Sample Cups

<h2 dir="ltr">What are Automation Sample Cups?</h2>
 Automation sample cups (also called analyzer sample cups, autosampler cups, or J-cups) are small-volume polystyrene or polypropylene vessels designed to hold aliquoted patient specimens for direct loading into automated clinical chemistry analyzers, immunoassay platforms, hematology analyzers, and ICP-MS/ICP-OES spectrometers. They are used when an analyzer's primary tube handler cannot directly aspirate from a standard 15 mL or 50 mL collection tube&mdash;typically because the sample volume is insufficient, a diluted aliquot is required, or a specific cup geometry is mandated by the instrument's sampling needle. Globe Scientific offers the largest selection of alternate (OEM-equivalent) sample cups for laboratory analyzers, providing significant per-cup savings versus manufacturer-supplied consumables. Choose analyzer sample cups by instrument model first&mdash;dimensional compatibility is non-negotiable&mdash;then optimize for material (PS for optical clarity, PP for chemical resistance) and volume.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
0.2 mL automation sample cups for micro-volume testing
</li>
<li dir="ltr" aria-level="1">
0.5 mL sample cups for routine analyzer use
</li>
<li dir="ltr" aria-level="1">
1.5 mL sample cups for standard clinical workflows
</li>
<li dir="ltr" aria-level="1">
Clear polystyrene sample cups for accurate readings
</li>
<li dir="ltr" aria-level="1">
Conical-bottom cups for complete sample pickup
</li>
<li dir="ltr" aria-level="1">
Low-dead-volume cups for minimal sample waste
</li>
<li dir="ltr" aria-level="1">
Analyzer-compatible sample cups for clinical systems
</li>
<li dir="ltr" aria-level="1">
Disposable sample cups for single-use workflows
</li>
<li dir="ltr" aria-level="1">
Nesting cups for easy storage and handling
</li>
</ul>
<h2 dir="ltr"> How to Choose Automation Sample Cups</h2>
 Instrument Compatibility: Dimensional Match is Mandatory Automation sample cups must match the exact outer diameter, height, and cup-bottom geometry specified by the instrument manufacturer. A cup that is 0.5 mm too wide or too narrow will not seat correctly in the autosampler rotor, causing aspiration failures, pipetting errors, or instrument alarms. Globe Scientific engineers and validates each alternate cup to OEM specifications for named analyzer platforms; confirm the instrument model against the catalog's compatibility list before ordering. Volume: 0.5 mL vs. 1.5 mL vs. 2.0 mL 0.5 mL cups (13.55 &times; 24.50 mm, polystyrene) are used on chemistry analyzers including Beckman CX series, Alpha Wassermann, Bio-Chem Labs, and DPC Immulite platforms. 1.5 mL cups (13.8 &times; 22.60 mm) are used on BioMerieux AG-2/ASCA and MLA 1600C platforms. Larger 2.0 mL cups are used on Roche cobas and Horiba ABX platforms. The minimum working volume of the cup must exceed the analyzer's dead volume (typically 150&ndash;400 &micro;L) plus the required sample volume. Material: Polystyrene vs. Polypropylene Polystyrene (PS) sample cups provide excellent optical clarity for colorimetric-based analyzers that photometrically read the cup contents and have low protein adsorption for routine chemistry analytes. Polypropylene (PP) cups are used when the sample contains organic solvents, strong acids (trace element analysis), or when acid-wash protocols are required for ICP-MS autosampler systems. MoldPro and Globe Scientific PP autosampler cups for PerkinElmer, Agilent, and Shimadzu ICP systems are manufactured from virgin PP with ultra-low metal content verified by ICP-MS lot testing. With or Without Caps/Inserts Sample cups with caps are used when the aliquot must be sealed to prevent evaporation or cross-contamination during batch loading. Insert cups (smaller inner cup that sits inside a standard tube) allow aliquoted samples to be loaded directly without relabeling &mdash; a common efficiency gain in high-volume core labs. Confirm whether your instrument's autosampler accepts capped cups or requires open-top formats. ICP-MS vs. Clinical Chemistry Applications ICP-MS autosampler cups require certified ultra-low metal content (verified by ICP-MS at ppb level), manufactured from virgin PP without metal-containing additives, dyes, or fillers. Standard PS clinical chemistry cups contain low-level metal additives from colorants and should not be used for trace element or heavy metal analysis. Always use metal-free certified cups for any elemental analysis application. 
<h2 dir="ltr"> Specifications Context</h2>
 Globe Scientific analyzer sample cups are manufactured to exact OEM specifications and provide equivalent precision and optical properties to original manufacturer cups. PS cups have optical clarity with &ge;90% light transmission in the visible spectrum, required for photometric analyzers. PP ICP-MS autosampler cups meet ultra-low metal content specifications: typically &lt;1 ppb for Fe, Zn, Cu, Pb, Mn, and other analytes commonly measured in trace element panels. Cup dimensions are held to &plusmn;0.1 mm tolerance on O.D. to ensure consistent seating in autosampler rotors. As of 2026, Globe Scientific is the most widely stocked alternate analyzer consumable brand through lab distributors, including MBP, offering per-cup savings of 20&ndash;40% versus OEM pricing for high-volume clinical labs. 
<a href="https://mbpinc.net/contact-us">Contact MBP&nbsp;</a>for per-cup pricing on case-quantity PO orders.

Automation Sample Cups

110610-Group-Analyzer Consumables Catalog

110610-Group-TDS-110811

110610-Group-TDS-110911

110610-Group-TDS-110621

110610-Group-TDS-110610

110610-Group-TDS-110021

110610-Group-TDS-110711

Multi-Purpose Sample Cups Specifications

1.5mL PS Sample Cup

110610 by Globe Scientific is a 1.5 mL clear polystyrene sample cup measuring 13.8 mm x 22.60 mm, supplied 1,000/bag. Compatible with most popular automated clinical chemistry and immunoassay analyzers. Provides excellent optical clarity for photometric detection. Globe Scientific ISO 9001:2015 certified.

Manufacture

Sample Cup, 1.5mL, PS, 1000/Bag, CS/12000

Sample Cup, 2.0mL, PS, 1000/Bag, CS/10000

Sample Cup, 0.5mL, PS, 1000/Bag, CS/10000

Sample Cup, 0.25mL, PS, 1000/Bag, CS/10000

Sample Cup, 4mL, PS, 1000/Bag, CS/5000

Sample Cup, 3mL, PS, for Hitachi Analyzers, 1000/Bag, CS/6000

5106-Analyzer Consumables Catalog

5106-TDS-5106

ABBOTT: Sample Cup, PS, for use with the Abbott Architect Series Analyzers, 5000/CS

Globe Scientific 5106 polystyrene sample cups for Abbott Architect Series Analyzers, packed 5000/CS (2000/bag). Direct equivalent to Abbott OEM part 07C101. Order by SKU 5106 at <a href="https://www.mbpinc.net/quickorder">mbpinc.net/quickorder</a> or email customerservice@mbpinc.net for volume pricing.

5542-Analyzer Consumables Catalog

ABBOTT: Sample Cup, for use with the Abbott AxSYM & Architect analyzers, 500/Bag, 2 Bags/Unit

5542 by Globe Scientific is a polystyrene sample cup (17.5 mm × 53 mm) designed for Abbott AxSYM® and Architect® clinical chemistry analyzers. Supplied 500/bag, 2 bags/unit (1,000 total), it is an OEM-equivalent replacement for high-volume clinical labs. Order at <a href="https://mbpinc.net/quickorder">mbpinc.net/quickorder</a> using catalog number 5542.

5545-Analyzer Consumables Catalog

ACE: Sample Cup, for use with the Schiapparelli ACE analyzer, 1000/Bag

5545 by Globe Scientific — 0.5 mL polypropylene sample cup (10mm &times; 22mm) for Alfa Wassermann&reg; ACE and Gilford&reg; clinical chemistry analyzers. Non-sterile, 1000/bag.

5535-Analyzer Consumables Catalog

ATAC: Sample Cup, for use with the Atac 8000 analyzer, BAG/1000

5535 by Globe Scientific is a clear polystyrene sample cup for the Elan® ATAC® 8000 automated analyzer, supplied in bags of 1,000. A cost-effective OEM-equivalent replacement for high-volume clinical labs. Order at <a href="https://mbpinc.net/quickorder">mbpinc.net/quickorder</a> using catalog number 5535.

5541-Analyzer Consumables Catalog

5541-TDS-5541

BECKMAN: Sample Cup, 0.5mL, for use with Beckman CX series analyzers

5541 by Globe Scientific is a 0.5 mL polystyrene sample cup for Beckman Coulter CX® series clinical chemistry analyzers, also compatible with Access®, Synchron®, and Vi-Cell® platforms. Supplied 1,000/bag as a cost-effective OEM-equivalent replacement. Order at <a href="https://mbpinc.net/quickorder">mbpinc.net/quickorder</a> using catalog number 5541.

5536-Analyzer Consumables Catalog

5536-TDS-5536

BECKMAN: Sample Cup, 2mL, for use with Beckman CX series analyzers, BAG/1000

5536 by Globe Scientific — 2 mL clear polystyrene sample cups for Beckman CX Series, Access, Synchron, and Vi-Cell analyzers. Sold in bags of 1,000. A cost-effective OEM alternative available from MBP Inc. with worldwide shipping.

113132-113133-Analyzer Consumables Catalog

Caps for Sample Cups

113132 by Globe Scientific is a polyethylene (PE) snap cap for Globe multi-purpose sample cups 110610, 110021, 110711, and 110621. The solid-top design snaps firmly in place to contain specimens during collection and transport. Sold in bags of 1000, suited to high-throughput drug testing and clinical specimen workflows.

Cap, Snap, PE, for Sample Cups: 110610, 110021, 110711 & 110621, BAG/1000

Cap, Snap, PE, with Pierceable Cross Cut, for Sample Cups: 110021, 110610, 110621 & 110711, BAG/1000

5504-Group-Analyzer Consumables Catalog

5504-Group-TDS-5505

5504-Group-TDS-5504

Nesting Sample Cups

5504 by Globe Scientific is a 1 mL clear polystyrene nesting sample cup that inserts into 12 mm and 13 mm primary tubes, allowing analyzer probe aspiration without re-labelling. Supplied 1,000/bag for clinical chemistry and coagulation lab workflows. For 16 mm tubes, use 5505 (2 mL). Order at <a href="https://mbpinc.net/quickorder">mbpinc.net/quickorder</a>.

Sample Cup, Nesting, PS, 1mL (for 12mm & 13mm tubes), 10000/Cs

Sample Cup, Nesting, PS, 2mL (for 16mm tubes), 8000/Cs

5531-Analyzer Consumables Catalog

SYSMEX: Sample Cup, 2mL, for use with Sysmex CA Series analyzers, BAG/1000

5531 by Globe Scientific is a 2 mL clear polystyrene sample cup for Sysmex® CA 50, 500, 1000, 1500, and 5000 coagulation analyzers. A cost-effective OEM-equivalent replacement supplied in bags of 1,000 for high-volume clinical coagulation labs. Order at <a href="https://mbpinc.net/quickorder">mbpinc.net/quickorder</a> using catalog number 5531.

6500-Group-Analyzer Consumables Catalog

Sample Cup with Cap for Cobas Mira, Bio, Fara and Horiba ABX analyzers

6500 by Globe Scientific is a non-sterile polyethylene sample cup with an attached snap cap, available in five colors, designed as a direct-replacement consumable for Cobas Mira®, Bio®, Fara®, and Horiba ABX® clinical chemistry analyzers. Sold in bags of 1,000, these cups support high-throughput clinical lab workflows and color-coded sample tracking programs.

HORIBA ABX: Sample Cup with Cap for Cobas Mira, Bio, Fara and Horiba ABX analyzers, Blue, CS/12000

HORIBA ABX: Sample Cup with Cap for Cobas Mira, Bio, Fara and Horiba ABX analyzers, Clear, CS/12000

HORIBA ABX: Sample Cup with Cap for Cobas Mira, Bio, Fara and Horiba ABX analyzers, Green, CS/12000

HORIBA ABX: Sample Cup with Cap for Cobas Mira, Bio, Fara and Horiba ABX analyzers, Red, CS/12000

HORIBA ABX: Sample Cup with Cap for Cobas Mira, Bio, Fara and Horiba ABX analzyers, Yellow, CS/12000

110913-Analyzer Consumables Catalog

110913-TDS-110913

Sample Cup, 3mL, PS, for Tosoh 360 and AIA-600 II, 1000/Bag, CS/5000

110913 by Globe Scientific is a 3 mL polystyrene sample cup dimensionally validated for the Tosoh 360 and AIA-600 II immunoassay analyzers. Non-sterile, single-use. Supplied 1,000 cups/bag; CS/5,000 per case.

United States

Texas

mbpinc