SDS13.V
Overview
A set of 13mm diameter (ID) hardened steel dry vacuum pressing die set for pellet presses, ready for you to make 13mm diameter cylinder-shape pellets in a vacuum condition.
![](https://mbpinc.net/wp-content/uploads/2023/06/product-196.jpg")
Die set includes
- Two 13mm ID core dies made of highly polished hardened steel
- One steel sleeve with vacuum connector
- One steel support plate
- One pushing rod
- Rubber sealing o-rings
- One steel cylinder pellet ejector
Important
- Always wear protection goggles and gear during operation
- Clean the die set throughout with absolute ethyl alcohol and keep them in a dry box with silica gel after use to avoid rusting on the surface.
- Never fill the die more than 1/3 its sleeve height with your sample and do not apply pressure beyond 15 tons. Across International is not responsible for any damage caused by misuse.
SDS25.V
Overview
A set of 25mm diameter (ID) hardened steel dry vacuum pressing die set for pellet presses, ready for you to make 25mm diameter cylinder-shape pellets in a vacuum condition.
Die set includes
- Two 25mm ID core dies made of highly polished hardened steel
- One steel sleeve with vacuum connector
- One steel support plate
- One push rod
- Rubber sealing o-rings
- One steel cylinder pellet ejector
Important
- Always wear protection goggles and gear during operation
- Clean the die set throughout with absolute ethyl alcohol and keep them in a dry box with silica gel after use to avoid rusting on the surface.
- Never fill the die more than 1/3 its sleeve height with your sample and do not apply pressure beyond 30 tons. Across International is not responsible for any damage caused by misuse.
SDS6.V
Overview
A set of 6mm diameter (ID) hardened steel dry vacuum pressing die set for pellet presses, ready for you to make 6mm diameter cylinder-shape pellets in a vacuum condition.
Die set includes
- Three 6mm ID core dies made of highly polished hardened steel
- One sleeve
- One base with 1/4″ hose barb vacuum connection
- Two push rods
- Silicon sealing o-rings
- One pellet ejector
- One transparent protection shield
Important
- Always wear protection goggles and gear during operation
- Clean the die set throughout with absolute ethyl alcohol and keep them in a dry box with silica gel after use to avoid rusting on the surface.
- Never fill the die more than 1/3 its sleeve height with your sample and do not apply pressure beyond 4 tons. Across International is not responsible for any damage caused by misuse.
SDS50.V
Overview
A set of 50mm diameter (ID) hardened steel dry vacuum pressing die set for pellet presses, ready for you to make 50mm diameter cylinder-shape pellets in a vacuum condition.
Die set includes
- One 50mm diameter core die
- One sleeve
- One support base with 1/4″ hose barb vacuum connection
- One push rod with detachable handle
- Rubber sealing gasket
- One pellet ejector
- One aluminum carrying case
Important
- Always wear protection goggles during operation
- Clean the die set throughout with absolute ethyl alcohol and keep them in a dry box with silica gel after use to avoid rusting on the surface.
- Never fill the die more than 1/3 its sleeve height with your sample and do not apply pressure beyond 100 tons. Across International is not responsible for any damage caused by misuse.
| SDS6.V | SDS13.V | SDS625.V | SDS50.V | |
| Maximum Pressure | 4 tons | 15 tons | 30 tons | 100 tons |
| Rockwell Hardness | Rc 62 | |||
| Diameter (ID) | 6mm | 13 mm | 25 mm | 50 mm |
| Height | 60 mm (assembled without sample) | 75 mm (Assembled without sample) | 105 mm (Assembled without sample) | 135 mm (Assembled without sample) |
| Sleeve Height | 30 mm | 40 mm | 50 mm | 76 mm |
| Sleeve Diameter (OD) | 30 mm | 39 mm | 46 mm | 83 mm |
| Tolerance | 0.01-0.02 mm (10-20 micron) | |||
| Max sample fill height | Not to exceed 1/3 of the sleeve height | |||
| Material Core die & push rod | W18Cr4V hardened carbon tool steel | |||
| Material Sleeve, ejector & Support | Cr12 hardened carbon mold steel | |||
Reviews
There are no reviews yet.