Benchmark Scientific

Microplate Reader Accessories

<h2>What Are Microplate Reader Accessories?</h2>
&nbsp;
Microplate reader accessories are supplementary components that extend detection range, maintain instrument performance, and support compliance in regulated workflows. They fall into four groups: optical accessories (filters, filter cubes, and polarizers for wavelength selection in fluorescence and absorbance detection); illumination accessories (replacement xenon flash lamps, deuterium lamps, or LED upgrade modules that provide the excitation light source); calibration and validation tools (absorbance validation plates with certified reference values, fluorescence uniformity plates, and luminescence performance standards used to verify reader performance); and automation and software accessories (reagent injectors for kinetic luminescence assays, plate stackers for unattended batch reading, and software module licenses for 21 CFR Part 11 compliance, spectral scanning, or advanced kinetics). Because accessory designs are manufacturer-specific, a filter block designed for one plate reader brand will not fit another; always order accessories using the instrument's model number as the primary specification parameter. Filter sets are the most commonly needed accessory for multi-mode readers; confirm the filter block format and thread size for your specific reader model before ordering, as filter cube dimensions vary significantly between manufacturers and generations.
&nbsp;
<h2 dir="ltr">What you will find: </h2>
<ul>
<li data-section-id="23xybn" data-start="25" data-end="117">Replacement filters and optical accessories for maintaining microplate reader performance.</li>
<li data-section-id="71w1ic" data-start="118" data-end="209">Calibration and validation tools to support accurate and reproducible assay measurements.</li>
<li data-section-id="6jcbpl" data-start="210" data-end="312">Microplates and consumables compatible with absorbance, fluorescence, and luminescence applications.</li>
<li data-section-id="y9aam2" data-start="313" data-end="396">Replacement components and maintenance accessories for routine instrument upkeep.</li>
<li data-section-id="qoq7y7" data-start="397" data-end="523" data-is-last-node="">Accessories designed to support ELISA, cell-based assays, nucleic acid quantification, and other microplate-based workflows.</li>
</ul>
&nbsp;
<h2>How to Choose Microplate Reader Accessories</h2>
&nbsp;
Filter sets for fluorescence and absorbance.
Fluorescence filter sets (excitation filter, dichroic mirror, emission filter) must match both the fluorophore's excitation and emission spectra and the filter cube housing format of the specific reader. Most microplate reader filters use standard 25 mm diameter circular filters; some readers use 12 mm micro-filters. Common fluorescence filter sets: FITC/SYBR Green (Ex 485/12 nm, Em 520/10 nm); DAPI/Hoechst (Ex 360/40 nm, Em 460/40 nm); TRITC/PI (Ex 544/10 nm, Em 620/10 nm); Cy5 (Ex 620/10 nm, Em 680/10 nm). For absorbance, filter-based readers require individual narrow-bandpass filters at the wavelengths required by each assay protocol: 450 nm for ELISA, 595 nm for Bradford, 562 nm for BCA, 260 nm, and 280 nm for nucleic acid and protein.
Replacement lamps
Xenon flash lamps are the standard excitation source in high-quality fluorescence and absorbance microplate readers; typical lamp lifetime is 500 million flashes (approximately 3 to 5 years of daily use). Lamp output decreases gradually before failure; rising CV% in repeated measurements of the same standard is the first sign of lamp degradation. Replacement xenon flash lamps are model-specific; confirm part number from the instrument manual before ordering. Some instrument manufacturers have transitioned to LED-based excitation sources, which have much longer lifetimes (50,000+ hours) and do not require routine lamp replacement.
Calibration and validation plates
Calibration plates contain certified optical standards (neutral density filters, fluorescent reference dyes at known concentrations, or luminescent reference materials) in an SBS-format plate footprint for installation in the plate carriage. They are used to verify photometric accuracy, linearity, and inter-well uniformity (CV% across all 96 or 384 wells). These verifications are required in ISO 17025 accredited labs and GLP/GMP environments, and recommended as best practice for any lab relying on quantitative plate reader data. Validation plates are model-specific and must be re-certified periodically (typically annually) by the manufacturer.
Reagent injectors
Reagent injectors are syringe-pump accessories that dispense a defined volume of reagent into each well of a microplate immediately before or during reading, required for luminescence kinetic assays (luciferase, beta-galactosidase, flash luminescence from coelenterazine), where the signal decays rapidly after reagent addition. Single injectors add one reagent (e.g., luciferase substrate); dual injectors allow sequential addition of two reagents for sequential flash and glow luminescence detection. Injectors are model-specific and must be installed and calibrated by the manufacturer or a qualified service engineer.
Plate stackers and automation accessories
Plate stacker modules load and unload microplates automatically from a tray of 10 to 50 plates, allowing unattended overnight batch reading. Integration with laboratory robotics and LIMS extends this to fully automated plate reading workflows. Plate stackers are model-specific and typically sold as separate accessories from the reader. Confirm that the plate stacker is compatible with the specific plate type (96-well standard, 384-well, with or without sealing film) and the plate loading orientation.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Filter bandpass width (the FWHM of the filter transmission curve) affects sensitivity and selectivity. Narrower bandpass filters (10 nm FWHM) improve selectivity by excluding off-target fluorophore emission but transmit less light, reducing signal. Wider bandpass filters (20 to 40 nm) transmit more light for a brighter signal, but may allow bleed-through from closely overlapping fluorophores. In multiplex assays with two or more fluorophores, narrow bandpass emission filters reduce spectral cross-talk between channels. Optical density (OD) of the blocking region outside the transmission band should be at least OD 5 to OD 6 for fluorescence filters to prevent light leakage from the excitation source from reaching the detector.
&nbsp;
To discuss product availability or get selection guidance,&nbsp;<a href="https://mbpinc.net/contact-us">contact the MBP team</a>.

Microplate Brochure

Wash bottle assembly (1 bottle with cap and tubing)

MW9600-WSHB by Accuris Instruments is an extra wash bottle assembly (1 bottle + cap + tubing) for the SmartWasher™96 Microplate Washer (MW9600 / MW9600-E). The auto-rinse function primes the dispensing tube and wash heads on installation, preventing cross-contamination and clogging when switching between wash reagents. Use as a direct replacement or as a dedicated second-channel buffer bottle in multi-buffer ELISA washing protocols.

Manufacture

Waste bottle assembly (1 bottle with cap and tubing)

The MW9600-WSTB by Accuris Instruments is a replacement waste bottle assembly (1 bottle with cap and tubing) for the SmartWasher96 microplate washer (MW9600 and MW9600-E). Keeps a spare on hand to eliminate downtime when the integrated waste-level sensor signals a full bottle during ELISA or cell-based plate washing.

Microcentrifuge Accessories

<h2>What Are Microcentrifuge Accessories?</h2>
&nbsp;
Microcentrifuge accessories maintain performance, extend tube-format versatility, and ensure safe operation of benchtop microcentrifuges. These include replacement fixed-angle rotors for 12&ndash;24 &times; 1.5/2.0 mL tube positions, tube adapters for 0.5 mL and 0.2 mL formats, aerosol-tight sealed rotor lids for biocontainment of infectious specimens, balance tubes for partial-load runs, and specialty rotors for PCR strips or 5.0 mL tubes where supported by the centrifuge model. All microcentrifuge accessories are model-specific, as rotor coupling systems and tube bore dimensions differ between manufacturers and even between models within the same brand, making exact model verification essential before ordering.
&nbsp;
<h2>What You Will Find:</h2>
&nbsp;
<ul>
<li>High-quality adapters and rotors for precise and reliable tube fit</li>
<li>Multiple formats including PCR strips, microtubes, plates, and spin columns</li>
<li>Specialized and high-capacity rotors for enhanced compatibility</li>
<li>Swing-out and sealed options for reliable and contamination-free processing</li>
</ul>
&nbsp;
<h2>How to Choose Microcentrifuge Accessories</h2>
&nbsp;
Replacement Rotor Identification
The rotor model number is typically printed on the rotor body or listed in the centrifuge user manual. Cross-reference it with the manufacturer's accessory catalog to confirm that the coupling system matches the centrifuge motor shaft. For standard 12-position rotors, verify compatibility with both 1.5 mL and 2.0 mL microtubes.
Tube Adapter Sizing
For 0.5 mL adapters, ensure the outer diameter closely matches the rotor bore so the tube remains secure during operation. For 0.2 mL adapters, confirm that PCR tubes are positioned correctly to achieve the intended centrifugal force while maintaining stability throughout the run.
Aerosol-Tight Sealed Lids
Choose sealed lids rated for the rotor's maximum operating RCF. O-rings should be inspected regularly for flattening, cracking, or discoloration and replaced immediately if any signs of wear appear. Maintaining replacement O-rings for frequently used lids helps ensure continued safe operation.
Specialty Rotors
Some microcentrifuge models support optional rotors for 5.0 mL tubes, PCR strips, or microplates. These accessories expand workflow flexibility but may operate at lower maximum RCF values than standard 1.5 mL rotors. Always verify the rated speed and force limits before use.
Balance Tubes
Balance tubes help maintain proper rotor balance during partial-load runs. They should closely match the mass and dimensions of the sample tubes being processed. Proper balancing reduces vibration, minimizes bearing wear, and supports long-term centrifuge performance.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Many modern fixed-angle rotors and polypropylene adapters are autoclavable, although specific sterilization requirements vary by manufacturer and material. Always follow the OEM maintenance and decontamination guidelines for each accessory. Rotor service life is generally determined by cumulative operating hours and manufacturer recommendations rather than visual appearance alone.
Sealed rotor lid systems with one-touch release mechanisms have become standard in modern molecular diagnostic laboratories, providing improved safety, easier maintenance, and enhanced biocontainment for regulated workflows.
Stop wasting time searching. The best microcentrifuge accessories are right here at MBP Products. <a href="https://mbpinc.net/contact-us">Connect with our expert team</a> to get your equipment accessories today.

Work Station Rack for 50 x 5ml tubes

C1005-T5-RK2 by Benchmark Scientific is a latex-free workstation rack holding 50 × 5 ml centrifuge tubes, designed as an accessory for the Benchmark myFuge™ 5 (C1005) microcentrifuge. The rack stages a full 50-tube batch run at the centrifuge for organised loading, unloading, and post-spin sample handling. Order using catalog number C1005-T5-RK2 at <a href="https://www.mbpinc.net/quickorder">mbpinc.net/quickorder</a> or contact <a href="mailto:customerservice@mbpinc.net">customerservice@mbpinc.net</a>.

Dry Baths

<h2>What Are Dry Bath Incubators?</h2>
&nbsp;
A dry bath incubator uses direct thermal conduction from a heated aluminum block to sample tubes placed in precision-machined well inserts, rather than immersing samples in a liquid medium. This eliminates water bath contamination risks from microbial biofilms, cross-contamination between samples from water droplets, and the mineral scale buildup associated with tap water. Aluminum blocks heat rapidly: most models reach 37 degrees C from ambient in 3-5 minutes and 100 degrees C in approximately 10-15 minutes, providing faster protocol transitions than water baths for multi-temperature workflows. Interchangeable aluminum well insert blocks are machined to fit specific tube formats with tight tolerances (typically plus or minus 0.1 mm), maximizing thermal contact between the block wall and tube exterior for efficient and uniform heat transfer. Choose dry bath incubators over water baths when contamination prevention is critical, when multiple setpoint temperatures are needed in rapid succession, or when protocols require temperatures above 70 degrees C, where evaporation from water baths is significant.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<a href="https://mbpinc.net/equipments/temperature-control-equipment/temperature-controlled-baths/dry-baths/dry-baths-accessories" title="Dry Baths Accessories">Dry Baths Accessories</a>
<ul>
<li dir="ltr" role="presentation">High-conductivity interchangeable heating blocks designed to accommodate microtubes, PCR strips, and centrifuge tubes for maximum versatility.</li>
<li dir="ltr" role="presentation">Specialized block lifters and thermal covers that ensure safe handling and improved temperature insulation during high-heat protocols.</li>
<li dir="ltr" role="presentation">Precision-fit modular inserts engineered for seamless heat transfer, allowing you to customize your heating station for any vessel size.</li>
</ul>
&nbsp;
<h2>How to Choose a Dry Bath Incubator</h2>
&nbsp;
Number of blocks and block capacity
Single-block dry baths hold one aluminum insert block and typically accept 8-24 wells, depending on tube size, occupying minimal bench space. Dual-block models accept two independently controlled blocks simultaneously (see Dual Baths), enabling two temperatures in one footprint. Four-block configurations (such as Labnet DB-04A) hold four blocks with a broad temperature range up to 150 degrees C, suitable for high-throughput labs processing multiple protocols simultaneously. Confirm well count per block for your primary tube format before purchasing.
Temperature range
Standard dry bath incubators cover ambient plus 5 degrees C to 100 degrees C, sufficient for most molecular biology protocols (37 degrees C incubation, 55-60 degrees C Proteinase K digestion, 70 degrees C inactivation, 95 degrees C DNA denaturation). Extended-range models reach 120-160 degrees C for applications such as paraffin embedding at 60-65 degrees C, wax melting, electrophoresis gel denaturation, and COD (chemical oxygen demand) digestion at 150 degrees C. Models with Peltier cooling blocks extend the lower range to -10 to -30 degrees C for sub-ambient incubations.
Temperature accuracy and uniformity
Block temperature accuracy (deviation from the true temperature at setpoint) is typically plus or minus 0.2-0.5 degrees C at 37 degrees C for microprocessor PID-controlled units; the Biolab dry bath incubator 1306 series specifies plus or minus 0.3 degrees C stability and or minus 0.3 degrees C block uniformity at 100 degrees C. Block uniformity describes the temperature variation between different wells in the same insert at the same setpoint, a critical specification when running comparative assays where all samples must be at identical temperatures.
Heated lid
An adjustable heated lid positions a temperature-controlled surface directly above the tube caps during incubation, preventing condensation of volatile samples on the cooler upper portions of the tube and the cap. Heated lids are essential for enzyme reactions, isothermal amplification (LAMP), immunoassay incubations, and any protocol where evaporation or condensation affects sample concentration or reaction outcome. Models like the Labnet PR1MA Mini with Heated Lid allow independent temperature setting of the lid to optimize anti-condensation heating without overheating the sample.
Programmable timer and multi-cycle function
Programmable dry baths with a built-in timer (up to 99 hours and 59 minutes on most models) allow unattended protocol completion with automatic shutoff. Multi-cycle function (up to 99 repetitions) enables automated ramp-hold-repeat cycles for denaturation-renaturation experiments, isothermal nucleic acid amplification protocols, and temperature cycling without a PCR thermocycler for simple two-step protocols. Auto-restart after power failure is standard on research-grade models.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
A 150 W heating element in a single-block dry bath achieves temperature equilibration from 25 degrees C to 100 degrees C in 10 minutes or less, compared to 15-25 minutes for a 12-20 L water bath at comparable setpoints. Block temperature uniformity of plus or minus 0.3 degrees C across all wells is standard for research-grade dry bath incubators; economy models may specify plus or minus 1 degree C block uniformity, which is insufficient for quantitative assays comparing samples run in different wells. Dry bath incubators operating at 95-100 degrees C require minimal maintenance compared to water baths: no water changes, no algae treatment, no mineral descaling, making them operationally lower-cost for high-temperature molecular biology protocols. Dry bath incubators with heated lids, dual LED displays (showing actual and setpoint temperatures simultaneously), and programmable multi-cycle timers are the standard specification for new molecular biology lab installations, replacing older dry block heaters.&nbsp;
&nbsp;
Ready to upgrade your sample heating setup? Explore our full range of dry baths and <a href="https://mbpinc.net/contact-us">contact the MBP team</a> for a quote today.

Product Literature

Quick-Flip™ Block, Side one holds: 24 x 1.5ml tubes, or 32 x 0.2ml and 14 x 0.5ml tubes, Side two holds: 6 x PCR strips, 48 x 0.2ml or one PCR plate

Block, 24 x 1.5ml centrifuge tubes (conical)

Block, 24 x 1.5ml or 2.0ml centrifuge tubes

Block, 20 x 10mm test tubes or 20 x 2.0ml centrifuge tubes

Block, 12 x 15mm or 16mm test tubes (or 12 x 10ml)

Block, 48 x 0.2ml tubes or 6 PCR strips of 8 tubes each

Block, 1 x 96-well PCR plate (myBlock II only)

Block, 1 x Micro Titer Plate (myBlock II only)

Solid Block (for slides or custom machining)

Block, 48 X hematocrit tubes, 1.9mm (not compatible with cover)

myBlock™ Digital Dry Baths Series Accessories

myBlock™& isoBlock Digital DryBaths

BSH500 by Benchmark Scientific — the myBlock&#8482; and isoBlock Digital Dry Bath series — provides microprocessor-controlled incubation from ambient +5°C to 105°C in single-chamber (myBlock I), dual-chamber (myBlock II), and independently dual-zone (isoBlock) configurations. Quick-Flip interchangeable blocks support 0.2&nbsp;ml to 50&nbsp;ml tube formats; a removable hinged lid minimizes evaporation for extended runs.

Temperature Range

Temperature Accuracy

Temperature Uniformity

Temperature Increments

Timer

Dimensions (Single)

Dimensions (Dual)

Weight

Warranty

Electrical

myBlock l™ - digital dry bath, single chamber, without blocks, 115V

myBlock l™- digital dry bath, single chamber, without blocks, 230V

myBlock ll™- digital dry bath, dual chamber, without blocks, 115V

myBlock ll™- digital dry bath, dual chamber, without blocks, 230V

myBlock l™- digital dry bath with 1 Quick-Flip blocks (BSWCMB) for tubes (0.2 to 2.0ml, PCR strips and PCR plates, 115V

myBlock l™- digital dry bath with 1 Quick-Flip blocks (BSWCMB) for tubes (0.2 to 2.0ml, PCR strips and PCR plates 230V

myBlock ll™- digital dry bath with 2 Quick-Flip blocks (BSWCMB) for tubes (0.2 to 2.0ml, PCR strips and PCR plates, 115V

myBlock ll™- digital dry bath with 2 Quick-Flip blocks (BSWCMB) for tubes (0.2 to 2.0ml, PCR strips and PCR plates, 230V

isoBlock™ - digital dry bath, with two independently controlled chambers, without blocks, 115V

isoBlock™ -digital dry bath, with two independently controlled chambers, without blocks, 230V

Minicentrifuge

<h2>What Are Minicentrifuges?</h2>
&nbsp;
Minicentrifuges (personal centrifuges or pulse centrifuges) are compact lid-activated benchtop instruments that spin at a fixed speed of approximately 6,000 RPM (2,000 &times;g) for quick spin-down tasks: collecting condensate from microtube caps, concentrating PCR tube contents to the bottom before thermal cycling, briefly clarifying samples after vortexing, and pelleting small-volume precipitates in 0.2 mL, 0.5 mL, 1.5 mL, and 2.0 mL tube formats. Most models include two rotors&mdash;one for 1.5/2.0 mL microtubes with 0.5 mL adapters, and one for 0.2 mL PCR tubes and 8-strip PCR strips&mdash;in a compact benchtop footprint. Lid closure starts the rotor, and lid opening stops it within seconds. The minicentrifuge is a daily-use instrument in molecular biology laboratories performing PCR, RT-PCR, qPCR, cloning, and NGS workflows.
&nbsp;
<h2>What You Will Find:</h2>
&nbsp;
<ul>
<li>BLUline Mini Centrifuges: Compact units for routine microcentrifuge tube applications</li>
<li>BLUline PCR Plate Centrifuge: Designed for rapid PCR plate spin-downs</li>
<li>Globe Scientific Mini Centrifuge: Efficient fixed-speed units for everyday sample processing</li>
<li>myFuge&trade; 12 MiniCentrifuge: Higher sample capacity with a 12-place rotor</li>
<li>myFuge&trade; Digital Mini Centrifuge: Digital controls with combination rotor functionality</li>
<li>StripSpin&trade; Digital Mini Centrifuge: Optimized for PCR strips and plates</li>
<li>Mini Centrifuge: Compact solution for basic laboratory applications</li>
<li>Mini Plate Spinner Centrifuge: Ideal for quick microplate spin-downs</li>
<li>DLAB Mini Centrifuge: Flexible systems with multiple rotors and adapters</li>
<li>Mini Centrifuge Accessories: Rotors and adapters for different tube sizes and laboratory workflows</li>
</ul>
&nbsp;
<h2>How to Choose a Minicentrifuge</h2>
&nbsp;
Fixed Speed vs. Variable Speed
Standard minicentrifuges operate at a fixed speed of approximately 6,000 RPM. Some models offer variable-speed operation, typically between 2,000 and 10,000 RPM, providing additional flexibility for laboratories that occasionally require higher centrifugal force without investing in a full-size microcentrifuge.
Rotor Compatibility and PCR Strip Support
Confirm that both common rotor types are included: a rotor for 1.5/2.0 mL microtubes with 0.5 mL adapters and a rotor for 0.2 mL PCR tubes and PCR strip tubes. Laboratories performing high-throughput PCR or NGS workflows should ensure PCR strips fit securely and can be loaded without additional adapters.
Tool-Free Rotor Exchange
Models with tool-free rotor exchange systems allow users to switch between microtube and PCR rotors quickly without requiring tools. This feature is particularly useful in busy laboratories where rotor changes occur frequently throughout the day.
Portable and Battery Operation
Some minicentrifuges support battery operation in addition to standard AC power. These models are suitable for field sampling, point-of-care testing, mobile diagnostic applications, and environments where power outlets may not be readily available. Verify voltage compatibility and power requirements before purchase.
Noise Level
Most minicentrifuges operate at noise levels of approximately 45 dB or lower, making them suitable for shared laboratory spaces and benchtop use near workstations. Check manufacturer specifications if low-noise operation is a priority.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
At 6,000 RPM with a typical rotor radius of 39&ndash;42 mm, a standard minicentrifuge generates approximately 1,700&ndash;2,000 &times;g. This is sufficient for condensate collection, quick sample spin-downs, and concentrating PCR reaction contents but is not suitable for applications requiring higher centrifugal force such as spin-column nucleic acid purification, bacterial pelleting, or protein precipitation workflows.
Most minicentrifuges weigh less than 1.5 kg and occupy minimal bench space, making them suitable for crowded laboratory environments, PCR workstations, and biosafety cabinet work areas. Modern models emphasize ease of use through lid-activated operation, compact footprints, quiet performance, and rapid rotor exchange systems.
Your search for a premium-quality minicentrifuge ends here. <a href="https://mbpinc.net/contact-us">Contact the expert team</a> at Molecular Biology Products Inc. today to find the right solution for your laboratory.

MyFuge™12 Mini Centrifuge 100-240V (US plug) Accessories

myFuge™ 12 MiniCentrifuge (12place)

The C1012 by Benchmark Scientific is a 12-place minicentrifuge spinning at 5,500 rpm (2,000 xg) with a COMBI-Rotor™ that handles 1.5/2.0 ml microtubes, 0.2 ml PCR tubes, and PCR strips — all without swapping rotors. Universal voltage (100–240 V) and lid-activated start/stop make it a compact, low-maintenance option for routine pulse spin-downs on any bench.

Speed

Capacity

Dimensions

MyFuge™12 Mini Centrifuge 100-240V (US plug)

MyFuge™12 Mini Centrifuge 100-240V (European 2 prong plug)

Microcentrifuge

<h2>What Are Microcentrifuges?</h2>
&nbsp;
Microcentrifuges are compact, high-speed benchtop centrifuges designed specifically for 0.2&ndash;2.0 mL microtubes and PCR strips, operating at 10,000&ndash;21,000 &times;g in a fixed-angle rotor. They are the primary centrifugation instrument in molecular biology, biochemistry, and clinical molecular diagnostics labs: nucleic acid pellet formation after ethanol precipitation, spin-column DNA/RNA extraction and PCR cleanup steps (typically specified at 10,000&ndash;16,000 &times;g for 30&ndash;60 seconds), cell debris clearance from lysates, protein precipitation supernatant recovery, and brief sample clarification before downstream analysis. Standard benchtop microcentrifuges reach 14,000&ndash;15,000 RPM (16,000&ndash;21,000 &times;g), while high-speed models reach up to 21,000 RPM and approximately 31,000 &times;g. Refrigerated variants maintain 0&ndash;4&deg;C for temperature-sensitive workflows.
&nbsp;
<h2>What You Will Find:</h2>
&nbsp;
<ul>
<li>High-Speed Microcentrifuges: For faster sample processing</li>
<li>Refrigerated Microcentrifuges: For temperature-sensitive handling</li>
<li>Benchtop Microcentrifuge Systems: For routine lab working</li>
<li>5D Digital Microcentrifuge: With customizable time and speed options</li>
<li>Mini Microcentrifuges: Compact units for rapid spin-down tasks</li>
<li>MC-24 High-Speed Microcentrifuge: Features touch screen control and high speed</li>
<li>Microplate Centrifuges: Developed for PCR plates and strip formats</li>
<li>Microcentrifuge Accessories: For expanded tube flexibility and compatibility</li>
</ul>
&nbsp;
<h2>How to Choose a Microcentrifuge</h2>
&nbsp;
Maximum RCF vs. Protocol Requirements
Most spin-column kit protocols specify 10,000&ndash;16,000 &times;g. A standard microcentrifuge reaching 14,000&ndash;16,000 &times;g covers these requirements. If your lab performs alcohol-precipitation DNA/RNA pelleting (12,000&ndash;16,000 &times;g) or virus concentration steps (20,000+ &times;g), choose a model reaching at least 16,000 &times;g. High-speed models reaching 21,000&ndash;31,000 &times;g are available for specialized applications.
Rotor Tube Positions and Capacity
Most microcentrifuge rotors hold 12&ndash;24 &times; 1.5/2.0 mL tubes per run. Laboratories processing larger batches benefit from 24-position rotors, while smaller research groups may find 12-position models sufficient. Confirm that adapters for 0.5 mL and 0.2 mL tubes are available if required by your workflows.
Refrigerated vs. Ambient Temperature
Refrigerated microcentrifuges are recommended for RNA extraction, protein stability studies, cell viability applications, and any protocol requiring 4&deg;C centrifugation. Standard room-temperature models are suitable for routine DNA extraction and PCR cleanup procedures.
Noise Level and Footprint
Modern brushless DC motor microcentrifuges typically operate at &le;52 dB, making them quieter than older brush-motor systems. Most units occupy 200&ndash;300 mm of bench width, so confirm that sufficient clearance is available when the lid is fully open.
Safety Features
Essential safety features include lid-lock mechanisms, imbalance detection, and over-speed protection. Laboratories handling infectious materials should verify that aerosol-tight sealed rotor lids are available for the selected model.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
The standard spin-column step in most commercial DNA/RNA extraction kits specifies 10,000&ndash;16,000 &times;g for 30&ndash;60 seconds. Always confirm the rotor's maximum RCF from manufacturer specifications, since RPM values alone do not account for differences in rotor radius.
Microcentrifuge rotors are typically fixed-angle designs positioned at approximately 45&deg;, providing efficient pelleting and short sedimentation paths. Aerosol-tight sealed lids allow safe handling of BSL-2 samples and other applications requiring biocontainment. Modern brushless DC motors offer quieter performance, improved speed accuracy, and longer service intervals than legacy brush-motor systems.
Your search for high-performance microcentrifuges is over. <a href="https://mbpinc.net/contact-us">Contact now</a> with the expert team at Molecular Biology Products Inc. and get the right microcentrifuge for your lab today.

MyFuge™12 Plus Digital Mini Centrifuge Accessories

myFuge™ MiniCentrifuges (8 place) with 2 rotors

C1008 by Benchmark Scientific is the MyFuge Mini centrifuge -- a palm-sized 6,000 rpm / 2,000 xg personal microcentrifuge with two included rotors: an 8-position microtube rotor (1.5/2.0 ml, with adapters) and a PCR strip rotor (4 x 8-tube strips). Universal voltage (100-240 V), near-silent motor.

MyFuge™ Mini Centrifuge, blue lid, with 2 rotors, 100-240V (US plug)

MyFuge™ Mini Centrifuge, blue lid, with 2 rotors, 100-240V (EU Plug)

MyFuge™ Mini Centrifuge, clear lid, with 2 rotors, 100-240V (US plug)

MyFuge™ Mini Centrifuge, clear lid, with 2 rotors, 100-240V (EU Plug)

MyFuge™ Mini Centrifuge, green lid, with 2 rotors, 100-240V (US Plug)

MyFuge™ Mini Centrifuge, green lid, with 2 rotors, 100-240V (EU Plug)

MyFuge™ Mini Centrifuge, purple lid, with 2 rotors, 100-240V (US Plug)

MyFuge™ Mini Centrifuge, purple lid, with 2 rotors, 100-240V (EU Plug)

MyFuge™ Mini Centrifuge, red lid, with 2 rotors, 100-240V (US Plug)

MyFuge™ Mini Centrifuge, red lid, with 2 rotors, 100-240V (EU Plug)

Electrophoresis System

User Manual

InstaView™ Electrophoresis System-InstaView Brochure

Extra casting set for 10.5 x 10 cm and 10.5 x 6 cm gels. Includes stand, trays, E1101-COMB1 double-sided combs

Extra double-sided combs, 22/12 teeth, for E1200-CS1 Casting Set, pack of 2

Orange filter cover for mini LED transilluminator

myGel InstaView™ (E1200 and E230) Illuminator Accessories

myGel InstaView Package: E1200 and E2301 touch screen power supply

E1200-PSP by Accuris is the myGel™ InstaView™ Package, bundling the E1200 InstaView™ Gel Tank System (465 nm blue LED in-tank transilluminator, 10.5×10 cm and 10.5×6 cm gel sizes, magnetic safety interlock) with the E2301 MyVolt™ Touch touchscreen power supply. Compatible stains include GelGreen, SYBR Green, and SmartGlow; ethidium bromide is not compatible with the blue LED. 115V; 230V version is E1200-PSP-E.

myGel InstaView Package: E1200 and E2301 touch screen power supply, 230V input

Extra casting set for 10.5x10cm and 10.5x6cm gels. Includes stand, trays, E1101-COMB1 double-sided combs

Extra double-sided combs, 22/12 teeth, for E1200-CS1 Casting Set, pk of 2

myGel InstaView™ Gel Tank with Blue LED Illuminator Accessories

myGel InstaView™ Gel Tank with Blue LED Illuminator

E1200 by Accuris Instruments is the myGel InstaView™ gel electrophoresis tank with an integrated 465 nm blue LED illuminator for real-time, UV-free visualization of GelGreen, SYBR Safe, and SmartGlow-stained DNA gels in the tank. Accommodates large (10.5 × 10 cm) or small (10.5 × 6 cm) tray formats and includes trays, combs, casting stand, imaging enclosure, and an orange filter lid for direct smartphone documentation.

myGel InstaView™ Gel Tank with Blue LED Illuminator, 230V input

Casting set, for 5 x 6cm gels, includes four trays and two combs (18*/10 teeth)

Reversible combs, 18*/10 teeth, for E1101-CS2 casting set, pk 2 (multi-channel compatible)

myGel Mini Electrophoresis System Starter Kit

E1101-SK by Accuris is the myGel Mini Electrophoresis System Starter Kit — the complete E1101 gel tank with power supply, a 100 g mini digital balance, and 100 g of LE agarose in one package. The system runs at 35V, 50V, or 100V, holds 230 mL of buffer, and supports gels up to 10.5 × 6 cm or two 5 × 6 cm gels simultaneously. Available in 115V (North America) and 230V (E1101-SK-E) configurations.

myGel Mini Electrophoresis System Starter Kit (Includes E1101, A1701 and W4000-100)

myGel Mini Electrophoresis System Starter Kit (Includes E1101-E, A1701 and W4000-100)

Datasheet

myGel™ Electrophoresis System

E1101 by Accuris Instruments is the myGel™ Mini electrophoresis system — a complete gel tank, integrated power supply, and two casting sets for 10.5 × 6 cm and 5 × 6 cm gel formats. Selectable voltage output (35/50/100 V), 0–99 min timer, multichannel-compatible combs, and a 0.45 kg / 7.5 × 5.1 in footprint make it suited for personal labs and teaching applications. Contact MBP at customerservice@mbpinc.net for pricing and availability.

Output Voltage

Safety

Max. Buffer (ml)

Gel Capacity

myGel Mini Electrophoresis System

myGel Mini Electrophoresis System 230V (includes transformer)

Incubators

<h2>What Are Laboratory Incubators?</h2>
&nbsp;
A laboratory incubator is an insulated chamber with a regulated internal environment (at a minimum, a controlled temperature) used to grow microbiological cultures, maintain cell lines, and incubate biological samples for experimental or diagnostic purposes. Standard microbiological incubators are heat-only instruments maintaining temperatures from a few degrees above ambient to 60 degrees C to 65 degrees C (some models higher), using forced-air or gravity convection. CO2 incubators add carbon dioxide regulation (typically 5% CO2) and humidity control to support mammalian and human cell culture. Refrigerated incubators (BOD incubators) cool as well as heat, enabling controlled temperatures below ambient for biochemical oxygen demand testing, pharmaceutical stability studies, insect rearing, and seed germination research. Applications span cell biology, microbiology, molecular biology, virology, cancer research, bacteriology, pharmaceutical stability testing, and agricultural research. Choose a microbiological (heat-only) incubator for bacterial culture; choose a CO2 incubator for mammalian cell culture; choose a refrigerated incubator for BOD testing, stability studies, or protocols requiring below-ambient temperatures.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/equipments/temperature-control-equipment/incubators/shaking-incubator" title="Shaking Incubators">Shaking Incubators:</a> combine precise temperature control with steady orbital agitation, making them perfect for liquid cultures and cell growth that requires constant aeration.
</li>
<li dir="ltr" aria-level="1">
<a href="https://mbpinc.net/equipments/temperature-control-equipment/incubators/incubator-accessories" title="Incubator Accessories">Incubator Accessories:</a> include essential add-ons like specialized platforms, flask clamps, and internal shelving to help you customize your space and maximize sample capacity.
</li>
</ul>
&nbsp;
<h2>How to Choose a Laboratory Incubator</h2>
&nbsp;
Incubator type: heat-only vs. CO2 vs. refrigerated
Microbiological incubators (heat-only) are the simplest and lowest-cost option, sufficient for bacterial and yeast culture where atmospheric CO2 and humidity are not controlled parameters. CO2 incubators maintain 5% to 10% CO2 and 90% to 95% humidity, which are required for most mammalian cell culture lines that use bicarbonate-based media. Refrigerated (BOD) incubators heat and cool, covering a range such as 0 degrees C to 70 degrees C, for protocols requiring both sub-ambient and elevated temperature phases in sequence.
Temperature range and stability
Most microbiological incubators cover ambient + 5 degrees C to 65 degrees C; higher-temperature models reach up to 100 degrees C for sterilization validation or drying protocols. Forced-air convection models provide better uniformity across shelves than gravity-convection models, especially in larger chambers. Target stability of plus or minus 0.1 degrees C to plus or minus 0.5 degrees C is typical for research-grade units.
Chamber volume
Chamber volumes range from compact benchtop units (under 30 L) suitable for small sample volumes or overcrowded labs to large-capacity models (200 L to 700 L) for high-throughput culture work. Stackable benchtop models conserve bench space and allow capacity expansion without a single large unit.
CO2 and humidity control (for CO2 incubators)
CO2 incubators use either infrared (IR) sensors or thermal conductivity (TC) sensors to maintain CO2 concentration. IR sensors respond faster to CO2 fluctuations and are more accurate at low concentrations; TC sensors are less expensive but require recalibration after door openings. In-chamber humidity is maintained by a water pan; some models include humidity sensors and active humidity control.
Contamination prevention
Incubator contamination (mold, bacteria) is a significant practical concern. Features that reduce contamination risk include 180 degrees C dry-heat decontamination cycles, copper interiors (antimicrobial), HEPA-filtered air circulation, and stainless steel interior surfaces that are easy to clean. In multi-user facilities, decontamination cycle capability is a key selection criterion.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Temperature uniformity is rated differently by manufacturers: some specify uniformity at a single point (e.g., centre of chamber) while others specify maximum gradient across all shelf positions. For cell culture and virology work where consistency across samples is critical, confirm uniformity specs cover the full chamber volume. Units intended for IND (investigational new drug) work or GMP manufacturing require IQ/OQ/PQ validation support documentation from the manufacturer. Standard research-grade incubators for academic use do not require GMP certification. Review chamber material (stainless steel vs. galvanized), shelf load capacity, and door seal design for compatibility with your sample containers and access requirements.&nbsp;<a href="https://mbpinc.net/equipments/temperature-control-equipment/chillers-and-heaters"></a>
&nbsp;
Ready to find the ideal environment for your research? Explore our incubator collection and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a friendly quote today.

Mini Nutating Rocker, 8 x 6 in. platform, 115V

Mini Nutating Rocker, 8 x 6 in. platform, 230V

myTemp™ Mini Digital Incubators Accessories

myTemp™ Mini Digital Incubators

H2200-H by Benchmark Scientific is the myTemp™ Mini Digital Incubator, a compact 20 L (0.75 cu. ft.) bench-top heating incubator with a temperature range of ambient +1° to 60°C and an accuracy of ±0.5°C at 37°C. Two adjustable shelves accommodate bottles and flasks up to 2 L. Large LED display, universal voltage (100–240 V, 50–60 Hz), 2-year warranty. A heat/cool model (H2200-HC, 15°C below ambient to 60°C) is also available.

Temperature Range (H)

Temp. Range (HC)

Platform Dimensions (H3D1020)

Operating Temp. Range (H3D1020)

MyTemp™ Mini Digital Incubator, with heating only 115V

MyTemp™ Mini Digital Incubator, with heating only 230V

MyTemp™ Mini Digital Incubator, with heating and cooling 115V

MyTemp™ Mini Digital Incubator, with heating and cooling 230V

Electrophoresis System Accessories

myVolt™ Mini power supply

The E2100 myVolt™ Mini by Accuris Instruments is a compact electrophoresis power supply delivering selectable 100V or 200V constant output at up to 200 mA and 40W, with two pairs of banana-plug outputs, a universal 100–240V input, and a footprint of 6.25 × 4.5 × 2.3 inches — weighing just 0.9 lbs.