Microcentrifuge

Microcentrifuge Accessories

<h2>What Are Microcentrifuge Accessories?</h2>
&nbsp;
Microcentrifuge accessories maintain performance, extend tube-format versatility, and ensure safe operation of benchtop microcentrifuges. These include replacement fixed-angle rotors for 12&ndash;24 &times; 1.5/2.0 mL tube positions, tube adapters for 0.5 mL and 0.2 mL formats, aerosol-tight sealed rotor lids for biocontainment of infectious specimens, balance tubes for partial-load runs, and specialty rotors for PCR strips or 5.0 mL tubes where supported by the centrifuge model. All microcentrifuge accessories are model-specific, as rotor coupling systems and tube bore dimensions differ between manufacturers and even between models within the same brand, making exact model verification essential before ordering.
&nbsp;
<h2>What You Will Find:</h2>
&nbsp;
<ul>
<li>High-quality adapters and rotors for precise and reliable tube fit</li>
<li>Multiple formats including PCR strips, microtubes, plates, and spin columns</li>
<li>Specialized and high-capacity rotors for enhanced compatibility</li>
<li>Swing-out and sealed options for reliable and contamination-free processing</li>
</ul>
&nbsp;
<h2>How to Choose Microcentrifuge Accessories</h2>
&nbsp;
Replacement Rotor Identification
The rotor model number is typically printed on the rotor body or listed in the centrifuge user manual. Cross-reference it with the manufacturer's accessory catalog to confirm that the coupling system matches the centrifuge motor shaft. For standard 12-position rotors, verify compatibility with both 1.5 mL and 2.0 mL microtubes.
Tube Adapter Sizing
For 0.5 mL adapters, ensure the outer diameter closely matches the rotor bore so the tube remains secure during operation. For 0.2 mL adapters, confirm that PCR tubes are positioned correctly to achieve the intended centrifugal force while maintaining stability throughout the run.
Aerosol-Tight Sealed Lids
Choose sealed lids rated for the rotor's maximum operating RCF. O-rings should be inspected regularly for flattening, cracking, or discoloration and replaced immediately if any signs of wear appear. Maintaining replacement O-rings for frequently used lids helps ensure continued safe operation.
Specialty Rotors
Some microcentrifuge models support optional rotors for 5.0 mL tubes, PCR strips, or microplates. These accessories expand workflow flexibility but may operate at lower maximum RCF values than standard 1.5 mL rotors. Always verify the rated speed and force limits before use.
Balance Tubes
Balance tubes help maintain proper rotor balance during partial-load runs. They should closely match the mass and dimensions of the sample tubes being processed. Proper balancing reduces vibration, minimizes bearing wear, and supports long-term centrifuge performance.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Many modern fixed-angle rotors and polypropylene adapters are autoclavable, although specific sterilization requirements vary by manufacturer and material. Always follow the OEM maintenance and decontamination guidelines for each accessory. Rotor service life is generally determined by cumulative operating hours and manufacturer recommendations rather than visual appearance alone.
Sealed rotor lid systems with one-touch release mechanisms have become standard in modern molecular diagnostic laboratories, providing improved safety, easier maintenance, and enhanced biocontainment for regulated workflows.
Stop wasting time searching. The best microcentrifuge accessories are right here at MBP Products. <a href="https://mbpinc.net/contact-us">Connect with our expert team</a> to get your equipment accessories today.

Product Literature

4 x PCR (32 x 0.2ml) Strip rotor, each

The C2417-3202 by Benchmark Scientific is an optional 4-position PCR strip rotor for the MC-24R microcentrifuge, holding 32 x 0.2 ml strip tubes at up to 13,500 rpm / 16,602 x g. Enables direct high-speed centrifugation of 8-tube PCR strips without transferring to individual microtubes.

Manufacture

Adapter pack, for Cryovials (0.5 to 2.0ml) and 1.5/2.0ml HPLC vials, 4/pk.

C1005-AC2 by Benchmark Scientific is a 4-pack of centrifuge adapters for the MyFuge 5 (C1005 series) mini centrifuge, enabling it to run cryovials from 0.5 to 2.0 ml and 12 x 32 mm (1.5/2.0 ml) HPLC vials. These adapters support cryovial recovery, HPLC sample prep, and cell banking workflows.

COMBI-rotor for 24 x 1.5/2.0ml and 2 x PCR Strips (16 x 0.2ml), each

The C2417-RCMB by Benchmark Scientific is an optional COMBI-Rotor for the MC-24R microcentrifuge that holds 24 x 1.5/2.0 ml tubes and 2 x PCR strips (16 x 0.2 ml) simultaneously, reaching 13,500 rpm / 16,800 xg.

<h2>What Are Microcentrifuges?</h2>
&nbsp;
Microcentrifuges are compact, high-speed benchtop centrifuges designed specifically for 0.2&ndash;2.0 mL microtubes and PCR strips, operating at 10,000&ndash;21,000 &times;g in a fixed-angle rotor. They are the primary centrifugation instrument in molecular biology, biochemistry, and clinical molecular diagnostics labs: nucleic acid pellet formation after ethanol precipitation, spin-column DNA/RNA extraction and PCR cleanup steps (typically specified at 10,000&ndash;16,000 &times;g for 30&ndash;60 seconds), cell debris clearance from lysates, protein precipitation supernatant recovery, and brief sample clarification before downstream analysis. Standard benchtop microcentrifuges reach 14,000&ndash;15,000 RPM (16,000&ndash;21,000 &times;g), while high-speed models reach up to 21,000 RPM and approximately 31,000 &times;g. Refrigerated variants maintain 0&ndash;4&deg;C for temperature-sensitive workflows.
&nbsp;
<h2>What You Will Find:</h2>
&nbsp;
<ul>
<li>High-Speed Microcentrifuges: For faster sample processing</li>
<li>Refrigerated Microcentrifuges: For temperature-sensitive handling</li>
<li>Benchtop Microcentrifuge Systems: For routine lab working</li>
<li>5D Digital Microcentrifuge: With customizable time and speed options</li>
<li>Mini Microcentrifuges: Compact units for rapid spin-down tasks</li>
<li>MC-24 High-Speed Microcentrifuge: Features touch screen control and high speed</li>
<li>Microplate Centrifuges: Developed for PCR plates and strip formats</li>
<li>Microcentrifuge Accessories: For expanded tube flexibility and compatibility</li>
</ul>
&nbsp;
<h2>How to Choose a Microcentrifuge</h2>
&nbsp;
Maximum RCF vs. Protocol Requirements
Most spin-column kit protocols specify 10,000&ndash;16,000 &times;g. A standard microcentrifuge reaching 14,000&ndash;16,000 &times;g covers these requirements. If your lab performs alcohol-precipitation DNA/RNA pelleting (12,000&ndash;16,000 &times;g) or virus concentration steps (20,000+ &times;g), choose a model reaching at least 16,000 &times;g. High-speed models reaching 21,000&ndash;31,000 &times;g are available for specialized applications.
Rotor Tube Positions and Capacity
Most microcentrifuge rotors hold 12&ndash;24 &times; 1.5/2.0 mL tubes per run. Laboratories processing larger batches benefit from 24-position rotors, while smaller research groups may find 12-position models sufficient. Confirm that adapters for 0.5 mL and 0.2 mL tubes are available if required by your workflows.
Refrigerated vs. Ambient Temperature
Refrigerated microcentrifuges are recommended for RNA extraction, protein stability studies, cell viability applications, and any protocol requiring 4&deg;C centrifugation. Standard room-temperature models are suitable for routine DNA extraction and PCR cleanup procedures.
Noise Level and Footprint
Modern brushless DC motor microcentrifuges typically operate at &le;52 dB, making them quieter than older brush-motor systems. Most units occupy 200&ndash;300 mm of bench width, so confirm that sufficient clearance is available when the lid is fully open.
Safety Features
Essential safety features include lid-lock mechanisms, imbalance detection, and over-speed protection. Laboratories handling infectious materials should verify that aerosol-tight sealed rotor lids are available for the selected model.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
The standard spin-column step in most commercial DNA/RNA extraction kits specifies 10,000&ndash;16,000 &times;g for 30&ndash;60 seconds. Always confirm the rotor's maximum RCF from manufacturer specifications, since RPM values alone do not account for differences in rotor radius.
Microcentrifuge rotors are typically fixed-angle designs positioned at approximately 45&deg;, providing efficient pelleting and short sedimentation paths. Aerosol-tight sealed lids allow safe handling of BSL-2 samples and other applications requiring biocontainment. Modern brushless DC motors offer quieter performance, improved speed accuracy, and longer service intervals than legacy brush-motor systems.
Your search for high-performance microcentrifuges is over. <a href="https://mbpinc.net/contact-us">Contact now</a> with the expert team at Molecular Biology Products Inc. and get the right microcentrifuge for your lab today.

MC-12 Microcentrifuge with 12 place rotor Accessories

MC-12™HighSpeed Microcentrifuge (12 place)

The MC-12™ High Speed Microcentrifuge by Benchmark Scientific is a 12-place benchtop centrifuge reaching 15,000 rpm / 16,100 x g with a brushless, maintenance-free drive, aircraft-grade aluminum rotor, and a footprint under 9 inches wide. Standard configuration spins 12 x 1.5/2.0 ml microtubes; optional adapters extend to 0.5 ml and 0.2 ml tubes. Available in 115V (C1612) and 230V (C1612-E).

Speed

Capacity

Acceleration

Deceleration

Speed increment

Timer

Momentary

Dimensions

Weight

Electrical

Warranty

MC-12™ High Speed Microcentrifuge with 12 place rotor, 115v

MC-12™ High Speed Microcentrifuge with 12 place rotor, 230v

Optional 8 x 5ml rotor for MC-24™ Touch

2ml Cryovial adapters for C2417-R5 rotor, 8/pk

MC-24™ Touch High Speed Microcentrifuge with COMBI-Rotor Accessories

MC-24™HighSpeed Microcentrifuge (24 place)

The MC-24™ HighSpeed Microcentrifuge by Benchmark Scientific is a 24-place benchtop unit reaching 13,500 RPM / 16,800 × g with a touch-screen interface — the first in its class. The COMBI-Rotor™ holds both 1.5/2.0 ml microtubes and 0.2 ml PCR tubes or strips without adapters, supporting molecular biology, genomics, and clinical sample-processing workflows. Available in 115V (C2417) and 230V (C2417-E).

MC-24™ Touch High Speed Microcentrifuge with COMBI-Rotor, 115v

MC-24™ Touch High Speed Microcentrifuge with COMBI-Rotor, 230v

The C2417-R5 by Benchmark Scientific is an optional 8-position rotor for 5 ml tubes for the MC-24 Touch microcentrifuge (C2417). Replaces the standard COMBI-Rotor when dedicated 5 ml capacity is required. Sold individually; C2417 instrument sold separately.

Optional rotor with carriers for deep well plates up to 35mm tall (speed: 1500rpm)

C2000-DWMP by Benchmark Scientific is an optional rotor with carriers for the C2000 PlateFuge&#8482; MicroPlate MicroCentrifuge, rated to 1,500&nbsp;rpm, designed to spin deep well plates up to 35&nbsp;mm tall. It replaces the standard C2000 rotor for deep-well plate centrifugation in nucleic acid extraction, protein precipitation, and high-throughput liquid handling workflows.

Tube Adapter, hold 96 x 0.2ml or 8 and 12 position PCR strips, 2/pk

PlateFuge™ MicroPlate MicroCentrifuge with rotor and plate carriers Accessories

PlateFuge™ MicroPlate MicroCentrifuge with rotor and plate carriers

The Benchmark Scientific PlateFuge™ MicroPlate Centrifuge (C2000) is a compact microplate microcentrifuge—23 × 26 × 19.7 cm, 4.1 kg—with a patented 75° swing-out rotor spinning 2 × SBS microplates (up to 25mm height) or 24 × 0.2ml PCR strips at up to 2,550 rpm / 600 xg. It is the standard choice for pre-PCR plate spin-down, ELISA wash pelleting, and suspension-cell plate centrifugation on molecular biology benches. Ships with rotor and two plate carriers; available in 115V or 230V. MBP is a registered vendor to Howard Hughes Medical Institute, MD Anderson Cancer Center, Vanderbilt University, Eurofins, and many other institutes across the USA.

PlateFuge™ MicroPlate MicroCentrifuge with rotor and plate carriers, 115V

PlateFuge™ MicroPlate MicroCentrifuge with rotor and plate carriers, 230V

Strip Rotor for MyFuge Mini

C1008-ROT2A by Benchmark Scientific is the PCR strip rotor for the MyFuge Mini centrifuge (C1008 series), accommodating 4 × 8-tube PCR strips (32 × 0.2 ml) at up to 6,000 rpm and 2,000 xg. Ideal as a replacement or dedicated strip-tube rotor for molecular biology benches.

MyFuge™12 Plus Digital Mini Centrifuge Accessories

myFuge™ MiniCentrifuges (8 place) with 2 rotors

The MyFuge™ Mini Centrifuge by Benchmark Scientific is a palm-sized 6,000 rpm / 2,000 xg personal microcentrifuge with two included rotors: an 8-position microtube rotor (1.5/2.0 ml, with adapters) and a PCR strip rotor (4 x 8-tube strips). Universal voltage (100–240 V), near-silent motor. Available in five lid colours and two plug types (US/EU): C1008-B/C1008-B-E (Blue), C1008-C/C1008-C-E (Clear), C1008-G/C1008-G-E (Green), C1008-P/C1008-P-E (Purple), C1008-R/C1008-R-E (Red).

MyFuge™ Mini Centrifuge, blue lid, with 2 rotors, 100-240V (US plug)

MyFuge™ Mini Centrifuge, blue lid, with 2 rotors, 100-240V (EU Plug)

MyFuge™ Mini Centrifuge, clear lid, with 2 rotors, 100-240V (US plug)

MyFuge™ Mini Centrifuge, clear lid, with 2 rotors, 100-240V (EU Plug)

MyFuge™ Mini Centrifuge, green lid, with 2 rotors, 100-240V (US Plug)

MyFuge™ Mini Centrifuge, green lid, with 2 rotors, 100-240V (EU Plug)

MyFuge™ Mini Centrifuge, purple lid, with 2 rotors, 100-240V (US Plug)

MyFuge™ Mini Centrifuge, purple lid, with 2 rotors, 100-240V (EU Plug)

MyFuge™ Mini Centrifuge, red lid, with 2 rotors, 100-240V (US Plug)

MyFuge™ Mini Centrifuge, red lid, with 2 rotors, 100-240V (EU Plug)

Tube Adapter, hold 96 x 0.2ml or 8 and 12 position PCR strips, 2/pk.

C2000-A02 by Benchmark Scientific is a tube adapter for the PlateFuge™ C2000 microplate centrifuge, allowing it to spin 96 × 0.2 ml tubes or 8- and 12-position PCR strips. Sold in packs of 2, the adapters seat directly into the C2000 rotor without tools. Ideal for PCR plate prep, NGS library bead-cleanup steps, and high-throughput 0.2 ml tube pelleting. Order using catalog number C2000-A02 at <a href="https://www.mbpinc.net/quickorder">mbpinc.net/quickorder</a> or contact <a href="mailto:customerservice@mbpinc.net">customerservice@mbpinc.net</a>.

24 x 1.5/2.0ml Hermetically sealed rotor, each

C2417-2420H by Benchmark Scientific is a 24-position hermetically sealed fixed-angle rotor for the MC-24R™ microcentrifuge, rated to 13,500 rpm and 16,058 × g. It accepts 1.5 ml and 2.0 ml microtubes and provides aerosol containment for high-speed processing of biohazardous samples.