1.5 mL formats with internal threads and optional sealing systems. Their conical design improves pellet recovery and makes them well suited for precipitation and centrifugation workflows. These tubes can withstand centrifugal forces up to 20,000 &times; g.
Amber screw cap tubes are available in 1.5 mL and 2.0 mL capacities and feature O-ring seals for additional protection. Designed for light-sensitive samples, they are typically rated up to 16,000 &times; g and help protect reagents from light-induced degradation.
&nbsp;
<h2 data-section-id="1jl751w" data-start="4094" data-end="4119">Specifications Context</h2>
&nbsp;
Globe Scientific and Nest Scientific screw cap microtubes are manufactured from USP Class VI virgin polypropylene and are certified RNase-free, DNase-free, and non-pyrogenic by lot. Nest Scientific screw cap tubes are available with six cap color options, including blue, red, yellow, purple, green, and natural, and are typically packaged in packs of 50 tubes with 500 tubes per case. These tubes are suitable for temperatures ranging from &minus;80 &deg;C to +121 &deg;C.
As of 2026, MBP stocks both self-standing and conical-bottom screw cap tube formats from Globe Scientific and Nest Scientific. Availability may vary by volume, cap style, and color configuration.
Don't let equipment choices hold back your next breakthrough. <a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;">Contact our team at Molecular Biology Products Inc.</a> for a custom quote.

Screw Cap Tubes

2.0ml Clear Tubes with Screw Caps, Self-Standing, Non-Sterile

SCT-200SS by Novas Bio is a 2.0 mL clear medical-grade polypropylene screw-cap tube, self-standing, non-sterile, with O-ring seal. RNase-free, DNase-free, endotoxin-free by LAL method. Available in multiple cap colors.

Screw Cap Tube. 2.0ml. Self-Standing.

2.0ml Tubes with Screw Cap Tube, Conical bottom

SCT-200 by Novas Bio — 2.0 mL conical screw cap tube, medical-grade PP, DNase/RNase-free, non-pyrogenic, O-ring seal with pierceable syringe port, −80°C to +121°C, 20,000 × g rated. Non-sterile 500/pack or sterile 100/pack.

Screw Cap Tube. 2.0ml. Conical, Clear

Screw Cap Tube. 2.0ml. Conical, Green

Screw Cap Tube. 2.0ml. Conical, White

Screw Cap Tube. 2.0ml. Conical, Blue

Screw Cap Tube. 2.0ml. Conical, Yellow

Screw Cap Tube. 2.0ml. Conical, Red

8-strip Caps for use with 0.2 ml 8-strip PCR Tubes

PCR-0208CP by Novas Bio — 8-strip caps for 0.2 mL PCR tubes, medical-grade PP, DNase/RNase/human DNA-free, non-pyrogenic. Available in frosted flat (PCR-0208CP-F), optically clear flat (PCR-0208CP-RT), and clear with recessed window (PCR-0208CP-Q). 125 strips/pack.

Frosted Flat 8-Strip Cap, for writing 125/PK 10PK/CS

Optically Clear Flat 8-Strip Cap, for qPCR 125/PK 10PK/CS

Optically Clear Flat 8-Strip Cap, for qPCR, featuring recessed window 125/PK 10PK/CS

Round Well Deep Well Plates

<h2 data-section-id="8npnrj" data-start="0" data-end="40">What are Round Well Deep Well Plates?</h2>
&nbsp;
Round well deep well plates are polypropylene microplates manufactured to ANSI/SLAS (SBS) footprint standards, featuring cylindrical wells that provide greater sample volumes than standard PCR or assay plates. Typical formats include 96-well plates with capacities of 1.2 mL, 2.0 mL, or 2.2 mL per well, designed for automated sample processing, nucleic acid extraction, microbial culture, compound storage, and high-throughput laboratory workflows.
The round well geometry promotes uniform mixing, consistent liquid movement during shaking, and efficient magnetic bead collection during automated extraction procedures. Unlike square well plates, which maximize storage volume, round well plates are preferred when sample recovery, mixing performance, and magnetic bead handling are critical.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
96-round well storage plates
</li>
<li dir="ltr" aria-level="1">
1.2ml deep well plates
</li>
<li dir="ltr" aria-level="1">
2.0ml round well plates
</li>
<li dir="ltr" aria-level="1">
Sterile deep well microplates
</li>
<li dir="ltr" aria-level="1">
DNase and RNase-free plates
</li>
<li dir="ltr" aria-level="1">
U-bottom deep well plates
</li>
<li dir="ltr" aria-level="1">
Polypropylene storage plates
</li>
<li dir="ltr" aria-level="1">
Automation-compatible round well plates
</li>
<li dir="ltr" aria-level="1">
Silicone sealing mats
</li>
</ul>
&nbsp;
<h2 data-section-id="m2xmka" data-start="1392" data-end="1436">How to Choose Round Well Deep Well Plates</h2>
&nbsp;
Well Volume
The 1.2 mL round well plate is specified for smaller-input nucleic acid extraction protocols (blood, plasma, swab) and fits automated deck formats with restricted Z-height clearance. The 2.0 mL round well format accommodates larger sample input volumes for high-yield extractions and is the standard format for Nest Scientific deep well plates used in nucleic acid processing. Confirm working volume versus total well volume in the product specification &mdash; a 2.0 mL plate typically has a total volume of 2,200&ndash;2,400 &micro;L.
Bottom Geometry
U-bottom (hemispherical) round wells are standard for sample storage, bacterial and cell culture, and general liquid handling where complete aspiration is not required. V-bottom (conical) round wells concentrate liquid and pellet to the lowest point for complete aspiration and enhanced pellet recovery, preferred in enzymatic assay and precipitation protocols. Flat-bottom round well plates are used when an optical flat surface is needed for absorbance-based assay measurement.
Sterility Requirements
Non-sterile round well deep well plates manufactured in ISO 8 cleanrooms satisfy most nucleic acid extraction and sample processing workflows. Sterile options (gamma-irradiated, SAL 10⁻⁶) are required for cell culture, bacterial culture, and RNA extraction from live cells. Autoclavable polypropylene formats provide a cost-effective reusable sterile option for labs with autoclave access.
Centrifugation and Sealing
Standard round well deep well plates are rated 4,000&ndash;6,000 &times; g. Raised well rims ensure consistent sealing with adhesive films, heat-seal foils, and pre-slit silicone mats. Nest Scientific 96-well round well silicone sealing mats (pre-slit, 7 mm diameter) are compatible with 0.35&ndash;1.35 mL round well plates.
Automation Compatibility
Specify virgin polypropylene, lot-certified DNase-free, RNase-free, DNA-free, and PCR inhibitor-free for nucleic acid extraction. Nest Scientific deep well plates use USP Class VI polypropylene material with high chemical stability for demanding extraction workflows.
&nbsp;
<h2 data-section-id="1jl751w" data-start="4818" data-end="4843">Specifications Context</h2>
&nbsp;
Round well deep well plates are manufactured from high-purity polypropylene and are commonly rated for temperatures from &minus;80&deg;C to +121&deg;C, supporting freezer storage and autoclave sterilization. Premium plates are produced from USP Class VI resins and tested for DNase, RNase, DNA, and PCR inhibitor contamination.
The 96-well 2.0 mL U-bottom round well plate remains one of the most widely used formats for automated nucleic acid extraction, biobanking, bacterial culture, and sample preparation workflows due to its balance of volume capacity, automation compatibility, and reliable magnetic bead performance.
Browse our range and <a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;">request a quote from the MBP team</a> to find the right fit for your lab.

96-well Deep Well Plates, Polypropylene

DWP-20-SQV is a clear polypropylene 96-well deep well plate with 2.0 mL square V-bottom wells. Certified RNase-free, DNase-free, human DNA-free, and non-pyrogenic. SBS/ANSI footprint for standard liquid handlers. Suitable for nucleic acid extraction, sample storage, and high-throughput compound work.

Bottom Style

Well Style

2.0ml 96-well Deep Well Plate, Polypropylene, 2.0 mL, Clear, V-Bottom, Square Wells, 10/Pk, 5 Pks/Cs

2.0ml 96-well Deep Well Plate, Polypropylene, 2.0 mL, Clear, U-Bottom, Square Wells, 10/Pk, 5 Pks/Cs

2.0ml 96-well Deep Well Plate, Polypropylene, 2.0 mL, Clear, U-Bottom, Round Wells, 10/Pk, 5 Pks/Cs

1.1ml 96-well Deep Well Plate, Polypropylene, 1.1 mL, Clear, U-Bottom, Round Wells, 10/Pk, 5 Pks/Cs

PCR & qPCR Film

96-well Sequencing Mat for ABI systems. Fits ABI 3100, 96-well (ABI Style) plates.

SM96-SEPTA3100 by Novas Bio is a 96-well silicone sequencing septa mat for ABI 3100 and ABI-style plates. Pierceable, self-sealing, autoclavable, and reusable. RNase-free, DNase-free, human DNA-free, and non-pyrogenic.

Data Sheet-SCT-050SS-C-S

Data Sheet-SCT-150-C-S

Data Sheet-SCT-150SS-C-S

Clear Tube with Screw Caps, Preassembled, Sterile

SCT-050SS-C-S Group by Novas Bio — sterile self-standing screw-cap tubes in 0.5 mL, 1.5 mL, and 2.0 mL formats. ANSI/AAMI/ISO 11137, SAL 10⁻⁶, endotoxin/RNase/DNase/BSE-TSE-free.

Screw Cap Tube. 0.5ml. Self-Standing. Sterile. Preassembled.

Screw Cap Tube. 1.5ml. Conical. Sterile. Preassembled.

Screw Cap Tube. 1.5ml. Self-Standing. Sterile. Preassembled.

Screw Cap Tube. 2.0ml. Self-Standing. Sterile. Preassembled.

Filtered Pipette Tips

<h2 dir="ltr"> What Are Filtered Pipette Tips?</h2>
 Filtered pipette tips contain a hydrophobic aerosol-barrier plug &mdash; polyethylene (PE) frit or cellulose &mdash; embedded inside the tip body, positioned to intercept aerosol and liquid that would otherwise travel up through the tip collar into the pipette barrel during dispensing or when handling volatile or splashing samples. The filter protects the pipette barrel from internal contamination (which requires costly professional decontamination) and protects samples from cross-contamination by previously deposited nucleic acids, proteins, or biohazardous material in the barrel. Filtered tips are the standard consumables for PCR and qPCR setup, RNA extraction, cDNA synthesis, working with radioactive or biohazardous agents, and any workflow where a single contaminated barrel could compromise a run or an experiment. Non-filtered tips remain appropriate for routine buffer, media, and reagent dispensing where cross-contamination through the barrel is not a concern. Use filtered tips for all nucleic acid work, PCR, and biohazardous samples; use standard tips for routine buffer and reagent dispensing.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li><a href="https://mbpinc.net/consumables/liquid-handling-products/pipette-tips/universal-fit-pipette-tips" title="Universal Fit Filter Tips">Universal Fit Filter Tips:</a> &ndash; Designed to fit a wide range of standard pipettes, with options including wide-bore, low-retention, sterile, RNase/DNase-free, and aerosol barrier formats to support diverse liquid handling applications while maintaining sample integrity.</li>
<li><a href="https://mbpinc.net/consumables/liquid-handling-products/filtered-pipette-tips/lts-compatible-filter-tips" title="LTS Compatible Filter Tips:">LTS Compatible Filter Tips:</a>&nbsp;Optimized for high-performance pipetting systems, featuring extended-length and rack-packed configurations for deep-vessel access, with bulk-pack options available to support reliable, high-throughput laboratory workflows.</li>
</ul>
<h2 dir="ltr"> How to Choose Filtered Pipette Tips</h2>
 Filter Material: Polyethylene Frit vs Cellulose Hydrophobic PE frits are the most common and most studied aerosol-barrier material; they block liquid ingress reliably without absorbing sample material or releasing fibres. Cellulose filters are used in some barrier tips (including the original Thermo Barrier tips); they are effective aerosol barriers but can absorb a small volume of aqueous sample, relevant at &le;10 &micro;L, where the absorbed volume is proportionally significant.
Universal Fit vs LTS-Compatible Filtered Tips Universal filtered tips use standard collar geometry (3.8 mm for &le;10 &micro;L, 6.1 mm for &le;200 &micro;L) and fit Eppendorf, Rainin Classic (non-LTS), and Thermo pipettes. LTS-compatible filtered tips use Rainin's cylindrical LTS mounting geometry and are required for Rainin LTS pipettes.&nbsp;
Low-Retention Filtered Tips Low-retention filtered tips combine an aerosol barrier with a hydrophobic inner tip wall, reducing liquid adhesion during dispensing. They are recommended for small-volume (&le;10 &micro;L) nucleic acid work, RNA, protein, and enzyme dispensing, where both contamination protection and volume accuracy are critical.
Volume Range Filtered tips are available across 10 &micro;L (P2&ndash;P10), 20 &micro;L (P20), 100 &micro;L (P100), 200 &micro;L (P200), 300 &micro;L, 1,000 &micro;L (P1000), and 1,250 &micro;L extended formats. Extended-length filtered tips reach deep into 15 mL and 50 mL conical tubes for nucleic acid elution and sample transfer steps.
Packaging Filtered tips are typically sterile-racked (96/rack, 10 racks/box); reload/refill formats are available for high-volume filter tip users.
<h2 dir="ltr"> Specifications Context</h2>
 Globe Scientific filter tips are certified free of human DNA, RNase, DNase, pyrogens, and PCR inhibitors; sterile, in flip-top or hinged racks. Sorenson Bioscience universal filter tips span 10&ndash;1,250 &micro;L in standard rack and EcoRack reload formats, pre-sterilised, DNase/RNase-free. Invitrogen Barrier Tips (Thermo Fisher) are the original reference for nucleic acid work with cellulose filter elements; compatible with Eppendorf pipettes. Globe Scientific, Nest Scientific, and Sorenson Bioscience filtered tips are stocked by MBP Inc.&nbsp; 
&nbsp;
Don&rsquo;t let cross-contamination stall your progress. <a href="https://mbpinc.net/contact-us" style="color: #236fa1;">Reach out to the MBP team</a> today for a quote or to find the perfect fit for your specific pipette brand.

Filter tips, Racked, Sterile

FT-10-R-S by LABSELECT — 10 µL sterile racked filter tips, virgin PP with hydrophobic PE filter, 96 tips/rack, 10 racks/unit (960 tips/unit). Sterile, DNase-free, RNase-free, nonpyrogenic, noncytotoxic. Universal pipette fit.

10 ul Filtered Tip, Racked, PreSterilized.96 x 10 Tips/Pk, 5PK/CS

10 ul Filtered Tip, Racked, PreSterilized. Extended length tip.96 x 10 Tips/Pk, 5PK/CS

20 ul Filtered Tip, Racked, PreSterilized.96 x 10 Tips/Pk, 5PK/CS

100 ul Filtered Tip, Racked, PreSterilized.96 x 10 Tips/Pk, 5PK/CS

200 ul Filtered Tip, Racked, PreSterilized.96 x 10 Tips/Pk, 5PK/CS

1000 ul Filtered Tip, Racked, PreSterilized. Extended length tip.96 x 10 Tips/Pk, 5PK/CS

General Application (PCR and Storage) Sealing Films

SF-AS-400 General Application Sealing Films by Novasbio are adhesive plate seals for standard PCR and storage, available in pierceable aluminium (SF-AS-400), polyester PCR/storage (SF-TS-600, −20°C to +120°C), and storage-only polyester (SF-TS-200) formats. All are DNase/RNase/human-DNA-free. Available from MBP Inc.

LT Storage Aluminum sealing film for Long Term Storage. Pierceable. 100/PK 5PK/CS

PCR, Storage General application sealing film for PCR and Storage 100/PK 5PK/CS

Storage General application sealing film for Storage 100/PK 5PK/CS

PCR Plates

<h2 data-path-to-node="3">What Are PCR Plates?</h2>
 PCR plates are single-use, thin-wall polypropylene multi-well vessels designed for the thermal cycling demands of PCR, qPCR, RT-PCR, and genotyping. The 96-well format (12 columns &times; 8 rows) is the standard for most research and clinical labs; 384-well plates serve ultra-high-throughput applications. Well volumes are 0.2 mL (standard profile) for conventional block cyclers or 0.1 mL (low profile) for fast-block instruments. The skirt &mdash; the rigid plastic border surrounding the well array &mdash; determines automation compatibility, cycler lid clearance, and plate rigidity.&nbsp;
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li data-section-id="1xmdc3x" data-start="0" data-end="87"><a href="https://mbpinc.net/consumables/pcr-consumables/pcr-plates/semi-skirted-plates">Semi-skirted PCR plates: </a>for a balance of plate rigidity and instrument compatibility.</li>
<li data-section-id="y5pq2h" data-start="89" data-end="156"><a href="https://mbpinc.net/consumables/pcr-consumables/pcr-plates/hard-shell-pcr-plates">Hard shell PCR plates: </a>designed with a reinforced plate structure.</li>
<li data-section-id="8t808z" data-start="158" data-end="243"><a href="https://mbpinc.net/consumables/pcr-consumables/pcr-plates/skirted-pcr-plates">Skirted PCR plates:</a> featuring a full peripheral skirt for enhanced handling support.</li>
<li data-section-id="1d0aj4c" data-start="245" data-end="343" data-is-last-node=""><a href="https://mbpinc.net/consumables/pcr-consumables/pcr-plates/non-skirted-pcr-plates">Non-skirted PCR plates:</a> with a compact design for applications requiring minimal plate footprint.</li>
</ul>
&nbsp;
<h2 data-path-to-node="3">How to Choose PCR Plates</h2>
 Skirt Format Fully-skirted plates have a full-height ANSI/SBS-compliant border (127.76 &times; 85.47 mm footprint) and are required for robotic liquid handlers (Hamilton STAR, Tecan EVO, PerkinElmer JANUS) and automated stackers. Semi-skirted plates have a partial skirt providing enough rigidity for multichannel pipetting while maintaining thermal cycler block compatibility across a wider range of instruments. Non-skirted plates have no border and fit virtually any cycler block, including instruments whose compression lids would be obstructed by a full skirt. Well Profile: Standard vs Low-Profile Standard-profile 0.2 mL wells are used with conventional (tall) block cyclers. Low-profile 0.1 mL wells are required for fast-block instruments, including the Applied Biosystems QuantStudio, Bio-Rad CFX96 Fast, and Roche LightCycler 480, where the reduced well depth shortens the thermal path to the sample. Colour: Clear, White, or Black Clear plates allow visual inspection of well volumes and are the default for end-point PCR. White plates increase qPCR sensitivity in bottom-read optical systems by reflecting fluorescence emission back through the detector. Black plates reduce background fluorescence in probe-based assays where cross-well optical interference is a concern. Sealing Compatibility Skirted and semi-skirted plates seal reliably with adhesive films and heat sealers; the rigid skirt supports even film application and reduces edge-well evaporation. Non-skirted plates require cap mats or adhesive seals that adhere directly to the well rim. 
<h2 data-path-to-node="3"> Specifications Context</h2>
 PCR plates are moulded from virgin, low-extractable medical-grade polypropylene; well walls are uniformly thin (typically 0.25&ndash;0.35 mm) to maximise thermal conductivity. ANSI/SBS footprint standard (127.76 &times; 85.47 mm) applies to skirted plates for instrument interoperability. Plates are certified DNase-free, RNase-free, human DNA-free, and PCR inhibitor-free per lot. Cut corners (typically at H1/A12 position) and alpha-numeric well labelling aid plate orientation.Thermo Fisher SuperPlate skirted formats are the leading references for robotic applications; semi-skirted plates from Sorenson and equivalent lines serve the broad research market.&nbsp; 
<a href="https://mbpinc.net/contact-us">Connect with the MBP team </a>today to request a quote and find the perfect PCR plate configuration for your lab's specific needs.

<h2 dir="ltr">What Are Non-Skirted PCR Plates?</h2>
 Non-skirted PCR plates are 96-well polypropylene thermal cycling plates with no surrounding plastic border. The absence of a skirt gives them the lowest possible profile, making them compatible with the widest range of thermal cyclers &mdash; including older instruments and those with compression lids that leave insufficient clearance for a full or partial skirt. They are the standard choice for manual PCR workflows and labs that prioritise cycler compatibility over automation capability. 
&nbsp;
<h2 dir="ltr">What you will find :<a href="https://mbpinc.net/non-skirted-pcr-plates" title="Non-Skirted PCR Plates"></a></h2>
&nbsp;
<ul data-start="458" data-end="876">
<li style="color: #000000;" data-section-id="zgfdeq" data-start="458" data-end="544">Hard Shell 384-well PCR plates with rigid frame for stability in high-throughput runs</li>
<li style="color: #000000;" data-section-id="rvpzml" data-start="545" data-end="623">Non-skirted 96-well PCR plates, a&nbsp;standard format for routine PCR workflows</li>
<li style="color: #000000;" data-section-id="1ytzau2" data-start="624" data-end="707">Hard Shell 96-well PCR plates with&nbsp;added durability and consistent well alignment</li>
<li style="color: #000000;" data-section-id="pvkgth" data-start="708" data-end="796">Globe Scientific No Skirt PCR Plates, a trusted brand option for reliable performance</li>
<li style="color: #000000;" data-section-id="1teu7sn" data-start="797" data-end="876">PCR Plates, No Skirt general-purpose plates for everyday PCR applications</li>
</ul>
<h2 dir="ltr"> How to Choose Non-Skirted PCR Plates</h2>
 Well Profile: Standard vs Low-Profile Standard-profile 0.2 mL non-skirted plates fit conventional tall-block cyclers, including Bio-Rad T100 and Eppendorf Mastercycler. Low-profile 0.1 mL non-skirted plates are used with fast-block qPCR instruments such as Bio-Rad CFX96 Fast and Applied Biosystems StepOnePlus, where the compression lid requires a low plate profile. Divisible vs One-Piece Plates Divisible (breakable) non-skirted plates are perforated between rows or columns, allowing the plate to be separated into 8-tube strips or smaller sections. This format suits labs running fewer than 96 reactions per plate and reduces plastic waste by avoiding partial-plate discard. One-piece plates are the standard format for full 96-well workflows. Colour: Clear vs White Clear non-skirted plates are standard for end-point PCR and top-read qPCR. White non-skirted plates improve fluorescence sensitivity in bottom-read optical configurations on instruments such as the Applied Biosystems QuantStudio bottom-read modes. Handling Considerations Non-skirted plates are less rigid than skirted formats and can flex during multichannel pipetting if not supported by a plate rack or nest. Use a non-skirted plate rack when dispensing with an 8-channel pipette to prevent well deflection and inconsistent fill volumes. Cap Mats and Sealing Non-skirted plates are sealed with cap mats (silicone or rubber) or adhesive films applied directly to well rims. The absence of a skirt means that heat sealer clamping must be applied carefully to avoid plate deformation. 
<h2 dir="ltr"> Specifications Context</h2>
 Non-skirted plates are moulded from virgin polypropylene with uniformly thin, well walls (0.25&ndash;0.35 mm) for rapid thermal conductivity. The well colour options (clear, white) affect optical performance; clear is the default. Certified DNase-free, RNase-free, human DNA-free, and PCR inhibitor-free per independent lot testing. As of 2026, non-skirted plates remain the highest-volume PCR plate format globally due to broad cycler compatibility and the lowest per-plate cost.&nbsp; 
&nbsp;
<a href="https://mbpinc.net/contact-us">Reach out to the MBP team </a>to request details or pricing for the right fit for your lab.

Non-Skirted PCR Plates

<h2>What Are Semi-Skirted PCR Plates?</h2>
 Semi-skirted PCR plates have a partial plastic border extending approximately half the height of a fully skirted plate, surrounding part of the well array. This partial skirt adds enough structural rigidity to support multichannel pipetting. It provides a surface for labelling, while keeping the overall plate height low enough for compatibility with most thermal cycler compression lids that a full skirt would obstruct. Semi-skirted plates represent the most common format in routine qPCR and genotyping labs, where fully automated robotic handling is not required. Semi-skirted is the default choice for most routine PCR and qPCR labs that mix manual pipetting with occasional automated steps. 
&nbsp;
<h2 data-start="476" data-end="501">What you will find: </h2>
<ul data-start="502" data-end="1108">
<li style="color: #000000;" data-section-id="47u9b8" data-start="502" data-end="589">Hard shell 384-well PCR plates &ndash; enhanced rigidity for high-throughput applications</li>
<li style="color: #000000;" data-section-id="1oohzes" data-start="590" data-end="670">Semi-skirted, 96-well PCR plates &ndash; balanced design for routine PCR workflows</li>
<li style="color: #000000;" data-section-id="1n8sxu4" data-start="671" data-end="748">Hard Shell 96-well PCR plates &ndash; improved structural support and alignment</li>
<li style="color: #000000;" data-section-id="1gxz5rn" data-start="749" data-end="830">Globe Scientific Half Skirt PCR Plates &ndash; reliable option from a trusted brand</li>
<li style="color: #000000;" data-section-id="wcryl4" data-start="831" data-end="897">PCR Plates, Semi Skirt &ndash; versatile plates for standard lab use</li>
<li style="color: #000000;" data-section-id="dlek6q" data-start="898" data-end="985">96-well Duo Material PCR plate &ndash; optimized materials for performance and durability</li>
<li style="color: #000000;" data-section-id="4vb9o1" data-start="986" data-end="1108">Semi-Skirt 96 Plate, Clear Polypropylene, Non-Sterile &ndash; clear construction for visibility and general applications</li>
</ul>
<h2> How to Choose Semi-Skirted PCR Plates</h2>
 Well Profile and Volume Low-profile 0.1 mL semi-skirted plates are the standard for qPCR on fast-block instruments, including Bio-Rad CFX96, Applied Biosystems StepOnePlus, and Roche LightCycler 480. Standard-profile 0.2 mL wells work with conventional block cyclers and accommodate larger reaction volumes for cloning or high-concentration template workflows. Colour: Clear vs White Clear semi-skirted plates suit end-point PCR and top-read qPCR systems. White semi-skirted plates increase fluorescence signal in bottom-read qPCR optical configurations. Thermo Fisher offers white semi-skirted formats for this application. Cut Corner for Orientation Semi-skirted plates typically feature a notched or cut corner at the A12 position for plate orientation &mdash; a feature originating in sequencing plate formats and now standard across most qPCR-compatible semi-skirted plates. Confirm the cut corner position against your instrument's plate alignment specification. Sealing The partial skirt of semi-skirted plates supports adhesive film sealing and is compatible with most heat sealers. The skirt also reduces edge-well evaporation compared to non-skirted plates, improving Ct uniformity across plate positions. Robotic Compatibility Semi-skirted plates provide enough grip surface for some robotic arm designs and are listed as compatible with select liquid handlers; however, for demanding robotic workflows with gripper systems or conveyor belts, fully skirted ANSI/SBS-compliant plates remain the correct specification. 
<h2> Specifications Context</h2>
 Semi-skirted 96-well plates are moulded from virgin polypropylene with uniformly thin walls (0.25&ndash;0.35 mm) for consistent thermal conductivity. The partial skirt height is approximately 50% of a full ANSI/SBS skirt height, placing the plate between non-skirted and fully skirted in both rigidity and cycler compatibility. All plates are independently certified DNase-free, RNase-free, human DNA-free, and PCR inhibitor-free per lot.&nbsp; 
&nbsp;
Let <a href="https://mbpinc.net/contact-us">the MBP team&nbsp;</a>help you choose the right plate format to match your workflow and instrumentation.

Semi-Skirted Plates

<h2 data-path-to-node="1"> What Are Skirted PCR Plates?</h2>
 Skirted PCR plates are 96-well polypropylene thermal cycling plates with a full-height plastic border &mdash; the skirt &mdash; surrounding the well array. The skirt raises the overall plate height to match the ANSI/SBS microplate footprint standard (127.76 &times; 85.47 mm external dimensions), creating a uniform grip surface that robotic arms, plate grippers, and automated stackers can handle reliably. They are the required format for liquid-handling automation platforms and high-throughput PCR workflows where consistent plate positioning is critical. Choose fully skirted plates when your workflow involves robotic liquid handling, automated stackers, or plate readers requiring SBS-compliant positioning.
&nbsp;
<h2 data-path-to-node="4">What You Will Find: </h2>
<ul data-path-to-node="5">
<li>
Hard Shell 384-well PCR Plates<a href="https://www.google.com/search?q=https://mbpinc.net/product-category/consumables/pcr-consumables/pcr-plates/hard-shell-pcr-plates/" style="color: #000000;"> </a>&ndash; The industry standard for high-throughput screening and automated liquid handling.
</li>
<li style="color: #000000;">
Hard Shell 96-well PCR Plates &ndash; Combining rigidity with a 96-well format for routine yet high-precision workflows.
</li>
<li style="color: #000000;">
Globe Scientific Full Skirt PCR Plates &ndash; Reliable, automation-friendly plates designed for consistent thermal cycling.
</li>
<li style="color: #000000;">
Full Skirt PCR Plates<a _ngcontent-ng-c3793280901="" target="_blank" rel="noopener" externallink="" _nghost-ng-c3773094726="" jslog="197247;track:generic_click,impression,attention;BardVeMetadataKey:[[&quot;r_98f8600e63dbeb30&quot;,&quot;c_c4e8a23c27447c36&quot;,null,&quot;rc_fa92ce727d8e45fc&quot;,null,null,&quot;en&quot;,null,1,null,null,1,0]]" href="https://www.google.com/search?q=https://mbpinc.net/product-category/consumables/pcr-consumables/pcr-plates/skirted-pcr-plates/" class="ng-star-inserted" data-hveid="0" decode-data-ved="1" data-ved="0CAAQ_4QMahgKEwjZx-625v-TAxUAAAAAHQAAAAAQsAQ" style="color: #000000;"></a> &ndash; Features a full perimeter skirt for superior stability and easy gripping during automated handling.
</li>
<li style="color: #000000;">
96-well Duo Material PCR Plate&ndash; Engineered with dual-material technology to eliminate plate warping and bowing.
</li>
<li style="color: #000000;">
Skirted 96 Plate, Non-Sterile, Clear Polypropylene<a href="https://mbpinc.net/product/skirted-96-well-plate-28440-5" title="Skirted 96 Plate, Non-Sterile, Clear Polypropylene" style="color: #000000;"> </a>&ndash; A durable and cost-effective solution for high-volume lab processing.
</li>
</ul>
<h2 data-path-to-node="1"> How to Choose Skirted PCR Plates</h2>
 Well Profile: Low-Profile vs Standard Low-profile 0.1 mL wells are the current default for skirted qPCR plates; the reduced well depth minimises dead volume and supports faster thermal ramp rates on fast-block instruments, including Bio-Rad CFX96 Fast, Applied Biosystems QuantStudio, and Roche LightCycler 480. Standard-profile 0.2 mL wells are used with conventional tall-block cyclers and maximise reaction volume capacity. Colour: Clear, White, or Black Clear skirted plates are the standard for visual inspection and top-read fluorescence systems. White plates increase qPCR sensitivity by up to 2-fold on bottom-read optical configurations by reflecting fluorescence emission back through the detector. Black plates reduce inter-well optical crosstalk in probe-based assays where background fluorescence must be minimised. Two-Component vs One-Component Construction One-component (single polypropylene) skirted plates are cost-effective for general use. Two-component designs combine a polypropylene well array with a polycarbonate skirt to eliminate plate warping at high cycling temperatures, enabling precise robotic positioning even after repeated thermal stress. Barcoding Barcoded skirted plates support LIMS integration and automated sample tracking across multi-step workflows. Barcodes are typically laser-etched (permanent) or adhesive-applied; confirm barcode type before integrating with your lab information management system. Cut Corner Orientation A cut corner at the H1 position (standard) or A12 position aids correct plate orientation in cyclers and liquid handlers. Confirm the required cut corner with your instrument's loading specification. 
<h2 data-path-to-node="1"> Specifications Context</h2>
 Skirted PCR plates conform to ANSI/SBS (also called ANSI/SLAS 1-2004) footprint standards: 127.76 &times; 85.47 mm with 9 mm well spacing. Well walls are uniformly thin (0.25&ndash;0.35 mm) virgin polypropylene; maximum well volume with adhesive film seal is 0.2 mL for standard and 0.1 mL for low-profile formats. Certified DNase-free, RNase-free, human DNA-free, and PCR inhibitor-free per independent lot testing. Thermo Scientific SuperPlate are the leading references for demanding automation applications. Last updated: June 2026.
 If you need help picking the right plate for your system, <a href="https://mbpinc.net/contact-us" style="color: #236fa1;">the MBP team</a> can guide you based on your setup and workflow.

Skirted PCR Plates

<h2 data-path-to-node="1">What Are Hard Shell PCR Plates?</h2>
 Hard shell PCR plates use a two-component construction: a rigid, high-strength polycarbonate (PC) frame forms the outer shell and skirt, while individual thin-wall polypropylene (PP) wells are insert-moulded or press-fitted into the frame. The polycarbonate shell provides the dimensional rigidity required for automated robotic handling and eliminates the plate warping that occurs in single-component polypropylene plates subjected to repeated 95&deg;C denaturation cycles. The PP wells retain the thermal conductivity and PCR-compatible chemistry of standard polypropylene reaction vessels. Choose hard shell plates when warp prevention and robotic precision positioning are non-negotiable, particularly for high-cycle qPCR and automated NGS library prep.
&nbsp;
<h2 data-path-to-node="2">What you will find:</h2>
&nbsp;
<ul data-path-to-node="3">
<li data-section-id="p1n0z3" data-start="25" data-end="110">384-well hard-shell PCR plates designed for high-throughput PCR and qPCR workflows.</li>
<li data-section-id="1ljmj6f" data-start="111" data-end="207">Rigid plate construction to help minimize warping during thermal cycling and robotic handling.</li>
<li data-section-id="6m8jtv" data-start="208" data-end="312">Standard SBS-format plates compatible with many automated liquid handling systems and thermal cyclers.</li>
<li data-section-id="ipzqp0" data-start="313" data-end="406">Plate options suitable for low-volume reaction setups common in high-density assay formats.</li>
<li data-section-id="gz6w7i" data-start="407" data-end="507" data-is-last-node="">Configurations designed to support consistent sample processing across large numbers of reactions.</li>
</ul>
<h2 data-path-to-node="1"> How to Choose Hard-Shell PCR Plates</h2>
 Well Volume and Profile Low-profile 0.1 mL (100 &micro;L working volume) hard shell plates are the standard for fast-block qPCR instruments, including Bio-Rad CFX96 Fast, Applied Biosystems QuantStudio, and Roche LightCycler 480, where reduced well depth shortens the thermal path and enables faster ramp rates. Standard-profile 0.2 mL hard shell plates are used with conventional tall-block cyclers for larger reaction volumes. Colour: Clear, White, or Black Clear hard shell plates are standard for top-read fluorescence and end-point PCR. White PP wells increase qPCR fluorescence sensitivity on bottom-read optical configurations by reflecting emission signal back through the detector &mdash; a meaningful advantage for low-abundance targets. Black plates minimise inter-well optical crosstalk in multiplexed probe-based assays. Raised Rim Design Hard shell plates typically feature a raised rim around each well that creates a compression seal with adhesive films, heat seals, and cap strips, reducing edge-well evaporation &mdash; a primary cause of uneven Ct values across the plate. Barcoding and Alphanumeric Labelling Hard shell plates are the preferred format for barcode integration due to the flat, rigid skirt surface. Laser-etched and adhesive barcodes are available for LIMS integration; black alphanumeric well lettering aids orientation during manual plate setup. Sealing Compatibility Hard shell plates are compatible with heat sealers, pressure sealers, adhesive optical films, and aluminium foil seals; the PC frame provides rigid support for even heat sealer platen contact. 
<h2 data-path-to-node="1"> Specifications Context</h2>
 The two-component PC/PP construction delivers a plate that is significantly more dimensionally stable than single-component PP plates after repeated 95&deg;C cycling. ANSI/SBS footprint (127.76 &times; 85.47 mm) with 9 mm well spacing. PP wells are certified DNase-free, RNase-free, human DNA-free, and PCR inhibitor-free per independent lot testing. Bio-Rad Hard-Shell Low-Profile Skirted (HSP9655 series) and Thermo Scientific SuperPlate are the leading reference formats for demanding automation. Equivalent hard-shell plates from Globe Scientific and Nest Scientific lines provide research-grade performance at a lower cost.&nbsp;
&nbsp;
Share your current workflow with<a href="https://mbpinc.net/contact-us"> the MBP team</a>, and we&rsquo;ll help you find the right solution so you can focus on results, not problems.

Hard Shell PCR Plates

Hard shell 384-well PCR plates

Hard Shell 384-Well PCR Plates (HP384) by MBP — full skirted, 40 µL per well, thin-wall hard polypropylene, made in the USA. Compatible with all standard 384-well qPCR thermal cyclers. Multiple frame and well color options available.