Name: BioClave™ Autoclaves
SKU: B4000-18
Availability: InStock

Autoclaves

<h2>What Are Laboratory Autoclaves?</h2>
&nbsp;
Laboratory autoclaves (steam sterilizers) use pressurized saturated steam at 121&deg;C or 134&deg;C to destroy all microbial life&mdash;bacteria, viruses, fungi, and heat-resistant bacterial spores&mdash;achieving a validated sterility assurance level (SAL) of 10⁻⁶. At 15 psi above atmospheric pressure, steam reaches 121&deg;C; at 30 psi, it reaches 134&deg;C. Autoclaves are the most widely used sterilization method in research, clinical, and pharmaceutical laboratories for sterilizing glassware, culture media, biohazardous waste, instruments, and porous loads. Two main cycle types are used: gravity-displacement (steam displaces air downward via gravity, suited to liquids and solid instruments) and pre-vacuum (a vacuum pump removes air before steam injection, required for porous, wrapped, and hollow loads).
&nbsp;
<h2 dir="ltr">What you will find:</h2>
&nbsp;
<ul>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
BioClave&trade; Autoclaves: Reliable benchtop autoclaves for routine laboratory sterilization
</li>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Autoclave Printer (115V): Built-in or external printer for cycle data recording and compliance
</li>
</ul>
&nbsp;
<a href="https://mbpinc.net/equipments/autoclave-and-biosafety-cabinets/autoclave/autoclave-accessories">Autoclave Accessories:</a>
<ul>
<li dir="ltr" style="font-family: helvetica, arial, sans-serif;" aria-level="1">
Autoclave Printer Paper (2.25" x 50 ft): Thermal paper rolls for printing sterilization cycle reports
</li>
</ul>
&nbsp;
<h2>How to Choose a Laboratory Autoclave</h2>
&nbsp;
Chamber Volume and Format
A 16&ndash;28 L benchtop autoclave handles a single researcher's daily glassware and media loads. A 50 L benchtop unit or a 80&ndash;150 L floor-standing model is appropriate for core facilities, BSL-3 labs, or any setting processing biohazardous waste in volume. Allow 25&ndash;30% headspace above the load for adequate steam circulation.
Cycle Type: Gravity vs. Pre-Vacuum
Gravity cycles are standard for liquids, unwrapped solid instruments, and glassware. Pre-vacuum cycles are required for wrapped instruments in peel pouches, porous loads (cloth, gauze, textiles), and hollow instruments with lumens where air must be removed for steam to penetrate. If your lab runs both load types, specify a unit with both cycle programs.
Temperature Programs
Standard units run 121&deg;C gravity and 134&deg;C prevac cycles. Labs processing a broad mix of materials benefit from models with additional preset programs: liquid sterilization with slow exhaust, prion deactivation cycles (134&deg;C extended hold), biohazardous waste cycles, and drying cycles for instruments.
Water Quality Requirement
Distilled or deionized water with a conductivity below 5 &micro;S/cm is required for steam generation in all laboratory autoclaves. Hard tap water causes mineral scale on heating elements, chamber walls, and sensors, reducing sterilization efficiency and cutting autoclave service life significantly.
Monitoring and Documentation
For GLP, GMP, or IACUC-regulated labs, specify a model with an integrated temperature/pressure data logger and printer output. This documents each cycle's sterilization conditions for audit purposes. Combine with biological indicator (spore) testing at minimum every 6 months&mdash;the only verification method that directly confirms microbial kill.
&nbsp;
<h2>Specifications Context</h2>
&nbsp;
The two standard steam sterilization conditions are 121&deg;C for a minimum hold of 15 minutes (gravity cycle) and 134&deg;C for a minimum hold of 3 minutes (prevac cycle). Actual load-specific validated times typically exceed these minimums. Biological indicator testing using&nbsp;Geobacillus stearothermophilus spore strips at 55&ndash;60&deg;C incubation is the only method that directly verifies sterilization efficacy at 121&ndash;135&deg;C. Chemical indicators (autoclave tape, integrators) provide visual confirmation that surface conditions were met but do not verify inner-load temperatures. Poor-quality feed water deposits scale on chamber walls and heating elements, reducing heat transfer efficiency, degrading sensors, and shortening autoclave lifespan&mdash;distilled or deionized water below 5 &micro;S/cm is required.
<a href="https://mbpinc.net/contact-us">Contact the expert team</a> at Molecular Biology Products Inc. now to find the right autoclave for your lab.

Autoclave

Chamber Specifications

BioClave™ Autoclaves

B4000-18 by Benchmark Scientific is the BioClave™ 18-liter benchtop research autoclave, operating at 121°C or 134°C (selectable) at 29 PSI with a built-in water tank and fully automatic single-button operation. The stainless-steel chamber (9.8 × 13.77 in) accommodates flasks, bottles, bags, and instruments; mechanical and electrical interlocks prevent door opening until pressure reaches 0 PSI.

BioClave™ Autoclaves

SKU : B4000-18