Filter Tips

How To Choose The Right Filter Tips For Your Experiment?

Filter Tips

Even the best-calibrated pipette can lose its accuracy and precision if you use the wrong kind of tips. Depending on the experiment you are doing, the wrong kind of tips can also make your pipette a source of contamination, waste valuable samples or reagents, or even cause you to get a repetitive stress injury (RSI). So many different kinds of tips are available.

Choose Filter Pipette Tips For Accuracy And Precision

When thinking about which type of tip to choose, precision and accuracy are usually the first things that come to mind. If the shape of the pipette tips changes from batch to batch or even within a batch, then you won’t be able to pipette accurately.

If the tip doesn’t fit your pipette well, it can change how accurate your pipette is. If there isn’t a good seal between the barrel and the tip of your pipette, the air you draw in can escape, and you don’t get the right amount of liquid. So, the final amount that was given out is not exactly right. So should be very careful while choosing a pipette tip.

Universal Or Pipette-Specific Tips?

High-quality universal tips are the best choice for your pipette and its use. Most micropipettes on the market can be used with these tips. Universal tips are made to fit securely and tightly around all pipette barrels, which vary slightly in diameter from one manufacturer to the next.

For example, Hamilton filter tips are flexible at the end closest to the barrel. This makes them fit better with a wider range of pipette types. is a place where you can find tips that apply to everyone (aerosol barrier, graduated, ergonomic, etc.).

Filter & Non-Filter Tips

Barrier tips, which can also be called filter tips, are made for different situations. If you are pipetting something that could contaminate your pipette, like volatile, corrosive, or viscous chemicals, you may want to use barrier tips to protect your pipette and your samples.

On the other hand, Non-filter tips can be used with a variety of liquids and pipettes that aren’t in danger of contamination. Primarily, they are used to pour reagents and other non-corrosive chemicals into the container.

Tips For Low Retention

No matter which tip you choose, the fact that it is easy to forget is a key point. Low-retention tips do just what their name says. They hold a small amount of liquid. If you’ve ever looked at the tip of a standard pipet after dispensing, you might have seen a small amount of liquid left over. This is less likely to happen with low-retention tips, which have a hydrophobic plastic additive that keeps liquid from sticking to the inside of the tips.

Ergonomic Tips

Pipetting is a repetitive task that can hurt your joints and lead to a repetitive stress injury (RSI). Because of this, companies have come up with ergonomic tips that require less force to insert and remove, which lowers the risk of RSI. So, this feature is all about how well it fits. Biomek pipette tips are a good option for this, as they work well in multiple options. By definition, an ergonomic tip is one that is made to fit your pipette perfectly.

Wrap Up:

Molecular Biomedical equipment is to be chosen for high precision and accuracy. Filter tips are one of those devices that save samples from contamination and pour in the right quantity. Choose the filter tip that fits fixed on the pipette and does not get loose. Along with this, choosing the right type, like filter or non-filter, low-retention, and universal or specific, is a necessary part of the experiment.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *