Benchmark Scientific

Shaking Incubator Accessories

<h2>What Are Shaking Incubator Accessories?</h2>
&nbsp;
Shaking incubator accessories are platform attachments and replacement components that secure culture vessels to the shaking deck, expand the range of vessel types a single incubator can accommodate, and maintain safe operation at high agitation speeds. The primary accessories are flask clamps (spring-type or magnetic-attachment systems) for Erlenmeyer flasks of specific volumes, tube racks for culture tubes and centrifuge tubes, microplate holders for 24-well, 96-well, and deep-well plate formats, universal platforms with non-slip surfaces for various container types, and adhesive mats for securing irregularly shaped vessels. Accessories are not universally interchangeable: platform slot patterns, clamp arm geometry, and attachment mechanisms vary by manufacturer and model, so confirm compatibility with the specific shaking incubator before ordering. Always match the flask clamp size to the exact flask volume in use; undersized clamps allow movement that damages cultures, and oversized clamps do not seat correctly in platform slots.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">MultiTherm Touch blocks offer specialized holders for cryotubes, PCR plates, and centrifuge tubes up to 5ml.</li>
<li dir="ltr" role="presentation">Microplate blocks provide secure, uniform agitation for standard and deep-well 96-well plates.</li>
<li dir="ltr" role="presentation">Universal spring platforms offer a flexible solution for holding various bottle and flask sizes on a single surface.</li>
<li dir="ltr" role="presentation">Precision tube adapters allow you to mix 0.2ml to 2.0ml tubes with perfect stability and heat transfer.</li>
<li dir="ltr" role="presentation">Stainless steel shelves help you maximize your incubator&rsquo;s internal capacity for static or upright samples.</li>
</ul>
&nbsp;
<h2>How to Choose Shaking Incubator Accessories</h2>
&nbsp;
Flask clamp size and type
Flask clamps are specified by flask volume: 50 mL, 125 mL, 250 mL, 500 mL, 1 L, and 2 L are the standard sizes. One-piece stainless steel clamp construction is preferable to spot-welded or riveted designs for durability at high agitation speeds. For flasks 2 L and above, clamps with a secondary girdle ring provide additional security during prolonged shaking at 200 rpm or above. Magnetic clamp systems (such as MAGic Clamp-style designs) allow tool-free, rapid exchange between flask sizes without loosening bolts.
Tube racks
Tube racks for shaking incubators accommodate standard 10 mL, 14 mL, 17 mL, 50 mL, and culture tube formats, slotted into the platform deck. Adjustable tube racks that fit multiple tube diameters offer more flexibility than fixed-diameter designs. Confirm the number of tube positions and whether the rack base fits the specific platform slot pattern of your incubator.
Microplate holders
Microplate holders secure 96-well, 24-well, deep-well (2 mL per well), and skirted PCR plate formats to the shaking platform. Platforms designed for microplates typically operate at smaller orbit sizes (19 mm) and higher speeds (up to 400 rpm) compared to flask platforms. Confirm that the holder is rated for the plate format and the speed required by your protocol.
Universal platforms and adhesive mats
Universal platforms with rubber-coated surfaces provide a non-slip base for tissue culture flasks (T-25, T-75), Petri dishes, staining trays, and containers that do not fit standard clamps. Adhesive mats function similarly and are useful for microcentrifuge tube arrays or multiple small containers. Replace adhesive mats periodically as tackiness degrades with repeated use and autoclaving.
Platform compatibility
Before purchasing accessories, identify the platform slot pattern (tab-and-slot vs. screw-mount vs. magnetic) specific to your shaking incubator model. Accessories from the same manufacturer as the incubator are the safest choice; third-party platforms may fit universal tab-and-slot patterns, but should be verified before high-speed use.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Stainless steel flask clamps are the preferred material for autoclavability and chemical resistance. Verify whether accessories can be autoclaved at 121 degrees C; not all rubber or plastic components on tube racks and mats withstand repeated steam sterilization. The load capacity of the platform (in kg per position) limits the total mass of vessel plus culture volume that can be safely agitated; exceeding this limit at high speed stresses the drive bearings. For heavy-use labs running continuous 24-hour shaking protocols, select clamps with single-piece construction and check the drive belt or brushless motor specifications for continuous-duty cycle ratings.&nbsp;
&nbsp;
Ready to optimize your incubator&rsquo;s capacity? Browse our accessories collection and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a friendly quote today.

Optional CO2 gas regulator

The H2300-REG by Benchmark Scientific is a CO2 gas regulator accessory for the H2300-HC2 MyTemp Mini CO2 benchtop incubator. It regulates cylinder pressure down to incubator-safe inlet pressure and is required when connecting to a bottled CO2 supply without an existing line regulator. Available from MBP Inc. for cell culture labs across the USA and Canada.

Manufacture

Vortex Mixers Accessories

<h2>What are vortex mixer accessories?</h2>
&nbsp;
Vortex mixer accessories are the interchangeable cup heads, foam inserts, and platform adapters that convert a standard single-tube vortex mixer to batch-process multiple tubes or different vessel formats simultaneously. The standard single-tube cup head can be replaced with a multi-tube foam insert holding 6 to 24 microcentrifuge tubes, a tube strip or microplate adapter, or a platform-style attachment for larger vessel formats. These accessories are typically instrument-specific, using a proprietary attachment mechanism that varies between vortex mixer brands.&nbsp;
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Tube racks for 0.5 ml, 1.5/2.0 ml, 12 mm, 13 mm, and 15 ml tubes</li>
<li dir="ltr" role="presentation">High-capacity tube racks for holding up to 96 samples</li>
<li dir="ltr" role="presentation">Horizontal heads for mixing 2 &times; 50 ml tubes and 4 &times; 15 ml tubes</li>
<li dir="ltr" role="presentation">Foam tube holders for 6 mm, 10 mm, 12 mm, and 16 mm tubes</li>
</ul>
&nbsp;
<h2>How to choose vortex mixer accessories</h2>
&nbsp;
Select foam inserts by the tube format they accommodate
Foam inserts for vortex mixers are sized to hold specific tube formats by pressing the closed tube caps into the foam at defined positions: standard microcentrifuge inserts hold 1.5 mL and 2 mL tubes, larger foam blocks accommodate 15 mL and 50 mL conical tubes, and low-profile inserts hold 0.5 mL tubes or PCR strip tubes in defined arrays. Check that the insert format matches the tube types you use most and that the insert is rated for your vortex mixer's speed range.
Confirm accessory compatibility with your vortex mixer model
Vortex mixer accessories attach via model-specific connectors &mdash; threaded onto the drive spindle or clipped onto the instrument head &mdash; and are not universally compatible between brands or models. Always check that the specific accessory is listed as compatible with your vortex mixer model before ordering.
Use a microplate adapter for 96-well plate mixing
Microplate vortex adapters replace the standard cup head with a flat or recessed platform sized to hold a standard 96-well plate, allowing entire plates to be mixed in continuous mode for ELISA plate washing steps, microplate cell resuspension, and plate-format biochemical assays. The adapter should be rated for the speed at which it will be used to prevent plate sliding.
Check that foam insert speed ratings are compatible with your operating speed
Foam inserts are rated for a maximum operating speed, and using a foam insert at speeds above its rating risks tubes not being securely retained by the foam compression at high rpm. Confirm that the insert's rated speed covers your intended operating speed before batch-processing valuable samples.
Consider a universal platform adapter for flexible use
Some vortex mixer manufacturers offer a universal platform adapter that replaces the cup head with a flat non-slip platform, accepting a wide range of vessel formats using a non-slip mat for retention. While less format-specific than a dedicated foam insert, a universal platform provides flexibility for less common vessel formats.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Foam inserts work by compressing foam around tube caps to provide frictional retention during high-speed oscillation; foam material and cell size determine tube sizes accommodated and maximum safe speed. As of 2026, inserts accommodating PCR strip tubes alongside microcentrifuge tubes in a single insert have become available, reducing the number of separate formats needed.
<a href="https://mbpinc.net/contact-us">Contact the MBP team</a> today to request a quote and find the right accessories for your vortex mixer.

Vortex Mixer Accessories

Optional Foam Rack for 5 x 50 ml tubes (BV1003 model only)

BV1003-T500 by Benchmark Scientific is an optional foam rack attachment for the BenchMixer V2 BV1003 vortex mixer, enabling simultaneous vortexing of 5 × 50 ml conical tubes. Compatible with BV1003 and BV1003-E only — does not fit the Mortexer BV1005 or BenchMixer MP BV1007. Replaces the standard reversible cup head with a tool-free swap. 1 foam rack head per order. Companion 15 ml head: BV1003-T150.

Incubators Accessories

Extra Shelf, stainless steel, for H2505-40

Extra Shelf, stainless steel, for H2505-70

Extra Shelf, stainless steel, for H2505-130

Additional shelf for 45 liter incubators, 1 each

Additional shelf for 180 liter incubators, 1 each

Stacking kit for 180 liter incubator (height of top display approximately 135cm)

IncuView Integrated Microscope Shelf, 45L (For H3565-45 Only)

IncuView Integrated Microscope Shelf, 180L (For H3565-180, 180HD and 180HDO2 Only)

Optional O2 gas regulator

H3565-O2REG by Benchmark Scientific is an optional O2 gas regulator for SureTherm™ CO2 incubators (H3565 series), enabling tri-gas incubation with controlled O2, CO2, and N2. Connects to CGA580 O2 cylinders; 1/4 in tubing adapter included. Used for hypoxia cell culture (1–5% O2), stem cell protocols requiring sub-atmospheric oxygen, and hyperoxia studies. Confirm N2 supply availability for sub-atmospheric O2 control before ordering.

Water Baths Accessories

<h2>What Are Water Bath Accessories?</h2>
&nbsp;
Water bath accessories are the ancillary components that maximize the function, safety, sample capacity, and operational life of laboratory water baths. They fall into five categories: sample holders (tube racks, floating racks, flask trays, concentric ring covers) that organize and stabilize sample containers in the bath; temperature measurement tools (calibrated bath thermometers, RTD probes, temperature data loggers) that verify the bath is performing to specification; coverage and evaporation control items (gable lids, flat covers, hollow bath balls) that reduce heat loss and contamination; water conditioning products (antimicrobial additives, deionized water corrosion inhibitors) that maintain bath water quality; and plumbing components (tubing, hose clamps, insulation kits) for connecting circulating baths to external equipment. Select accessories based on your sample container format, the temperature at which the bath operates (higher temperatures need better coverage), and whether the bath is used for sensitive biological samples (requiring antimicrobial water treatment).
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Microtube Racks: Custom optional racks created to securely accommodate 0.5 mL, 1.5 mL, and 2.0 mL microtubes for efficient sample processing in high densities.
</li>
<li dir="ltr" aria-level="1">
High-Capacity Test Tube Holders: Sturdy racks offered in various setups, accommodating up to 76 x 15 mL tubes or 30 x 50 mL tubes.
</li>
<li dir="ltr" aria-level="1">
Adaptable Tube Holder: An extensive selection of inserts designed for 5 mL, 15 mL, and 50 mL tubes to guarantee uniform thermal treatment for each sample.
</li>
<li dir="ltr" aria-level="1">
Efficient Design: Sturdy, corrosion-proof rack configurations that snugly fit in your water bath chamber to avoid tipping and loss of samples.
</li>
</ul>
&nbsp;
<h2>How to Choose Water Bath Accessories</h2>
&nbsp;
Tube racks and sample holders
Stainless steel tube racks with fixed openings (10 mm, 16 mm, 25 mm hole diameters) hold test tubes and microcentrifuge tubes in the bath upright and submerged to the required depth. Polypropylene tube racks that sink in water (made from a PP blend with higher density than water) are stable in shaking baths; confirm sinking vs. floating designation before purchasing for a shaking water bath application. Floating foam racks (HDPE foam, brightly colored) suspend tubes at the water surface for partial immersion and are suitable for thawing frozen cryovials gently. Flask trays and concentric ring covers accommodate round-bottomed and flat-bottomed Erlenmeyer flasks of 50-2000 mL.
Bath thermometers and temperature verification
Calibrated non-mercury glass thermometers (spirit-filled with red or blue alcohol) for water bath use are available in ranges of 0-50 degrees C and 0-100 degrees C, and verify the bath's setpoint accuracy by independent measurement. Digital reference thermometers with immersion RTD probes (PT100 or PT1000) provide higher accuracy verification (plus or minus 0.1 degrees C) and are required for GLP and cGxP compliance documentation. Traceable calibration certificates with NIST reference are available for digital probe thermometers used in regulated laboratory environments.
Covers and evaporation control
Gable (ridge) lids deflect condensate from the inside surface of the lid to the bath walls, preventing droplets from falling onto open sample vessels. Flat polycarbonate or stainless steel lids are simple and cost-effective, but they accumulate condensate pools that drip. Hollow ball lids (polyethylene bath balls, 35-40 mm diameter, floating in a layer on the bath surface) are particularly effective at reducing evaporation and maintaining temperature while allowing easy sample insertion and removal without removing a rigid lid; they can reduce evaporative loss by over 80% at 60 degrees C compared to an open-top bath. Covers are essential for baths operating above 80 degrees C, where evaporation rates are high.
Antimicrobial additives and water quality
Bacterial, algal, and fungal contamination of bath water occurs readily at 37 degrees C (physiological temperature), producing biofilms on tank walls and heating elements that can cross-contaminate open sample vessels. Quaternary ammonium-based antimicrobial bath additives (added at 1:100 to 1:1000 v/v to deionized water) maintain water clarity and reduce biofilm formation. Corrosion inhibitor additives for stainless steel tanks protect against pitting corrosion when deionized water (which lacks the buffering of tap water and can be mildly aggressive to stainless steel) is used. Always confirm that additives are compatible with your sample type and bath material before use.
Plumbing kits for circulating baths
Circulating baths are connected to external jacketed vessels, reactor jackets, and instruments via flexible silicone or polyurethane tubing, hose barb fittings, and hose clamps. Plumbing kits from Thermo Fisher (Precision bath plumbing packages) and PolyScience include compatible tubing diameters and fittings for their specific circulating bath models. Thermal insulation wrap (foam pipe lagging) on external tubing runs between the bath and jacketed vessel reduces heat loss and improves temperature control at the external application.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Hollow polyethylene bath balls reduce evaporation by over 80% at 60-80 degrees C compared to open-top operation, significantly reducing the frequency of water top-ups and the energy lost through evaporative cooling at high setpoint temperatures. Spirit-filled non-mercury glass thermometers for water baths are calibrated to plus or minus 1 degree C; digital RTD reference probes provide plus or minus 0.1 degrees C accuracy and are required for documented temperature verification in GLP, ISO 9001, and CLIA-regulated environments. Polypropylene tube racks formulated to sink in water are specified for shaking water bath use; a standard floating foam rack will be swept out of position by the agitation mechanism in an orbital shaking bath, making sinking racks essential for shaker applications. Hollow bath ball lids and antimicrobial water conditioning have become standard practice in cell culture labs as replacements for open-top baths and uncontrolled tap water, driven by contamination events and GLP audit requirements.&nbsp;
&nbsp;
Upgrade your immersion heating system now&mdash;explore our water bath accessories and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a quote.

Optional Rack for 0.5 mL microtubes

SB0012-T5 by Benchmark Scientific is an optional rack holding 40 standard 0.5 ml microtubes for the SB-12L shaking water bath. It supports temperature-controlled orbital shaking from ambient to 80&deg;C at 30&ndash;200 rpm (25 mm orbit), enabling parallel small-volume enzyme, binding, and cell-free reaction workflows in one run.

Optional Rack for 1.5/2.0 mL microtubes

SB0012-T1520 by Benchmark Scientific is an optional rack holding 40 microtubes (1.5 ml or 2.0 ml) for the SB-12L shaking water bath. It enables temperature-controlled orbital shaking of up to 40 microtube-format samples simultaneously across the SB-12L&apos;s 30&ndash;200 rpm / ambient to 80&deg;C operating range.

Hotplate & Stirrer Accessories

<h2>What Are Hotplate and Stirrer Accessories?</h2>
&nbsp;
Hotplate and stirrer accessories are supplementary components for single-position and multi-position hotplate stirrers that improve temperature accuracy, expand vessel compatibility, enable reflux setups, and maintain equipment in working condition. The most important accessory for research-grade hotplate use is an external temperature probe, which monitors actual solution temperature rather than hotplate surface temperature, which can be 20 to 50 degrees C higher than the liquid in the vessel. PTFE stir bars in standard cylindrical, oval, octagonal, cross-shaped, and polygon geometries allow matching of bar shape to vessel type and mixing requirement. Support rods and clamp assemblies secure condensers, separating funnels, and other glassware above the hotplate for reflux chemistry. Magnetic stir bar retrieval wands recover stir bars from flasks without contaminating the solution. An external temperature probe is the single most impactful hotplate stirrer accessory: without one, you are controlling plate temperature, not solution temperature, and the two can differ by 20 to 50 degrees C.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li data-section-id="dpsp0x" data-start="25" data-end="139">Temperature sensors for compatible GHS-series hotplate stirrers, available in standard and glass-coated designs.</li>
<li data-section-id="yvvor4" data-start="140" data-end="248">Sensor support stands and clamps for secure positioning of temperature probes during heating applications.</li>
<li data-section-id="hdqu1" data-start="249" data-end="353">Support rods and clamp sets for mounting laboratory apparatus and accessories above hotplate stirrers.</li>
<li data-section-id="rtdv85" data-start="354" data-end="446">Magnetic stir bars, including standard and pivot ring styles, for efficient sample mixing.</li>
<li data-section-id="1hl26tt" data-start="447" data-end="560" data-is-last-node="">Chemically resistant clamp set options featuring inert PTFE construction for demanding laboratory environments.</li>
</ul>
&nbsp;
<h2>How to Choose Hotplate and Stirrer Accessories</h2>
&nbsp;
External temperature probes
Confirm probe type compatibility with the hotplate stirrer model: most digital hotplate stirrers accept either a PT1000 resistance temperature detector (RTD) or a Type K thermocouple, and these are not interchangeable between models. The probe is inserted directly into the solution and feeds temperature data back to the PID controller to maintain the solution (not the plate surface) at the setpoint. Probe length and sheath material (stainless steel, glass, or PTFE) should be matched to the vessel size and chemical compatibility requirements.
PTFE stir bars: geometry and size
PTFE stir bars are available in cylindrical, oval (egg-shaped), octagonal, cross (X-shape), polygon, and ring geometries. Cylindrical bars are the most common general-purpose format. Octagonal bars provide more turbulent mixing in flat-bottomed vessels than cylindrical bars. Cross-shaped bars improve mixing in round-bottom flasks by preventing the bar from riding the wall. Ring or hoop bars are used for mixing around fixed probes or frits inside the vessel. Stir bar length is selected to match vessel diameter, typically 30 to 50% of vessel inner diameter.
Support stands and clamp sets.
Support stands (rod-and-base assemblies) mount above or adjacent to the hotplate to hold condensers, addition funnels, thermometers, and other glassware in reflux setups. Confirm rod diameter compatibility with the clamp set (most lab glassware clamps fit 12.7 mm or 16 mm rods). Weighted bases provide stability for tall assemblies. Crossbar assemblies allow horizontal positioning of clamps at adjustable heights along the support rod.
Magnetic stir bar retrieval tools
Stir bar retrievers are magnetic wands encased in a non-contaminating sleeve (PTFE or glass) that attract and remove the stir bar from a vessel without inserting fingers or metal into the sample. Available as handheld wands or bench-mounted extractors. An essential accessory for labs processing multiple samples per day, as losing track of stir bars is among the most common minor equipment management issues in bench chemistry.
Replacement sensors and calibration weights
Temperature probes degrade after repeated heating cycles or chemical exposure; replace probes showing drift against a calibrated reference thermometer. For hotplate stirrer models with external calibration weights (balance verification), confirm the weight set is OIML or ASTM traceable for regulated workflows.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
PTFE stir bars should be inspected regularly for chipped or worn PTFE coating. Bare metal exposure from a chipped bar contaminates the sample with metallic particles and alters the bar's magnetic coupling properties, resulting in reduced mixing efficiency or bar stall at lower speeds. Discard and replace any stir bar showing PTFE damage. For regulated lab environments (GMP, ISO 17025), maintain a stir bar inventory log and retire bars on a scheduled basis. External temperature probes rated for immersion in aqueous solutions should be verified against a calibrated reference thermometer at least annually; probes showing more than 1 degree C deviation should be recalibrated or replaced.&nbsp;
&nbsp;
Looking for that one missing piece to complete your setup? Browse our accessories collection and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a friendly quote today.

Optional Rod for Hotplate/Stirrer (H3770 Series)

H3770-ROD by Benchmark Scientific is an optional support rod that mounts onto the H3770 series hotplate/stirrer to provide a vertical attachment point for lab clamps, condenser mounts, burette holders, and overhead accessories during heated stirring operations.

3D Rockers Accessories

<h2>What are 3D rocker accessories?</h2>
&nbsp;
3D rocker accessories are the interchangeable tube holders, platform mats, and container-retention clips that allow a 3D rocking platform to be used with different vessel types beyond flat trays resting directly on the platform surface. Tube holder accessories fix microcentrifuge, 15 mL, or 50 mL conical tubes in defined positions on the platform, enabling the 3D rocking motion to agitate tube contents without requiring a separate tube rotator. Non-slip platform mats grip trays, gel boxes, and flat containers by friction, preventing them from sliding during rocking. Container clips secure the edges of blot containers or larger trays at higher speeds.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Flat mats (small and large) for flask, plate, and container stable placement&nbsp;</li>
<li dir="ltr" role="presentation">Dimpled mats designed safely hold tubes during mixing</li>
<li dir="ltr" role="presentation">Stacking platforms with flat or dimpled mats to increase space for working area</li>
<li dir="ltr" role="presentation">Platform options with different clearances provide flexibility in multiple setups</li>
<li dir="ltr" role="presentation">Additional platform separators provide more vertical capacity</li>
<li dir="ltr" role="presentation">Packs for securing bigger and irregular lab vessels</li>
<li dir="ltr" role="presentation">Small and large platform sizes to match different models of rockers</li>
<li dir="ltr" role="presentation">Interchangeable accessories for personalized mixing configurations</li>
</ul>
&nbsp;
<h2>How to choose 3D rocker accessories</h2>
&nbsp;
Match tube holder accessories to your tube size and the rocker model
Tube holders for 3D rockers are designed for specific tube formats &mdash; microcentrifuge (1.5 mL and 2 mL), 15 mL conical, and 50 mL conical &mdash; and attach to the platform via a platform-specific mounting system. Confirm that the tube holder accessory is listed as compatible with your specific 3D rocker model, since mounting systems vary between manufacturers.
Use a non-slip mat for flat containers at low to moderate rocking speeds
A non-slip silicone or rubber platform mat holds flat trays and gel boxes by friction at rocking speeds up to approximately 20&ndash;25 rpm, suitable for most blot and gel incubation applications. At higher speeds or steeper tilt angles, the tray may slide despite the mat, and dedicated container clips provide more secure retention.
Choose container clips or tray holders for heavier or larger containers
For large gel staining dishes or containers with significant weight or liquid volume that might slide on the platform, dedicated container clips or tray holder frames that attach to the platform edges provide secure retention at any rocking speed. These are important when working with larger format blots or multiple staining trays simultaneously.
Consider a multi-format accessory kit for maximum versatility
A set covering a non-slip mat, microcentrifuge tube holder, and 50 mL conical tube holder allows the same 3D rocker to serve flat-surface and tube-mixing applications without separate orders per format, and is the standard starting accessory purchase for a new 3D rocker installation.
Verify material compatibility with your lab cleaning agents
Platform mats and tube holders are typically made from polypropylene, silicone, or polyurethane, and should be compatible with your lab disinfectants. Silicone mats resist common lab disinfectants; check materials for compatibility with bleach-based or solvent-based cleaning protocols used.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Tube holders for 3D rocking platforms must secure tubes against centrifugal and gravitational forces during the tilting cycle, and the holder's design determines the maximum safe rocking speed. As of 2026, universal tube holders fitting multiple formats from a single base mount have become available, reducing the number of separate accessories needed for labs mixing different tube sizes on the same 3D rocker.
<a href="https://mbpinc.net/contact-us">Contact the MBP team today </a>to request a quote and find the right accessories for your 3D rocker.

3D Rocker Accessories

Optional Stacking Platform with Flat Mat (4.5” clearance)

B3D5000-STK by Benchmark Scientific is the optional stacking platform for the BenchWaver™ 3D Rocker (B3D5000). Adds a second working level with 4.5" clearance above the base platform, doubling blot tray and microplate capacity on a single instrument. Includes non-slip flat mat. Fits B3D5000 only.

Optional Temperature Probe (H3770 Series)

The H3770-TP by Benchmark Scientific is an optional external temperature probe for the H3770 series digital hotplates (H3770-H and H3770-HS). It connects directly to the hotplate's microprocessor to enable sample-temperature control rather than surface control, maintaining ±1°C accuracy. Compatible with the H3770-H hotplate and H3770-HS hotplate stirrer; not compatible with the H3770-S stirrer-only model.

Optional attachment for 16 x 5-7ml tubes (12-13mm)

BV1007-T57 by Benchmark Scientific is a 16-position foam insert for the BenchMixer™ MP Vortex Mixer (BV1007), designed for simultaneous vortexing of 5–7 ml tubes with 12–13 mm outer diameters such as culture tubes and scintillation vials. Compatible with BV1007 and BV1007-E. Order using SKU BV1007-T57 at <a href="https://www.mbpinc.net/quickorder">mbpinc.net/quickorder</a> or contact <a href="mailto:customerservice@mbpinc.net">customerservice@mbpinc.net</a>.

Optional attachment for 70 x 0.5ml tubes

BV1007-T05 by Benchmark Scientific is a foam insert for the BenchMixer MP BV1007 vortex mixer, enabling simultaneous vortexing of up to 70 × 0.5 ml microcentrifuge tubes. The BV1007's automatic recognition feature detects the BV1007-T05 when installed and adjusts maximum speed accordingly. Compatible with BV1007 (115V) and BV1007-E (240V) only — not compatible with BV1003 or BV1005. Parent instrument BV1007 operates 200–3,000 rpm with a built-in timer (1 sec–999 min) and +4°C to +65°C range. 1 insert per order.

Optional dimpled mat for use with a variety of tubes

The B3D5000-DIMP by Benchmark Scientific is an optional 13.5 x 13 inch autoclavable dimpled mat for the BenchWaver 3D Rocker (B3D5000). Use in place of the standard flat mat when running tubes, conicals, or cylindrical containers on the BenchWaver platform. Sold as 1 mat per unit. The BenchWaver ships standard with a flat mat.

Ultraviolet Chamber Accessories

<h2>What Are Ultraviolet Chamber Accessories?</h2>
&nbsp;
Ultraviolet chamber accessories are the consumable and add-on components that maintain or extend the functionality of benchtop UV-C decontamination chambers: replacement 254 nm UV-C lamps, interior shelving for multi-level item loading, hanging rods for suspending small tools at optimal irradiation distance, and turntables for rotating items during exposure cycles. Accessories are model-specific&mdash;interior shelf dimensions and lamp socket specifications vary by UV chamber manufacturer and model&mdash;so correct identification of the chamber model is required before ordering replacements or additions.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Stainless steel extra shelves: for increased chamber capacity
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
UV transparent shelves:&nbsp;for maximum UV penetration
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
UVC indicator stickers: for quick exposure verification
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
UVC indicator cards: for cycle validation and monitoring
</li>
</ul>
&nbsp;
<h2>How to Choose UV Chamber Accessories</h2>
&nbsp;
Replacement Lamp Compatibility
A 254 nm UV-C replacement lamp must match the original lamp's physical dimensions, socket type (typically G13 bi-pin), wattage, and voltage rating (115V 60Hz or 230V 50Hz). Using a non-OEM lamp that differs in output wavelength, intensity, or physical fit can alter the chamber's validated decontamination dose and may void manufacturer performance guarantees.
When to Replace UV-C Lamps
Most UV-C germicidal lamps are rated for approximately 9,000&ndash;12,000 hours of operation before output falls to 80% of initial intensity&mdash;the threshold at which germicidal effectiveness is considered compromised. Labs with high-frequency daily cycling should track accumulated operating hours rather than relying solely on a fixed calendar replacement schedule. Verify lamp output with a 254 nm UV-C radiometer annually regardless of hours used.
Shelf Dimensions and Load Capacity
Interior shelves are dimensioned to fit the specific chamber's interior width, depth, and height. Before ordering, measure the internal chamber dimensions or reference the chamber's accessory guide. Confirm the shelf's load rating against the heaviest items you intend to process&mdash;glass instruments and metal tools can be heavier than expected.
Hanging Rod Applications
Hanging rods are most valuable for cylindrical or narrow items (tweezers, forceps, dissecting tools, pipette sleeves, small tubing) where horizontal placement creates a shadow zone on the underside. Hanging vertically exposes the full circumference to UV-C light.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
UV-C lamps degrade gradually&mdash;output at 254 nm typically falls to 80% of initial value at the rated lamp life (usually 9,000&ndash;12,000 hours), at which point replacement is recommended to maintain documented decontamination efficacy. Lamp degradation is not visible to the naked eye; labs operating under GLP or GMP guidelines should verify lamp output using a calibrated 254 nm radiometer or UV intensity meter annually and document results. As of 2026, some UV chamber manufacturers provide RFID-enabled lamp modules that log cumulative operating hours and alert users when replacement thresholds are reached.
Get premium-quality ultraviolet chamber accessories from Molecular Biology Products Inc. (MBP).&nbsp;<a href="https://mbpinc.net/contact-us">Contact today with our expert team</a> to find the right accessories for your lab.

Optional extra shelf, UV Transparent

B1450-SH-UV by Benchmark Scientific is a UVC-transparent replacement or additional shelf for the UV-Clave™ decontamination cabinet (B1450), allowing germicidal UVC light to pass through and expose items on the shelf and surfaces below simultaneously. One shelf is included with the B1450; B1450-SH-UV provides an extra layer to increase decontamination capacity per cycle.