3D Rockers Accessories

<h2>What are 3D rocker accessories?</h2>
&nbsp;
3D rocker accessories are the interchangeable tube holders, platform mats, and container-retention clips that allow a 3D rocking platform to be used with different vessel types beyond flat trays resting directly on the platform surface. Tube holder accessories fix microcentrifuge, 15 mL, or 50 mL conical tubes in defined positions on the platform, enabling the 3D rocking motion to agitate tube contents without requiring a separate tube rotator. Non-slip platform mats grip trays, gel boxes, and flat containers by friction, preventing them from sliding during rocking. Container clips secure the edges of blot containers or larger trays at higher speeds.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Flat mats (small and large) for flask, plate, and container stable placement&nbsp;</li>
<li dir="ltr" role="presentation">Dimpled mats designed safely hold tubes during mixing</li>
<li dir="ltr" role="presentation">Stacking platforms with flat or dimpled mats to increase space for working area</li>
<li dir="ltr" role="presentation">Platform options with different clearances provide flexibility in multiple setups</li>
<li dir="ltr" role="presentation">Additional platform separators provide more vertical capacity</li>
<li dir="ltr" role="presentation">Packs for securing bigger and irregular lab vessels</li>
<li dir="ltr" role="presentation">Small and large platform sizes to match different models of rockers</li>
<li dir="ltr" role="presentation">Interchangeable accessories for personalized mixing configurations</li>
</ul>
&nbsp;
<h2>How to choose 3D rocker accessories</h2>
&nbsp;
Match tube holder accessories to your tube size and the rocker model
Tube holders for 3D rockers are designed for specific tube formats &mdash; microcentrifuge (1.5 mL and 2 mL), 15 mL conical, and 50 mL conical &mdash; and attach to the platform via a platform-specific mounting system. Confirm that the tube holder accessory is listed as compatible with your specific 3D rocker model, since mounting systems vary between manufacturers.
Use a non-slip mat for flat containers at low to moderate rocking speeds
A non-slip silicone or rubber platform mat holds flat trays and gel boxes by friction at rocking speeds up to approximately 20&ndash;25 rpm, suitable for most blot and gel incubation applications. At higher speeds or steeper tilt angles, the tray may slide despite the mat, and dedicated container clips provide more secure retention.
Choose container clips or tray holders for heavier or larger containers
For large gel staining dishes or containers with significant weight or liquid volume that might slide on the platform, dedicated container clips or tray holder frames that attach to the platform edges provide secure retention at any rocking speed. These are important when working with larger format blots or multiple staining trays simultaneously.
Consider a multi-format accessory kit for maximum versatility
A set covering a non-slip mat, microcentrifuge tube holder, and 50 mL conical tube holder allows the same 3D rocker to serve flat-surface and tube-mixing applications without separate orders per format, and is the standard starting accessory purchase for a new 3D rocker installation.
Verify material compatibility with your lab cleaning agents
Platform mats and tube holders are typically made from polypropylene, silicone, or polyurethane, and should be compatible with your lab disinfectants. Silicone mats resist common lab disinfectants; check materials for compatibility with bleach-based or solvent-based cleaning protocols used.
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Tube holders for 3D rocking platforms must secure tubes against centrifugal and gravitational forces during the tilting cycle, and the holder's design determines the maximum safe rocking speed. As of 2026, universal tube holders fitting multiple formats from a single base mount have become available, reducing the number of separate accessories needed for labs mixing different tube sizes on the same 3D rocker.
<a href="https://mbpinc.net/contact-us">Contact the MBP team today </a>to request a quote and find the right accessories for your 3D rocker.

3D Rocker Accessories

Stacking platform, small 10.5"x7.5" with flat mat (3.0"separation)

B3D-STACK by Benchmark Scientific -- small stacking platform (10.5" x 7.5") with flat mat and 3.0" vertical separation for the Mini BlotBoy 3D Rocker (B3D1008) and compatible Benchmark 3D rockers. Doubles rocking capacity without adding bench footprint. Choose B3D-STACK-D for the dimpled mat variant.