Light Sensitive Film

<h2 dir="ltr">What are light-sensitive sealing films?</h2>
 Light-sensitive sealing films are light-blocking microplate seals &mdash; typically aluminum foil or opaque pigmented polymer &mdash; used to protect photosensitive contents from light exposure during incubation, detection, and storage. They prevent the photobleaching of fluorophores and the photodegradation of light-labile reagents and drugs, while still stopping evaporation and well-to-well contamination. Foil versions also block gases and tolerate &minus;80 &deg;C storage, and several are pierceable for robotic access. Buy from this category whenever a sample's signal or stability depends on keeping light out of the wells.
&nbsp;
<h2 dir="ltr">What you will find: </h2>
<ul>
<li dir="ltr" aria-level="1">
Black opaque sealing films for full light protection
</li>
<li dir="ltr" aria-level="1">
Semi-opaque light-reducing films for controlled exposure workflows
</li>
<li dir="ltr" aria-level="1">
Standard formats for 96-well microplates (approx. 127 &times; 80 mm)
</li>
<li dir="ltr" aria-level="1">
384-well compatible sealing films for high-throughput assays
</li>
<li dir="ltr" aria-level="1">
Adhesive sealing films for secure microplate closure
</li>
<li dir="ltr" aria-level="1">
Optical-compatible films for fluorescence-based assays
</li>
<li dir="ltr" aria-level="1">
Pierceable and non-pierceable film options for workflow flexibility
</li>
<li dir="ltr" aria-level="1">
High-barrier films for evaporation and contamination control
</li>
</ul>
<h2 dir="ltr"> How to choose light-sensitive films</h2>
&nbsp;
Confirm full light-blocking Choose fully opaque foil or pigmented film, not tinted clear film, when contents are strongly photosensitive; foil blocks light completely, while pigmented polymer films balance light protection with easier handling.
Decide whether you still need optical access Light-sensitive films are not for reading through; if a protocol requires both light protection and optical detection, seal for storage with an opaque film and switch to an optical film at the read step.
Check temperature and storage rating Foil light-blocking films often double as cold storage seals rated to &minus;80 &deg;C, suiting light-sensitive compound libraries; confirm the stated range before archiving frozen samples.
<h2 dir="ltr"> Compare light-sensitive film variants.</h2>
&nbsp;
<ul>
<li data-section-id="17gvbe2" data-start="0" data-end="165">Opaque aluminum foil: Provides maximum light blocking and supports &minus;80 &deg;C storage; compatible with storage and polypropylene plates, as well as robotic probes.</li>
<li data-section-id="1jnkzrj" data-start="167" data-end="335">Pierceable foil: For photosensitive high-throughput screening (HTS) and automated sample access; compatible with polypropylene plates and liquid handling systems.</li>
<li data-section-id="1o0gauf" data-start="337" data-end="479" data-is-last-node="">Black/amber polymer film: For light-sensitive applications requiring easier benchtop handling; compatible with assay and culture plates.</li>
</ul>
<h2 dir="ltr"> Specifications context</h2>
 Light-sensitive films are characterized by opacity, temperature range, and whether they are pierceable. Aluminum foil offers complete light blocking plus a gas and moisture barrier, and often carries a &minus;80 &deg;C to +110 &deg;C rating for combined light protection and freezer storage. Pigmented polymer films are easier to handle for benchtop work. Because a conformable foil presses down into each well, it leaves a defined impression around every well that lets the user confirm a complete seal by eye, and the opaque, intact layer doubles as a tamper-evident and contamination barrier while plates move between the bench, incubator, and freezer. Because these films are not optically clear, they are removed before any fluorescence or absorbance read. As of 2026, they ship in packs of 100 or rolls in a low-to-mid price tier.&nbsp; 
&nbsp;
Instead of struggling with inconsistent results, choose a sealing solution designed specifically for light-sensitive work. <a href="https://mbpinc.net/contact-us">Connect with the MBP team</a> to find the right film format, compatibility, and bulk supply option for your application.

AbsorbMax™, Fluorescence assays, light sensitive sample protection, -40°C to +80°C, 50 Sealing Films/Pack

AbsorbMax™ (BK-50) by MBP is a black vinyl plate seal for fluorescence assays and light-sensitive sample protection. Opaque black film applicable to either the top or bottom of the plate. Blocks ambient light to protect photosensitive samples and reduce background fluorescence. 50 films/pack, &minus;40&deg;C to +80&deg;C. Ships ambient.

Application

Temperature Range

Manufacturer

AlumaSeal®

AlumaSeal® by MBP is an easy-to-pierce aluminum foil plate seal rated &minus;80&deg;C to +120&deg;C — the widest temperature range in the MBP plate seal lineup. Secure seal, opaque barrier for light-sensitive samples. Available in 384-well CR (F-384-100) and 96-well (F-96-100) formats, 100 films/pack each. Ships ambient.

AlumaSeal 384™, CR, long-term storage, light sensitive assays and robotics, -80°C to +120°C, 100 Sealing Films/Pack

AlumaSeal 96™, long-term storage, light sensitive assays and robotics, -80°C to +120°C,100 Sealing Films/Pack

BrightMax™, Luminescence, fluorescence and microscopy, -40°C to +80°C, 50 Sealing Films/Pack

BrightMax™ (WT-50) by MBP is a white, light-reflecting vinyl plate seal for luminescence, fluorescence, and microscopy. Uniquely applicable to either the top or bottom of the plate — bottom application reflects and amplifies signal. 50 films/pack, rated &minus;40&deg;C to +80&deg;C. Ships ambient; single SKU.

FoilSeal™, PCR

FoilSeal™ PCR (F2-100) by MBP is an aluminum foil plate sealing film rated &minus;20&deg;C to +120&deg;C for PCR, qPCR, light-sensitive assays, and robotics. Minimizes evaporation and cross-contamination. Available non-sterile (F2-100, 100 films) or sterile (F2S-50, 50 films). Ships ambient.

FoilSeal™, PCR, light sensitive assays and robotics, -20°C to +120°C, 100 Sealing Films/Pack

FoilSeal™, PCR, Sterile, light sensitive assays and robotics, -20°C to +120°C, 50 Sealing Films/Pack

eXTReme™ FoilSeal™

eXTReme™ FoilSeal™ (XTR-FOIL-100) by MBP is an aluminum foil plate seal with excellent chemical resistance and superior performance in ultra-low temperatures. Listed for long-term storage, light sensitive assays, and robotics. &minus;80&deg;C to +120&deg;C, 100 films/pack. Standard (XTR-FOIL-100) and large (XTR-FOILLG-100) formats. Ships ambient.