Incubators

Shaking Incubator Accessories

<h2>What Are Shaking Incubator Accessories?</h2>
&nbsp;
Shaking incubator accessories are platform attachments and replacement components that secure culture vessels to the shaking deck, expand the range of vessel types a single incubator can accommodate, and maintain safe operation at high agitation speeds. The primary accessories are flask clamps (spring-type or magnetic-attachment systems) for Erlenmeyer flasks of specific volumes, tube racks for culture tubes and centrifuge tubes, microplate holders for 24-well, 96-well, and deep-well plate formats, universal platforms with non-slip surfaces for various container types, and adhesive mats for securing irregularly shaped vessels. Accessories are not universally interchangeable: platform slot patterns, clamp arm geometry, and attachment mechanisms vary by manufacturer and model, so confirm compatibility with the specific shaking incubator before ordering. Always match the flask clamp size to the exact flask volume in use; undersized clamps allow movement that damages cultures, and oversized clamps do not seat correctly in platform slots.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">MultiTherm Touch blocks offer specialized holders for cryotubes, PCR plates, and centrifuge tubes up to 5ml.</li>
<li dir="ltr" role="presentation">Microplate blocks provide secure, uniform agitation for standard and deep-well 96-well plates.</li>
<li dir="ltr" role="presentation">Universal spring platforms offer a flexible solution for holding various bottle and flask sizes on a single surface.</li>
<li dir="ltr" role="presentation">Precision tube adapters allow you to mix 0.2ml to 2.0ml tubes with perfect stability and heat transfer.</li>
<li dir="ltr" role="presentation">Stainless steel shelves help you maximize your incubator&rsquo;s internal capacity for static or upright samples.</li>
</ul>
&nbsp;
<h2>How to Choose Shaking Incubator Accessories</h2>
&nbsp;
Flask clamp size and type
Flask clamps are specified by flask volume: 50 mL, 125 mL, 250 mL, 500 mL, 1 L, and 2 L are the standard sizes. One-piece stainless steel clamp construction is preferable to spot-welded or riveted designs for durability at high agitation speeds. For flasks 2 L and above, clamps with a secondary girdle ring provide additional security during prolonged shaking at 200 rpm or above. Magnetic clamp systems (such as MAGic Clamp-style designs) allow tool-free, rapid exchange between flask sizes without loosening bolts.
Tube racks
Tube racks for shaking incubators accommodate standard 10 mL, 14 mL, 17 mL, 50 mL, and culture tube formats, slotted into the platform deck. Adjustable tube racks that fit multiple tube diameters offer more flexibility than fixed-diameter designs. Confirm the number of tube positions and whether the rack base fits the specific platform slot pattern of your incubator.
Microplate holders
Microplate holders secure 96-well, 24-well, deep-well (2 mL per well), and skirted PCR plate formats to the shaking platform. Platforms designed for microplates typically operate at smaller orbit sizes (19 mm) and higher speeds (up to 400 rpm) compared to flask platforms. Confirm that the holder is rated for the plate format and the speed required by your protocol.
Universal platforms and adhesive mats
Universal platforms with rubber-coated surfaces provide a non-slip base for tissue culture flasks (T-25, T-75), Petri dishes, staining trays, and containers that do not fit standard clamps. Adhesive mats function similarly and are useful for microcentrifuge tube arrays or multiple small containers. Replace adhesive mats periodically as tackiness degrades with repeated use and autoclaving.
Platform compatibility
Before purchasing accessories, identify the platform slot pattern (tab-and-slot vs. screw-mount vs. magnetic) specific to your shaking incubator model. Accessories from the same manufacturer as the incubator are the safest choice; third-party platforms may fit universal tab-and-slot patterns, but should be verified before high-speed use.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Stainless steel flask clamps are the preferred material for autoclavability and chemical resistance. Verify whether accessories can be autoclaved at 121 degrees C; not all rubber or plastic components on tube racks and mats withstand repeated steam sterilization. The load capacity of the platform (in kg per position) limits the total mass of vessel plus culture volume that can be safely agitated; exceeding this limit at high speed stresses the drive bearings. For heavy-use labs running continuous 24-hour shaking protocols, select clamps with single-piece construction and check the drive belt or brushless motor specifications for continuous-duty cycle ratings.&nbsp;
&nbsp;
Ready to optimize your incubator&rsquo;s capacity? Browse our accessories collection and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a friendly quote today.

Block, 96x2ml plate, for MultiTherm Touch

H5100-2DWMP by Benchmark Scientific is a 96-well, 2 mL deep-well microplate block for the MultiTherm Touch shaker (H5100-HCT), providing 0–105°C temperature control with precision-contoured wells for uniform heat transfer across all 96 positions. Sold separately from the H5100-HCT instrument; installs tool-free. Contact MBP at customerservice@mbpinc.net for block configuration guidance across the H5100 range.

Manufacture

Block, 96x500µl plate, for MultiTherm Touch

H5100-5DWMP by Benchmark Scientific is the 96-well 0.5 mL deep-well plate block for the MultiTherm Touch H5100 thermoshaker, covering 0–105°C. It is sold separately from the H5100 instrument and is not compatible with the original MultiTherm H5000.94 at MBP; order using catalog number H5100-5DWMP at mbpinc.net/quickorder.

Block, combination 15 x 0.5 and 20 x 1.5ml

H5000-CMB by Benchmark Scientific is a dual-format interchangeable block for Benchmark MultiTherm Touch and MultiTherm Vortex shaker-incubators, holding 15 × 0.5 ml and 20 × 1.5 ml tubes in a single block. Precision-contoured wells deliver uniform thermal transfer across all 35 positions from 0°C to 100°C. A practical choice for molecular biology labs that routinely use both 0.5 ml and 1.5 ml tubes in the same workflow.

Block, custom drilled, for tubes/vials up to 40mm tall

H5000-CU by Benchmark Scientific is a custom-drilled exchangeable block for the MultiTherm H5000 series thermoshakers, precision-machined to fit non-standard tube or vial formats up to 40 mm tall — supporting 0–100°C temperature control with simultaneous orbital mixing for cryovials, diagnostic tubes, septum vials, and other specialized containers. Contact MBP to specify tube dimensions and request a lead time.

Block, microplate, for MultiTherm Touch

H5100-MP by Benchmark Scientific is an exchangeable standard microplate block for the MultiTherm Touch™ H5100 shaker series, holding one SBS-footprint 96-well plate with a 0–105°C operating range. It delivers temperature-controlled mixing in 96-well format for ELISA incubation, cell-based assays, enzyme kinetics, and bead-based workflows.

Block, multipurpose for liquids, beads, etc. Chamber dimensions: 4 x 2.6 x 1"

H5000-WB by Benchmark Scientific is an open-well multipurpose interchangeable block for MultiTherm&trade; shakers. The 4 &times; 2.6 &times; 1-inch chamber holds liquids, beads, and miscellaneous small vessels for heating, cooling, and mixing over the 0&ndash;100&deg;C range. Compatible with Benchmark MultiTherm H5000-series instruments.

Combination block, 15x0.5ml and 20x1.5ml, for MultiTherm Touch

H5100-CMB by Benchmark Scientific is a combination heating block for the MultiTherm Touch (H5100-HCT), holding 15 × 0.5 mL and 20 × 1.5 mL microtubes simultaneously at 0–105°C. The 35-well exchangeable block allows concurrent incubation of two microtube formats in a single heating cycle, reducing tube transfer steps in molecular biology workflows.

Incubators Accessories

<h2>What Are Lab Incubator Accessories?</h2>
&nbsp;
Laboratory incubator accessories are replacement components, add-on attachments, and optional modules that extend the function of a CO2 incubator, microbiological incubator, shaking incubator, or refrigerated incubator beyond its out-of-the-box configuration. They fall into three broad groups: (1) interior organization (shelving, racks, rotisseries, and slides that configure usable chamber space for specific vessel types); (2) maintenance and calibration (CO2 sensor modules, humidity trays, HEPA filter assemblies, door gaskets, and temperature probes that keep the incubator in specification over time); and (3) contamination control (UV light replacement bulbs, anti-corrosion coating kits, and decontamination accessories that reduce microbial contamination risk in multi-user incubators). Using genuine replacement parts is important for CO2 sensors and HEPA filters in particular, as third-party substitutes may not meet the accuracy or fit specifications required for regulated laboratory workflows. Incubator accessories fall into three categories: organization (shelves, racks), maintenance (sensors, filters, gaskets), and contamination control (UV lamps, decontamination kits); buy the first two on a scheduled basis and the third on an as-needed basis.
&nbsp;
<h2 dir="ltr">What You Will Find:</h2>
&nbsp;
<ul>
<li dir="ltr" aria-level="1">
Extra plastic shelving provides a 10.5 x 8" surface area, perfect for adding a tier of storage for non-autoclavable tasks.
</li>
<li dir="ltr" aria-level="1">
Precision-fit design ensures the shelf slides perfectly into your H2200 series units for immediate use without any complicated setup.
</li>
</ul>
&nbsp;
<h2>How to Choose Incubator Accessories</h2>
&nbsp;
Shelving and interior organization
Stainless steel shelves are the most common incubator accessory, adding usable positions without a new unit. Wire-grid shelves allow better air circulation than solid shelves in forced-air incubators, which is important for temperature uniformity when the incubator is fully loaded. Confirm the shelf load rating in kg before stacking heavy culture bottles on a single shelf. Tube racks, slide holders, rotisseries, and microplate stacking frames are available for specific vessel formats.
CO2 sensor modules
CO2 incubators use either thermal conductivity (TC) or infrared (IR) sensors to measure CO2 concentration. TC sensors are less expensive but drift over time and require recalibration after each door opening. IR sensors are more stable, respond faster, and are preferred for high-frequency-access incubators. Replacement CO2 sensor modules are model-specific; always reference the exact incubator model number when ordering.
HEPA filters and air handling
Incubators with forced HEPA-filtered air circulation require periodic filter replacement (typically every 6 to 12 months under continuous use) to maintain the contamination barrier. A clogged HEPA filter reduces airflow, compromises temperature uniformity, and eventually trips an alarm. Replace on the manufacturer's recommended schedule, not on a reactive basis.
Door gaskets and seals
Door gaskets maintain the CO2 and humidity environment inside the chamber. Worn or cracked gaskets allow CO2 leakage, requiring the incubator to run the CO2 supply continuously and potentially causing pH drift in cultures. Inspect door seals quarterly and replace annually or at the first sign of deformation. Gaskets are model-specific; order using the exact incubator model number.
Humidity trays and water pans
CO2 incubators rely on an open water pan to maintain 90% to 95% relative humidity. Clean and refill the humidity tray weekly with sterile deionized water to prevent fungal and bacterial contamination of the water reservoir. Copper water pans (available for some models) reduce microbial growth in the tray compared to stainless steel.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
When sourcing replacement parts, always use the incubator manufacturer's part number, not just a generic description. Extra shelves, CO2 sensors, HEPA filters, and door gaskets from third-party suppliers may not meet the dimensional or performance tolerances of the original equipment. For incubators operating under GLP, GMP, or ISO 17025 frameworks, use only manufacturer-qualified replacement parts and document each replacement in the equipment logbook. Temperature probes used for incubator calibration verification should be traceable to NIST or equivalent national standards.&nbsp;
&nbsp;
Need a bit more room for your research? Check out our shelf options and <a href="https://mbpinc.net/contact-us">reach out to the MBP team</a> for a friendly quote today.

Incubator Accessories

Extra Shelf 10.5 x 8"

The H2200-SH by Benchmark Scientific is a 10.5 × 8 in plastic extra shelf for the myTemp Mini Digital Incubator (H2200-H and H2200-HC). Non-autoclavable. Adds a third storage level inside the 20 L myTemp Mini chamber.

Extra Shelf, 12.0 x 15.0", stainless steel

H2265-SH by Benchmark Scientific is a 12.0 × 15.0 in stainless steel shelf designed specifically for the MyTemp™ 65 Heating and Cooling Incubator (H2265-HC). Adding this shelf increases usable interior tiers to accommodate more flasks, bottles, tubes, and plates without overcrowding or disrupting airflow. Autoclavable stainless steel construction; sold individually.

Extra Shelf, stainless steel, for H2505-130

The H2505-130SH by Benchmark Scientific is a stainless steel extra shelf designed exclusively for the H2505-130 SureTemp Dual Convection 130L Incubator. Adds a full additional interior storage level for flasks, plates, tubes, and culture vessels.

Extra Shelf, stainless steel, for H2505-40

H2505-40SH by Benchmark Scientific is an additional stainless steel shelf designed exclusively for the H2505-40 SureTemp™ 40 L Dual Convection Incubator. It allows operators to subdivide the 13.7 × 13.7 × 13.7 in. interior into more configuration zones, fitting shorter vessels on multiple levels. Order by catalog number H2505-40SH via Quick Order at mbpinc.net/quickorder or contact customerservice@mbpinc.net.

Extra Shelf, stainless steel, for H2505-70

H2505-70SH by Benchmark Scientific is an extra stainless-steel shelf for the SureTemp™ Dual Convection Incubator H2505-70 (70 L). It adds a shelf position inside the H2505-70's 45 × 35 × 45 cm stainless-steel (316) interior to increase capacity for flasks, tubes, or plates during incubation. Sold separately from the H2505-70 incubator.