Liquid Handling

Laboratory Aspirator Accessories

<h2>What Are Laboratory Aspirator Accessories?</h2>
&nbsp;
Laboratory aspirator accessories are the consumable and replacement components that keep a benchtop vacuum aspirator operating safely and efficiently. These include hydrophobic/antibacterial in-line filters, 2-liter polycarbonate collection bottles with overflow protection, silicone tubing, and handheld aspiration tools with adapters.
The in-line filter is the most critical safety component, acting as the primary barrier between biohazardous waste and the vacuum pump. Tubing and collection bottles are regularly replaced to maintain performance and prevent contamination or leaks during operation.
&nbsp;
<h2>What you will find:</h2>
&nbsp;
<ul>
<li>Hydrophobic filters: for controlling contamination and system protection</li>
<li>Single-channel adapters: for precise aspiration tasks</li>
<li>Multi-channel adapters: for higher performance output</li>
<li>Handheld vacuum controllers: for controlled liquid removal</li>
<li>Silicone tubing sets: for flexible connection of the system</li>
<li>Quick disconnect kits: for easy setup and maintenance</li>
<li>Collection bottles: with lids for safe liquid storage</li>
<li>Silicone O-rings: for secure sealing and preventing leaking</li>
</ul>
&nbsp;
<h2>How to Choose Laboratory Aspirator Accessories</h2>
&nbsp;
In-Line Filter Replacement
Replace the in-line filter immediately if it becomes wet, discolored, or saturated. A compromised filter can no longer block aerosols effectively and may allow contamination to reach the pump system. Always use OEM-compatible filters to ensure proper fit and hydrophobic performance.
Collection Bottle Condition
Inspect collection bottles regularly for cloudiness, cracks, or malfunctioning overflow valves. Replace bottles that show wear or damage to maintain safe waste containment. Avoid using solvents that may degrade polycarbonate material.
Tubing Integrity
Silicone tubing should remain flexible and free from kinks or permanent deformation. Replace tubing when it becomes stiff, damaged, or no longer forms secure connections. Autoclaving is typically supported, but repeated use may require periodic replacement.
Handpiece and Adapter Selection
Ensure handpieces and adapters match your application needs. Standard tip adapters are used for general aspiration, while fine stainless-steel capillary tips are required for microplate and precise liquid removal tasks.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
Modern laboratory aspirator systems use oil-free vacuum pumps with adjustable pressure ranges, hydrophobic in-line filters, and overflow-protected collection bottles to ensure safe and reliable liquid handling. These systems are widely used in cell culture, clinical workflows, and general laboratory applications.
Routine replacement of consumables such as filters, tubing, and bottles is essential for maintaining performance, preventing contamination, and extending instrument lifespan. Using manufacturer-approved accessories ensures compatibility and consistent operation.
 Grab the best quality laboratory aspirator accessories today. <a href="https://mbpinc.net/contact-us" style="color: #236fa1; text-decoration: underline;"> Contact the expert team </a> of Molecular Biology Products (MBP) now.

Extra tubing set, 1 meter

V0020-TB by Accuris Instruments is a 1-meter silicone tubing extension with connector for the Accuris ASPIRE™ Laboratory Aspirator (V0020 / V0020-E). Extends the reach of the handheld vacuum controller for BSC, incubator, and multi-bench workflows.

Manufacture

Graduated, PC collection bottle and lid (included)

The V0020-BOT by Benchmark Scientific is a 2-litre graduated polycarbonate collection bottle with lid, supplied as the OEM replacement vessel for the Benchmark Scientific Aspire V0020 aspirator. Autoclavable at 121°C for up to 30 cycles, it is suited for routine tissue culture waste collection and biohazardous aspirate containment in BSL-1 and BSL-2 environments.

Handheld vacuum controller with single channel adapters

V1002 by Benchmark Scientific — Handheld Vacuum Controller for the Aspire™ V0020 Laboratory Aspirator, supplied with three single-channel adapters: A (controller), B (200&nbsp;µL tip), and C (40&nbsp;mm fine stainless steel). Optional V1002-8 eight-channel adapter and V0020-QD quick disconnect kit sold separately.

Hydrophobic filter, pk/1 ( 1 each included)

V0020-F1 by Benchmark Scientific is a hydrophobic antibacterial replacement filter (pk/1) for the Accuris V0020 Aspire Laboratory Aspirator. Protects the vacuum pump from aerosol and liquid contamination. Replace at routine maintenance intervals for consistent aspirator performance.

Option quick disconnect kit, includes 2 male/female attachments & silicone tubing

V0020-QD by Benchmark Scientific — Quick Disconnect Kit for the Aspire™ V0020 Laboratory Aspirator. Includes 2 male/female quick-connect fittings and silicone tubing for rapid interchange of the V1002 handheld controller or other aspiration heads without cutting tubing.

Optional eight channel adapter, fine tip stainless steel

V1002-S8 by Accuris Instruments is a fine-tip stainless steel 8-channel adapter for the Aspire™ laboratory aspirator, enabling simultaneous 8-well aspiration across 96-well microplates and strip tubes. Constructed from durable stainless steel, it replaces single-pass aspiration for ELISA wash steps, cell culture media removal, and high-throughput assay workflows.

Optional eight channel adapter, for use with 200ul pipette tips

V1002-8 by Accuris Instruments is an optional 8-channel adapter for the ASPIRE™ Lab Aspirator (V0020), enabling simultaneous aspiration from 8 wells using 200 µl pipette tips. POM construction, fully autoclavable. Order via mbpinc.net/quickorder or customerservice@mbpinc.net.

Optional single channel adapter, extra long (80mm) stainless steel

V1002-1SL by Benchmark Scientific -- extra-long 80 mm stainless steel single-channel adapter (Adapter D) for the Aspire? V0020 Lab Aspirator and V1002 Handheld Controller. Twice the reach of the standard 40 mm Adapter C; ideal for 50 mL conicals, deep-well plates, and narrow-neck bottles.

Silicone O-ring for Aspire PC Collection Bottle

The V0020-SG by Benchmark Scientific is a replacement silicone O-ring for the 2 L polycarbonate collection bottle lid of the Aspire Laboratory Aspirator (V0020 and V0020-E). Replace when vacuum hold is reduced or the O-ring shows visible wear. Direct OEM replacement part. Sold individually. Compatible with V0020-BOT collection bottle. Pair with V0020-F1 hydrophobic filter replacement for full preventive maintenance.