Overview
Ai 316L Grade Stainless Steel Reactor Features
- Dual jacketed. Sealed outer insulation jacket provides best temperature performance inside chamber
- All wetted parts on main vessel and lid built with pharmaceutical grade 316L SST
- Shell and tube heat exchanger with 70 tubes for the best condensing results
- ElectroPolished internal chamber
- Greatly reduces surface roughness by leveling micro-peaks and valleys
- Improved vacuum pressures, out-gassing rates, and pumping speed
- Prolong equipment lifespan by reducing friction and wear
- Much better sterilized and semiconductor grade surface
- Essential for the food and pharmaceutical industries
- https://hollandaptblog.com/2014/03/20/what-is-electropolishing-and-why-is-it-so-important-in-the-pharmaceutical-industry
- Detachable condenser and collection tanks
- Dual collection tanks with big sight glass allows you to drain without breaking vacuum
- High drain port clearance for easy draining or added filtration
- Large ports (top 12″ bottom 6″) allows easy chamber cleaning
- Top placed vacuum port on condenser provides better flow and condensing results
- No messy cable, with space saving integrated stirring motor controller
- Heavy-duty stainless-steel frame with swivel casters
- Built-in flashlight gives you a clear view inside the chamber
- Positive/negative pressure gauge
- Matte finish stainless steel
- Customizable lid for various application
- Tons of tri clamps adapters available, e.g. tri clamp to hose barb/KF25/NPT
- Choice of bolted or pin clamp for various pressure applications
- Flexible bellow condenser connection reduces shipping damage
- Electric motor and controller model is ETL certified to UL and CSA standards
- Peer reviewed model (pneumatic motor and controller) is approved to be used with Acetone, Ethanol, Heptane, Hexane, Isopropyl Alcohol, Methanol, and Pentane.
CAUTION!
- Across International is not responsible for caustic chemical related damage to the stainless steel reactor internal and external parts and components.
- Never fill circulated heaters or chillers with water, always use Ai or manufacturer’s recommended thermal fluid
- Always leave ample fluid space in heater reservoir to allow fluid heat expansion
- Always keep system vacuum passage or drain valve open when heating up circulation jackets
- Always make sure your vacuum pumps and diffusion pump fluid is clean and within limits
Huber Unistat 510 adapters, tubing and fluid for SR100 stainless steel reactors for Crystallization
- P/N 6165 x 1 M60 (-60 to 115) 5L – fluid
- P/N 6166 x 3 M60 (-60 to 115) 10L – fluid
- P/N 6461 x 2 90 degree M30 X 1.5 (male) to M30 X 1.5 (female)
- P/N 6427 x 2 Hose MT-350-2-M30x1,5 (f)
- P/N 13255 x 2 M30 X 1.5 (male) to 1″ NPT (male)
SPECIFICATIONS:
 Model |
 SR100 |
 Electric stirring motor |  220V, 50/60Hz, 1~Phase, 200 watts, 1/4 HP Rotation: 450 rpm max. (±8%) Starting torque: 3.0 N.m Rated toruqe: 1.54 N.m Built-in gearbox ratio: 3:1 to 180:1 Controller: Delta, UL listed |
 Pneumatic stirring motor |  – Power: 1/4 HP – Rotation: 450 rpm max. (±8%) – Compressed air pressure range: 30 to 80 psi (0.2 to 0.55 MPa) – Working temperature: -10C to +70C – For constant use: set rpm to 80% of maximum rpm – Motor lubricant
 – Air lubricant
 – For safety purpose, detach compressed air supply when not in use, left un-attended or at night |
 Port configuration |  Lid: 6″ triclamp Center motor port: 3″ triclamp Drain port: 6″ triclamp Drain port on/off valve: 2″ triclamp Vacuum port: 1.5″ triclamp Condenser recirculating fluid port: 1/2″ female NPT Vessel jacket recirculating fluid ports: 1″ female NPT |
 Main vessel |  Volume: 100L Material: 316L grade stainless steel Interior finish: ElectroPolished |
 Agitator |  Structure: propeller, 3-blade, dual-layer (standard) Style: quick-change Material: 316L grade stainless steel Detachable length: 20 inches |
 Center fluid jacket |  Volume: 22L Material: 304 grade stainless steel |
 Outer insulation jacket |  Sealed Material: 304 grade stainless steel |
 Collection tank |  10L x 2 |
 Material |  All wetted parts 316L grade stainless steel on main reactor body Rest of reactor in 304 grade stainless steel |
 Main Condenser |  Style: shell and tube heat exchanger Number of tubes: 70 Condensing area: 0.89 m2 |
 Pressure |  Ultimate vacuum level: 1 Torr |
 Temperature range |  -55°C to +250°C (-67°F to +482°F) |
 Temperature sensor/display |  Regular: BOOST.TTA.0101, -200C to 480C, 50.5 clamp Explosion proof: BOOST.TTA.0102, -200C to 480C, 50.5 clamp |
 Sealing gasket |  Food grade Viton |
 Main Mounting Frame |  Heavy duty 2 x 2″ 304 grade stainless steel, mounted on four casters |
 Drain port ground clearance |  Drain port: 19.5 inches Drain valve: 14 inches |
 Shipping Weight (Unit) |  255 Lbs / 350 Lbs |
 Shipping Dimensions |  38 x 32 x 82″ (WxDxH) |
 Compliance |  ETL tested to UL and CSA standards C1D1 peer review by PSI (optional) |
Standard package
SR100 Air or Electric Motor and Accessories
 Part description |  Quantity |
Part image |
 SR100 stainless steel reactor with electric motor | 1 set | |
 2M KF25 flexible vacuum bellow | 1 pc | ![]() |
 KF25 quick clamp and centering ring | 2 sets | |
 KF25 to 1.5″ Triclamp Adapter | 1 pc | |
 1.5″ Tri-Clamp Gasket (Viton) | 1 pc | ![]() |
 1.5″ Tri-Clamp Single Pin Clamp | 1 pc | ![]() |
 Users manual | 1 pc | ![]() |
Vacuum Pump with Accessories
 Part description |  Quantity |
Part image |
 ULVAC 220V UDP-6 6 cfm 6 torr 2-head diaphragm pump and vacuum hose
KF25 Accessories Package |
1 set | ![]() |
Chiller with Accessories
 Part description |  Quantity |
Part image |
 HUBER Unistat 510 -50°C To 250°C With Pilot ONE | 1 pc |  ![]() |
 Huber expansion tank, adapters, tubing and fluid P/N 6165 x 1   M60 (-60 to 115) 5L – fluid P/N 6166 x 3   M60 (-60 to 115) 10L – fluid P/N 6461 x 2   90 degree M30 X 1.5 (male) to M30 X 1.5 (female) P/N 6427 x 2   Hose MT-350-2-M30x1,5 (f) P/N 13255 x 2 M30 X 1.5 (male) to 1″ NPT (male) |
1 set | Â ![]() |
Reviews
There are no reviews yet.