Supplements & Additives

<h2 data-section-id="3d1466" data-start="0" data-end="47">What are cell culture buffers and solutions?</h2>
&nbsp;
Cell culture buffers and balanced salt solutions are isotonic solutions used to wash, dilute, transport, and temporarily maintain cells outside of complete growth media. Unlike culture media, these solutions do not contain the nutrients and growth factors required for cell proliferation. Instead, their primary role is to maintain physiological pH and osmotic balance while protecting cells from stress during handling and experimental procedures.
The most commonly used cell culture buffers include PBS (Phosphate-Buffered Saline), DPBS (Dulbecco's Phosphate-Buffered Saline), HBSS (Hank's Balanced Salt Solution), and EBSS (Earle's Balanced Salt Solution). These solutions are widely used in cell washing, passaging, tissue dissociation, sample preparation, immunoassays, and short-term cell maintenance.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Standard Isotonic Buffers to wash cells, maintain osmotic balance, and dilute reagents.</li>
<li dir="ltr" role="presentation">Biological Buffering Agents for metabolic support and pH maintenance.</li>
<li dir="ltr" role="presentation">Cell Dissociation &amp; Neutralizing Reagents maintain high cell viability and are used for cell recovery, detachment, and passaging</li>
<li dir="ltr" role="presentation">Surface Coating &amp; Matrix Solutions with high-grade gelatin for improved cell attachment.</li>
<li dir="ltr" role="presentation">Insulin-Transferrin-Selenite (ITS), Bovine Serum Albumin (BSA), and high-purity Holo-Transferrin for enhanced cell growth and viability</li>
</ul>
&nbsp;
<h2 data-section-id="1cuz7jf" data-start="1165" data-end="1216">How to choose cell culture buffers and solutions</h2>
&nbsp;
PBS vs. DPBS PBS is a simple sodium chloride/phosphate buffer solution. DPBS adds potassium chloride and may include calcium, magnesium, glucose, and pyruvate depending on formulation. The practical difference between PBS and DPBS formulations is minimal &mdash; both maintain pH 7.2-7.4 and osmolality ~280-315 mOsm/kg and are functionally interchangeable for standard washing, immunoassay, and sample preparation applications. If your protocol is sensitive to minor salt concentration differences, compare specific formulation sheets rather than assuming equivalence. &nbsp; Calcium/magnesium-free vs. calcium/magnesium-containing Calcium and magnesium facilitate cell-cell and cell-surface adhesion. Calcium/magnesium-free PBS, DPBS, or HBSS is required: before enzymatic dissociation (residual Ca/Mg inhibits trypsin, requiring more enzyme and harsher conditions &mdash; the most common cause of poor trypsinization results), for rinsing EDTA or other chelators from culture, and for minimizing cell-cell aggregation during gentle dissociation or suspension recovery. Calcium/magnesium-containing formulations support cell binding and clumping, useful for transport applications or attachment-dependent procedures. &nbsp; HBSS/EBSS vs. PBS/DPBS for short-term maintenance HBSS and EBSS include sodium bicarbonate buffering and may include glucose, providing meaningfully better short-term physiological support for cells &mdash; particularly under CO₂ atmosphere &mdash; than the simpler PBS/DPBS formulations. Use HBSS/EBSS when cells need to remain viable for a meaningful period outside complete growth media (tissue dissociation workflows, transport, short-term holding). Use PBS/DPBS for washing steps, immunoassay/Western blot dilutions, and sample preparation where osmotic balance &mdash; not metabolic support &mdash; is the requirement. &nbsp; Phenol red and glucose/pyruvate variants DPBS and HBSS are available with or without phenol red and with or without glucose/pyruvate, allowing matching to downstream applications (phenol red-free for fluorescence work; glucose/pyruvate-containing for short-term metabolic support). &nbsp; Endotoxin and quality testing Regular quality testing of balanced salt solutions includes osmolality, pH, stability, and screening for endotoxins and bacterial/fungal contamination. For immune cell handling and other endotoxin-sensitive applications, premium formulations document endotoxin levels below 0.005 EU/mL &mdash; a meaningfully tighter specification than standard research-grade buffers. &nbsp; Powder vs. liquid format Powdered balanced salt solutions are manufactured without sodium (to avoid sodium bicarbonate off-gassing during storage), requiring sodium bicarbonate addition, pH adjustment, and sterile filtration at time of preparation &mdash; following the same principle as powdered classic media.Specifications context
&nbsp;
<h2>Specifications context</h2>
&nbsp;
Most balanced salt solutions are formulated to maintain physiological conditions with a pH of approximately 7.2&ndash;7.4 and osmolality ranging from about 280&ndash;315 mOsm/kg. These properties help minimize osmotic stress and maintain cell viability during handling.
Calcium- and magnesium-free DPBS remains one of the most commonly specified buffers for cell dissociation workflows because it improves the effectiveness of trypsin and other detachment enzymes. HBSS and EBSS continue to be widely used when short-term metabolic support is required outside complete growth media.
<a href="https://mbpinc.net/contact-us">Contact the expert team</a> at MBP today to get high-purity buffers and solutions for your lab.

Buffers & Solutions

Buffers/Salts

1M HEPES

Unit Quantity

Sterility

Appearance

Shipping Conditions

Storage Condition

Disclaimer

Shipping Condition

<h2 data-section-id="1go10h8" data-start="173" data-end="215">What are classic cell culture media?</h2>
&nbsp;
Classic cell culture media refers to the foundational basal medium formulations that have underpinned mammalian cell culture since the mid-20th century: DMEM (Dulbecco's Modified Eagle Medium), MEM (Minimum Essential Medium), RPMI 1640, Ham's Nutrient Mixtures F-10 and F-12, IMDM (Iscove's Modified Dulbecco's Medium), and the combination formulation DMEM/F-12. Each is manufactured according to its originally published formula, with modifications limited to those necessary for consistent performance and stability of the medium over its shelf life. These media supply the amino acids, vitamins, glucose, salts, and (in most formulations) phenol red pH indicator that form the nutritional backbone of essentially all subsequent specialty, serum-free, and Advanced media derivatives.
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" role="presentation">Selective Mammalian Antibiotics including Puromycin, Geneticin, and Hygromycin B for stable development of cell lines.</li>
<li dir="ltr" role="presentation">Broad-Spectrum Bactericidal Agents for routine contamination prevention, including Penicillin/Streptomycin and Gentamicin&nbsp;</li>
<li dir="ltr" role="presentation">Prokaryotic Selection Reagents for effective bacterial transformation, including Ampicillin, Kanamycin, Chloramphenicol, and Tetracycline&nbsp;</li>
<li dir="ltr" role="presentation">Antifungal and Antimycotic Solutions to maintain sterile cultures, including combined 100X cocktails and Amphotericin B (Fungizone)&nbsp;</li>
<li dir="ltr" role="presentation">Specialized Small Molecules for targeted biochemical assays, including Ganciclovir, Rapamycin, and Actinomycin D&nbsp;</li>
</ul>
&nbsp;
<h2 data-section-id="1mfajxk" data-start="1218" data-end="1252">How to choose a classic medium</h2>
&nbsp;
DMEM vs MEM
DMEM contains up to four times the amino acid and vitamin concentration of original Eagle's MEM, along with higher glucose levels, making it suitable for cell types with elevated nutrient demands &mdash; DMEM is broadly applicable across mammalian, insect, and plant cell phenotypes including primary cells, stem cells, and transformed lines. MEM remains widely used for monolayer culture of many standard cell types, with optional Hanks' or Earle's salt formulations and a calcium-free modification that permits suspension growth.
RPMI 1640 for suspension and hematopoietic culture
RPMI 1640, developed at the Roswell Park Memorial Institute for culturing human leukemic cells, is optimized for non-adherent cell types &mdash; lymphocytes and other blood cells &mdash; and contains glutathione plus higher biotin, B12, and PABA concentrations than DMEM or MEM. Despite its hematopoietic origin, RPMI 1640 supports a broad range of adherent lines (HeLa, T47D, RENCA, CT26.WT) when properly supplemented.
Ham's F-10/F-12 for CHO and specialized applications
Ham's nutrient mixtures were originally developed for CHO cell clones, HeLa cells, and mouse L-cells, and remain suited to hepatocyte culture, viral fusion experiments, and toxicity assays, with formulations available for use with or without serum. Coon's modification of Ham's F-12 roughly doubles the amino acid and pyruvate content and adds ascorbic acid, developed specifically for hybrid cells produced by viral fusion.
DMEM/F-12 for complex, rich-medium applications
DMEM/F-12 (1:1 mixture) combines DMEM's glucose, amino acid, and vitamin richness with Ham's F-12's zinc, putrescine, hypoxanthine, and thymidine, producing an extremely rich complex medium used for MDCK cells, glial cells, fibroblasts, and human endothelial cells &mdash; and serving as the basal medium for many serum-free Advanced formulations used in organoid and stem cell work.
IMDM for high-density rapid proliferation
IMDM further enriches DMEM with additional amino acids and vitamins, substituting potassium nitrate for ferric nitrate and adding HEPES and sodium pyruvate. IMDM's sodium bicarbonate buffer system (5&ndash;10% CO₂) and enriched composition make it well suited for rapidly proliferating, high-density cultures including Jurkat, COS-7, and macrophage cells.
Liquid vs. powder format
Liquid classic media are ready to use (after appropriate FBS and supplement addition) and include sodium bicarbonate in the formulation. Powdered media are manufactured without sodium bicarbonate, since it tends to off-gas in powder form &mdash; 3.7 g/L sodium bicarbonate must be added upon reconstitution, followed by sterile filtration. Powder formats offer cost and shipping-weight advantages for high-volume labs preparing their own media.
&nbsp;
<h2 data-section-id="17i0pj" data-start="5035" data-end="5061">Specifications context</h2>
&nbsp;
Classic media are manufactured according to originally published formulas, with stability-related modifications documented per product. DMEM's sodium bicarbonate buffer system at 3.7 g/L is standard across liquid formulations; powdered formats require this addition upon reconstitution along with 0.22 &micro;m sterile filtration. As of 2026, DMEM, DMEM/F-12, and RPMI 1640 remain the three most widely specified classic media across academic and biomanufacturing labs, with IMDM increasingly used for high-density suspension applications in bioprocessing.
For recombinant growth factors and cytokines used alongside classic media, see Recombinant Proteins. For supplementation reagents (GlutaMAX, NEAA, sodium pyruvate, HEPES), see Cell Culture Supplements &amp; Additives. Browse Mammalian Cell Culture for the broader category.
<a href="https://mbpinc.net/contact-us">Contact the expert team </a>at MBP to get highly efficient microbial control solutions for your lab.

Antibiotics

MSDS

Actinomycin D

Concentration

Shipping condition

Amphotericin B (Fungizone)

G274 by ABM (Applied Biological Materials) is Amphotericin B (Fungizone) — 100 mL sterile solution, 250 µg/mL Amphotericin B and 205 µg/mL deoxycholic acid in sterile ddH₂O. Antifungal supplement for cell culture. Store at –20°C. Research use only.

Usage

Ampicillin

Antibiotic/Antimycotic (100X)

G273 by ABM is a 100X Antibiotic/Antimycotic solution (100 mL) containing penicillin G (10,000 U/mL), streptomycin sulfate (10,000 µg/mL), and amphotericin B (25 µg/mL). Use at 1% v/v in mammalian cell culture medium. Store at −20°C.

Apo-Transferrin

G422-lot. E05091642E CoA

Applied Cell Extracellular Matrix

G422 by ABM — Applied Cell Extracellular Matrix, 25 mL liquid protein coating for cell adhesion, growth, differentiation, and migration. Apply as thin film (75 µL per 96-well to 15–17 mL per T175 flask) or solid gel. Store at 4–8°C, do not freeze, 1-year shelf life. Lot-tested negative for bacterial and fungal contamination.

BacAway

G285 BacAway by ABM — 10 mL antibiotic cocktail for eliminating gram-positive and gram-negative bacterial contamination from mammalian cell cultures. Working dilution 1:50 in culture medium. Store at −20°C.