Features
- PSI peer reviewed to be used in a C1D1 environment.
- Thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.
- Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculating fluid temperature and gives you best control over your work. It also help prevents frost to form on the outside of the vessel, allowing you to see clearly into your material.
- Solvent-resistant PTFE on all sealing components ensures long time durability and operation.
- All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.
- Adjustable stirring rate provides great torque or high speed.
- Patented PTFE stirring rod bearing for reliable and quiet operation.
- Optional multi-layer stirring blades for optimal reaction results.
- Wide range of temperature operations, from -110F to 400F.
- Large condenser cooling surface for exceptional condensation performance.
- Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.
- Easily visual operation with digital speed and temperature displays.
- Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)
- One year warranty and lifetime US-based parts, service, and support.
Model | R10ex | R20ex | R50ex | R100ex |
Electrical requirements
|
220V 50/60Hz single phase | 220V 50/60Hz single phase | 220V 50/60Hz single phase | 220V 50/60Hz single phase |
Explosion-proof parts (Made in USA) |
* Explosion-proof motor: 1/3 HP, 250 watts * Explosion-proof controller and enclosure * Explosion-proof power connection and cable management PSI peer reviewed, for use with Ethanol, Pentane, Hexane, Heptane, Isopropyl Alcohol/Acetone, and Methanol. |
* Explosion-proof motor: 1/3 HP, 250 watts * Explosion-proof controller and enclosure * Explosion-proof power connection and cable management PSI peer reviewed, for use with Ethanol, Pentane, Hexane, Heptane, Isopropyl Alcohol/Acetone, and Methanol. |
* Explosion-proof motor: 3/4 HP, 560 watts * Explosion-proof controller and enclosure * Explosion-proof power connection and cable management PSI peer reviewed, for use with Ethanol, Pentane, Hexane, Heptane, Isopropyl Alcohol/Acetone, and Methanol |
* Explosion-proof motor: 1 HP, 750 watts * Explosion-proof controller and enclosure * Explosion-proof power connection and cable management PSI peer reviewed, for use with Ethanol, Pentane, Hexane, Heptane, Isopropyl Alcohol/Acetone, and Methanol |
Volume | Main vessel: 10 liters (2.6 gallons) Fluid jacket: 3 liters (0.8 gallons) |
Main vessel:Â 20 liters (5.3 gallons) Fluid jacket: 6 liters (1.6 gallons) |
Main vessel:Â 50 liters (13 gallons) Fluid jacket: 16 liters (4.2 gallons) |
Main vessel:Â 100 liters (26 gallons) Fluid jacket: 30 liters (8 gallons) |
Material | Vessel, condenser, feeding funnel and receiving flask: borosilicate glass 3.3 Agitator: 304 stainless steel with PTFE coating Sealing gaskets: PTFE |
Vessel, condenser, feeding funnel and receiving flask: borosilicate glass 3.3 Agitator: 304 stainless steel with PTFE coating Sealing gaskets: PTFE |
Vessel, condenser, feeding funnel and receiving flask: borosilicate glass 3.3 Agitator: 304 stainless steel with PTFE coating Sealing gaskets: PTFE |
Vessel, condenser, feeding funnel and receiving flask: borosilicate glass 3.3 Agitator: 304 stainless steel with PTFE coating Sealing gaskets: PTFE |
Glass vessel temperature range | -80C to +200C (-112F to +400F) | -80C to +200C (-112F to +400F) | -80C to +200C (-112F to +400F) | -80C to +200C (-112F to +400F) |
Vacuum & pressure
|
Ultimate vacuum: < 700 Torrs Display: mechanical vacuum gauge Maximum fluid jacket pressure: 4.4 psi or 0.03 MPa |
Ultimate vacuum: < 700 Torrs Display: mechanical vacuum gauge Maximum fluid jacket pressure: 4.4 psi or 0.03 MPa |
Ultimate vacuum: < 700 Torrs Display: mechanical vacuum gauge Maximum fluid jacket pressure: 4.4 psi or 0.03 MPa |
Ultimate vacuum: < 700 Torrs Display: mechanical vacuum gauge Maximum fluid jacket pressure: 4.4 psi or 0.03 MPa |
Weight and dimensions | Unit: 18 x 26 x 78″ (WxDxH fully setup) Drain port ground clearance: 13″ Shipping: 26 x 67 x 26″ (WxDxH), 240 lbs |
Unit: 20 x 27 x 80″ (WxDxH fully setup) Drain port ground clearance: 13″ Shipping: 24 x 75 x 31″ (WxDxH), 280 lbs |
Unit: 26 x 33 x 85″ (WxDxH fully setup) Drain port ground clearance: 12.5″ Shipping: 27 x 80 x 32″ (WxDxH), 330 lbs |
Unit: 28 x 42 x 95″ (fully setup) Drain port ground clearance: 13.5″ Shipping: 26 x 88 x 45″, 460 lbs |
Warranty | One year | One year | One year | One year |
 Part description |  Quantity |
Part image |
 Jacketed glass vessel (Single or Dual), lid, clamps and heavy-duty stainless steel stand with casters (shipped pre-assembled) | 1 set | ![]() |
 Glass vessel insulation jacket with openable viewing window (only for SINGLE JACKET REACTOR) | 1 pc | ![]() |
 Rubber bumper (pre-assembled) | 1 pc | ![]() |
 Lid gaskets (pre-assembled) | 1 set | ![]() |
 Upper and lower clamp set (preassembled) | 1 set | ![]() |
 Vertical condenser with dual cooling coils, 2 chilling fluid ports, and 1 vacuum port, glass | 1 pc | ![]() |
 Glass condenser dispenser with drain port and PTFE open/close valve | 1 set | ![]() |
 Glass bottom drain port with PTFE open/close valve | 1 set | ![]() |
 Glass vacuum valve (R-GVV34) | 1 set | ![]() |
 Glass material feeding funnel, lid, and PTFE open/close valve | 1 set | ![]() |
 Explosion-proof controller | 1 pc | ![]() |
 Explosion-proof stirring motor and motor support | 1 set |  ![]() |
 Mechanical vacuum gauge with two 3/8″ hose barb ports | 1 pc | ![]() |
 Explosion-proof temperature probe with PTFE seal | 1 pc | |
 PTFE stirring blades (1 blade for R10/R20 and 2 blades for R50), stainless steel rod with PTFE liner | 1 pc | ![]() |
 Insulated hose with drain port & open/close valve x 2 3/8″ Stainless steel hose barb adapters x 2 |
4 pcs | ![]() ![]() ![]() |
 PTFE sealing tape | 1 pc | ![]() |
 PTFE stirring rod positioner/bearing kit | 1 set | ![]() |
 Condenser dispenser connection kit | 1 set | ![]() |
 Large opening material feeding port kit | 1 set | ![]() |
 Bottom drain port sealing flange |  1 set | ![]() |
 Rubber-wrapped condenser dispenser support and condenser bracket | 3 pcs | ![]() |
 Chilling fluid connector x 2, vacuum connector x 1, Gaskets | 3 sets | ![]() |
 Allen key (x 3) and backup inner hex set screws (6) and bolts (2) | 1 set | ![]() |
 Hose Clamps | 5 pcs | ![]() |
 Zip Clamps | 15 pcs | ![]() |
 Motor guard cup | 1 pc | ![]() |
Motor Shaft Universal Joint | 1 pc | ![]() |
 Frame Parts (For R10 & R20) |
8 pcs | ![]() |
 Explosion-proof quick installation guide | 1 pc | ![]() |
 User’s manual | 1 pc | ![]() |
Reviews
There are no reviews yet.