Pipettors & Controllers

<h2 dir="ltr"> What Are Pipettor Accessories?</h2>
 Pipettor accessories are complementary tools and parts that support correct storage, calibration, maintenance, and identification of laboratory pipettors. Pipettors stored lying flat on a benchtop risk contaminating the nose cone and suffer tip ejector wear; vertical stand storage is the manufacturer-recommended practice for all brands. At a minimum, every lab needs a pipette stand to prevent bench contamination and a calibration tool to verify ISO 8655 accuracy without sending instruments out.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Pipette stands for secure pipettor storage
</li>
<li dir="ltr" aria-level="1">
Carousel pipette holders for easy multi-instrument access
</li>
<li dir="ltr" aria-level="1">
Pipettor calibration tools for accuracy checks
</li>
<li dir="ltr" aria-level="1">
Pipette tip racks and refill systems
</li>
<li dir="ltr" aria-level="1">
Pipette filter replacement accessories
</li>
<li dir="ltr" aria-level="1">
Pipettor cleaning and maintenance tools
</li>
<li dir="ltr" aria-level="1">
Pipette workstation organizers
</li>
</ul>
<h2 dir="ltr"> Key Pipettor Accessory Categories</h2>
 Pipette Stands and Carousel Racks Single-position vertical stands store one pipette upright, protecting the nose cone from surface contact. Six-position carousel stands rotate 360&deg; and hold 6 pipettors of mixed sizes &mdash; the standard for a molecular biology bench set covering P2, P10, P20, P200, P1000, and P5000. Universal-format carousels (Eppendorf, Gilson, Rainin, Biohit, Thermo) accommodate most standard pipette body diameters; manufacturer-specific stands provide a precision fit. Wall-mount holder systems save bench space in smaller workspaces. In-Lab Calibration Tools Gravimetric calibration of a pipettor requires only a calibrated analytical balance (0.0001 g resolution), distilled water, and a calibration tool specific to the pipettor model for adjusting the piston stop. Manufacturer calibration kits (e.g., Gilson Pipetman Calibration Kit, Eppendorf calibration tool) allow in-lab ISO 8655 verification without sending pipettors to an external service. ISO 17025-accredited external calibration services (Gilson, Eppendorf, Rainin) issue certified calibration reports for GLP and regulatory compliance. O-Ring and Seal Service Kits Worn O-rings and seals are the most common cause of pipettor inaccuracy and tip leakage after physical damage. Service kits specific to each pipettor model (Gilson PIPETMAN service kit, Eppendorf Research Plus service kit) include O-rings, seals, and small springs for routine preventive maintenance. Gilson recommends preventive maintenance every 1&ndash;2 years or whenever calibration verification fails. Colour-Coding Rings Colour-coded silicone rings clip onto pipette barrels for quick volume identification, user assignment, or pre/post-PCR segregation in shared labs. Eppendorf ColorTag rings are available in 12 colours and 6 sizes compatible with all Eppendorf pipette models; universal-format rings fit most major brands. Charger Stands for Electronic Pipettors Electronic pipettors (Eppendorf Research Pro, Rainin Pipet-Lite XLS+) require charger stands or base docks for overnight charging. Charger stands also serve as storage; the Eppendorf Charger Stand 2 holds and charges a single electronic model on the bench. 
<h2 dir="ltr"> Specifications Context</h2>
 Pipettor stands should be used per all major manufacturer guidelines &mdash; Eppendorf, Gilson, and Rainin all specify vertical storage as the correct position to prevent liquid ingress into the piston. ISO 8655 calibration requires distilled water at 20&deg;C, a balance with 0.0001 g resolution, and a minimum of 10 dispenses per volume setting. Eppendorf ColorTag rings are available in 6 sizes covering pipettes from 2 &micro;L to 5,000 &micro;L.&nbsp; Eppendorf, Gilson, and Rainin offer both in-lab calibration tools and ISO 17025-certified external calibration services.&nbsp; 
Is your workstation as organized as your research? Don&rsquo;t wait for a pipette to fall or a seal to fail. <a href="https://mbpinc.net/contact-us" style="color: #236fa1;">Connect with the MBP team</a> today to stock up on the essentials that keep your lab running like clockwork.

Pipettor Accessories

Pipettors Accessories

Biologix® Levo ME Pipette Filler with AC Adapter North-America Plug 1 Piece/Case

BIOLOGIX LEVO ME PIPETTE FILLER. THE LEVO PLUS IS COMPATABLE WITH GLASS OR PLASTIC PIPETTES AND FEATURES AN AC ADAPTOR. PRICE/EACH

Biologix Levo ME Pipette Filler with AC Adapter North-America Plug 1 Piece/Case\n

Biologix® Electronic Pipettors, MicroPette Levo Plus Pipette Filler, 0.1~100ml, 1 Pcs/Case

BIOLOGIX LEVO PLUS PIPETTE FILLER. THE LEVO PLUS IS COMPATABLE WITH GLASS OR PLASTIC PIPETTES AND FEATURES AN AC ADAPTOR. PRICE/EACH

Biologix Electronic Pipettors, MicroPette Levo Plus Pipette Filler, 0.1~100ml, 1 Pcs/Case

<h2 dir="ltr">What Are Multi-Channel Pipettors?</h2>
 A multi-channel pipettor contains 8 or 12 piston-tip cone assemblies arranged in a single row at 9 mm centre-to-centre spacing &mdash; matching the well spacing of standard 96-well plates &mdash; allowing an operator to simultaneously dispense into an entire plate row (12-channel) or column (8-channel) with a single plunger depression. This reduces the time to fill a 96-well plate from ~96 individual dispenses to 12 (8-channel) or 8 (12-channel). For 384-well plates, 16-channel models or adjustable-spacing multichannel pipettors accommodate the 4.5 mm inter-well spacing. Multi-channel pipettors are the standard instrument for ELISA plate loading, serial dilution across 96-well plates, PCR master-mix dispensing, and cell-based assay setup. An 8-channel pipettor fills a 96-well plate in 12 strokes; a 12-channel pipettor fills it in 8 &mdash; choose based on whether your workflow is row-based or column-based.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
8-channel adjustable volume multi-channel pipettors
</li>
<li dir="ltr" aria-level="1">
12-channel high-throughput pipettors
</li>
<li dir="ltr" aria-level="1">
Mechanical multi-channel pipettors for routine use
</li>
<li dir="ltr" aria-level="1">
Autoclavable multi-channel pipettors
</li>
<li dir="ltr" aria-level="1">
Ergonomic lightweight pipettors for extended use
</li>
<li dir="ltr" aria-level="1">
Calibrated precision multi-channel pipettors
</li>
<li dir="ltr" aria-level="1">
Microplate-compatible pipettors for 96-well formats
</li>
</ul>
<h2 dir="ltr"> How to Choose a Multi-Channel Pipettor</h2>
 8-Channel vs 12-Channel 8-channel pipettors (8 rows) are used when working column-by-column across a 96-well plate &mdash; the standard for PCR setup, ELISA, and serial dilutions where samples run down columns. 12-channel pipettors (12 columns) are used when filling row-by-row, common for reagent dispensing from reservoirs across all 12 columns simultaneously. Both configurations dispense the same 96 wells per plate but in different orientations. Volume Range Common multi-channel volume ranges: 0.5&ndash;10 &micro;L (for low-volume PCR or sequencing), 5&ndash;50 &micro;L, 10&ndash;100 &micro;L, and 20&ndash;200 &micro;L (the most widely used range for ELISA and cell-based assays), and 30&ndash;300 &micro;L. Select the range that places your most frequent dispense volume at 50&ndash;80% of the maximum for best accuracy. Manual vs Electronic Manual multi-channel pipettors (Eppendorf Research Plus Multichannel, Gilson PIPETMAN Multichannel) require no battery and are field-calibratable. Electronic multi-channel pipettors (Eppendorf Xplorer Multichannel, Rainin Pipet-Lite L8 LTS Electronic) add programmable speed, multi-dispense mode, and reduced plunger force &mdash; particularly valuable for high-throughput plate workflows. Tip Compatibility Multi-channel pipettors use the same tip collar geometry as single-channel models: standard conical for Eppendorf Research Plus and Gilson PIPETMAN (universal-fit 8-strip tips); LTS cylindrical for Rainin L8/L12 LTS (LTS 8-strip tips). Confirm tip format matches the multichannel instrument before ordering tip strips. Adjustable Tip Spacing Eppendorf Research Plus Move It and equivalent adjustable-spacing models allow spacing between channels to be set to 4, 6, 8, or 12 mm &mdash; enabling use with 24-well, 48-well, and 384-well plate formats without a dedicated instrument for each format. 
<h2 dir="ltr"> Specifications Context</h2>
 Multi-channel pipettors are subject to ISO 8655 Part 6 (multichannel piston-operated volumetric instruments). Standard accuracy specification for a 200 &micro;L 8-channel model is &plusmn;1.5 &micro;L systematic error; inter-channel CV should be &le;1.0% to ensure well-to-well reproducibility in plate-based assays. Autoclavable lower sections are standard on Eppendorf Research Plus and Gilson PIPETMAN multichannel models. Eppendorf Research Plus Multichannel and Rainin Pipet-Lite L8/L12 LTS remain the dominant manual multichannel platforms in North American research labs.&nbsp; 
&nbsp;
Tired of the one-well-at-a-time grind? Let&rsquo;s speed things up.<a href="https://mbpinc.net/contact-us" style="color: #236fa1;">&nbsp;Reach out to the MBP team</a> today for a quote on the multi-channel system that fits your lab&rsquo;s pace.

Multi-Channel Pipettors

Micropipettes

BIOLOGIX MICROPETTE PLUS 8 CHANNEL MECHANICAL PIPETTES

Biologix® MicroPette Plus Pipettes 8-Channel, 1 Piece/Case

Brand

Model

Volume Range

BIOLOGIX MICROPETTE PLUS 8 CHANNEL MECHANICAL PIPETTES. MICROPETTE PLUS FEATURES EIGHT-CHANNEL ADJUSTABLE VOLUME IN 0.1UL INCREMENTS RANGING FROM 0.5-10UL. PRICE/EACH

BIOLOGIX MICROPETTE PLUS 8 CHANNEL MECHANICAL PIPETTES. MICROPETTE PLUS FEATURES EIGHT-CHANNEL ADJUSTABLE VOLUME IN 0.5UL INCREMENTS RANGING FROM 5-50UL. PRICE/EACH

BIOLOGIX MICROPETTE PLUS 8 CHANNEL MECHANICAL PIPETTES. MICROPETTE PLUS FEATURES EIGHT-CHANNEL ADJUSTABLE VOLUME IN 0.5UL INCREMENTS RANGING FROM 50-300ΜL. PRICE/EACH

BIOLOGIX PIPETTE STAND. PIPETTE STAND HOLD UP TO 6 PIPETTES IN A LINEAR POSITION. PRICE/CASE

Biologix Laboratory Pipette Stand, 1 Piece/Case\n