Infrared MicroSterilizer

<h2>What Are Infrared Micro Sterilizers?</h2>
&nbsp;
Infrared micro sterilizers (also called bacti-cinerators or IR loop sterilizers) are compact benchtop instruments that use a ceramic infrared heating element enclosed in a perforated stainless-steel chamber to generate a core temperature of 815&ndash;900&deg;C, completely sterilizing inoculating loops, needles, glass pipette mouths, and small borosilicate glass instruments inserted into the aperture in 5&ndash;7 seconds. They are the direct flame-free replacement for the Bunsen burner in microbiology, clinical, and research labs&mdash;delivering equivalent sterilization speed with no open flame, no combustion gases, no flammable solvents, and no aerosol splash risk from superheated instrument surfaces. Because they produce no flame and no volatile exhaust, they are approved for use inside Class II biosafety cabinets and in anaerobic environments where open flames are strictly prohibited.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
BactiZapper&trade; Infrared MicroSterilizer: for standard and rapid sterilization&nbsp;
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
BactiZapper&trade; TILT MicroSterilizer: for angled access and more convenient sterilization
</li>
</ul>
&nbsp;
<h2>How to Choose an Infrared Micro Sterilizer</h2>
&nbsp;
Aperture Diameter (14 mm vs. 35 mm)
Infrared micro sterilizers are available with 14 mm or 35 mm diameter apertures. The 14 mm model is designed for standard inoculating loops and needles; the 35 mm model accommodates wider instruments, glass tube mouths, and larger pipette openings. If your lab sterilizes culture tube mouths or 10 mL pipette openings, specify the larger aperture model.
Core Temperature and Standby Mode
Standard infrared micro sterilizers reach 815&ndash;900&deg;C at the element core; some models allow adjustment between a full sterilization setting and a standby mode at approximately 500&deg;C. The standby mode maintains readiness between cycles without cycling the element to full temperature repeatedly, reducing element wear during long work sessions.
Contactless vs. Manual Activation
Standard models activate by a switch or dial; some advanced designs (e.g., berner-safety IR sterilizers with contactless IR sensor technology) start the sterilization cycle automatically when an instrument is inserted into the aperture, reducing the risk of touching a hot element and improving workflow speed.
Tilt Feature
Tilt-adjustable models (e.g., Benchmark BactiZapper Tilt, BactiZapper XL Tilt) allow the aperture angle to be directed toward the operator, improving loop insertion ergonomics and reducing awkward wrist angles during high-frequency sterilization sessions. This is particularly valuable for labs performing many loopfuls per session.
Compatibility with BSC or Anaerobic Chamber
Confirm the model dimensions fit inside your BSC's work area and that the heat output does not create a localized temperature zone that could affect HEPA filter integrity. For anaerobic chambers, verify the model is compatible with the inert gas atmosphere and does not include a gas purge or external vent requirement.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
At 815&ndash;900&deg;C, infrared micro sterilizers destroy all vegetative bacteria, spores, and most viruses on metal and borosilicate glass surfaces in 5&ndash;7 seconds of exposure&mdash;validated against the performance of standard Bunsen flame sterilization in published microbiology laboratory protocols. The ceramic heating element is asbestos-free in all current models (a distinction from older designs); confirm this specification when evaluating any older or non-branded infrared sterilizer. As of 2026, the BactiZapper (Benchmark Scientific) and Crystal Industries micro incinerator represent the most widely distributed IR loop sterilizers in North American research and clinical labs. Allow the sterilized loop to cool for 3&ndash;5 seconds after removal from the aperture before contacting agar or liquid media to avoid killing the transferred culture.
Sterilize your lab instruments with the right equipment. <a href="https://mbpinc.net/contact-us">Contact the expert team </a>of Molecular Biology Products Inc. (MBP) today to find the perfect match.

Product Literature

BactiZapper™ Infrared MicroSterilizer

B1000 by Benchmark Scientific is the BactiZapper™ Classic infrared micro-sterilizer — sterilizes platinum loops, needles, and glass tube/pipette mouths in 5–7 seconds at 815°C (1,500°F). Asbestos-free core; perforated stainless steel guard; 14 mm × 153 mm chamber; 500°C standby between cycles. Suitable for biosafety cabinet use. 115 V / 170 W; 2.9 lbs. 1-year warranty. Order at mbpinc.net.

Manufacture

BactiZapper™ Infrared MicroSterilizer, 115V

BactiZapper™ Infrared MicroSterilizer, 230V

Heating Element Assembly for BactiZapper Classic (B1000), 115V

Heating Element Assembly for BactiZapper Classic (B1000-E), 230V

Heating Element Assembly for BactiZapper Tilt (B1001), 115V

Heating Element Assembly for BactiZapper Tilt (B1001-E), 230V

Heating Element Assembly for BactiZapper XL Tilt (B1001-XL), 115V

Heating Element Assembly for BactiZapper XL Tilt (B1001-XL-E), 230V

BactiZapper™ TILT MicroSterilizer

The B1001 BactiZapper™ TILT MicroSterilizer by Benchmark Scientific is an infrared sterilizer reaching 815°C in 5–7 seconds, with a 55° adjustable tilt head. The 14 mm chamber sterilizes inoculating loops, needles, and tube mouths without open flame. Available in 120V and 230V.

BactiZapper™ Tilt, MicroSterilizer with adjustable tilt angle, 115V

BactiZapper™ Tilt, MicroSterilizer with adjustable tilt angle, 230V

BactiZapper™ Tilt XL, MicroSterilizer with adjustable tilt angle, 115V

BactiZapper™ Tilt XL, MicroSterilizer with adjustable tilt angle, 230V

Infrared MicroSterilizer Accessories

<h2>What Are Microbead Sterilizers?</h2>
&nbsp;
Microbead sterilizers are compact benchtop instruments that heat 1.5&ndash;2 mm glass beads to temperatures between 150&deg;C and 300&deg;C inside an insulated chamber, enabling rapid sterilization of metal instrument tips such as forceps, scissors, dissecting needles, and scalpel handles through conductive heat transfer in approximately 15 seconds per cycle. They provide a flame-free alternative to alcohol-lamp sterilization for repeated instrument decontamination in animal surgery, plant tissue culture, microbiology, and pathology laboratories. Because they operate without gas, open flames, or chemicals, microbead sterilizers are suitable for use inside Class II biosafety cabinets and in anaerobic environments where flames are prohibited.
&nbsp;
<h2>What you will find:</h2>
&nbsp;
<ul>
<li><a href="https://mbpinc.net/equipments/autoclave-and-biosafety-cabinets/microbead-sterilizer">Microbead sterilizer series</a>: Benchtop systems designed for rapid and reliable instrument sterilization.</li>
<li><a href="https://mbpinc.net/equipments/autoclave-and-biosafety-cabinets/microbead-sterilizer/microbead-sterilizer-accessories">Microbead sterilizer accessories</a>: Replacement heating elements, refill glass beads, loop holders, and slide dryer attachments to support continuous laboratory operation.</li>
</ul>
&nbsp;
<h2>How to Choose a Microbead Sterilizer</h2>
&nbsp;
Chamber Depth and Aperture Diameter
Two chamber configurations are common: standard-depth units, approximately 8 cm deep, for short forceps tips and dissecting tools, and deep-format models, approximately 15 cm deep, for longer instruments. The aperture diameter determines the maximum instrument width that can be accommodated, so compatibility with commonly used tools should be confirmed before purchase.
Temperature Range and Control
Standard models typically operate at 250&deg;C, which is sufficient for eliminating vegetative bacteria and many spore-forming organisms from instrument tips. Digital models provide precise temperature adjustment and monitoring through electronic controls, making them preferable for applications requiring documented operating conditions. Units capable of reaching 300&deg;C may be selected for specialized high-temperature workflows, although prion deactivation requires dedicated sterilization procedures beyond conventional bead sterilization methods.
Warm-up Time and Duty Cycle
Most microbead sterilizers require a warm-up period of approximately 10&ndash;15 minutes to reach operating temperature. Once heated, they can operate continuously throughout the workday, while insulated housings help maintain safe exterior temperatures during prolonged use.
Biosafety Cabinet Compatibility
Flame-free operation makes microbead sterilizers compatible with Class II biosafety cabinets, provided that adequate clearance is maintained according to the cabinet manufacturer's recommendations. Laboratories should verify that the unit's footprint and heat output align with their specific biosafety setup.
Glass Bead Replacement
Glass beads serve as the primary consumable in these systems and should be replaced periodically as they become discolored or accumulate biological residues. Replacement frequency depends on instrument usage patterns, contamination risks, and laboratory protocols.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Glass-bead sterilization at 250&deg;C can eliminate vegetative bacteria and bacterial spores from instrument tips within approximately 15 seconds of contact, according to established laboratory protocols for microbiology and surgical research applications. Operating temperatures should be verified periodically using calibrated thermometers or thermocouples to ensure consistent performance over time. Microbead sterilizers are intended for research use only (RUO) and are not validated as medical sterilization devices under FDA 510(k) or comparable regulatory frameworks. As of 2026, replacement glass beads and accessory components remain widely available to support long-term operation in research laboratories.
A high-quality microbead sterilizer for your laboratory is just one click away. <a href="https://mbpinc.net/contact-us">Contact the expert team at Molecular Biology Products Inc. (MBP)</a> today to find the solution that best matches your workflow requirements.

Microbead Sterilizer

The B1000-RA by Benchmark Scientific is a 115V replacement heating element assembly for the BactiZapper Classic Infrared MicroSterilizer (B1000). Restores full sterilization function to the B1000 instrument. For 230V, order B1000-RA-E.

Manufectuer

B1000-RA-E by Benchmark Scientific is the 230V replacement heating element assembly for the BactiZapper Classic micro-sterilizer (B1000-E). The asbestos-free infrared core restores the instrument's ability to sterilize inoculation loops, needles, and spreaders at 500 °C (low) or 815 °C (high) in 5–7 seconds without open flame. Designed for the 230V international model only — use B1000-RA for the 115V North American version.

B1001-RA by Benchmark Scientific is the 115V replacement heating element assembly for the BactiZapper Tilt (B1001) microsterilizer, restoring chamber temperatures to 815°C (1500°F) with 5–7 second sterilization cycles. Engineered as a direct-fit replacement for the B1001 unit, this assembly maintains flame-free, splatter-free loop and tube-mouth sterilization.

B1001-RA-E by Benchmark Scientific is the 230V replacement heating element assembly for the BactiZapper™ Tilt micro-incinerator (B1001-E). The BactiZapper reaches 815 °C / 1500 °F and sterilises inoculating loops in 5–7 seconds. This part restores the instrument without a full-unit replacement.

B1001-XL-RA by Benchmark Scientific is the 115V OEM replacement heating element assembly for the BactiZapper XL Tilt (B1001-XL) infrared micro-sterilizer, restoring full radiant-heat sterilization performance in the 35 mm chamber. A direct fit for B1001-XL instruments; not compatible with the standard BactiZapper Tilt (B1001) or 230V models. Includes 1-year manufacturer's warranty.

B1001-XL-RA-E by Benchmark Scientific is the 230V replacement heating element assembly for the BactiZapper&trade; XL Tilt infrared micro-sterilizer (B1001-XL-E). Restores full 35&nbsp;mm chamber sterilization function after element wear. Not compatible with 115V BactiZapper models. Research Use Only.

Loop holder attachment

B1000-01 by Benchmark Scientific is a loop holder attachment for the BactiZapper™ B1001 infrared micro-sterilizer, providing hands-free support for inoculating loops and needles during the sterilization cycle. It keeps tools positioned inside the heating element without manual holding, reducing fatigue in high-volume microbiology streaking workflows.

Manufacturer

Slide dryer attachment for 3 slides

B1000-03 by Benchmark Scientific is the BactiZapper™ Slide Dryer Attachment, an aluminum slide holder with a stainless steel clip that secures up to 3 glass slides horizontally for heat-fixing and drying using the B1000 BactiZapper™ Infrared MicroSterilizer. It provides a flame-free alternative to using a Bunsen burner for slide fixation in microbiology workflows. Sold individually.