Benchmark Scientific

Dry Baths Accessories

<h2>What Are Dry Bath Incubator Accessories?</h2>
&nbsp;
Dry bath accessories are the secondary components that extend or optimize the functionality of a dry block heater: aluminum insert blocks that define the tube format capacity; heated lids that eliminate condensation; external temperature reference probes for calibration verification; and carrying and storage cases for portability. Because the aluminum insert block physically determines which tube formats the dry bath can process, insert block selection is the single most impactful purchase decision after the base unit itself. Most manufacturers supply one insert format as standard with the base unit; labs processing multiple tube formats must purchase additional inserts separately. Select accessories based on the tube formats used in your primary protocols, confirming that inserts are brand- and model-compatible before ordering.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Specialized Heating Blocks: High-conductivity aluminum blocks tailored for everything from 0.2ml PCR strips and 1.5ml centrifuge tubes to larger 50ml conical vessels.
</li>
<li dir="ltr" aria-level="1">
Custom &amp; Solid Block Options: Versatile solid blocks suitable for slides or custom machining, alongside blocks specifically drilled for HPLC vials and cuvettes.
</li>
<li dir="ltr" aria-level="1">
Precision Monitoring &amp; Power: External temperature probes for direct sample tracking and 12V vehicle adapters to maintain thermal control during mobile laboratory work.
</li>
</ul>
&nbsp;
<h2>How to Choose Dry Bath Accessories</h2>
&nbsp;
Aluminum insert blocks: format selection
Insert blocks are precision-machined from aluminum to accept specific tube formats with tight well tolerances (typically within plus or minus 0.1 mm of the tube's outer diameter). Common formats include: 24 wells for 0.5 mL tubes; 15-16 wells for 1.5 mL microcentrifuge tubes; 12-15 wells for 2 mL microcentrifuge tubes; 8-strip configuration for 0.2 mL PCR strip tubes; 12 wells for 15 mL conical tubes; 6 wells for 50 mL conical tubes; and a flat surface (no wells) for microplates or irregular vessels. Inserts are not universally interchangeable across brands; confirm the insert fits the specific dry bath model's block holder dimensions and, for models with auto-recognition, that the insert carries the required auto-recognition contact.
Insert material and thermal conductivity.
Aluminum (Al 6061 alloy) is the standard material for dry bath inserts due to its high thermal conductivity (approximately 167 W/m K), low density, and machinability for tight tolerances. Some specialty inserts for aggressive chemical applications use hard-anodized aluminum or stainless steel, with lower thermal conductivity but better chemical resistance. Always use manufacturer-supplied or manufacturer-approved aluminum inserts; after-market inserts with inferior tolerances reduce thermal contact and degrade temperature uniformity.
Heated lid accessories
Heated lid accessories for dry baths are sold separately for many base unit models or as an upgrade kit. When selecting a heated lid, confirm: (1) it fits the specific block footprint and height of your dry bath model; (2) the lid temperature range covers the required anti-condensation temperature (typically 60-110 degrees C); (3) the lid temperature is independently controlled from the block; and (4) the lid surface material is non-reactive with samples. For protein and enzyme protocols, a lid temperature 5-10 degrees C above the block temperature is the typical starting point.
External temperature reference probe
An external calibration probe (typically a thin RTD or thermocouple probe rated for direct insertion into a tube well, connected to a calibrated digital reference thermometer) verifies that the temperature inside the well matches the instrument's displayed setpoint. External probe verification is required for GLP-compliant and regulated laboratory protocols (ISO 9001, CLIA, cGxP) and is good practice annually for any research dry bath. Confirm that the probe diameter fits the insert well format (most probes are 2-5 mm diameter; well diameter varies by tube format) before ordering.
Carrying case for portable dry baths
Mini and portable dry bath models (Labnet PR1MA Mini, and similar) are available with dedicated carrying cases for field applications: point-of-care diagnostics, on-site environmental sampling, and field isothermal PCR or LAMP assays using a 12 V DC automotive power adapter. Carrying cases provide impact protection, secure block holder positioning, and cable management for field use.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Aluminum insert block well tolerances of plus or minus 0.1 mm ensure full circumferential contact between the tube outer wall and the block well, maximizing heat transfer and minimizing temperature gradients between the sample and the block setpoint. A loose-fitting insert with 0.5 mm or more of air gap between tube and well reduces heat transfer and can introduce a temperature lag of 1-3 degrees C compared to the block setpoint, systematically underheating samples. Heated lid accessories eliminate condensation-related volume errors of 5-15% that can occur in short (&lt;10 microliter) enzyme reactions at 37-55 degrees C over 30-60 minute incubations. Auto-recognized interchangeable block inserts (where the dry bath unit automatically detects which format insert is installed) are a standard feature on Labnet and similar mid-range dry bath models, improving setup speed and reducing configuration errors.&nbsp;
&nbsp;
Enhance your dry bath setup today&mdash;check out our full range of blocks and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a quote.

Solid Block. 1.25in/32mm in height

BSH100-01 by Benchmark Scientific is a solid (undrilled) aluminum dry bath block, 1.25 inches (32 mm) tall, for the MyBlock&trade; Mini dry bath (BSH200 / BSH300 series). It ships as a blank block for custom drilling to non-standard tube or vessel dimensions via the BSH100-CU service, or for use as a flat thermal surface in the MyBlock&trade; Mini up to 100&deg;C.

Manufacture

Clinical Centrifuge

<h2>What Are Clinical Centrifuges?</h2>
&nbsp;
Clinical centrifuges separate whole blood into diagnostic components&mdash;serum or plasma, red blood cells, white blood cells, and platelets&mdash;by spinning standard blood collection tubes (5&ndash;50 mL vacutainer formats) at 300&ndash;6,000 RPM (typically 3,000&ndash;3,500 &times;g) for defined cycle times. They are the core specimen-processing instrument in clinical chemistry, hematology, immunology, coagulation, and molecular diagnostic laboratories. Standard serum separation runs at 3,000 &times;g for 10 minutes after a 30-minute clotting period; plasma preparation from anticoagulated tubes runs at 2,000&ndash;3,000 &times;g for 10&ndash;15 minutes. Clinical centrifuges used in CLIA-regulated labs must meet Clinical Laboratory Improvement Amendments performance requirements and be documented for routine calibration and maintenance.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Z207-A Clinical Centrifuge: Compact clinical centrifuge with an 8 x 15 mL rotor for routine sample processing
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Sprint&trade; Clinical Centrifuge (6H): Reliable unit designed for consistent clinical lab applications
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Sprint&trade; 8 Clinical Centrifuge: Fixed-angle rotor centrifuge for efficient sample separation
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Sprint&trade; 6H Plus Clinical Centrifuge: Swing-out rotor centrifuge for improved sample handling
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
DLAB DM0412 Clinical Centrifuge: Complete system with rotor and adapter for versatile lab use
</li>
</ul>
&nbsp;
<h2>How to Choose a Clinical Centrifuge</h2>
&nbsp;
Speed Range and Maximum RCF
Most routine clinical serum and plasma preparation requires 3,000&ndash;3,500 &times;g. Clinical centrifuges with a maximum RCF of 3,500&ndash;6,000 &times;g cover all standard blood tube protocols and allow headroom for gel separator tube requirements, which vary by manufacturer. Platelet-poor plasma preparation requires up to 10,000 &times;g, making higher-speed models appropriate for coagulation laboratories.
Rotor Type: Swing-Out vs. Fixed-Angle
Swing-out rotors produce a horizontal sediment layer perpendicular to the tube wall, simplifying serum and plasma aspiration while reducing red blood cell carryover into the supernatant. Fixed-angle rotors pellet at higher RCF per RPM and are faster for pelleting applications, although the diagonal sediment interface is less convenient for aspiration. Swing-out rotors are commonly preferred for routine blood tube processing, while fixed-angle models are often selected for higher-throughput workflows.
Tube Capacity and Format
Clinical centrifuge rotors typically hold 6&ndash;24 blood collection tube positions per run. Confirm that the rotor accommodates your required tube dimensions, including 13 mm OD tubes for 5&ndash;7 mL samples and 16 mm OD tubes for 10 mL samples, and verify adapter availability for 15 mL and 50 mL conical tubes when needed.
Refrigerated vs. Room Temperature
Refrigerated models operating between 2&ndash;8&deg;C are commonly used for coagulation factors, complement panels, cryoglobulin testing, and research specimens where analyte stability is temperature-sensitive. Room-temperature centrifuges are generally sufficient for routine chemistry and immunology workflows completed within standard processing times.
Programmable Acceleration and Deceleration
Adjustable acceleration and deceleration profiles help prevent gel barrier displacement in serum separator tubes and preserve platelet and buffy coat layers in specialized protocols. Manufacturers of gel separator tubes often specify both maximum RCF and acceleration limits, making programmable controls beneficial in high-throughput environments.
CLIA and CAP Compliance
Maintain documentation for centrifuge model numbers, serial numbers, rotor identification, and calibration verification schedules. Many laboratory quality programs include periodic speed verification using a calibrated tachometer, with records retained to support audit and accreditation requirements.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Serum separation at 3,000 &times;g for 10 minutes is a commonly referenced protocol for routine chemistry and immunology testing. Gel separator tube manufacturers, including BD Vacutainer, Greiner, and Sarstedt, publish recommended RCF ranges to support proper gel barrier migration and minimize sample rejection due to displacement. Laboratory protocols should follow the specific recommendations provided for each tube type.
RCF is calculated using the formula RCF = 1.118 &times; 10&minus;5&nbsp;&times; r &times; N2, where&nbsp;r&nbsp;is the rotor radius in millimeters and&nbsp;N is RPM. Rotor-specific calculations provide more accurate results than generic RPM conversion tables. Modern clinical centrifuges commonly feature brushless DC motors, offering quieter operation, reduced maintenance requirements, and extended service life, along with programmable acceleration and deceleration settings to support sensitive specimen processing.
Ready to upgrade your lab's performance? <a href="https://mbpinc.net/contact-us">Contact with the expert team</a> at Molecular Biology Products and find the best clinical centrifuge for your lab today.&nbsp;

Product Literature

Adapter pack for C3303-6HP, for 5ml and 7ml (12-13mm) tubes in 15ml rotors, 8/pk

12 x 15ml fixed angle rotor for Sprint™  6H Plus

Sprint™ 6H Plus Clinical Centrifuge with 6 x 15ml swing out rotor Accessories

Sprint™ 6H Plus Clinical Centrifuge with 6 x 15ml swing out rotor

C3303-6HP by Benchmark Scientific is the Sprint 6H Plus clinical centrifuge with a 6-position swing-out rotor for blood tubes up to 15 ml, 4,000 rpm / 2,504 xg max, backlit LCD, adjustable accel/decel, 20 sec-99 min timer, and imbalance detection. 115V and 230V variants available.

Speed

Capacity

Speed increment

Timer

Momentary

Dimensions

Weight

Electrical

Warranty

Sprint™ 6H Plus Clinical Centrifuge with 6 x 15ml swing out rotor, 115V

Sprint™ 6H Plus Clinical Centrifuge with 6 x 15ml swing out rotor, 230V

Adapter pack for C5000-6H and C5000-8, for 5ml and 7ml (12-13mm) tubes, 8/pk

Sprint™ 8 Clinical Centrifuge, with 8 x 15ml fixed rotor Accessories

Sprint™ 8 Clinical Centrifuge with fixed angle rotor

The Sprint™ 8 Clinical Centrifuge (C5000-8) by Benchmark Scientific runs at a fixed 3,400 RPM / 1,400 xg and separates serum or plasma from whole blood in 2–3 minutes. The 8-position fixed-angle rotor holds 15 ml conical and round-bottom tubes; the compact 21-lb unit (12 × 16 in footprint) is designed for clinical chemistry, coagulation, urinalysis, and point-of-care labs.

Sprint™ 8 Clinical Centrifuge with 8 x 15ml fixed angle rotor, 115V

Sprint™ 8 Clinical Centrifuge with 8 x 15ml fixed angle rotor, 230V

Sprint™ 8 Portable kit, 115V

Sprint™ 8 Portable kit, 230V

Adapter pack for C5000-6H and C5000-8, for 5ml and 7ml (12-13mm) tubes, 6/pk

Sprint™ 6H Clinical Centrifuge, with 6 x 10ml swing out rotor Accessories

Sprint™ Clinical Centrifuges

C5000-6H by Benchmark Scientific is the Sprint&trade; 6H clinical centrifuge with a 6-position swing-out rotor reaching 3,400 rpm (1,600 &times; g). Tube capacity is 6 &times; 10 ml standard, or 6 &times; 5/7 ml with the C5000-ADP adapter set. Timer runs 1&ndash;99 minutes; UL Listed; available in 115 V or 230 V.

Sprint™ 6H Clinical Centrifuge with 6 x 10ml swing out rotor, 115V

Sprint™ 6H Clinical Centrifuge with 6 x 10ml swing out rotor, 230V

Sprint™ 6H Portable kit, 115V

Sprint™ 6H Portable kit, 230V

Incubators Accessories

Extra Shelf, stainless steel, for H2505-40

Extra Shelf, stainless steel, for H2505-70

Extra Shelf, stainless steel, for H2505-130

Additional shelf for 45 liter incubators, 1 each

Additional shelf for 180 liter incubators, 1 each

Stacking kit for 180 liter incubator (height of top display approximately 135cm)

IncuView Integrated Microscope Shelf, 45L (For H3565-45 Only)

IncuView Integrated Microscope Shelf, 180L (For H3565-180, 180HD and 180HDO2 Only)

H3550-180-SK by Benchmark Scientific is a stacking kit for 180-liter Benchmark Scientific incubators (ST-180 / SureTemp 180 L series), enabling two 180 L units to be stacked vertically to double incubation capacity without additional floor footprint. The top display sits at approximately 135 cm when stacked. Sold separately from the incubators.

Stacking kit for 45 liter incubator

H3550-45-SK by Benchmark Scientific is a stacking kit that securely stacks two SureTherm™ 45-liter CO2 incubators (H3550-45 or H3565-45) vertically to double cell culture capacity within the same floor footprint. At 1 in tall and 3 lbs, it adds negligible height while providing proper alignment and load distribution between stacked units. An essential space-saving accessory for expanding CO2 incubation capacity in labs with limited bench or floor space.

2D Rockers Accessories

<h2>What are 2D rocker accessories?</h2>
&nbsp;
2D rocker accessories are the non-slip mats, container clamps, tray organizers, and platform protection sheets that complement a 2D rocking platform for daily use with flat gel boxes, blot containers, and staining dishes. Unlike orbital shaker or tube rotator accessories that must be engineered for centrifugal force retention, 2D rocker accessories primarily address the simpler problem of keeping containers from sliding off a gently tilting platform surface. Non-slip rubber or silicone mats hold containers by friction; container clamps with spring clips grip the sides of blot boxes at higher rocking speeds; and protective mats shield the rocker platform from chemical spills from gel stains or hazardous blotting reagents.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" style="font-family: arial, helvetica, sans-serif;" aria-level="1">
A stacking platform with flat mat adds 3.5" clearance:&nbsp;&nbsp;for taller vessels on compatible 2D rockers, provide stable sample placement during rocking.
</li>
</ul>
&nbsp;
<h2>How to choose 2D rocker accessories</h2>
&nbsp;
Start with a non-slip mat for all routine blot and gel applications
A non-slip silicone or rubber mat placed on the 2D rocker platform surface prevents gel boxes, blot containers, and staining dishes from sliding during rocking, particularly as the tilt increases. The mat also provides a layer of chemical protection between spilled staining reagents and the rocker platform surface.
Use container clamps for larger or heavier containers at faster speeds
At rocking speeds above approximately 25&ndash;30 rpm or with larger, heavier gel staining dishes filled with destaining solution, friction alone may be insufficient to prevent sliding, and platform clamps that grip the container edges provide positive mechanical retention regardless of the speed or tilt angle.
Consider a tray divider or multiple smaller mats for running several containers
When running multiple blot containers simultaneously on a single platform, tray dividers or separate small non-slip mats for each container help organize and stabilize each container independently, preventing them from sliding into each other during rocking and ensuring each container's contents are evenly agitated.
Check platform mat dimensions match your rocker platform area
Non-slip mats are sized to fit specific platform dimensions and should not overhang the platform edges, since an overhanging mat can fold or shift during rocking and cause containers placed on it to tilt unevenly. Confirm the mat dimensions against your rocker platform dimensions before purchase.
Protect the platform surface from gel stains and corrosive reagents
Ethidium bromide, SYBR stains, Coomassie Blue, and some membrane stripping reagents can damage or stain the platform surface if spilled directly on it. A protective platform mat acts as a sacrificial barrier, absorbing spills and protecting the instrument surface, and can be cleaned or replaced when contaminated.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Non-slip platform mats for 2D rockers are typically made from silicone or natural rubber and are chemically resistant to most aqueous biological reagents, ethanol, and common blotting buffers, though concentrated organic solvents, strong acids, or bleach may degrade certain mat materials. As of 2026, silicone non-slip mats cut to standard rocker platform dimensions are the most widely used 2D rocker accessory in molecular biology labs, combining chemical resistance, non-slip surface texture, and ease of cleaning in a low-cost consumable format.
<a href="https://mbpinc.net/contact-us">Contact the MBP team</a> today to request a quote and find the right accessories for your 2D rocker.

2D Rocker Accessories

Stacking platform with flat mat with 3.5" clearance

The BR5000-STACK by Benchmark Scientific is the optional stacking platform for the Everlast 247 2D Rocker (BR5000). Adds a second rocking tier with 3.5 inch clearance and a flat autoclavable mat sized for the 16 x 12 inch stainless-steel platform. Doubles work surface for parallel gel blot washing, staining, or sample incubations. Stainless steel construction. Total load across both platforms must not exceed the BR5000's 16 lb maximum.

3D Rockers Accessories

<h2>What are 3D rocker accessories?</h2>
&nbsp;
3D rocker accessories are the interchangeable tube holders, platform mats, and container-retention clips that allow a 3D rocking platform to be used with different vessel types beyond flat trays resting directly on the platform surface. Tube holder accessories fix microcentrifuge, 15 mL, or 50 mL conical tubes in defined positions on the platform, enabling the 3D rocking motion to agitate tube contents without requiring a separate tube rotator. Non-slip platform mats grip trays, gel boxes, and flat containers by friction, preventing them from sliding during rocking. Container clips secure the edges of blot containers or larger trays at higher speeds.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Flat mats (small and large) for flask, plate, and container stable placement&nbsp;</li>
<li dir="ltr" role="presentation">Dimpled mats designed safely hold tubes during mixing</li>
<li dir="ltr" role="presentation">Stacking platforms with flat or dimpled mats to increase space for working area</li>
<li dir="ltr" role="presentation">Platform options with different clearances provide flexibility in multiple setups</li>
<li dir="ltr" role="presentation">Additional platform separators provide more vertical capacity</li>
<li dir="ltr" role="presentation">Packs for securing bigger and irregular lab vessels</li>
<li dir="ltr" role="presentation">Small and large platform sizes to match different models of rockers</li>
<li dir="ltr" role="presentation">Interchangeable accessories for personalized mixing configurations</li>
</ul>
&nbsp;
<h2>How to choose 3D rocker accessories</h2>
&nbsp;
Match tube holder accessories to your tube size and the rocker model
Tube holders for 3D rockers are designed for specific tube formats &mdash; microcentrifuge (1.5 mL and 2 mL), 15 mL conical, and 50 mL conical &mdash; and attach to the platform via a platform-specific mounting system. Confirm that the tube holder accessory is listed as compatible with your specific 3D rocker model, since mounting systems vary between manufacturers.
Use a non-slip mat for flat containers at low to moderate rocking speeds
A non-slip silicone or rubber platform mat holds flat trays and gel boxes by friction at rocking speeds up to approximately 20&ndash;25 rpm, suitable for most blot and gel incubation applications. At higher speeds or steeper tilt angles, the tray may slide despite the mat, and dedicated container clips provide more secure retention.
Choose container clips or tray holders for heavier or larger containers
For large gel staining dishes or containers with significant weight or liquid volume that might slide on the platform, dedicated container clips or tray holder frames that attach to the platform edges provide secure retention at any rocking speed. These are important when working with larger format blots or multiple staining trays simultaneously.
Consider a multi-format accessory kit for maximum versatility
A set covering a non-slip mat, microcentrifuge tube holder, and 50 mL conical tube holder allows the same 3D rocker to serve flat-surface and tube-mixing applications without separate orders per format, and is the standard starting accessory purchase for a new 3D rocker installation.
Verify material compatibility with your lab cleaning agents
Platform mats and tube holders are typically made from polypropylene, silicone, or polyurethane, and should be compatible with your lab disinfectants. Silicone mats resist common lab disinfectants; check materials for compatibility with bleach-based or solvent-based cleaning protocols used.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Tube holders for 3D rocking platforms must secure tubes against centrifugal and gravitational forces during the tilting cycle, and the holder's design determines the maximum safe rocking speed. As of 2026, universal tube holders fitting multiple formats from a single base mount have become available, reducing the number of separate accessories needed for labs mixing different tube sizes on the same 3D rocker.
<a href="https://mbpinc.net/contact-us">Contact the MBP team today </a>to request a quote and find the right accessories for your 3D rocker.

3D Rocker Accessories

Stacking platform, large 12"x12" with dimpled mat (3.0" separation)

The BR1000-STACK-D by Benchmark Scientific is a 12 x 12 in. stacking platform with dimpled rubber mat, adding a second rocking tier to BenchBlotter, BenchRocker 2D, and BlotBoy 3D systems. Dimpled mat pattern grips round-bottom tubes during agitation. Vertical clearance approximately 3.0 in. - VERIFY against current Benchmark documentation before specifying to end users.

Stacking platform, large 12"x12" with flat mat (3.0" separation)

BR1000-STACK by Benchmark Scientific is a 12&quot; &times; 12&quot; flat-mat stacking platform for the BenchBlotter&trade; BR1000 2D rocker, adding a second work level with 3.0 inches of vertical clearance. It doubles the BR1000&apos;s usable rocking area within the same footprint, accommodating two blotting trays, staining boxes, or tube racks simultaneously within the instrument&apos;s 5 lb load limit.

Stacking platform, small 10.5"x7.5" with dimpled mat (3.0" separation)

The B3D-STACK-D by Benchmark Scientific is a 10.5 x 7.5 inch stacking platform with autoclavable dimpled mat for Mini BlotBoy 3D Rocker (B3D1008) and compatible Benchmark small-platform 3D instruments. Adds a second working tier at approximately 2.75-3.0 inch clearance. Dimpled surface grips tubes. For flat-vessel applications, use B3D-STACK (flat mat variant).

Stacking platform, small 10.5"x7.5" with flat mat (3.0"separation)

B3D-STACK by Benchmark Scientific -- small stacking platform (10.5" x 7.5") with flat mat and 3.0" vertical separation for the Mini BlotBoy 3D Rocker (B3D1008) and compatible Benchmark 3D rockers. Doubles rocking capacity without adding bench footprint. Choose B3D-STACK-D for the dimpled mat variant.

Homogenizer Accessories

<h2>What are homogenizer accessories?</h2>
&nbsp;
Homogenizer accessories are the interchangeable tools, replacement parts, and supporting vessels and hardware that enable a laboratory homogenizer to be used across different sample volumes, sample types, and processing conditions beyond what the base instrument alone provides. For rotor-stator homogenizers, the critical accessories are the generator head and dispersing tool (the probe tip with rotating blade inside a stator tube), available in different sizes to match different sample volumes. For ultrasonic probe homogenizers, the primary accessories are the sonic probe tip or microtip, which is the consumable component that transmits ultrasonic energy and eventually wears or fatigues. Additional accessories include cleaning stations, jacketed vessels for temperature control, and support stands.
&nbsp;
<h2>What you will find:</h2>
&nbsp;
<ul>
<li>Rotor-stator homogenizer generator probes</li>
<li>Rotor-stator homogenizer probe tips and microtips</li>
<li>Bead kit and bead grinding media for bead mill homogenizers</li>
<li>Sample tube adapters and holders for homogenizers</li>
<li>Stands, clamp attachments, and supports</li>
<li>Cup horns and flow cells for ultrasonic homogenizers</li>
<li>Sound chamber enclosures for noisy ultrasonic homogenizers</li>
<li>Seals and other replaceable homogenizer parts </li>
</ul>
&nbsp;
<h2>How to choose homogenizer accessories</h2>
&nbsp;
Match the generator head size to your sample volume
Rotor-stator generator heads (dispersing elements) are designed for specific volume ranges: the S10N generator head suits 0.5&ndash;30 mL, S18N suits 5&ndash;150 mL, and S25N suits 50&ndash;500 mL volumes in common IKA Ultra-Turrax style instruments. Processing a 2 mL sample with a large S25N head gives poor energy density; processing 200 mL
Check ultrasonic probe tip diameter against the sample vessel and volume
Ultrasonic probe homogenizer tips are available in standard (12.7&ndash;19 mm) and micro (3&ndash;6 mm) diameters, with the micro-tip providing higher acoustic intensity for small volumes and the standard tip covering larger volumes. The tip diameter should be approximately 1/4 to 1/3 of the diameter of the sample container for effective cavitation throughout the sample.
Replace ultrasonic probe tips before pitting becomes severe
Ultrasonic probe tips erode at the vibrating face through cavitation, and a pitted tip delivers less energy, generates metal particles contaminating the sample, and risks mechanical failure. Inspect the tip face regularly for pitting and replace at the first signs of significant erosion to maintain energy delivery.
Use a water-jacketed vessel for temperature-sensitive samples
Water-jacketed homogenization vessels circulate cold water around the sample vessel during homogenization, limiting the temperature rise in the sample from frictional and ultrasonic heating. This is particularly important for enzyme preparations, RNA isolation, and other applications where sample heating above a few degrees above ambient can cause degradation.
Invest in a probe cleaning station for high-throughput work
Probe cleaning stations hold cleaning and rinse solutions in sequence for rapid cleaning between samples, reducing cleaning time and ensuring consistent decontamination in labs processing many samples per session compared with manual cleaning.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Ultrasonic probe tip replacement is a consumable cost, with tip lifespan typically 50&ndash;200 hours before pitting degrades performance. Manufacturers specify replacement tip models compatible with each horn assembly; non-specified tips risk poor energy coupling or damage. Titanium alloy probe tips remain the standard material for their combination of acoustic properties, corrosion resistance, and fatigue resistance under repeated ultrasonic cycling.
<a href="https://mbpinc.net/contact-us">Contact us to receive a quotation</a> on our homogenizer accessories from our expert staff at Molecular Biology Products Inc.

Stand for D1000

D1000-ST by Benchmark Scientific — adjustable-height steel benchtop stand for the D1000 Handheld Homogenizer. Secures the instrument for hands-free operation across a range of vessel sizes; sturdy base prevents tipping. D1000 homogenizer sold separately